/** @file Header file for IDE Bus Driver, containing the helper functions' prototype. Copyright (c) 2006 - 2007 Intel Corporation.
All rights reserved. This program and the accompanying materials are licensed and made available under the terms and conditions of the BSD License which accompanies this distribution. The full text of the license may be found at http://opensource.org/licenses/bsd-license.php THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. @par Revision Reference: 2002-6: Add Atapi6 enhancement, support >120GB hard disk, including Add - IDEBlkIoReadBlocksExt() func definition Add - IDEBlkIoWriteBlocksExt() func definition **/ #ifndef _IDE_H_ #define _IDE_H_ // // Helper functions Prototype // /** read a one-byte data from a IDE port. @param PciIo The PCI IO protocol instance @param Port the IDE Port number return the one-byte data read from IDE port **/ UINT8 IDEReadPortB ( IN EFI_PCI_IO_PROTOCOL *PciIo, IN UINT16 Port ); /** Reads multiple words of data from the IDE data port. Call the IO abstraction once to do the complete read, not one word at a time. @param PciIo Pointer to the EFI_PCI_IO instance @param Port IO port to read @param Count No. of UINT16's to read @param Buffer Pointer to the data buffer for read **/ VOID IDEReadPortWMultiple ( IN EFI_PCI_IO_PROTOCOL *PciIo, IN UINT16 Port, IN UINTN Count, OUT VOID *Buffer ); /** write a 1-byte data to a specific IDE port. @param PciIo PCI IO protocol instance @param Port The IDE port to be writen @param Data The data to write to the port **/ VOID IDEWritePortB ( IN EFI_PCI_IO_PROTOCOL *PciIo, IN UINT16 Port, IN UINT8 Data ); /** write a 1-word data to a specific IDE port. @param PciIo PCI IO protocol instance @param Port The IDE port to be writen @param Data The data to write to the port **/ VOID IDEWritePortW ( IN EFI_PCI_IO_PROTOCOL *PciIo, IN UINT16 Port, IN UINT16 Data ); /** Write multiple words of data to the IDE data port. Call the IO abstraction once to do the complete read, not one word at a time. @param PciIo Pointer to the EFI_PCI_IO instance @param Port IO port to read @param Count No. of UINT16's to read @param Buffer Pointer to the data buffer for read **/ VOID IDEWritePortWMultiple ( IN EFI_PCI_IO_PROTOCOL *PciIo, IN UINT16 Port, IN UINTN Count, IN VOID *Buffer ); /** Get IDE IO port registers' base addresses by mode. In 'Compatibility' mode, use fixed addresses. In Native-PCI mode, get base addresses from BARs in the PCI IDE controller's Configuration Space. The steps to get IDE IO port registers' base addresses for each channel as follows: 1. Examine the Programming Interface byte of the Class Code fields in PCI IDE controller's Configuration Space to determine the operating mode. 2. a) In 'Compatibility' mode, use fixed addresses shown in the Table 1 below.
  ___________________________________________
  |           | Command Block | Control Block |
  |  Channel  |   Registers   |   Registers   |
  |___________|_______________|_______________|
  |  Primary  |  1F0h - 1F7h  |  3F6h - 3F7h  |
  |___________|_______________|_______________|
  | Secondary |  170h - 177h  |  376h - 377h  |
  |___________|_______________|_______________|

  Table 1. Compatibility resource mappings
  
b) In Native-PCI mode, IDE registers are mapped into IO space using the BARs in IDE controller's PCI Configuration Space, shown in the Table 2 below.
  ___________________________________________________
  |           |   Command Block   |   Control Block   |
  |  Channel  |     Registers     |     Registers     |
  |___________|___________________|___________________|
  |  Primary  | BAR at offset 0x10| BAR at offset 0x14|
  |___________|___________________|___________________|
  | Secondary | BAR at offset 0x18| BAR at offset 0x1C|
  |___________|___________________|___________________|

  Table 2. BARs for Register Mapping
  
@note Refer to Intel ICH4 datasheet, Control Block Offset: 03F4h for primary, 0374h for secondary. So 2 bytes extra offset should be added to the base addresses read from BARs. For more details, please refer to PCI IDE Controller Specification and Intel ICH4 Datasheet. @param PciIo Pointer to the EFI_PCI_IO_PROTOCOL instance @param IdeRegsBaseAddr Pointer to IDE_REGISTERS_BASE_ADDR to receive IDE IO port registers' base addresses @retval EFI_UNSUPPORTED return this value when the BARs is not IO type @retval EFI_SUCCESS Get the Base address successfully @retval other read the pci configureation data error **/ EFI_STATUS GetIdeRegistersBaseAddr ( IN EFI_PCI_IO_PROTOCOL *PciIo, OUT IDE_REGISTERS_BASE_ADDR *IdeRegsBaseAddr ); /** This function is used to requery IDE resources. The IDE controller will probably switch between native and legacy modes during the EFI->CSM->OS transfer. We do this everytime before an BlkIo operation to ensure its succeess. @param IdeDev The BLK_IO private data which specifies the IDE device @retval EFI_INVALID_PARAMETER return this value when the channel is invalid @retval EFI_SUCCESS reassign the IDE IO resource successfully @retval other get the IDE current base address effor **/ EFI_STATUS ReassignIdeResources ( IN IDE_BLK_IO_DEV *IdeDev ); /** Detect if there is disk attached to this port. @param IdeDev The BLK_IO private data which specifies the IDE device. @retval EFI_NOT_FOUND The device or channel is not found @retval EFI_SUCCESS The device is found **/ EFI_STATUS DiscoverIdeDevice ( IN IDE_BLK_IO_DEV *IdeDev ); /** This interface is used to initialize all state data related to the detection of one channel. **/ VOID InitializeIDEChannelData ( VOID ); /** This function is used to poll for the DRQ bit clear in the Status Register. DRQ is cleared when the device is finished transferring data. So this function is called after data transfer is finished. @param IdeDev pointer pointing to IDE_BLK_IO_DEV data structure, used to record all the information of the IDE device. @param TimeoutInMilliSeconds used to designate the timeout for the DRQ clear. @retval EFI_SUCCESS DRQ bit clear within the time out. @retval EFI_TIMEOUT DRQ bit not clear within the time out. @note Read Status Register will clear interrupt status. **/ EFI_STATUS DRQClear ( IN IDE_BLK_IO_DEV *IdeDev, IN UINTN TimeoutInMilliSeconds ); /** This function is used to poll for the DRQ bit clear in the Alternate Status Register. DRQ is cleared when the device is finished transferring data. So this function is called after data transfer is finished. @param IdeDev pointer pointing to IDE_BLK_IO_DEV data structure, used to record all the information of the IDE device. @param TimeoutInMilliSeconds used to designate the timeout for the DRQ clear. @retval EFI_SUCCESS DRQ bit clear within the time out. @retval EFI_TIMEOUT DRQ bit not clear within the time out. @note Read Alternate Status Register will not clear interrupt status. **/ EFI_STATUS DRQClear2 ( IN IDE_BLK_IO_DEV *IdeDev, IN UINTN TimeoutInMilliSeconds ); /** This function is used to poll for the DRQ bit set in the Status Register. DRQ is set when the device is ready to transfer data. So this function is called after the command is sent to the device and before required data is transferred. @param IdeDev pointer pointing to IDE_BLK_IO_DEV data structure,used to record all the information of the IDE device. @param TimeoutInMilliSeconds used to designate the timeout for the DRQ ready. @retval EFI_SUCCESS DRQ bit set within the time out. @retval EFI_TIMEOUT DRQ bit not set within the time out. @retval EFI_ABORTED DRQ bit not set caused by the command abort. @note Read Status Register will clear interrupt status. **/ EFI_STATUS DRQReady ( IN IDE_BLK_IO_DEV *IdeDev, IN UINTN TimeoutInMilliSeconds ); /** This function is used to poll for the DRQ bit set in the Alternate Status Register. DRQ is set when the device is ready to transfer data. So this function is called after the command is sent to the device and before required data is transferred. @param IdeDev pointer pointing to IDE_BLK_IO_DEV data structure, used to record all the information of the IDE device. @param TimeoutInMilliSeconds used to designate the timeout for the DRQ ready. @retval EFI_SUCCESS DRQ bit set within the time out. @retval EFI_TIMEOUT DRQ bit not set within the time out. @retval EFI_ABORTED DRQ bit not set caused by the command abort. @note Read Alternate Status Register will not clear interrupt status. **/ EFI_STATUS DRQReady2 ( IN IDE_BLK_IO_DEV *IdeDev, IN UINTN TimeoutInMilliSeconds ); /** This function is used to poll for the BSY bit clear in the Status Register. BSY is clear when the device is not busy. Every command must be sent after device is not busy. @param IdeDev pointer pointing to IDE_BLK_IO_DEV data structure, used to record all the information of the IDE device. @param TimeoutInMilliSeconds used to designate the timeout for the DRQ ready. @retval EFI_SUCCESS BSY bit clear within the time out. @retval EFI_TIMEOUT BSY bit not clear within the time out. @note Read Status Register will clear interrupt status. **/ EFI_STATUS WaitForBSYClear ( IN IDE_BLK_IO_DEV *IdeDev, IN UINTN TimeoutInMilliSeconds ); /** This function is used to poll for the BSY bit clear in the Alternate Status Register. BSY is clear when the device is not busy. Every command must be sent after device is not busy. @param IdeDev pointer pointing to IDE_BLK_IO_DEV data structure, used to record all the information of the IDE device. @param TimeoutInMilliSeconds used to designate the timeout for the DRQ ready. @retval EFI_SUCCESS BSY bit clear within the time out. @retval EFI_TIMEOUT BSY bit not clear within the time out. @note Read Alternate Status Register will not clear interrupt status. **/ EFI_STATUS WaitForBSYClear2 ( IN IDE_BLK_IO_DEV *IdeDev, IN UINTN TimeoutInMilliSeconds ); /** This function is used to poll for the DRDY bit set in the Status Register. DRDY bit is set when the device is ready to accept command. Most ATA commands must be sent after DRDY set except the ATAPI Packet Command. @param IdeDev pointer pointing to IDE_BLK_IO_DEV data structure, used to record all the information of the IDE device. @param DelayInMilliSeconds used to designate the timeout for the DRQ ready. @retval EFI_SUCCESS DRDY bit set within the time out. @retval EFI_TIMEOUT DRDY bit not set within the time out. @note Read Status Register will clear interrupt status. **/ EFI_STATUS DRDYReady ( IN IDE_BLK_IO_DEV *IdeDev, IN UINTN DelayInMilliSeconds ); /** This function is used to poll for the DRDY bit set in the Alternate Status Register. DRDY bit is set when the device is ready to accept command. Most ATA commands must be sent after DRDY set except the ATAPI Packet Command. @param IdeDev pointer pointing to IDE_BLK_IO_DEV data structure, used to record all the information of the IDE device. @param DelayInMilliSeconds used to designate the timeout for the DRQ ready. @retval EFI_SUCCESS DRDY bit set within the time out. @retval EFI_TIMEOUT DRDY bit not set within the time out. @note Read Alternate Status Register will clear interrupt status. **/ EFI_STATUS DRDYReady2 ( IN IDE_BLK_IO_DEV *IdeDev, IN UINTN DelayInMilliSeconds ); // // ATA device functions' prototype // /** Sends out an ATA Identify Command to the specified device. This function is called by DiscoverIdeDevice() during its device identification. It sends out the ATA Identify Command to the specified device. Only ATA device responses to this command. If the command succeeds, it returns the Identify data structure which contains information about the device. This function extracts the information it needs to fill the IDE_BLK_IO_DEV data structure, including device type, media block size, media capacity, and etc. @param IdeDev pointer pointing to IDE_BLK_IO_DEV data structure,used to record all the information of the IDE device. @retval EFI_SUCCESS Identify ATA device successfully. @retval EFI_DEVICE_ERROR ATA Identify Device Command failed or device is not ATA device. @note parameter IdeDev will be updated in this function. **/ EFI_STATUS ATAIdentify ( IN IDE_BLK_IO_DEV *IdeDev ); /** This function is called by ATAIdentify() or ATAPIIdentify() to print device's module name. @param IdeDev pointer pointing to IDE_BLK_IO_DEV data structure, used to record all the information of the IDE device. **/ VOID PrintAtaModuleName ( IN IDE_BLK_IO_DEV *IdeDev ); /** This function is used to send out ATA commands conforms to the PIO Data In Protocol. @param IdeDev pointer pointing to IDE_BLK_IO_DEV data structure, used to record all the information of the IDE device. @param Buffer buffer contained data transferred from device to host. @param ByteCount data size in byte unit of the buffer. @param AtaCommand value of the Command Register @param Head value of the Head/Device Register @param SectorCount value of the Sector Count Register @param SectorNumber value of the Sector Number Register @param CylinderLsb value of the low byte of the Cylinder Register @param CylinderMsb value of the high byte of the Cylinder Register @retval EFI_SUCCESS send out the ATA command and device send required data successfully. @retval EFI_DEVICE_ERROR command sent failed. **/ EFI_STATUS AtaPioDataIn ( IN IDE_BLK_IO_DEV *IdeDev, IN VOID *Buffer, IN UINT32 ByteCount, IN UINT8 AtaCommand, IN UINT8 Head, IN UINT8 SectorCount, IN UINT8 SectorNumber, IN UINT8 CylinderLsb, IN UINT8 CylinderMsb ); /** This function is used to send out ATA commands conforms to the PIO Data Out Protocol. @param IdeDev pointer pointing to IDE_BLK_IO_DEV data structure, used to record all the information of the IDE device. @param *Buffer buffer contained data transferred from host to device. @param ByteCount data size in byte unit of the buffer. @param AtaCommand value of the Command Register @param Head value of the Head/Device Register @param SectorCount value of the Sector Count Register @param SectorNumber value of the Sector Number Register @param CylinderLsb value of the low byte of the Cylinder Register @param CylinderMsb value of the high byte of the Cylinder Register @retval EFI_SUCCESS send out the ATA command and device received required data successfully. @retval EFI_DEVICE_ERROR command sent failed. **/ EFI_STATUS AtaPioDataOut ( IN IDE_BLK_IO_DEV *IdeDev, IN VOID *Buffer, IN UINT32 ByteCount, IN UINT8 AtaCommand, IN UINT8 Head, IN UINT8 SectorCount, IN UINT8 SectorNumber, IN UINT8 CylinderLsb, IN UINT8 CylinderMsb ); /** This function is used to analyze the Status Register and print out some debug information and if there is ERR bit set in the Status Register, the Error Register's value is also be parsed and print out. @param IdeDev pointer pointing to IDE_BLK_IO_DEV data structure, used to record all the information of the IDE device. @retval EFI_SUCCESS No err information in the Status Register. @retval EFI_DEVICE_ERROR Any err information in the Status Register. **/ EFI_STATUS CheckErrorStatus ( IN IDE_BLK_IO_DEV *IdeDev ); /** This function is used to implement the Soft Reset on the specified device. But, the ATA Soft Reset mechanism is so strong a reset method that it will force resetting on both devices connected to the same cable. It is called by IdeBlkIoReset(), a interface function of Block I/O protocol. This function can also be used by the ATAPI device to perform reset when ATAPI Reset command is failed. @param IdeDev pointer pointing to IDE_BLK_IO_DEV data structure, used to record all the information of the IDE device. @retval EFI_SUCCESS Soft reset completes successfully. @retval EFI_DEVICE_ERROR Any step during the reset process is failed. @note The registers initial values after ATA soft reset are different to the ATA device and ATAPI device. **/ EFI_STATUS AtaSoftReset ( IN IDE_BLK_IO_DEV *IdeDev ); /** This function is the ATA implementation for ReadBlocks in the Block I/O Protocol interface. @param IdeBlkIoDevice Indicates the calling context. @param MediaId The media id that the read request is for. @param Lba The starting logical block address to read from on the device. @param BufferSize The size of the Buffer in bytes. This must be a multiple of the intrinsic block size of the device. @param Buffer A pointer to the destination buffer for the data. The caller is responsible for either having implicit or explicit ownership of the memory that data is read into. @retval EFI_SUCCESS Read Blocks successfully. @retval EFI_DEVICE_ERROR Read Blocks failed. @retval EFI_NO_MEDIA There is no media in the device. @retval EFI_MEDIA_CHANGE The MediaId is not for the current media. @retval EFI_BAD_BUFFER_SIZE The BufferSize parameter is not a multiple of the intrinsic block size of the device. @retval EFI_INVALID_PARAMETER The read request contains LBAs that are not valid, or the data buffer is not valid. @note If Read Block error because of device error, this function will call AtaSoftReset() function to reset device. **/ EFI_STATUS AtaBlkIoReadBlocks ( IN IDE_BLK_IO_DEV *IdeBlkIoDevice, IN UINT32 MediaId, IN EFI_LBA Lba, IN UINTN BufferSize, OUT VOID *Buffer ); /** This function is the ATA implementation for WriteBlocks in the Block I/O Protocol interface. @param IdeBlkIoDevice Indicates the calling context. @param MediaId The media id that the write request is for. @param Lba The starting logical block address to write onto the device. @param BufferSize The size of the Buffer in bytes. This must be a multiple of the intrinsic block size of the device. @param Buffer A pointer to the source buffer for the data.The caller is responsible for either having implicit or explicit ownership of the memory that data is written from. @retval EFI_SUCCESS Write Blocks successfully. @retval EFI_DEVICE_ERROR Write Blocks failed. @retval EFI_NO_MEDIA There is no media in the device. @retval EFI_MEDIA_CHANGE The MediaId is not for the current media. @retval EFI_BAD_BUFFER_SIZE The BufferSize parameter is not a multiple of the intrinsic block size of the device. @retval EFI_INVALID_PARAMETER The write request contains LBAs that are not valid, or the data buffer is not valid. @note If Write Block error because of device error, this function will call AtaSoftReset() function to reset device. **/ EFI_STATUS AtaBlkIoWriteBlocks ( IN IDE_BLK_IO_DEV *IdeBlkIoDevice, IN UINT32 MediaId, IN EFI_LBA Lba, IN UINTN BufferSize, OUT VOID *Buffer ); /** This function is called by DiscoverIdeDevice() during its device identification. Its main purpose is to get enough information for the device media to fill in the Media data structure of the Block I/O Protocol interface. There are 5 steps to reach such objective: 1. Sends out the ATAPI Identify Command to the specified device. Only ATAPI device responses to this command. If the command succeeds, it returns the Identify data structure which filled with information about the device. Since the ATAPI device contains removable media, the only meaningful information is the device module name. 2. Sends out ATAPI Inquiry Packet Command to the specified device. This command will return inquiry data of the device, which contains the device type information. 3. Allocate sense data space for future use. We don't detect the media presence here to improvement boot performance, especially when CD media is present. The media detection will be performed just before each BLK_IO read/write @param IdeDev pointer pointing to IDE_BLK_IO_DEV data structure, used to record all the information of the IDE device. @retval EFI_SUCCESS Identify ATAPI device successfully. @retval EFI_DEVICE_ERROR ATAPI Identify Device Command failed or device type is not supported by this IDE driver. @retval EFI_OUT_OF_RESOURCES Allocate memory for sense data failed @note Parameter "IdeDev" will be updated in this function. **/ EFI_STATUS ATAPIIdentify ( IN IDE_BLK_IO_DEV *IdeDev ); /** This function is used to implement the Soft Reset on the specified ATAPI device. Different from the AtaSoftReset(), here reset is a ATA Soft Reset Command special for ATAPI device, and it only take effects on the specified ATAPI device, not on the whole IDE bus. Since the ATAPI soft reset is needed when device is in exceptional condition (such as BSY bit is always set ), I think the Soft Reset command should be sent without waiting for the BSY clear and DRDY set. This function is called by IdeBlkIoReset(), a interface function of Block I/O protocol. @param IdeDev pointer pointing to IDE_BLK_IO_DEV data structure, used to record all the information of the IDE device. @retval EFI_SUCCESS Soft reset completes successfully. @retval EFI_DEVICE_ERROR Any step during the reset process is failed. **/ EFI_STATUS AtapiSoftReset ( IN IDE_BLK_IO_DEV *IdeDev ); /** This function is the ATAPI implementation for ReadBlocks in the Block I/O Protocol interface. @param IdeBlkIoDevice Indicates the calling context. @param MediaId The media id that the read request is for. @param Lba The starting logical block address to read from on the device. @param BufferSize The size of the Buffer in bytes. This must be a multiple of the intrinsic block size of the device. @param Buffer A pointer to the destination buffer for the data. The caller is responsible for either having implicit or explicit ownership of the memory that data is read into. @retval EFI_SUCCESS Read Blocks successfully. @retval EFI_DEVICE_ERROR Read Blocks failed. @retval EFI_NO_MEDIA There is no media in the device. @retval EFI_MEDIA_CHANGED The MediaId is not for the current media. @retval EFI_BAD_BUFFER_SIZE The BufferSize parameter is not a multiple of the intrinsic block size of the device. @retval EFI_INVALID_PARAMETER The read request contains LBAs that are not valid, or the data buffer is not valid. **/ EFI_STATUS AtapiBlkIoReadBlocks ( IN IDE_BLK_IO_DEV *IdeBlkIoDevice, IN UINT32 MediaId, IN EFI_LBA Lba, IN UINTN BufferSize, OUT VOID *Buffer ); /** This function is the ATAPI implementation for WriteBlocks in the Block I/O Protocol interface. @param IdeBlkIoDevice Indicates the calling context. @param MediaId The media id that the write request is for. @param Lba The starting logical block address to write onto the device. @param BufferSize The size of the Buffer in bytes. This must be a multiple of the intrinsic block size of the device. @param Buffer A pointer to the source buffer for the data. The caller is responsible for either having implicit or explicit ownership of the memory that data is written from. @retval EFI_SUCCESS Write Blocks successfully. @retval EFI_DEVICE_ERROR Write Blocks failed. @retval EFI_NO_MEDIA There is no media in the device. @retval EFI_MEDIA_CHANGE The MediaId is not for the current media. @retval EFI_BAD_BUFFER_SIZE The BufferSize parameter is not a multiple of the intrinsic block size of the device. @retval EFI_INVALID_PARAMETER The write request contains LBAs that are not valid, or the data buffer is not valid. @retval EFI_WRITE_PROTECTED The write protected is enabled or the media does not support write **/ EFI_STATUS AtapiBlkIoWriteBlocks ( IN IDE_BLK_IO_DEV *IdeBlkIoDevice, IN UINT32 MediaId, IN EFI_LBA Lba, IN UINTN BufferSize, OUT VOID *Buffer ); /** Release resources of an IDE device before stopping it. @param IdeBlkIoDevice Standard IDE device private data structure **/ VOID ReleaseIdeResources ( IN IDE_BLK_IO_DEV *IdeBlkIoDevice ); /** Set the calculated Best transfer mode to a detected device @param IdeDev Standard IDE device private data structure @param TransferMode The device transfer mode to be set @return Set transfer mode Command execute status. **/ EFI_STATUS SetDeviceTransferMode ( IN IDE_BLK_IO_DEV *IdeDev, IN ATA_TRANSFER_MODE *TransferMode ); /** Send ATA command into device with NON_DATA protocol. @param IdeDev Standard IDE device private data structure @param AtaCommand The ATA command to be sent @param Device The value in Device register @param Feature The value in Feature register @param SectorCount The value in SectorCount register @param LbaLow The value in LBA_LOW register @param LbaMiddle The value in LBA_MIDDLE register @param LbaHigh The value in LBA_HIGH register @retval EFI_SUCCESS Reading succeed @retval EFI_ABORTED Command failed @retval EFI_DEVICE_ERROR Device status error. **/ EFI_STATUS AtaNonDataCommandIn ( IN IDE_BLK_IO_DEV *IdeDev, IN UINT8 AtaCommand, IN UINT8 Device, IN UINT8 Feature, IN UINT8 SectorCount, IN UINT8 LbaLow, IN UINT8 LbaMiddle, IN UINT8 LbaHigh ); /** Send ATA Ext command into device with NON_DATA protocol. @param IdeDev Standard IDE device private data structure @param AtaCommand The ATA command to be sent @param Device The value in Device register @param Feature The value in Feature register @param SectorCount The value in SectorCount register @param LbaAddress The Lba address in 48-bit mode @retval EFI_SUCCESS Reading succeed @retval EFI_ABORTED Command failed @retval EFI_DEVICE_ERROR Device status error. **/ EFI_STATUS AtaNonDataCommandInExt ( IN IDE_BLK_IO_DEV *IdeDev, IN UINT8 AtaCommand, IN UINT8 Device, IN UINT16 Feature, IN UINT16 SectorCount, IN EFI_LBA LbaAddress ); /** Enable Long Physical Sector Feature for ATA device. @param IdeDev The IDE device data @retval EFI_SUCCESS The ATA device supports Long Physical Sector feature and corresponding fields in BlockIo structure is updated. @retval EFI_UNSUPPORTED The device is not ATA device or Long Physical Sector feature is not supported. **/ EFI_STATUS AtaEnableLongPhysicalSector ( IN IDE_BLK_IO_DEV *IdeDev ); /** Set drive parameters for devices not support PACKETS command. @param IdeDev Standard IDE device private data structure @param DriveParameters The device parameters to be set into the disk @return SetParameters Command execute status. **/ EFI_STATUS SetDriveParameters ( IN IDE_BLK_IO_DEV *IdeDev, IN ATA_DRIVE_PARMS *DriveParameters ); /** Enable Interrupt on IDE controller. @param IdeDev Standard IDE device private data structure @retval EFI_SUCCESS Enable Interrupt successfully **/ EFI_STATUS EnableInterrupt ( IN IDE_BLK_IO_DEV *IdeDev ); #endif