/** @file The file defines the protocol to obtain input from the ConsoleIn device. The EFI specification requires that the EFI_SIMPLE_TEXT_INPUT_PROTOCOL supports the same languages as the corresponding Copyright (c) 2006 - 2007, Intel Corporation All rights reserved. This program and the accompanying materials are licensed and made available under the terms and conditions of the BSD License which accompanies this distribution. The full text of the license may be found at http://opensource.org/licenses/bsd-license.php THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. **/ #ifndef __SIMPLE_TEXT_IN_EX_H__ #define __SIMPLE_TEXT_IN_EX_H__ #define EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL_GUID \ {0xdd9e7534, 0x7762, 0x4698, { 0x8c, 0x14, 0xf5, 0x85, 0x17, 0xa6, 0x25, 0xaa } } typedef struct _EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL; /** The Reset() function resets the input device hardware. As part of initialization process, the firmware/device will make a quick but reasonable attempt to verify that the device is functioning. If the ExtendedVerification flag is TRUE the firmware may take an extended amount of time to verify the device is operating on reset. Otherwise the reset operation is to occur as quickly as possible. The hardware verification process is not defined by this specification and is left up to the platform firmware or driver to implement. @param This A pointer to the EFI_SIMPLE_TEXT_INPUT_PROTOCOL_EX instance. Type EFI_SIMPLE_TEXT_INPUT_PROTOCOL_EX is defined in this section. @param ExtendedVerification Indicates that the driver may perform a more exhaustive verification operation of the device during reset. @retval EFI_SUCCESS The device was reset. @retval EFI_DEVICE_ERROR The device is not functioning correctly and could not be reset. **/ typedef EFI_STATUS (EFIAPI *EFI_INPUT_RESET_EX) ( IN CONST EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL *This, IN CONST BOOLEAN ExtendedVerification ); // // EFI_KEY_TOGGLE_STATE // typedef UINT8 EFI_KEY_TOGGLE_STATE; #define TOGGLE_STATE_VALID 0x80 #define SCROLL_LOCK_ACTIVE 0x01 #define NUM_LOCK_ACTIVE 0x02 #define CAPS_LOCK_ACTIVE 0x04 /** Definition of EFI_KEY_STATE @param KeyShiftState Reflects the currently pressed shift modifiers for the input device. The returned value is valid only if the high order bit has been set. @param KeyToggleState Reflects the current internal state of various toggled attributes. The returned value is valid only if the high order bit has been set. **/ typedef struct _EFI_KEY_STATE { UINT32 KeyShiftState; EFI_KEY_TOGGLE_STATE KeyToggleState; } EFI_KEY_STATE; /** Definition of EFI_KEY_DATA. @param Key The EFI scan code and Unicode value returned from the input device. @param KeyState The current state of various toggled attributes as well as input modifier values. **/ typedef struct { EFI_INPUT_KEY Key; EFI_KEY_STATE KeyState; } EFI_KEY_DATA; // // Shift State. // // Any Shift or Toggle State that is valid should have // high order bit set. // #define SHIFT_STATE_VALID 0x80000000 #define RIGHT_SHIFT_PRESSED 0x00000001 #define LEFT_SHIFT_PRESSED 0x00000002 #define RIGHT_CONTROL_PRESSED 0x00000004 #define LEFT_CONTROL_PRESSED 0x00000008 #define RIGHT_ALT_PRESSED 0x00000010 #define LEFT_ALT_PRESSED 0x00000020 #define RIGHT_LOGO_PRESSED 0x00000040 #define LEFT_LOGO_PRESSED 0x00000080 #define MENU_KEY_PRESSED 0x00000100 #define SYS_REQ_PRESSED 0x00000200 /** The function reads the next keystroke from the input device. If there is no pending keystroke the function returns EFI_NOT_READY. If there is a pending keystroke, then KeyData.Key.ScanCode is the EFI scan code defined in Error! Reference source not found.. The KeyData.Key.UnicodeChar is the actual printable character or is zero if the key does not represent a printable character (control key, function key, etc.). The KeyData.KeyState is shift state for the character reflected in KeyData.Key.UnicodeChar or KeyData.Key.ScanCode . When interpreting the data from this function, it should be noted that if a class of printable characters that are normally adjusted by shift modifiers (e.g. Shift Key + "f" key) would be presented solely as a KeyData.Key.UnicodeChar without the associated shift state. So in the previous example of a Shift Key + "f" key being pressed, the only pertinent data returned would be KeyData.Key.UnicodeChar with the value of "F". This of course would not typically be the case for non-printable characters such as the pressing of the Right Shift Key + F10 key since the corresponding returned data would be reflected both in the KeyData.KeyState.KeyShiftState and KeyData.Key.ScanCode values. UEFI drivers which implement the EFI_SIMPLE_TEXT_INPUT_EX protocol are required to return KeyData.Key and KeyData.KeyState values. These drivers must always return the most current state of KeyData.KeyState.KeyShiftState and KeyData.KeyState.KeyToggleState. It should also be noted that certain input devices may not be able to produce shift or toggle state information, and in those cases the high order bit in the respective Toggle and Shift state fields should not be active. @param This A pointer to the EFI_SIMPLE_TEXT_INPUT_PROTOCOL_EX instance. @param KeyData A pointer to a buffer that is filled in with the keystroke state data for the key that was pressed. @retval EFI_SUCCESS The keystroke information was returned. @retval EFI_NOT_READY There was no keystroke data available. EFI_DEVICE_ERROR The keystroke information was not returned due to hardware errors. **/ typedef EFI_STATUS (EFIAPI *EFI_INPUT_READ_KEY_EX) ( IN CONST EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL *This, OUT EFI_KEY_DATA *KeyData ); /** The SetState() function allows the input device hardware to have state settings adjusted. @param This A pointer to the EFI_SIMPLE_TEXT_INPUT_PROTOCOL_EX instance. Type EFI_SIMPLE_TEXT_INPUT_PROTOCOL_EX is defined in this section. @param KeyToggleState Pointer to the EFI_KEY_TOGGLE_STATE to set the state for the input device. @retval EFI_SUCCESS The device state was set appropriately. @retval EFI_DEVICE_ERROR The device is not functioning correctly and could not have the setting adjusted. @retval EFI_UNSUPPORTED The device does not support the ability to have its state set. **/ typedef EFI_STATUS (EFIAPI *EFI_SET_STATE) ( IN CONST EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL *This, IN CONST EFI_KEY_TOGGLE_STATE *KeyToggleState ); // // EFI_KEY_NOTIFY // typedef EFI_STATUS (EFIAPI *EFI_KEY_NOTIFY_FUNCTION) ( IN CONST EFI_KEY_DATA *KeyData ); /** The RegisterKeystrokeNotify() function registers a function which will be called when a specified keystroke will occur. @param This A pointer to the EFI_SIMPLE_TEXT_INPUT_PROTOCOL_EX instance. Type EFI_SIMPLE_TEXT_INPUT_PROTOCOL_EX is defined in this section. @param KeyData A pointer to a buffer that is filled in with the keystroke information for the key that was pressed. @param KeyNotificationFunction Points to the function to be called when the key sequence is typed specified by KeyData. @param NotifyHandle Points to the unique handle assigned to the registered notification. @retval EFI_SUCCESS The device state was set appropriately. @retval EFI_OUT_OF_RESOURCES Unable to allocate necessary data structures. **/ typedef EFI_STATUS (EFIAPI *EFI_REGISTER_KEYSTROKE_NOTIFY) ( IN CONST EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL *This, IN CONST EFI_KEY_DATA *KeyData, IN CONST EFI_KEY_NOTIFY_FUNCTION KeyNotificationFunction, OUT EFI_HANDLE *NotifyHandle ); /** The UnregisterKeystrokeNotify() function removes the notification which was previously registered. @param This A pointer to the EFI_SIMPLE_TEXT_INPUT_PROTOCOL_EX instance. @param NotificationHandle The handle of the notification function being unregistered. @retval EFI_SUCCESS The device state was set appropriately. @retval EFI_INVALID_PARAMETER The NotificationHandle is invalid. **/ typedef EFI_STATUS (EFIAPI *EFI_UNREGISTER_KEYSTROKE_NOTIFY) ( IN EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL *This, IN EFI_HANDLE NotificationHandle ); /** The EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL is used on the ConsoleIn device. It is an extension to the Simple Text Input protocol which allows a variety of extended shift state information to be returned. @param Reset Reset the ConsoleIn device. See Reset(). @param ReadKeyStrokeEx Returns the next input character. See ReadKeyStrokeEx(). @param WaitForKeyEx Event to use with WaitForEvent() to wait for a key to be available. @param SetState Set the EFI_KEY_TOGGLE_STATE state settings for the input device. @param RegisterKeyNotify Register a notification function to be called when a given key sequence is hit. @param UnregisterKeyNotifyRemoves A specific notification function. **/ struct _EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL{ EFI_INPUT_RESET_EX Reset; EFI_INPUT_READ_KEY_EX ReadKeyStrokeEx; EFI_EVENT WaitForKeyEx; EFI_SET_STATE SetState; EFI_REGISTER_KEYSTROKE_NOTIFY RegisterKeyNotify; EFI_UNREGISTER_KEYSTROKE_NOTIFY UnregisterKeyNotify; }; extern EFI_GUID gEfiSimpleTextInputExProtocolGuid; #endif