/** @file
Return the initial module search path.
This file is based upon the Modules/getpath.c file from the Python distribution
but has had everything not exactly necessary for operation on EDK II stripped
out.
Search in specified locations for the associated Python libraries.
For the EDK II, UEFI, implementation of Python, PREFIX and EXEC_PREFIX
are set as follows:
PREFIX = /Efi/StdLib
EXEC_PREFIX = PREFIX
The volume is assumed to be the current volume when Python was started.
Py_GetPath returns module_search_path.
Py_GetPrefix returns PREFIX
Py_GetExec_Prefix returns PREFIX
Py_GetProgramFullPath returns the full path to the python executable.
These are built dynamically so that the proper volume name can be prefixed
to the paths.
The following final paths (for Python 2.7.10) are assumed:
/Efi/Tools/Python.efi The Python executable.
/Efi/StdLib/lib/python27.10 The version dependent Python modules.
/Efi/StdLib/lib/python.27 The version independent Python modules.
/Efi/StdLib/lib/python27.10/lib-dynload Dynamically loadable Python extension modules.
Copyright (c) 2015, Daryl McDaniel. All rights reserved.
Copyright (c) 2011 - 2012, Intel Corporation. All rights reserved.
This program and the accompanying materials are licensed and made available under
the terms and conditions of the BSD License that accompanies this distribution.
The full text of the license may be found at
http://opensource.org/licenses/bsd-license.
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include
#include
#include
#define SIFY_I( x ) #x
#define SIFY( y ) SIFY_I( y )
/* VERSION must be at least two characters long. */
#ifndef VERSION
#define VERSION SIFY(PY_MAJOR_VERSION) SIFY(PY_MINOR_VERSION)
#endif
#ifndef VPATH
#define VPATH "."
#endif
/* Search path entry delimiter */
#ifdef DELIM
#define sDELIM ";"
#endif
#ifndef PREFIX
#define PREFIX "/Efi/StdLib"
#endif
#ifndef EXEC_PREFIX
#define EXEC_PREFIX PREFIX
#endif
#ifndef LIBPYTHON
#define LIBPYTHON "lib/python" VERSION "." SIFY(PY_MICRO_VERSION)
#endif
#ifndef PYTHONPATH
#define PYTHONPATH LIBPYTHON
#endif
#ifndef LANDMARK
#define LANDMARK "os.py"
#endif
#ifdef __cplusplus
extern "C" {
#endif
static char prefix[MAXPATHLEN+1];
static char exec_prefix[MAXPATHLEN+1];
static char progpath[MAXPATHLEN+1];
static char *module_search_path = NULL;
static char lib_python[] = LIBPYTHON;
static char volume_name[32] = { 0 };
/** Determine if "ch" is a separator character.
@param[in] ch The character to test.
@retval TRUE ch is a separator character.
@retval FALSE ch is NOT a separator character.
**/
static int
is_sep(char ch)
{
return ch == SEP || ch == ALTSEP;
}
/** Reduce a path by its last element.
The last element (everything to the right of the last separator character)
in the path, dir, is removed from the path. Parameter dir is modified in place.
@param[in,out] dir Pointer to the path to modify.
**/
static void
reduce(char *dir)
{
size_t i = strlen(dir);
while (i > 0 && !is_sep(dir[i]))
--i;
dir[i] = '\0';
}
/** Determine if a path is absolute, or not.
An absolute path consists of a volume name, "VOL:", followed by a rooted path,
"/path/elements". If both of these components are present, the path is absolute.
Let P be a pointer to the path to test.
Let A be a pointer to the first ':' in P.
Let B be a pointer to the first '/' or '\\' in P.
If A and B are not NULL
If (A-P+1) == (B-P) then the path is absolute.
Otherwise, the path is NOT absolute.
@param[in] path The path to test.
@retval -1 Path is absolute but lacking volume name.
@retval 0 Path is NOT absolute.
@retval 1 Path is absolute.
*/
static int
is_absolute(char *path)
{
char *A;
char *B;
A = strchr(path, ':');
B = strpbrk(path, "/\\");
if(B != NULL) {
if(A == NULL) {
if(B == path) {
return -1;
}
}
else {
if(((A - path) + 1) == (B - path)) {
return 1;
}
}
}
return 0;
}
/** Add a path component, by appending stuff to buffer.
buffer must have at least MAXPATHLEN + 1 bytes allocated, and contain a
NUL-terminated string with no more than MAXPATHLEN characters (not counting
the trailing NUL). It's a fatal error if it contains a string longer than
that (callers must be careful!). If these requirements are met, it's
guaranteed that buffer will still be a NUL-terminated string with no more
than MAXPATHLEN characters at exit. If stuff is too long, only as much of
stuff as fits will be appended.
@param[in,out] buffer The path to be extended.
@param[in] stuff The stuff to join onto the path.
*/
static void
joinpath(char *buffer, char *stuff)
{
size_t n, k;
k = 0;
if (is_absolute(stuff) == 1) {
n = 0;
}
else {
n = strlen(buffer);
if(n == 0) {
strncpy(buffer, volume_name, MAXPATHLEN);
n = strlen(buffer);
}
/* We must not use an else clause here because we want to test n again.
volume_name may have been empty.
*/
if (n > 0 && n < MAXPATHLEN) {
if(!is_sep(buffer[n-1])) {
buffer[n++] = SEP;
}
if(is_sep(stuff[0])) ++stuff;
}
}
if (n > MAXPATHLEN)
Py_FatalError("buffer overflow in getpath.c's joinpath()");
k = strlen(stuff);
if (n + k > MAXPATHLEN)
k = MAXPATHLEN - n;
strncpy(buffer+n, stuff, k);
buffer[n+k] = '\0';
}
/** Is filename an executable file?
An executable file:
1) exists
2) is a file, not a directory
3) has a name ending with ".efi"
4) Only has a single '.' in the name.
If basename(filename) does not contain a '.', append ".efi" to filename
If filename ends in ".efi", it is executable, else it isn't.
This routine is used to when searching for the file named by argv[0].
As such, there is no need to search for extensions other than ".efi".
@param[in] filename The name of the file to test. It may, or may not, have an extension.
@retval 0 filename already has a path other than ".efi", or it doesn't exist, or is a directory.
@retval 1 filename refers to an executable file.
**/
static int
isxfile(char *filename)
{
struct stat buf;
char *bn;
char *newbn;
int bnlen;
bn = basename(filename); // Separate off the file name component
reduce(filename); // and isolate the path component
bnlen = strlen(bn);
newbn = strrchr(bn, '.'); // Does basename contain a period?
if(newbn == NULL) { // Does NOT contain a period.
newbn = &bn[bnlen];
strncpyX(newbn, ".efi", MAXPATHLEN - bnlen); // append ".efi" to basename
bnlen += 4;
}
else if(strcmp(newbn, ".efi") != 0) {
return 0; // File can not be executable.
}
joinpath(filename, bn); // Stitch path and file name back together
if (stat(filename, &buf) != 0) { // Now, verify that file exists
return 0;
}
if(S_ISDIR(buf.st_mode)) { // And it is not a directory.
return 0;
}
return 1;
}
/** Copy p into path, ensuring that the result is an absolute path.
copy_absolute requires that path be allocated at least
MAXPATHLEN + 1 bytes and that p be no more than MAXPATHLEN bytes.
@param[out] path Destination to receive the absolute path.
@param[in] p Path to be tested and possibly converted.
**/
static void
copy_absolute(char *path, char *p)
{
if (is_absolute(p) == 1)
strcpy(path, p);
else {
if (!getcwd(path, MAXPATHLEN)) {
/* unable to get the current directory */
if(volume_name[0] != 0) {
strcpy(path, volume_name);
joinpath(path, p);
}
else
strcpy(path, p);
return;
}
if (p[0] == '.' && is_sep(p[1]))
p += 2;
joinpath(path, p);
}
}
/** Modify path so that the result is an absolute path.
absolutize() requires that path be allocated at least MAXPATHLEN+1 bytes.
@param[in,out] path The path to be made absolute.
*/
static void
absolutize(char *path)
{
char buffer[MAXPATHLEN + 1];
if (is_absolute(path) == 1)
return;
copy_absolute(buffer, path);
strcpy(path, buffer);
}
/** Extract the volume name from a path.
@param[out] Dest Pointer to location in which to store the extracted volume name.
@param[in] path Pointer to the path to extract the volume name from.
**/
static void
set_volume(char *Dest, char *path)
{
size_t VolLen;
if(is_absolute(path)) {
VolLen = strcspn(path, "/\\:");
if((VolLen != 0) && (path[VolLen] == ':')) {
(void) strncpyX(Dest, path, VolLen + 1);
}
}
}
/** Determine paths.
Two directories must be found, the platform independent directory
(prefix), containing the common .py and .pyc files, and the platform
dependent directory (exec_prefix), containing the shared library
modules. Note that prefix and exec_prefix are the same directory
for UEFI installations.
Separate searches are carried out for prefix and exec_prefix.
Each search tries a number of different locations until a ``landmark''
file or directory is found. If no prefix or exec_prefix is found, a
warning message is issued and the preprocessor defined PREFIX and
EXEC_PREFIX are used (even though they may not work); python carries on
as best as is possible, but some imports may fail.
Before any searches are done, the location of the executable is
determined. If argv[0] has one or more slashes in it, it is used
unchanged. Otherwise, it must have been invoked from the shell's path,
so we search %PATH% for the named executable and use that. If the
executable was not found on %PATH% (or there was no %PATH% environment
variable), the original argv[0] string is used.
Finally, argv0_path is set to the directory containing the executable
(i.e. the last component is stripped).
With argv0_path in hand, we perform a number of steps. The same steps
are performed for prefix and for exec_prefix, but with a different
landmark.
The prefix landmark will always be lib/python.VERSION/os.py and the
exec_prefix will always be lib/python.VERSION/dynaload, where VERSION
is Python's version number as defined at the beginning of this file.
First. See if the %PYTHONHOME% environment variable points to the
installed location of the Python libraries. If %PYTHONHOME% is set, then
it points to prefix and exec_prefix. %PYTHONHOME% can be a single
directory, which is used for both, or the prefix and exec_prefix
directories separated by the DELIM character.
Next. Search the directories pointed to by the preprocessor variables
PREFIX and EXEC_PREFIX. These paths are prefixed with the volume name
extracted from argv0_path. The volume names correspond to the UEFI
shell "map" names.
That's it!
Well, almost. Once we have determined prefix and exec_prefix, the
preprocessor variable PYTHONPATH is used to construct a path. Each
relative path on PYTHONPATH is prefixed with prefix. Then the directory
containing the shared library modules is appended. The environment
variable $PYTHONPATH is inserted in front of it all. Finally, the
prefix and exec_prefix globals are tweaked so they reflect the values
expected by other code, by stripping the "lib/python$VERSION/..." stuff
off. This seems to make more sense given that currently the only
known use of sys.prefix and sys.exec_prefix is for the ILU installation
process to find the installed Python tree.
The final, fully resolved, paths should look something like:
fs0:/Efi/Tools/python.efi
fs0:/Efi/StdLib/lib/python27
fs0:/Efi/StdLib/lib/python27/dynaload
**/
static void
calculate_path(void)
{
extern char *Py_GetProgramName(void);
static char delimiter[2] = {DELIM, '\0'};
static char separator[2] = {SEP, '\0'};
char *pythonpath = PYTHONPATH;
char *rtpypath = Py_GETENV("PYTHONPATH");
//char *home = Py_GetPythonHome();
char *path = getenv("path");
char *prog = Py_GetProgramName();
char argv0_path[MAXPATHLEN+1];
char zip_path[MAXPATHLEN+1];
char *buf;
size_t bufsz;
size_t prefixsz;
char *defpath;
/* ###########################################################################
Determine path to the Python.efi binary.
Produces progpath, argv0_path, and volume_name.
########################################################################### */
/* If there is no slash in the argv0 path, then we have to
* assume python is on the user's $PATH, since there's no
* other way to find a directory to start the search from. If
* $PATH isn't exported, you lose.
*/
if (strchr(prog, SEP))
strncpy(progpath, prog, MAXPATHLEN);
else if (path) {
while (1) {
char *delim = strchr(path, DELIM);
if (delim) {
size_t len = delim - path;
if (len > MAXPATHLEN)
len = MAXPATHLEN;
strncpy(progpath, path, len);
*(progpath + len) = '\0';
}
else
strncpy(progpath, path, MAXPATHLEN);
joinpath(progpath, prog);
if (isxfile(progpath))
break;
if (!delim) {
progpath[0] = '\0';
break;
}
path = delim + 1;
}
}
else
progpath[0] = '\0';
if ( (!is_absolute(progpath)) && (progpath[0] != '\0') )
absolutize(progpath);
strncpy(argv0_path, progpath, MAXPATHLEN);
argv0_path[MAXPATHLEN] = '\0';
set_volume(volume_name, argv0_path);
reduce(argv0_path);
/* At this point, argv0_path is guaranteed to be less than
MAXPATHLEN bytes long.
*/
/* ###########################################################################
Build the FULL prefix string, including volume name.
This is the full path to the platform independent libraries.
########################################################################### */
strncpy(prefix, volume_name, MAXPATHLEN);
joinpath(prefix, PREFIX);
joinpath(prefix, lib_python);
/* ###########################################################################
Build the FULL path to the zipped-up Python library.
########################################################################### */
strncpy(zip_path, prefix, MAXPATHLEN);
zip_path[MAXPATHLEN] = '\0';
reduce(zip_path);
joinpath(zip_path, "python00.zip");
bufsz = strlen(zip_path); /* Replace "00" with version */
zip_path[bufsz - 6] = VERSION[0];
zip_path[bufsz - 5] = VERSION[1];
/* ###########################################################################
Build the FULL path to dynamically loadable libraries.
########################################################################### */
strncpy(exec_prefix, volume_name, MAXPATHLEN); // "fs0:"
joinpath(exec_prefix, EXEC_PREFIX); // "fs0:/Efi/StdLib"
joinpath(exec_prefix, lib_python); // "fs0:/Efi/StdLib/lib/python.27"
joinpath(exec_prefix, "lib-dynload"); // "fs0:/Efi/StdLib/lib/python.27/lib-dynload"
/* ###########################################################################
Build the module search path.
########################################################################### */
/* Reduce prefix and exec_prefix to their essence,
* e.g. /usr/local/lib/python1.5 is reduced to /usr/local.
* If we're loading relative to the build directory,
* return the compiled-in defaults instead.
*/
reduce(prefix);
reduce(prefix);
/* The prefix is the root directory, but reduce() chopped
* off the "/". */
if (!prefix[0]) {
strcpy(prefix, volume_name);
}
bufsz = strlen(prefix);
if(prefix[bufsz-1] == ':') { // if prefix consists solely of a volume_name
prefix[bufsz] = SEP; // then append SEP indicating the root directory
prefix[bufsz+1] = 0; // and ensure the new string is terminated
}
/* Calculate size of return buffer.
*/
defpath = pythonpath;
bufsz = 0;
if (rtpypath)
bufsz += strlen(rtpypath) + 1;
prefixsz = strlen(prefix) + 1;
while (1) {
char *delim = strchr(defpath, DELIM);
if (is_absolute(defpath) == 0)
/* Paths are relative to prefix */
bufsz += prefixsz;
if (delim)
bufsz += delim - defpath + 1;
else {
bufsz += strlen(defpath) + 1;
break;
}
defpath = delim + 1;
}
bufsz += strlen(zip_path) + 1;
bufsz += strlen(exec_prefix) + 1;
/* This is the only malloc call in this file */
buf = (char *)PyMem_Malloc(bufsz);
if (buf == NULL) {
/* We can't exit, so print a warning and limp along */
fprintf(stderr, "Not enough memory for dynamic PYTHONPATH.\n");
fprintf(stderr, "Using default static PYTHONPATH.\n");
module_search_path = PYTHONPATH;
}
else {
/* Run-time value of $PYTHONPATH goes first */
if (rtpypath) {
strcpy(buf, rtpypath);
strcat(buf, delimiter);
}
else
buf[0] = '\0';
/* Next is the default zip path */
strcat(buf, zip_path);
strcat(buf, delimiter);
/* Next goes merge of compile-time $PYTHONPATH with
* dynamically located prefix.
*/
defpath = pythonpath;
while (1) {
char *delim = strchr(defpath, DELIM);
if (is_absolute(defpath) != 1) {
strcat(buf, prefix);
strcat(buf, separator);
}
if (delim) {
size_t len = delim - defpath + 1;
size_t end = strlen(buf) + len;
strncat(buf, defpath, len);
*(buf + end) = '\0';
}
else {
strcat(buf, defpath);
break;
}
defpath = delim + 1;
}
strcat(buf, delimiter);
/* Finally, on goes the directory for dynamic-load modules */
strcat(buf, exec_prefix);
/* And publish the results */
module_search_path = buf;
}
/* At this point, exec_prefix is set to VOL:/Efi/StdLib/lib/python.27/dynalib.
We want to get back to the root value, so we have to remove the final three
segments to get VOL:/Efi/StdLib. Because we don't know what VOL is, and
EXEC_PREFIX is also indeterminate, we just remove the three final segments.
*/
reduce(exec_prefix);
reduce(exec_prefix);
reduce(exec_prefix);
if (!exec_prefix[0]) {
strcpy(exec_prefix, volume_name);
}
bufsz = strlen(exec_prefix);
if(exec_prefix[bufsz-1] == ':') {
exec_prefix[bufsz] = SEP;
exec_prefix[bufsz+1] = 0;
}
if (Py_VerboseFlag) PySys_WriteStderr("%s[%d]: module_search_path = \"%s\"\n", __func__, __LINE__, module_search_path);
if (Py_VerboseFlag) PySys_WriteStderr("%s[%d]: prefix = \"%s\"\n", __func__, __LINE__, prefix);
if (Py_VerboseFlag) PySys_WriteStderr("%s[%d]: exec_prefix = \"%s\"\n", __func__, __LINE__, exec_prefix);
if (Py_VerboseFlag) PySys_WriteStderr("%s[%d]: progpath = \"%s\"\n", __func__, __LINE__, progpath);
}
/* External interface */
char *
Py_GetPath(void)
{
if (!module_search_path)
calculate_path();
return module_search_path;
}
char *
Py_GetPrefix(void)
{
if (!module_search_path)
calculate_path();
return prefix;
}
char *
Py_GetExecPrefix(void)
{
if (!module_search_path)
calculate_path();
return exec_prefix;
}
char *
Py_GetProgramFullPath(void)
{
if (!module_search_path)
calculate_path();
return progpath;
}
#ifdef __cplusplus
}
#endif