# FLASH layout file for ARM VE. # # Copyright (c) 2011, ARM Limited. All rights reserved. # # This program and the accompanying materials # are licensed and made available under the terms and conditions of the BSD License # which accompanies this distribution. The full text of the license may be found at # http://opensource.org/licenses/bsd-license.php # # THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, # WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. # ################################################################################ # # FD Section # The [FD] Section is made up of the definition statements and a # description of what goes into the Flash Device Image. Each FD section # defines one flash "device" image. A flash device image may be one of # the following: Removable media bootable image (like a boot floppy # image,) an Option ROM image (that would be "flashed" into an add-in # card,) a System "Flash" image (that would be burned into a system's # flash) or an Update ("Capsule") image that will be used to update and # existing system flash. # ################################################################################ [FD.ArmRealViewEb_EFI] BaseAddress = 0x40000000 # The base address of the FLASH Device. Size = 0x00200000 # The size in bytes of the FLASH Device ErasePolarity = 1 BlockSize = 0x00010000 NumBlocks = 0x20 ################################################################################ # # Following are lists of FD Region layout which correspond to the locations of different # images within the flash device. # # Regions must be defined in ascending order and may not overlap. # # A Layout Region start with a eight digit hex offset (leading "0x" required) followed by # the pipe "|" character, followed by the size of the region, also in hex with the leading # "0x" characters. Like: # Offset|Size # PcdOffsetCName|PcdSizeCName # RegionType # ################################################################################ 0x00000000|0x00050000 gEmbeddedTokenSpaceGuid.PcdFlashFvSecBase|gEmbeddedTokenSpaceGuid.PcdFlashFvSecSize FV = FVMAIN_SEC 0x00050000|0x00100000 gEmbeddedTokenSpaceGuid.PcdFlashFvMainBase|gEmbeddedTokenSpaceGuid.PcdFlashFvMainSize FV = FVMAIN_COMPACT 0x00150000|0x00010000 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize #NV_VARIABLE_STORE DATA = { ## This is the EFI_FIRMWARE_VOLUME_HEADER # ZeroVector [] 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # FileSystemGuid: gEfiSystemNvDataFvGuid = # { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }} 0x8D, 0x2B, 0xF1, 0xFF, 0x96, 0x76, 0x8B, 0x4C, 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50, # FvLength: 0x20000 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, #Signature "_FVH" #Attributes 0x5f, 0x46, 0x56, 0x48, 0xff, 0xfe, 0x04, 0x00, #HeaderLength #CheckSum #ExtHeaderOffset #Reserved #Revision 0x48, 0x00, 0x36, 0x09, 0x00, 0x00, 0x00, 0x02, #Blockmap[0]: 2 Blocks * 0x10000 Bytes / Block 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, #Blockmap[1]: End 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, ## This is the VARIABLE_STORE_HEADER #Signature: gEfiVariableGuid = # { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }} 0x16, 0x36, 0xcf, 0xdd, 0x75, 0x32, 0x64, 0x41, 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d, #Size: 0xc000 (gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize) - 0x48 (size of EFI_FIRMWARE_VOLUME_HEADER) = 0xBFB8 # This can speed up the Variable Dispatch a bit. 0xB8, 0xBF, 0x00, 0x00, #FORMATTED: 0x5A #HEALTHY: 0xFE #Reserved: UINT16 #Reserved1: UINT32 0x5A, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 } ################################################################################ # # FV Section # # [FV] section is used to define what components or modules are placed within a flash # device file. This section also defines order the components and modules are positioned # within the image. The [FV] section consists of define statements, set statements and # module statements. # ################################################################################ [FV.FVMAIN_SEC] FvAlignment = 8 ERASE_POLARITY = 1 MEMORY_MAPPED = TRUE STICKY_WRITE = TRUE LOCK_CAP = TRUE LOCK_STATUS = TRUE WRITE_DISABLED_CAP = TRUE WRITE_ENABLED_CAP = TRUE WRITE_STATUS = TRUE WRITE_LOCK_CAP = TRUE WRITE_LOCK_STATUS = TRUE READ_DISABLED_CAP = TRUE READ_ENABLED_CAP = TRUE READ_STATUS = TRUE READ_LOCK_CAP = TRUE READ_LOCK_STATUS = TRUE INF ArmPlatformPkg/Sec/Sec.inf [FV.FvMain] BlockSize = 0x40 NumBlocks = 0 # This FV gets compressed so make it just big enough FvAlignment = 8 # FV alignment and FV attributes setting. ERASE_POLARITY = 1 MEMORY_MAPPED = TRUE STICKY_WRITE = TRUE LOCK_CAP = TRUE LOCK_STATUS = TRUE WRITE_DISABLED_CAP = TRUE WRITE_ENABLED_CAP = TRUE WRITE_STATUS = TRUE WRITE_LOCK_CAP = TRUE WRITE_LOCK_STATUS = TRUE READ_DISABLED_CAP = TRUE READ_ENABLED_CAP = TRUE READ_STATUS = TRUE READ_LOCK_CAP = TRUE READ_LOCK_STATUS = TRUE INF MdeModulePkg/Core/Dxe/DxeMain.inf # # PI DXE Drivers producing Architectural Protocols (EFI Services) # INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf INF MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe.inf INF EmbeddedPkg/EmbeddedMonotonicCounter/EmbeddedMonotonicCounter.inf INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf INF EmbeddedPkg/SimpleTextInOutSerial/SimpleTextInOutSerial.inf INF ArmPkg/Drivers/PL390Gic/PL390GicDxe.inf INF ArmPlatformPkg/Drivers/SP804TimerDxe/SP804TimerDxe.inf # # Semi-hosting filesystem # INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf # # FAT filesystem + GPT/MBR partitioning # INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf INF FatPkg/EnhancedFatDxe/Fat.inf INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf # # UEFI application (Shell Embedded Boot Loader) # INF EmbeddedPkg/Ebl/Ebl.inf # # Bds # INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf INF ArmPlatformPkg/Bds/Bds.inf [FV.FVMAIN_COMPACT] FvAlignment = 8 ERASE_POLARITY = 1 MEMORY_MAPPED = TRUE STICKY_WRITE = TRUE LOCK_CAP = TRUE LOCK_STATUS = TRUE WRITE_DISABLED_CAP = TRUE WRITE_ENABLED_CAP = TRUE WRITE_STATUS = TRUE WRITE_LOCK_CAP = TRUE WRITE_LOCK_STATUS = TRUE READ_DISABLED_CAP = TRUE READ_ENABLED_CAP = TRUE READ_STATUS = TRUE READ_LOCK_CAP = TRUE READ_LOCK_STATUS = TRUE INF ArmPlatformPkg/PrePeiCore/PrePeiCoreMPCore.inf INF MdeModulePkg/Core/Pei/PeiMain.inf INF ArmPlatformPkg/PlatformPei/PlatformPei.inf INF ArmPlatformPkg/MemoryInitPei/MemoryInitPei.inf INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 { SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE { SECTION FV_IMAGE = FVMAIN } } ################################################################################ # # Rules are use with the [FV] section's module INF type to define # how an FFS file is created for a given INF file. The following Rule are the default # rules for the different module type. User can add the customized rules to define the # content of the FFS file. # ################################################################################ ############################################################################ # Example of a DXE_DRIVER FFS file with a Checksum encapsulation section # ############################################################################ # #[Rule.Common.DXE_DRIVER] # FILE DRIVER = $(NAMED_GUID) { # DXE_DEPEX DXE_DEPEX Optional |.depex # COMPRESS PI_STD { # GUIDED { # PE32 PE32 |.efi # UI STRING="$(MODULE_NAME)" Optional # VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER) # } # } # } # ############################################################################ [Rule.Common.SEC] FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED { TE TE Align = 32 |.efi } [Rule.Common.PEI_CORE] FILE PEI_CORE = $(NAMED_GUID) { TE TE |.efi UI STRING ="$(MODULE_NAME)" Optional } [Rule.Common.PEIM] FILE PEIM = $(NAMED_GUID) { PEI_DEPEX PEI_DEPEX Optional |.depex TE TE |.efi UI STRING="$(MODULE_NAME)" Optional } [Rule.Common.PEIM.TIANOCOMPRESSED] FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 { PEI_DEPEX PEI_DEPEX Optional |.depex GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE { PE32 PE32 |.efi UI STRING="$(MODULE_NAME)" Optional } } [Rule.Common.DXE_CORE] FILE DXE_CORE = $(NAMED_GUID) { PE32 PE32 |.efi UI STRING="$(MODULE_NAME)" Optional } [Rule.Common.UEFI_DRIVER] FILE DRIVER = $(NAMED_GUID) { DXE_DEPEX DXE_DEPEX Optional |.depex PE32 PE32 |.efi UI STRING="$(MODULE_NAME)" Optional } [Rule.Common.DXE_DRIVER] FILE DRIVER = $(NAMED_GUID) { DXE_DEPEX DXE_DEPEX Optional |.depex PE32 PE32 |.efi UI STRING="$(MODULE_NAME)" Optional } [Rule.Common.DXE_RUNTIME_DRIVER] FILE DRIVER = $(NAMED_GUID) { DXE_DEPEX DXE_DEPEX Optional |.depex PE32 PE32 |.efi UI STRING="$(MODULE_NAME)" Optional } [Rule.Common.UEFI_APPLICATION] FILE APPLICATION = $(NAMED_GUID) { UI STRING ="$(MODULE_NAME)" Optional PE32 PE32 |.efi }