/** @file
Copyright (c) 2006 - 2015, Intel Corporation. All rights reserved.
This program and the accompanying materials
are licensed and made available under the terms and conditions
of the BSD License which accompanies this distribution. The
full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#ifndef _LEGACY_BIOS_INTERFACE_
#define _LEGACY_BIOS_INTERFACE_
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
//
// BUGBUG: This entry maybe changed to PCD in future and wait for
// redesign of BDS library
//
#define MAX_BBS_ENTRIES 0x100
//
// Thunk Status Codes
// (These apply only to errors with the thunk and not to the code that was
// thunked to.)
//
#define THUNK_OK 0x00
#define THUNK_ERR_A20_UNSUP 0x01
#define THUNK_ERR_A20_FAILED 0x02
//
// Vector base definitions
//
//
// 8259 Hardware definitions
//
#define LEGACY_MODE_BASE_VECTOR_MASTER 0x08
#define LEGACY_MODE_BASE_VECTOR_SLAVE 0x70
//
// The original PC used INT8-F for master PIC. Since these mapped over
// processor exceptions TIANO moved the master PIC to INT68-6F.
//
// The vector base for slave PIC is set as 0x70 for PC-AT compatibility.
//
#define PROTECTED_MODE_BASE_VECTOR_MASTER 0x68
#define PROTECTED_MODE_BASE_VECTOR_SLAVE 0x70
//
// When we call CSM16 functions, some CSM16 use es:[offset + 0xabcd] to get data passed from CSM32,
// offset + 0xabcd could overflow which exceeds 0xFFFF which is invalid in real mode.
// So this will keep offset as small as possible to avoid offset overflow in real mode.
//
#define NORMALIZE_EFI_SEGMENT(_Adr) (UINT16) (((UINTN) (_Adr)) >> 4)
#define NORMALIZE_EFI_OFFSET(_Adr) (UINT16) (((UINT16) ((UINTN) (_Adr))) & 0xf)
//
// Trace defines
//
//
#define LEGACY_BDA_TRACE 0x000
#define LEGACY_BIOS_TRACE 0x040
#define LEGACY_BOOT_TRACE 0x080
#define LEGACY_CMOS_TRACE 0x0C0
#define LEGACY_IDE_TRACE 0x100
#define LEGACY_MP_TRACE 0x140
#define LEGACY_PCI_TRACE 0x180
#define LEGACY_SIO_TRACE 0x1C0
#define LEGACY_PCI_TRACE_000 LEGACY_PCI_TRACE + 0x00
#define LEGACY_PCI_TRACE_001 LEGACY_PCI_TRACE + 0x01
#define LEGACY_PCI_TRACE_002 LEGACY_PCI_TRACE + 0x02
#define LEGACY_PCI_TRACE_003 LEGACY_PCI_TRACE + 0x03
#define LEGACY_PCI_TRACE_004 LEGACY_PCI_TRACE + 0x04
#define LEGACY_PCI_TRACE_005 LEGACY_PCI_TRACE + 0x05
#define LEGACY_PCI_TRACE_006 LEGACY_PCI_TRACE + 0x06
#define LEGACY_PCI_TRACE_007 LEGACY_PCI_TRACE + 0x07
#define LEGACY_PCI_TRACE_008 LEGACY_PCI_TRACE + 0x08
#define LEGACY_PCI_TRACE_009 LEGACY_PCI_TRACE + 0x09
#define LEGACY_PCI_TRACE_00A LEGACY_PCI_TRACE + 0x0A
#define LEGACY_PCI_TRACE_00B LEGACY_PCI_TRACE + 0x0B
#define LEGACY_PCI_TRACE_00C LEGACY_PCI_TRACE + 0x0C
#define LEGACY_PCI_TRACE_00D LEGACY_PCI_TRACE + 0x0D
#define LEGACY_PCI_TRACE_00E LEGACY_PCI_TRACE + 0x0E
#define LEGACY_PCI_TRACE_00F LEGACY_PCI_TRACE + 0x0F
#define BDA_VIDEO_MODE 0x49
#define IDE_PI_REGISTER_PNE BIT0
#define IDE_PI_REGISTER_SNE BIT2
typedef struct {
UINTN PciSegment;
UINTN PciBus;
UINTN PciDevice;
UINTN PciFunction;
UINT32 ShadowAddress;
UINT32 ShadowedSize;
UINT8 DiskStart;
UINT8 DiskEnd;
} ROM_INSTANCE_ENTRY;
//
// Values for RealModeGdt
//
#if defined (MDE_CPU_IA32)
#define NUM_REAL_GDT_ENTRIES 3
#define CONVENTIONAL_MEMORY_TOP 0xA0000 // 640 KB
#define INITIAL_VALUE_BELOW_1K 0x0
#elif defined (MDE_CPU_X64)
#define NUM_REAL_GDT_ENTRIES 8
#define CONVENTIONAL_MEMORY_TOP 0xA0000 // 640 KB
#define INITIAL_VALUE_BELOW_1K 0x0
#elif defined (MDE_CPU_IPF)
#define NUM_REAL_GDT_ENTRIES 3
#define CONVENTIONAL_MEMORY_TOP 0x80000 // 512 KB
#define INITIAL_VALUE_BELOW_1K 0xff
#endif
#pragma pack(1)
//
// Define what a processor GDT looks like
//
typedef struct {
UINT32 LimitLo : 16;
UINT32 BaseLo : 16;
UINT32 BaseMid : 8;
UINT32 Type : 4;
UINT32 System : 1;
UINT32 Dpl : 2;
UINT32 Present : 1;
UINT32 LimitHi : 4;
UINT32 Software : 1;
UINT32 Reserved : 1;
UINT32 DefaultSize : 1;
UINT32 Granularity : 1;
UINT32 BaseHi : 8;
} GDT32;
typedef struct {
UINT16 LimitLow;
UINT16 BaseLow;
UINT8 BaseMid;
UINT8 Attribute;
UINT8 LimitHi;
UINT8 BaseHi;
} GDT64;
//
// Define what a processor descriptor looks like
// This data structure must be kept in sync with ASM STRUCT in Thunk.inc
//
typedef struct {
UINT16 Limit;
UINT64 Base;
} DESCRIPTOR64;
typedef struct {
UINT16 Limit;
UINT32 Base;
} DESCRIPTOR32;
//
// Low stub lay out
//
#define LOW_STACK_SIZE (8 * 1024) // 8k?
#define EFI_MAX_E820_ENTRY 100
#define FIRST_INSTANCE 1
#define NOT_FIRST_INSTANCE 0
#if defined (MDE_CPU_IA32)
typedef struct {
//
// Space for the code
// The address of Code is also the beginning of the relocated Thunk code
//
CHAR8 Code[4096]; // ?
//
// The address of the Reverse Thunk code
// Note that this member CONTAINS the address of the relocated reverse thunk
// code unlike the member variable 'Code', which IS the address of the Thunk
// code.
//
UINT32 LowReverseThunkStart;
//
// Data for the code (cs releative)
//
DESCRIPTOR32 GdtDesc; // Protected mode GDT
DESCRIPTOR32 IdtDesc; // Protected mode IDT
UINT32 FlatSs;
UINT32 FlatEsp;
UINT32 LowCodeSelector; // Low code selector in GDT
UINT32 LowDataSelector; // Low data selector in GDT
UINT32 LowStack;
DESCRIPTOR32 RealModeIdtDesc;
//
// real-mode GDT (temporary GDT with two real mode segment descriptors)
//
GDT32 RealModeGdt[NUM_REAL_GDT_ENTRIES];
DESCRIPTOR32 RealModeGdtDesc;
//
// Members specifically for the reverse thunk
// The RevReal* members are used to store the current state of real mode
// before performing the reverse thunk. The RevFlat* members must be set
// before calling the reverse thunk assembly code.
//
UINT16 RevRealDs;
UINT16 RevRealSs;
UINT32 RevRealEsp;
DESCRIPTOR32 RevRealIdtDesc;
UINT16 RevFlatDataSelector; // Flat data selector in GDT
UINT32 RevFlatStack;
//
// A low memory stack
//
CHAR8 Stack[LOW_STACK_SIZE];
//
// Stack for flat mode after reverse thunk
// @bug - This may no longer be necessary if the reverse thunk interface
// is changed to have the flat stack in a different location.
//
CHAR8 RevThunkStack[LOW_STACK_SIZE];
//
// Legacy16 Init memory map info
//
EFI_TO_COMPATIBILITY16_INIT_TABLE EfiToLegacy16InitTable;
EFI_TO_COMPATIBILITY16_BOOT_TABLE EfiToLegacy16BootTable;
CHAR8 InterruptRedirectionCode[32];
EFI_LEGACY_INSTALL_PCI_HANDLER PciHandler;
EFI_DISPATCH_OPROM_TABLE DispatchOpromTable;
BBS_TABLE BbsTable[MAX_BBS_ENTRIES];
} LOW_MEMORY_THUNK;
#elif defined (MDE_CPU_X64)
typedef struct {
//
// Space for the code
// The address of Code is also the beginning of the relocated Thunk code
//
CHAR8 Code[4096]; // ?
//
// Data for the code (cs releative)
//
DESCRIPTOR64 X64GdtDesc; // Protected mode GDT
DESCRIPTOR64 X64IdtDesc; // Protected mode IDT
UINTN X64Ss;
UINTN X64Esp;
UINTN RealStack;
DESCRIPTOR32 RealModeIdtDesc;
DESCRIPTOR32 RealModeGdtDesc;
//
// real-mode GDT (temporary GDT with two real mode segment descriptors)
//
GDT64 RealModeGdt[NUM_REAL_GDT_ENTRIES];
UINT64 PageMapLevel4;
//
// A low memory stack
//
CHAR8 Stack[LOW_STACK_SIZE];
//
// Legacy16 Init memory map info
//
EFI_TO_COMPATIBILITY16_INIT_TABLE EfiToLegacy16InitTable;
EFI_TO_COMPATIBILITY16_BOOT_TABLE EfiToLegacy16BootTable;
CHAR8 InterruptRedirectionCode[32];
EFI_LEGACY_INSTALL_PCI_HANDLER PciHandler;
EFI_DISPATCH_OPROM_TABLE DispatchOpromTable;
BBS_TABLE BbsTable[MAX_BBS_ENTRIES];
} LOW_MEMORY_THUNK;
#elif defined (MDE_CPU_IPF)
typedef struct {
//
// Space for the code
// The address of Code is also the beginning of the relocated Thunk code
//
CHAR8 Code[4096]; // ?
//
// The address of the Reverse Thunk code
// Note that this member CONTAINS the address of the relocated reverse thunk
// code unlike the member variable 'Code', which IS the address of the Thunk
// code.
//
UINT32 LowReverseThunkStart;
//
// Data for the code (cs releative)
//
DESCRIPTOR32 GdtDesc; // Protected mode GDT
DESCRIPTOR32 IdtDesc; // Protected mode IDT
UINT32 FlatSs;
UINT32 FlatEsp;
UINT32 LowCodeSelector; // Low code selector in GDT
UINT32 LowDataSelector; // Low data selector in GDT
UINT32 LowStack;
DESCRIPTOR32 RealModeIdtDesc;
//
// real-mode GDT (temporary GDT with two real mode segment descriptors)
//
GDT32 RealModeGdt[NUM_REAL_GDT_ENTRIES];
DESCRIPTOR32 RealModeGdtDesc;
//
// Members specifically for the reverse thunk
// The RevReal* members are used to store the current state of real mode
// before performing the reverse thunk. The RevFlat* members must be set
// before calling the reverse thunk assembly code.
//
UINT16 RevRealDs;
UINT16 RevRealSs;
UINT32 RevRealEsp;
DESCRIPTOR32 RevRealIdtDesc;
UINT16 RevFlatDataSelector; // Flat data selector in GDT
UINT32 RevFlatStack;
//
// A low memory stack
//
CHAR8 Stack[LOW_STACK_SIZE];
//
// Stack for flat mode after reverse thunk
// @bug - This may no longer be necessary if the reverse thunk interface
// is changed to have the flat stack in a different location.
//
CHAR8 RevThunkStack[LOW_STACK_SIZE];
//
// Legacy16 Init memory map info
//
EFI_TO_COMPATIBILITY16_INIT_TABLE EfiToLegacy16InitTable;
EFI_TO_COMPATIBILITY16_BOOT_TABLE EfiToLegacy16BootTable;
CHAR8 InterruptRedirectionCode[32];
EFI_LEGACY_INSTALL_PCI_HANDLER PciHandler;
EFI_DISPATCH_OPROM_TABLE DispatchOpromTable;
BBS_TABLE BbsTable[MAX_BBS_ENTRIES];
} LOW_MEMORY_THUNK;
#endif
//
// PnP Expansion Header
//
typedef struct {
UINT32 PnpSignature;
UINT8 Revision;
UINT8 Length;
UINT16 NextHeader;
UINT8 Reserved1;
UINT8 Checksum;
UINT32 DeviceId;
UINT16 MfgPointer;
UINT16 ProductNamePointer;
UINT8 Class;
UINT8 SubClass;
UINT8 Interface;
UINT8 DeviceIndicators;
UINT16 Bcv;
UINT16 DisconnectVector;
UINT16 Bev;
UINT16 Reserved2;
UINT16 StaticResourceVector;
} LEGACY_PNP_EXPANSION_HEADER;
typedef struct {
UINT8 PciSegment;
UINT8 PciBus;
UINT8 PciDevice;
UINT8 PciFunction;
UINT16 Vid;
UINT16 Did;
UINT16 SysSid;
UINT16 SVid;
UINT8 Class;
UINT8 SubClass;
UINT8 Interface;
UINT8 Reserved;
UINTN RomStart;
UINTN ManufacturerString;
UINTN ProductNameString;
} LEGACY_ROM_AND_BBS_TABLE;
//
// Structure how EFI has mapped a devices HDD drive numbers.
// Boot to EFI aware OS or shell requires this mapping when
// 16-bit CSM assigns drive numbers.
// This mapping is ignored booting to a legacy OS.
//
typedef struct {
UINT8 PciSegment;
UINT8 PciBus;
UINT8 PciDevice;
UINT8 PciFunction;
UINT8 StartDriveNumber;
UINT8 EndDriveNumber;
} LEGACY_EFI_HDD_TABLE;
//
// This data is passed to Leacy16Boot
//
typedef enum {
EfiAcpiAddressRangeMemory = 1,
EfiAcpiAddressRangeReserved = 2,
EfiAcpiAddressRangeACPI = 3,
EfiAcpiAddressRangeNVS = 4,
EfiAddressRangePersistentMemory = 7
} EFI_ACPI_MEMORY_TYPE;
typedef struct {
UINT64 BaseAddr;
UINT64 Length;
EFI_ACPI_MEMORY_TYPE Type;
} EFI_E820_ENTRY64;
typedef struct {
UINT32 BassAddrLow;
UINT32 BaseAddrHigh;
UINT32 LengthLow;
UINT32 LengthHigh;
EFI_ACPI_MEMORY_TYPE Type;
} EFI_E820_ENTRY;
#pragma pack()
extern BBS_TABLE *mBbsTable;
extern EFI_GENERIC_MEMORY_TEST_PROTOCOL *gGenMemoryTest;
#define PORT_70 0x70
#define PORT_71 0x71
#define CMOS_0A 0x0a ///< Status register A
#define CMOS_0D 0x0d ///< Status register D
#define CMOS_0E 0x0e ///< Diagnostic Status
#define CMOS_0F 0x0f ///< Shutdown status
#define CMOS_10 0x10 ///< Floppy type
#define CMOS_12 0x12 ///< IDE type
#define CMOS_14 0x14 ///< Same as BDA 40:10
#define CMOS_15 0x15 ///< Low byte of base memory in 1k increments
#define CMOS_16 0x16 ///< High byte of base memory in 1k increments
#define CMOS_17 0x17 ///< Low byte of 1MB+ memory in 1k increments - max 15 MB
#define CMOS_18 0x18 ///< High byte of 1MB+ memory in 1k increments - max 15 MB
#define CMOS_19 0x19 ///< C: extended drive type
#define CMOS_1A 0x1a ///< D: extended drive type
#define CMOS_2E 0x2e ///< Most significient byte of standard checksum
#define CMOS_2F 0x2f ///< Least significient byte of standard checksum
#define CMOS_30 0x30 ///< CMOS 0x17
#define CMOS_31 0x31 ///< CMOS 0x18
#define CMOS_32 0x32 ///< Century byte
//
// 8254 Timer registers
//
#define TIMER0_COUNT_PORT 0x40
#define TIMER1_COUNT_PORT 0x41
#define TIMER2_COUNT_PORT 0x42
#define TIMER_CONTROL_PORT 0x43
//
// Timer 0, Read/Write LSB then MSB, Square wave output, binary count use.
//
#define TIMER0_CONTROL_WORD 0x36
#define LEGACY_BIOS_INSTANCE_SIGNATURE SIGNATURE_32 ('L', 'B', 'I', 'T')
typedef struct {
UINTN Signature;
EFI_HANDLE Handle;
EFI_LEGACY_BIOS_PROTOCOL LegacyBios;
EFI_HANDLE ImageHandle;
//
// CPU Architectural Protocol
//
EFI_CPU_ARCH_PROTOCOL *Cpu;
//
// Timer Architectural Protocol
//
EFI_TIMER_ARCH_PROTOCOL *Timer;
BOOLEAN TimerUses8254;
//
// Protocol to Lock and Unlock 0xc0000 - 0xfffff
//
EFI_LEGACY_REGION2_PROTOCOL *LegacyRegion;
EFI_LEGACY_BIOS_PLATFORM_PROTOCOL *LegacyBiosPlatform;
//
// Interrupt control for thunk and PCI IRQ
//
EFI_LEGACY_8259_PROTOCOL *Legacy8259;
//
// PCI Interrupt PIRQ control
//
EFI_LEGACY_INTERRUPT_PROTOCOL *LegacyInterrupt;
//
// Generic Memory Test
//
EFI_GENERIC_MEMORY_TEST_PROTOCOL *GenericMemoryTest;
//
// TRUE if PCI Interupt Line registers have been programmed.
//
BOOLEAN PciInterruptLine;
//
// Code space below 1MB needed by thunker to transition to real mode.
// Contains stack and real mode code fragments
//
LOW_MEMORY_THUNK *IntThunk;
//
// Starting shadow address of the Legacy BIOS
//
UINT32 BiosStart;
UINT32 LegacyBiosImageSize;
//
// Start of variables used by CsmItp.mac ITP macro file and/os LegacyBios
//
UINT8 Dump[4];
//
// $EFI Legacy16 code entry info in memory < 1 MB;
//
EFI_COMPATIBILITY16_TABLE *Legacy16Table;
VOID *Legacy16InitPtr;
VOID *Legacy16BootPtr;
VOID *InternalIrqRoutingTable;
UINT32 NumberIrqRoutingEntries;
VOID *BbsTablePtr;
VOID *HddTablePtr;
UINT32 NumberHddControllers;
//
// Cached copy of Legacy16 entry point
//
UINT16 Legacy16CallSegment;
UINT16 Legacy16CallOffset;
//
// Returned from $EFI and passed in to OPROMS
//
UINT16 PnPInstallationCheckSegment;
UINT16 PnPInstallationCheckOffset;
//
// E820 table
//
EFI_E820_ENTRY E820Table[EFI_MAX_E820_ENTRY];
UINT32 NumberE820Entries;
//
// True if legacy VGA INT 10h handler installed
//
BOOLEAN VgaInstalled;
//
// Number of IDE drives
//
UINT8 IdeDriveCount;
//
// Current Free Option ROM space. An option ROM must NOT go past
// BiosStart.
//
UINT32 OptionRom;
//
// Save Legacy16 unexpected interrupt vector. Reprogram INT 68-6F from
// EFI values to legacy value just before boot.
//
UINT32 BiosUnexpectedInt;
UINT32 ThunkSavedInt[8];
UINT16 ThunkSeg;
LEGACY_EFI_HDD_TABLE *LegacyEfiHddTable;
UINT16 LegacyEfiHddTableIndex;
UINT8 DiskEnd;
UINT8 Disk4075;
UINT16 TraceIndex;
UINT16 Trace[0x200];
//
// Indicate that whether GenericLegacyBoot is entered or not
//
BOOLEAN LegacyBootEntered;
//
// CSM16 PCI Interface Version
//
UINT16 Csm16PciInterfaceVersion;
} LEGACY_BIOS_INSTANCE;
#pragma pack(1)
/*
40:00-01 Com1
40:02-03 Com2
40:04-05 Com3
40:06-07 Com4
40:08-09 Lpt1
40:0A-0B Lpt2
40:0C-0D Lpt3
40:0E-0E Ebda segment
40:10-11 MachineConfig
40:12 Bda12 - skip
40:13-14 MemSize below 1MB
40:15-16 Bda15_16 - skip
40:17 Keyboard Shift status
40:18-19 Bda18_19 - skip
40:1A-1B Key buffer head
40:1C-1D Key buffer tail
40:1E-3D Bda1E_3D- key buffer -skip
40:3E-3F FloppyData 3E = Calibration status 3F = Motor status
40:40 FloppyTimeout
40:41-74 Bda41_74 - skip
40:75 Number of HDD drives
40:76-77 Bda76_77 - skip
40:78-79 78 = Lpt1 timeout, 79 = Lpt2 timeout
40:7A-7B 7A = Lpt3 timeout, 7B = Lpt4 timeout
40:7C-7D 7C = Com1 timeout, 7D = Com2 timeout
40:7E-7F 7E = Com3 timeout, 7F = Com4 timeout
40:80-81 Pointer to start of key buffer
40:82-83 Pointer to end of key buffer
40:84-87 Bda84_87 - skip
40:88 HDD Data Xmit rate
40:89-8f skip
40:90 Floppy data rate
40:91-95 skip
40:96 Keyboard Status
40:97 LED Status
40:98-101 skip
*/
typedef struct {
UINT16 Com1;
UINT16 Com2;
UINT16 Com3;
UINT16 Com4;
UINT16 Lpt1;
UINT16 Lpt2;
UINT16 Lpt3;
UINT16 Ebda;
UINT16 MachineConfig;
UINT8 Bda12;
UINT16 MemSize;
UINT8 Bda15_16[0x02];
UINT8 ShiftStatus;
UINT8 Bda18_19[0x02];
UINT16 KeyHead;
UINT16 KeyTail;
UINT16 Bda1E_3D[0x10];
UINT16 FloppyData;
UINT8 FloppyTimeout;
UINT8 Bda41_74[0x34];
UINT8 NumberOfDrives;
UINT8 Bda76_77[0x02];
UINT16 Lpt1_2Timeout;
UINT16 Lpt3_4Timeout;
UINT16 Com1_2Timeout;
UINT16 Com3_4Timeout;
UINT16 KeyStart;
UINT16 KeyEnd;
UINT8 Bda84_87[0x4];
UINT8 DataXmit;
UINT8 Bda89_8F[0x07];
UINT8 FloppyXRate;
UINT8 Bda91_95[0x05];
UINT8 KeyboardStatus;
UINT8 LedStatus;
} BDA_STRUC;
#pragma pack()
#define LEGACY_BIOS_INSTANCE_FROM_THIS(this) CR (this, LEGACY_BIOS_INSTANCE, LegacyBios, LEGACY_BIOS_INSTANCE_SIGNATURE)
/**
Thunk to 16-bit real mode and execute a software interrupt with a vector
of BiosInt. Regs will contain the 16-bit register context on entry and
exit.
@param This Protocol instance pointer.
@param BiosInt Processor interrupt vector to invoke
@param Regs Register contexted passed into (and returned) from thunk to
16-bit mode
@retval FALSE Thunk completed, and there were no BIOS errors in the target code.
See Regs for status.
@retval TRUE There was a BIOS erro in the target code.
**/
BOOLEAN
EFIAPI
LegacyBiosInt86 (
IN EFI_LEGACY_BIOS_PROTOCOL *This,
IN UINT8 BiosInt,
IN EFI_IA32_REGISTER_SET *Regs
);
/**
Thunk to 16-bit real mode and call Segment:Offset. Regs will contain the
16-bit register context on entry and exit. Arguments can be passed on
the Stack argument
@param This Protocol instance pointer.
@param Segment Segemnt of 16-bit mode call
@param Offset Offset of 16-bit mdoe call
@param Regs Register contexted passed into (and returned) from
thunk to 16-bit mode
@param Stack Caller allocated stack used to pass arguments
@param StackSize Size of Stack in bytes
@retval FALSE Thunk completed, and there were no BIOS errors in
the target code. See Regs for status.
@retval TRUE There was a BIOS erro in the target code.
**/
BOOLEAN
EFIAPI
LegacyBiosFarCall86 (
IN EFI_LEGACY_BIOS_PROTOCOL *This,
IN UINT16 Segment,
IN UINT16 Offset,
IN EFI_IA32_REGISTER_SET *Regs,
IN VOID *Stack,
IN UINTN StackSize
);
/**
Test to see if a legacy PCI ROM exists for this device. Optionally return
the Legacy ROM instance for this PCI device.
@param This Protocol instance pointer.
@param PciHandle The PCI PC-AT OPROM from this devices ROM BAR will
be loaded
@param RomImage Return the legacy PCI ROM for this device
@param RomSize Size of ROM Image
@param Flags Indicates if ROM found and if PC-AT.
@retval EFI_SUCCESS Legacy Option ROM availible for this device
@retval EFI_UNSUPPORTED Legacy Option ROM not supported.
**/
EFI_STATUS
EFIAPI
LegacyBiosCheckPciRom (
IN EFI_LEGACY_BIOS_PROTOCOL *This,
IN EFI_HANDLE PciHandle,
OUT VOID **RomImage, OPTIONAL
OUT UINTN *RomSize, OPTIONAL
OUT UINTN *Flags
);
/**
Assign drive number to legacy HDD drives prior to booting an EFI
aware OS so the OS can access drives without an EFI driver.
Note: BBS compliant drives ARE NOT available until this call by
either shell or EFI.
@param This Protocol instance pointer.
@param BbsCount Number of BBS_TABLE structures
@param BbsTable List BBS entries
@retval EFI_SUCCESS Drive numbers assigned
**/
EFI_STATUS
EFIAPI
LegacyBiosPrepareToBootEfi (
IN EFI_LEGACY_BIOS_PROTOCOL *This,
OUT UINT16 *BbsCount,
OUT BBS_TABLE **BbsTable
);
/**
To boot from an unconventional device like parties and/or execute
HDD diagnostics.
@param This Protocol instance pointer.
@param Attributes How to interpret the other input parameters
@param BbsEntry The 0-based index into the BbsTable for the parent
device.
@param BeerData Pointer to the 128 bytes of ram BEER data.
@param ServiceAreaData Pointer to the 64 bytes of raw Service Area data.
The caller must provide a pointer to the specific
Service Area and not the start all Service Areas.
EFI_INVALID_PARAMETER if error. Does NOT return if no error.
**/
EFI_STATUS
EFIAPI
LegacyBiosBootUnconventionalDevice (
IN EFI_LEGACY_BIOS_PROTOCOL *This,
IN UDC_ATTRIBUTES Attributes,
IN UINTN BbsEntry,
IN VOID *BeerData,
IN VOID *ServiceAreaData
);
/**
Load a legacy PC-AT OPROM on the PciHandle device. Return information
about how many disks were added by the OPROM and the shadow address and
size. DiskStart & DiskEnd are INT 13h drive letters. Thus 0x80 is C:
@param This Protocol instance pointer.
@param PciHandle The PCI PC-AT OPROM from this devices ROM BAR will
be loaded. This value is NULL if RomImage is
non-NULL. This is the normal case.
@param RomImage A PCI PC-AT ROM image. This argument is non-NULL
if there is no hardware associated with the ROM
and thus no PciHandle, otherwise is must be NULL.
Example is PXE base code.
@param Flags Indicates if ROM found and if PC-AT.
@param DiskStart Disk number of first device hooked by the ROM. If
DiskStart is the same as DiskEnd no disked were
hooked.
@param DiskEnd Disk number of the last device hooked by the ROM.
@param RomShadowAddress Shadow address of PC-AT ROM
@param RomShadowedSize Size of RomShadowAddress in bytes
@retval EFI_SUCCESS Legacy ROM loaded for this device
@retval EFI_INVALID_PARAMETER PciHandle not found
@retval EFI_UNSUPPORTED There is no PCI ROM in the ROM BAR or no onboard
ROM
**/
EFI_STATUS
EFIAPI
LegacyBiosInstallPciRom (
IN EFI_LEGACY_BIOS_PROTOCOL * This,
IN EFI_HANDLE PciHandle,
IN VOID **RomImage,
OUT UINTN *Flags,
OUT UINT8 *DiskStart, OPTIONAL
OUT UINT8 *DiskEnd, OPTIONAL
OUT VOID **RomShadowAddress, OPTIONAL
OUT UINT32 *RomShadowedSize OPTIONAL
);
/**
Fill in the standard BDA for Keyboard LEDs
@param This Protocol instance pointer.
@param Leds Current LED status
@retval EFI_SUCCESS It should always work.
**/
EFI_STATUS
EFIAPI
LegacyBiosUpdateKeyboardLedStatus (
IN EFI_LEGACY_BIOS_PROTOCOL *This,
IN UINT8 Leds
);
/**
Get all BBS info
@param This Protocol instance pointer.
@param HddCount Number of HDD_INFO structures
@param HddInfo Onboard IDE controller information
@param BbsCount Number of BBS_TABLE structures
@param BbsTable List BBS entries
@retval EFI_SUCCESS Tables returned
@retval EFI_NOT_FOUND resource not found
@retval EFI_DEVICE_ERROR can not get BBS table
**/
EFI_STATUS
EFIAPI
LegacyBiosGetBbsInfo (
IN EFI_LEGACY_BIOS_PROTOCOL *This,
OUT UINT16 *HddCount,
OUT HDD_INFO **HddInfo,
OUT UINT16 *BbsCount,
OUT BBS_TABLE **BbsTable
);
/**
Shadow all legacy16 OPROMs that haven't been shadowed.
Warning: Use this with caution. This routine disconnects all EFI
drivers. If used externally then caller must re-connect EFI
drivers.
@param This Protocol instance pointer.
@retval EFI_SUCCESS OPROMs shadowed
**/
EFI_STATUS
EFIAPI
LegacyBiosShadowAllLegacyOproms (
IN EFI_LEGACY_BIOS_PROTOCOL *This
);
/**
Attempt to legacy boot the BootOption. If the EFI contexted has been
compromised this function will not return.
@param This Protocol instance pointer.
@param BbsDevicePath EFI Device Path from BootXXXX variable.
@param LoadOptionsSize Size of LoadOption in size.
@param LoadOptions LoadOption from BootXXXX variable
@retval EFI_SUCCESS Removable media not present
**/
EFI_STATUS
EFIAPI
LegacyBiosLegacyBoot (
IN EFI_LEGACY_BIOS_PROTOCOL *This,
IN BBS_BBS_DEVICE_PATH *BbsDevicePath,
IN UINT32 LoadOptionsSize,
IN VOID *LoadOptions
);
/**
Allocate memory < 1 MB and copy the thunker code into low memory. Se up
all the descriptors.
@param Private Private context for Legacy BIOS
@retval EFI_SUCCESS Should only pass.
**/
EFI_STATUS
LegacyBiosInitializeThunk (
IN LEGACY_BIOS_INSTANCE *Private
);
/**
Fill in the standard BDA and EBDA stuff before Legacy16 load
@param Private Legacy BIOS Instance data
@retval EFI_SUCCESS It should always work.
**/
EFI_STATUS
LegacyBiosInitBda (
IN LEGACY_BIOS_INSTANCE *Private
);
/**
Collect IDE Inquiry data from the IDE disks
@param Private Legacy BIOS Instance data
@param HddInfo Hdd Information
@param Flag Reconnect IdeController or not
@retval EFI_SUCCESS It should always work.
**/
EFI_STATUS
LegacyBiosBuildIdeData (
IN LEGACY_BIOS_INSTANCE *Private,
IN HDD_INFO **HddInfo,
IN UINT16 Flag
);
/**
Enable ide controller. This gets disabled when LegacyBoot.c is about
to run the Option ROMs.
@param Private Legacy BIOS Instance data
**/
VOID
EnableIdeController (
IN LEGACY_BIOS_INSTANCE *Private
);
/**
If the IDE channel is in compatibility (legacy) mode, remove all
PCI I/O BAR addresses from the controller.
@param IdeController The handle of target IDE controller
**/
VOID
InitLegacyIdeController (
IN EFI_HANDLE IdeController
);
/**
Program the interrupt routing register in all the PCI devices. On a PC AT system
this register contains the 8259 IRQ vector that matches it's PCI interrupt.
@param Private Legacy BIOS Instance data
@retval EFI_SUCCESS Succeed.
@retval EFI_ALREADY_STARTED All PCI devices have been processed.
**/
EFI_STATUS
PciProgramAllInterruptLineRegisters (
IN LEGACY_BIOS_INSTANCE *Private
);
/**
Collect EFI Info about legacy devices.
@param Private Legacy BIOS Instance data
@retval EFI_SUCCESS It should always work.
**/
EFI_STATUS
LegacyBiosBuildSioData (
IN LEGACY_BIOS_INSTANCE *Private
);
/**
Shadow all the PCI legacy ROMs. Use data from the Legacy BIOS Protocol
to chose the order. Skip any devices that have already have legacy
BIOS run.
@param Private Protocol instance pointer.
@retval EFI_SUCCESS Succeed.
@retval EFI_UNSUPPORTED Cannot get VGA device handle.
**/
EFI_STATUS
PciShadowRoms (
IN LEGACY_BIOS_INSTANCE *Private
);
/**
Fill in the standard BDA and EBDA stuff prior to legacy Boot
@param Private Legacy BIOS Instance data
@retval EFI_SUCCESS It should always work.
**/
EFI_STATUS
LegacyBiosCompleteBdaBeforeBoot (
IN LEGACY_BIOS_INSTANCE *Private
);
/**
Fill in the standard CMOS stuff before Legacy16 load
@param Private Legacy BIOS Instance data
@retval EFI_SUCCESS It should always work.
**/
EFI_STATUS
LegacyBiosInitCmos (
IN LEGACY_BIOS_INSTANCE *Private
);
/**
Fill in the standard CMOS stuff prior to legacy Boot
@param Private Legacy BIOS Instance data
@retval EFI_SUCCESS It should always work.
**/
EFI_STATUS
LegacyBiosCompleteStandardCmosBeforeBoot (
IN LEGACY_BIOS_INSTANCE *Private
);
/**
Contains the code that is copied into low memory (below 640K).
This code reflects interrupts 0x68-0x6f to interrupts 0x08-0x0f.
This template must be copied into low memory, and the IDT entries
0x68-0x6F must be point to the low memory copy of this code. Each
entry is 4 bytes long, so IDT entries 0x68-0x6F can be easily
computed.
**/
VOID
InterruptRedirectionTemplate (
VOID
);
/**
Build the E820 table.
@param Private Legacy BIOS Instance data
@param Size Size of E820 Table
@retval EFI_SUCCESS It should always work.
**/
EFI_STATUS
LegacyBiosBuildE820 (
IN LEGACY_BIOS_INSTANCE *Private,
OUT UINTN *Size
);
/**
This function is to put all AP in halt state.
@param Private Legacy BIOS Instance data
**/
VOID
ShutdownAPs (
IN LEGACY_BIOS_INSTANCE *Private
);
/**
Worker function for LegacyBiosGetFlatDescs, retrieving content of
specific registers.
@param IntThunk Pointer to IntThunk of Legacy BIOS context.
**/
VOID
GetRegisters (
LOW_MEMORY_THUNK *IntThunk
);
/**
Routine for calling real thunk code.
@param RealCode The address of thunk code.
@param BiosInt The Bios interrupt vector number.
@param CallAddress The address of 16-bit mode call.
@return Status returned by real thunk code
**/
UINTN
CallRealThunkCode (
UINT8 *RealCode,
UINT8 BiosInt,
UINT32 CallAddress
);
/**
Routine for generating soft interrupt.
@param Vector The interrupt vector number.
**/
VOID
GenerateSoftInit (
UINT8 Vector
);
/**
Do an AllocatePages () of type AllocateMaxAddress for EfiBootServicesCode
memory.
@param AllocateType Allocated Legacy Memory Type
@param StartPageAddress Start address of range
@param Pages Number of pages to allocate
@param Result Result of allocation
@retval EFI_SUCCESS Legacy16 code loaded
@retval Other No protocol installed, unload driver.
**/
EFI_STATUS
AllocateLegacyMemory (
IN EFI_ALLOCATE_TYPE AllocateType,
IN EFI_PHYSICAL_ADDRESS StartPageAddress,
IN UINTN Pages,
OUT EFI_PHYSICAL_ADDRESS *Result
);
/**
Get a region from the LegacyBios for Tiano usage. Can only be invoked once.
@param This Protocol instance pointer.
@param LegacyMemorySize Size of required region
@param Region Region to use. 00 = Either 0xE0000 or 0xF0000
block Bit0 = 1 0xF0000 block Bit1 = 1 0xE0000
block
@param Alignment Address alignment. Bit mapped. First non-zero
bit from right is alignment.
@param LegacyMemoryAddress Region Assigned
@retval EFI_SUCCESS Region assigned
@retval EFI_ACCESS_DENIED Procedure previously invoked
@retval Other Region not assigned
**/
EFI_STATUS
EFIAPI
LegacyBiosGetLegacyRegion (
IN EFI_LEGACY_BIOS_PROTOCOL *This,
IN UINTN LegacyMemorySize,
IN UINTN Region,
IN UINTN Alignment,
OUT VOID **LegacyMemoryAddress
);
/**
Get a region from the LegacyBios for Tiano usage. Can only be invoked once.
@param This Protocol instance pointer.
@param LegacyMemorySize Size of data to copy
@param LegacyMemoryAddress Legacy Region destination address Note: must
be in region assigned by
LegacyBiosGetLegacyRegion
@param LegacyMemorySourceAddress Source of data
@retval EFI_SUCCESS Region assigned
@retval EFI_ACCESS_DENIED Destination outside assigned region
**/
EFI_STATUS
EFIAPI
LegacyBiosCopyLegacyRegion (
IN EFI_LEGACY_BIOS_PROTOCOL *This,
IN UINTN LegacyMemorySize,
IN VOID *LegacyMemoryAddress,
IN VOID *LegacyMemorySourceAddress
);
/**
Find Legacy16 BIOS image in the FLASH device and shadow it into memory. Find
the $EFI table in the shadow area. Thunk into the Legacy16 code after it had
been shadowed.
@param Private Legacy BIOS context data
@retval EFI_SUCCESS Legacy16 code loaded
@retval Other No protocol installed, unload driver.
**/
EFI_STATUS
ShadowAndStartLegacy16 (
IN LEGACY_BIOS_INSTANCE *Private
);
/**
Checks the state of the floppy and if media is inserted.
This routine checks the state of the floppy and if media is inserted.
There are 3 cases:
No floppy present - Set BBS entry to ignore
Floppy present & no media - Set BBS entry to lowest priority. We cannot
set it to ignore since 16-bit CSM will
indicate no floppy and thus drive A: is
unusable. CSM-16 will not try floppy since
lowest priority and thus not incur boot
time penality.
Floppy present & media - Set BBS entry to some priority.
@return State of floppy media
**/
UINT8
HasMediaInFloppy (
VOID
);
/**
Identify drive data must be updated to actual parameters before boot.
This requires updating the checksum, if it exists.
@param IdentifyDriveData ATA Identify Data
@param Checksum checksum of the ATA Identify Data
@retval EFI_SUCCESS checksum calculated
@retval EFI_SECURITY_VIOLATION IdentifyData invalid
**/
EFI_STATUS
CalculateIdentifyDriveChecksum (
IN UINT8 *IdentifyDriveData,
OUT UINT8 *Checksum
);
/**
Identify drive data must be updated to actual parameters before boot.
@param IdentifyDriveData ATA Identify Data
**/
VOID
UpdateIdentifyDriveData (
IN UINT8 *IdentifyDriveData
);
/**
Complete build of BBS TABLE.
@param Private Legacy BIOS Instance data
@param BbsTable BBS Table passed to 16-bit code
@retval EFI_SUCCESS Removable media not present
**/
EFI_STATUS
LegacyBiosBuildBbs (
IN LEGACY_BIOS_INSTANCE *Private,
IN BBS_TABLE *BbsTable
);
/**
Read CMOS register through index/data port.
@param[in] Index The index of the CMOS register to read.
@return The data value from the CMOS register specified by Index.
**/
UINT8
LegacyReadStandardCmos (
IN UINT8 Index
);
/**
Write CMOS register through index/data port.
@param[in] Index The index of the CMOS register to write.
@param[in] Value The value of CMOS register to write.
@return The value written to the CMOS register specified by Index.
**/
UINT8
LegacyWriteStandardCmos (
IN UINT8 Index,
IN UINT8 Value
);
/**
Calculate the new standard CMOS checksum and write it.
@param Private Legacy BIOS Instance data
@retval EFI_SUCCESS Calculate 16-bit checksum successfully
**/
EFI_STATUS
LegacyCalculateWriteStandardCmosChecksum (
VOID
);
/**
Test to see if a legacy PCI ROM exists for this device. Optionally return
the Legacy ROM instance for this PCI device.
@param[in] This Protocol instance pointer.
@param[in] PciHandle The PCI PC-AT OPROM from this devices ROM BAR will be loaded
@param[out] RomImage Return the legacy PCI ROM for this device
@param[out] RomSize Size of ROM Image
@param[out] RuntimeImageLength Runtime size of ROM Image
@param[out] Flags Indicates if ROM found and if PC-AT.
@param[out] OpromRevision Revision of the PCI Rom
@param[out] ConfigUtilityCodeHeaderPointer of Configuration Utility Code Header
@return EFI_SUCCESS Legacy Option ROM availible for this device
@return EFI_ALREADY_STARTED This device is already managed by its Oprom
@return EFI_UNSUPPORTED Legacy Option ROM not supported.
**/
EFI_STATUS
LegacyBiosCheckPciRomEx (
IN EFI_LEGACY_BIOS_PROTOCOL *This,
IN EFI_HANDLE PciHandle,
OUT VOID **RomImage, OPTIONAL
OUT UINTN *RomSize, OPTIONAL
OUT UINTN *RuntimeImageLength, OPTIONAL
OUT UINTN *Flags, OPTIONAL
OUT UINT8 *OpromRevision, OPTIONAL
OUT VOID **ConfigUtilityCodeHeader OPTIONAL
);
/**
Relocate this image under 4G memory for IPF.
@param ImageHandle Handle of driver image.
@param SystemTable Pointer to system table.
@retval EFI_SUCCESS Image successfully relocated.
@retval EFI_ABORTED Failed to relocate image.
**/
EFI_STATUS
RelocateImageUnder4GIfNeeded (
IN EFI_HANDLE ImageHandle,
IN EFI_SYSTEM_TABLE *SystemTable
);
/**
Thunk to 16-bit real mode and call Segment:Offset. Regs will contain the
16-bit register context on entry and exit. Arguments can be passed on
the Stack argument
@param This Protocol instance pointer.
@param Segment Segemnt of 16-bit mode call
@param Offset Offset of 16-bit mdoe call
@param Regs Register contexted passed into (and returned) from thunk to
16-bit mode
@param Stack Caller allocated stack used to pass arguments
@param StackSize Size of Stack in bytes
@retval FALSE Thunk completed, and there were no BIOS errors in the target code.
See Regs for status.
@retval TRUE There was a BIOS erro in the target code.
**/
BOOLEAN
EFIAPI
InternalLegacyBiosFarCall (
IN EFI_LEGACY_BIOS_PROTOCOL *This,
IN UINT16 Segment,
IN UINT16 Offset,
IN EFI_IA32_REGISTER_SET *Regs,
IN VOID *Stack,
IN UINTN StackSize
);
/**
Load a legacy PC-AT OpROM for VGA controller.
@param Private Driver private data.
@retval EFI_SUCCESS Legacy ROM successfully installed for this device.
@retval EFI_DEVICE_ERROR No VGA device handle found, or native EFI video
driver cannot be successfully disconnected, or VGA
thunk driver cannot be successfully connected.
**/
EFI_STATUS
LegacyBiosInstallVgaRom (
IN LEGACY_BIOS_INSTANCE *Private
);
#endif