/** @file This file defines the EFI IPv4 (Internet Protocol version 4) Protocol interface. It is split into the following three main sections: - EFI IPv4 Service Binding Protocol - EFI IPv4 Variable - EFI IPv4 Protocol The EFI IPv4 Protocol provides basic network IPv4 packet I/O services, which includes support for a subset of the Internet Control Message Protocol (ICMP) and may include support for the Internet Group Management Protocol (IGMP). Copyright (c) 2006 - 2008, Intel Corporation All rights reserved. This program and the accompanying materials are licensed and made available under the terms and conditions of the BSD License which accompanies this distribution. The full text of the license may be found at http://opensource.org/licenses/bsd-license.php THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. **/ #ifndef __EFI_IP4_PROTOCOL_H__ #define __EFI_IP4_PROTOCOL_H__ #include #define EFI_IP4_SERVICE_BINDING_PROTOCOL_GUID \ { \ 0xc51711e7, 0xb4bf, 0x404a, {0xbf, 0xb8, 0x0a, 0x04, 0x8e, 0xf1, 0xff, 0xe4 } \ } #define EFI_IP4_PROTOCOL_GUID \ { \ 0x41d94cd2, 0x35b6, 0x455a, {0x82, 0x58, 0xd4, 0xe5, 0x13, 0x34, 0xaa, 0xdd } \ } typedef struct _EFI_IP4_PROTOCOL EFI_IP4_PROTOCOL; typedef struct { EFI_HANDLE InstanceHandle; EFI_IPv4_ADDRESS Ip4Address; EFI_IPv4_ADDRESS SubnetMask; } EFI_IP4_ADDRESS_PAIR; typedef struct { EFI_HANDLE DriverHandle; UINT32 AddressCount; EFI_IP4_ADDRESS_PAIR AddressPairs[1]; } EFI_IP4_VARIABLE_DATA; typedef struct { /// /// The default IPv4 protocol packets to send and receive. Ignored /// when AcceptPromiscuous is TRUE. /// UINT8 DefaultProtocol; /// /// Set to TRUE to receive all IPv4 packets that get through the receive filters. /// Set to FALSE to receive only the DefaultProtocol IPv4 /// packets that get through the receive filters. /// BOOLEAN AcceptAnyProtocol; /// /// Set to TRUE to receive ICMP error report packets. Ignored when /// AcceptPromiscuous or AcceptAnyProtocol is TRUE. /// BOOLEAN AcceptIcmpErrors; /// /// Set to TRUE to receive broadcast IPv4 packets. Ignored when /// AcceptPromiscuous is TRUE. /// Set to FALSE to stop receiving broadcast IPv4 packets. /// BOOLEAN AcceptBroadcast; /// /// Set to TRUE to receive all IPv4 packets that are sent to any /// hardware address or any protocol address. /// Set to FALSE to stop receiving all promiscuous IPv4 packets /// BOOLEAN AcceptPromiscuous; /// /// Set to TRUE to use the default IPv4 address and default routing table. /// BOOLEAN UseDefaultAddress; /// /// The station IPv4 address that will be assigned to this EFI IPv4Protocol instance. /// EFI_IPv4_ADDRESS StationAddress; /// /// The subnet address mask that is associated with the station address. /// EFI_IPv4_ADDRESS SubnetMask; /// /// TypeOfService field in transmitted IPv4 packets. /// UINT8 TypeOfService; /// /// TimeToLive field in transmitted IPv4 packets. /// UINT8 TimeToLive; /// /// State of the DoNotFragment bit in transmitted IPv4 packets. /// BOOLEAN DoNotFragment; /// /// Set to TRUE to send and receive unformatted packets. The other /// IPv4 receive filters are still applied. Fragmentation is disabled for RawData mode. /// BOOLEAN RawData; /// /// The timer timeout value (number of microseconds) for the /// receive timeout event to be associated with each assembled /// packet. Zero means do not drop assembled packets. /// UINT32 ReceiveTimeout; /// /// The timer timeout value (number of microseconds) for the /// transmit timeout event to be associated with each outgoing /// packet. Zero means do not drop outgoing packets. /// UINT32 TransmitTimeout; } EFI_IP4_CONFIG_DATA; typedef struct { EFI_IPv4_ADDRESS SubnetAddress; EFI_IPv4_ADDRESS SubnetMask; EFI_IPv4_ADDRESS GatewayAddress; } EFI_IP4_ROUTE_TABLE; typedef struct { UINT8 Type; UINT8 Code; } EFI_IP4_ICMP_TYPE; typedef struct { /// /// Set to TRUE after this EFI IPv4 Protocol instance has been successfully configured. /// BOOLEAN IsStarted; /// /// Current configuration settings. /// EFI_IP4_CONFIG_DATA ConfigData; /// /// Set to TRUE when the EFI IPv4 Protocol instance has a station address and subnet mask. /// BOOLEAN IsConfigured; /// /// Number of joined multicast groups. /// UINT32 GroupCount; /// /// List of joined multicast group addresses. /// EFI_IPv4_ADDRESS *GroupTable; /// /// Number of entries in the routing table. /// UINT32 RouteCount; /// /// Routing table entries. /// EFI_IP4_ROUTE_TABLE *RouteTable; /// /// Number of entries in the supported ICMP types list. /// UINT32 IcmpTypeCount; /// /// Array of ICMP types and codes that are supported by this EFI IPv4 Protocol driver /// EFI_IP4_ICMP_TYPE *IcmpTypeList; } EFI_IP4_MODE_DATA; #pragma pack(1) typedef struct { UINT8 HeaderLength:4; UINT8 Version:4; UINT8 TypeOfService; UINT16 TotalLength; UINT16 Identification; UINT16 Fragmentation; UINT8 TimeToLive; UINT8 Protocol; UINT16 Checksum; EFI_IPv4_ADDRESS SourceAddress; EFI_IPv4_ADDRESS DestinationAddress; } EFI_IP4_HEADER; #pragma pack() typedef struct { UINT32 FragmentLength; VOID *FragmentBuffer; } EFI_IP4_FRAGMENT_DATA; typedef struct { EFI_TIME TimeStamp; EFI_EVENT RecycleSignal; UINT32 HeaderLength; EFI_IP4_HEADER *Header; UINT32 OptionsLength; VOID *Options; UINT32 DataLength; UINT32 FragmentCount; EFI_IP4_FRAGMENT_DATA FragmentTable[1]; } EFI_IP4_RECEIVE_DATA; typedef struct { EFI_IPv4_ADDRESS SourceAddress; EFI_IPv4_ADDRESS GatewayAddress; UINT8 Protocol; UINT8 TypeOfService; UINT8 TimeToLive; BOOLEAN DoNotFragment; } EFI_IP4_OVERRIDE_DATA; typedef struct { EFI_IPv4_ADDRESS DestinationAddress; EFI_IP4_OVERRIDE_DATA *OverrideData; //OPTIONAL UINT32 OptionsLength; //OPTIONAL VOID *OptionsBuffer; //OPTIONAL UINT32 TotalDataLength; UINT32 FragmentCount; EFI_IP4_FRAGMENT_DATA FragmentTable[1]; } EFI_IP4_TRANSMIT_DATA; typedef struct { /// /// This Event will be signaled after the Status field is updated /// by the EFI IPv4 Protocol driver. The type of Event must be /// EFI_NOTIFY_SIGNAL. The Task Priority Level (TPL) of /// Event must be lower than or equal to TPL_CALLBACK. /// EFI_EVENT Event; /// /// The status that is returned to the caller at the end of the operation /// to indicate whether this operation completed successfully. /// EFI_STATUS Status; union { /// /// When this token is used for receiving, RxData is a pointer to the EFI_IP4_RECEIVE_DATA. /// EFI_IP4_RECEIVE_DATA *RxData; /// /// When this token is used for transmitting, TxData is a pointer to the EFI_IP4_TRANSMIT_DATA. /// EFI_IP4_TRANSMIT_DATA *TxData; } Packet; } EFI_IP4_COMPLETION_TOKEN; /** Gets the current operational settings for this instance of the EFI IPv4 Protocol driver. The GetModeData() function returns the current operational mode data for this driver instance. The data fields in EFI_IP4_MODE_DATA are read only. This function is used optionally to retrieve the operational mode data of underlying networks or drivers. @param This Pointer to the EFI_IP4_PROTOCOL instance. @param Ip4ModeData Pointer to the EFI IPv4 Protocol mode data structure. @param MnpConfigData Pointer to the managed network configuration data structure. @param SnpModeData Pointer to the simple network mode data structure. @retval EFI_SUCCESS The operation completed successfully. @retval EFI_INVALID_PARAMETER This is NULL. @retval EFI_OUT_OF_RESOURCES The required mode data could not be allocated. **/ typedef EFI_STATUS (EFIAPI *EFI_IP4_GET_MODE_DATA)( IN CONST EFI_IP4_PROTOCOL *This, OUT EFI_IP4_MODE_DATA *Ip4ModeData OPTIONAL, OUT EFI_MANAGED_NETWORK_CONFIG_DATA *MnpConfigData OPTIONAL, OUT EFI_SIMPLE_NETWORK_MODE *SnpModeData OPTIONAL ); /** Assigns an IPv4 address and subnet mask to this EFI IPv4 Protocol driver instance. The Configure() function is used to set, change, or reset the operational parameters and filter settings for this EFI IPv4 Protocol instance. Until these parameters have been set, no network traffic can be sent or received by this instance. Once the parameters have been reset (by calling this function with IpConfigData set to NULL), no more traffic can be sent or received until these parameters have been set again. Each EFI IPv4 Protocol instance can be started and stopped independently of each other by enabling or disabling their receive filter settings with the Configure() function. When IpConfigData.UseDefaultAddress is set to FALSE, the new station address will be appended as an alias address into the addresses list in the EFI IPv4 Protocol driver. While set to TRUE, Configure() will trigger the EFI_IP4_CONFIG_PROTOCOL to retrieve the default IPv4 address if it is not available yet. Clients could frequently call GetModeData() to check the status to ensure that the default IPv4 address is ready. If operational parameters are reset or changed, any pending transmit and receive requests will be cancelled. Their completion token status will be set to EFI_ABORTED and their events will be signaled. @param This Pointer to the EFI_IP4_PROTOCOL instance. @param IpConfigData Pointer to the EFI IPv4 Protocol configuration data structure. @retval EFI_SUCCESS The driver instance was successfully opened. @retval EFI_NO_MAPPING When using the default address, configuration (DHCP, BOOTP, RARP, etc.) is not finished yet. @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE: @retval EFI_UNSUPPORTED One or more of the following conditions is TRUE: A configuration protocol (DHCP, BOOTP, RARP, etc.) could not be located when clients choose to use the default IPv4 address. This EFI IPv4 Protocol implementation does not support this requested filter or timeout setting. @retval EFI_OUT_OF_RESOURCES The EFI IPv4 Protocol driver instance data could not be allocated. @retval EFI_ALREADY_STARTED The interface is already open and must be stopped before the IPv4 address or subnet mask can be changed. The interface must also be stopped when switching to/from raw packet mode. @retval EFI_DEVICE_ERROR An unexpected system or network error occurred. The EFI IPv4 Protocol driver instance is not opened. **/ typedef EFI_STATUS (EFIAPI *EFI_IP4_CONFIGURE)( IN EFI_IP4_PROTOCOL *This, IN EFI_IP4_CONFIG_DATA *IpConfigData OPTIONAL ); /** Joins and leaves multicast groups. The Groups() function is used to join and leave multicast group sessions. Joining a group will enable reception of matching multicast packets. Leaving a group will disable the multicast packet reception. If JoinFlag is FALSE and GroupAddress is NULL, all joined groups will be left. @param This Pointer to the EFI_IP4_PROTOCOL instance. @param JoinFlag Set to TRUE to join the multicast group session and FALSE to leave. @param GroupAddress Pointer to the IPv4 multicast address. @retval EFI_SUCCESS The operation completed successfully. @retval EFI_INVALID_PARAMETER One or more of the following is TRUE: - This is NULL. - JoinFlag is TRUE and GroupAddress is NULL. - GroupAddress is not NULL and *GroupAddress is not a multicast IPv4 address. @retval EFI_NOT_STARTED This instance has not been started. @retval EFI_NO_MAPPING When using the default address, configuration (DHCP, BOOTP, RARP, etc.) is not finished yet. @retval EFI_OUT_OF_RESOURCES System resources could not be allocated. @retval EFI_UNSUPPORTED This EFI IPv4 Protocol implementation does not support multicast groups. @retval EFI_ALREADY_STARTED The group address is already in the group table (when JoinFlag is TRUE). @retval EFI_NOT_FOUND The group address is not in the group table (when JoinFlag is FALSE). @retval EFI_DEVICE_ERROR An unexpected system or network error occurred. **/ typedef EFI_STATUS (EFIAPI *EFI_IP4_GROUPS)( IN EFI_IP4_PROTOCOL *This, IN BOOLEAN JoinFlag, IN EFI_IPv4_ADDRESS *GroupAddress OPTIONAL ); /** Adds and deletes routing table entries. The Routes() function adds a route to or deletes a route from the routing table. Routes are determined by comparing the SubnetAddress with the destination IPv4 address arithmetically AND-ed with the SubnetMask. The gateway address must be on the same subnet as the configured station address. The default route is added with SubnetAddress and SubnetMask both set to 0.0.0.0. The default route matches all destination IPv4 addresses that do not match any other routes. A GatewayAddress that is zero is a nonroute. Packets are sent to the destination IP address if it can be found in the ARP cache or on the local subnet. One automatic nonroute entry will be inserted into the routing table for outgoing packets that are addressed to a local subnet (gateway address of 0.0.0.0). Each EFI IPv4 Protocol instance has its own independent routing table. Those EFI IPv4 Protocol instances that use the default IPv4 address will also have copies of the routing table that was provided by the EFI_IP4_CONFIG_PROTOCOL, and these copies will be updated whenever the EIF IPv4 Protocol driver reconfigures its instances. As a result, client modification to the routing table will be lost. @param This Pointer to the EFI_IP4_PROTOCOL instance. @param DeleteRoute Set to TRUE to delete this route from the routing table. Set to FALSE to add this route to the routing table. SubnetAddress and SubnetMask are used as the key to each route entry. @param SubnetAddress The address of the subnet that needs to be routed. @param SubnetMask The subnet mask of SubnetAddress. @param GatewayAddress The unicast gateway IPv4 address for this route. @retval EFI_SUCCESS The operation completed successfully. @retval EFI_NOT_STARTED The driver instance has not been started. @retval EFI_NO_MAPPING When using the default address, configuration (DHCP, BOOTP, RARP, etc.) is not finished yet. @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE: - This is NULL. - SubnetAddress is NULL. - SubnetMask is NULL. - GatewayAddress is NULL. - *SubnetAddress is not a valid subnet address. - *SubnetMask is not a valid subnet mask. - *GatewayAddress is not a valid unicast IPv4 address. @retval EFI_OUT_OF_RESOURCES Could not add the entry to the routing table. @retval EFI_NOT_FOUND This route is not in the routing table (when DeleteRoute is TRUE). @retval EFI_ACCESS_DENIED The route is already defined in the routing table (when DeleteRoute is FALSE). **/ typedef EFI_STATUS (EFIAPI *EFI_IP4_ROUTES)( IN EFI_IP4_PROTOCOL *This, IN BOOLEAN DeleteRoute, IN EFI_IPv4_ADDRESS *SubnetAddress, IN EFI_IPv4_ADDRESS *SubnetMask, IN EFI_IPv4_ADDRESS *GatewayAddress ); /** Places outgoing data packets into the transmit queue. The Transmit() function places a sending request in the transmit queue of this EFI IPv4 Protocol instance. Whenever the packet in the token is sent out or some errors occur, the event in the token will be signaled and the status is updated. @param This Pointer to the EFI_IP4_PROTOCOL instance. @param Token Pointer to the transmit token. @retval EFI_SUCCESS The data has been queued for transmission. @retval EFI_NOT_STARTED This instance has not been started. @retval EFI_NO_MAPPING When using the default address, configuration (DHCP, BOOTP, RARP, etc.) is not finished yet. @retval EFI_INVALID_PARAMETER One or more pameters are invalid. @retval EFI_ACCESS_DENIED The transmit completion token with the same Token.Event was already in the transmit queue. @retval EFI_NOT_READY The completion token could not be queued because the transmit queue is full. @retval EFI_NOT_FOUND Not route is found to destination address. @retval EFI_OUT_OF_RESOURCES Could not queue the transmit data. @retval EFI_BUFFER_TOO_SMALL Token.Packet.TxData.TotalDataLength is too short to transmit. @retval EFI_BAD_BUFFER_SIZE The length of the IPv4 header + option length + total data length is greater than MTU (or greater than the maximum packet size if Token.Packet.TxData.OverrideData. DoNotFragment is TRUE.) **/ typedef EFI_STATUS (EFIAPI *EFI_IP4_TRANSMIT)( IN EFI_IP4_PROTOCOL *This, IN EFI_IP4_COMPLETION_TOKEN *Token ); /** Places a receiving request into the receiving queue. The Receive() function places a completion token into the receive packet queue. This function is always asynchronous. The Token.Event field in the completion token must be filled in by the caller and cannot be NULL. When the receive operation completes, the EFI IPv4 Protocol driver updates the Token.Status and Token.Packet.RxData fields and the Token.Event is signaled. @param This Pointer to the EFI_IP4_PROTOCOL instance. @param Token Pointer to a token that is associated with the receive data descriptor. @retval EFI_SUCCESS The receive completion token was cached. @retval EFI_NOT_STARTED This EFI IPv4 Protocol instance has not been started. @retval EFI_NO_MAPPING When using the default address, configuration (DHCP, BOOTP, RARP, etc.) is not finished yet. @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE: - This is NULL. - Token is NULL. - Token.Event is NULL. @retval EFI_OUT_OF_RESOURCES The receive completion token could not be queued due to a lack of system resources (usually memory). @retval EFI_DEVICE_ERROR An unexpected system or network error occurred. The EFI IPv4 Protocol instance has been reset to startup defaults. EFI_ACCESS_DENIED The receive completion token with the same Token.Event was already in the receive queue. @retval EFI_NOT_READY The receive request could not be queued because the receive queue is full. @retval EFI_ICMP_ERROR An ICMP error packet was received. **/ typedef EFI_STATUS (EFIAPI *EFI_IP4_RECEIVE)( IN EFI_IP4_PROTOCOL *This, IN EFI_IP4_COMPLETION_TOKEN *Token ); /** Abort an asynchronous transmit or receive request. The Cancel() function is used to abort a pending transmit or receive request. If the token is in the transmit or receive request queues, after calling this function, Token->Status will be set to EFI_ABORTED and then Token->Event will be signaled. If the token is not in one of the queues, which usually means the asynchronous operation has completed, this function will not signal the token and EFI_NOT_FOUND is returned. @param This Pointer to the EFI_IP4_PROTOCOL instance. @param Token Pointer to a token that has been issued by EFI_IP4_PROTOCOL.Transmit() or EFI_IP4_PROTOCOL.Receive(). If NULL, all pending tokens are aborted. Type EFI_IP4_COMPLETION_TOKEN is defined in EFI_IP4_PROTOCOL.Transmit(). @retval EFI_SUCCESS The asynchronous I/O request was aborted and Token.->Event was signaled. When Token is NULL, all pending requests were aborted and their events were signaled. @retval EFI_INVALID_PARAMETER This is NULL. @retval EFI_NOT_STARTED This instance has not been started. @retval EFI_NO_MAPPING When using the default address, configuration (DHCP, BOOTP, RARP, etc.) is not finished yet. @retval EFI_NOT_FOUND When Token is not NULL, the asynchronous I/O request was not found in the transmit or receive queue. It has either completed or was not issued by Transmit() and Receive(). **/ typedef EFI_STATUS (EFIAPI *EFI_IP4_CANCEL)( IN EFI_IP4_PROTOCOL *This, IN EFI_IP4_COMPLETION_TOKEN *Token OPTIONAL ); /** Polls for incoming data packets and processes outgoing data packets. The Poll() function polls for incoming data packets and processes outgoing data packets. Network drivers and applications can call the EFI_IP4_PROTOCOL.Poll() function to increase the rate that data packets are moved between the communications device and the transmit and receive queues. In some systems the periodic timer event may not poll the underlying communications device fast enough to transmit and/or receive all data packets without missing incoming packets or dropping outgoing packets. Drivers and applications that are experiencing packet loss should try calling the EFI_IP4_PROTOCOL.Poll() function more often. @param This Pointer to the EFI_IP4_PROTOCOL instance. @retval EFI_SUCCESS Incoming or outgoing data was processed. @retval EFI_NOT_STARTED This EFI IPv4 Protocol instance has not been started. @retval EFI_NO_MAPPING When using the default address, configuration (DHCP, BOOTP, RARP, etc.) is not finished yet. @retval EFI_INVALID_PARAMETER This is NULL. @retval EFI_DEVICE_ERROR An unexpected system or network error occurred. @retval EFI_NOT_READY No incoming or outgoing data is processed. @retval EFI_TIMEOUT Data was dropped out of the transmit and/or receive queue. Consider increasing the polling rate. **/ typedef EFI_STATUS (EFIAPI *EFI_IP4_POLL)( IN EFI_IP4_PROTOCOL *This ); /// /// The EFI IPv4 Protocol implements a simple packet-oriented interface that can be /// used by drivers, daemons, and applications to transmit and receive network packets. /// struct _EFI_IP4_PROTOCOL { EFI_IP4_GET_MODE_DATA GetModeData; EFI_IP4_CONFIGURE Configure; EFI_IP4_GROUPS Groups; EFI_IP4_ROUTES Routes; EFI_IP4_TRANSMIT Transmit; EFI_IP4_RECEIVE Receive; EFI_IP4_CANCEL Cancel; EFI_IP4_POLL Poll; }; extern EFI_GUID gEfiIp4ServiceBindingProtocolGuid; extern EFI_GUID gEfiIp4ProtocolGuid; #endif