/** @file
Helper functions for configuring or getting the parameters relating to iSCSI.
Copyright (c) 2004 - 2017, Intel Corporation. All rights reserved.
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include "IScsiImpl.h"
CHAR16 mVendorStorageName[] = L"ISCSI_CONFIG_IFR_NVDATA";
BOOLEAN mIScsiDeviceListUpdated = FALSE;
UINTN mNumberOfIScsiDevices = 0;
ISCSI_FORM_CALLBACK_INFO *mCallbackInfo = NULL;
HII_VENDOR_DEVICE_PATH mIScsiHiiVendorDevicePath = {
{
{
HARDWARE_DEVICE_PATH,
HW_VENDOR_DP,
{
(UINT8) (sizeof (VENDOR_DEVICE_PATH)),
(UINT8) ((sizeof (VENDOR_DEVICE_PATH)) >> 8)
}
},
ISCSI_CONFIG_GUID
},
{
END_DEVICE_PATH_TYPE,
END_ENTIRE_DEVICE_PATH_SUBTYPE,
{
(UINT8) (END_DEVICE_PATH_LENGTH),
(UINT8) ((END_DEVICE_PATH_LENGTH) >> 8)
}
}
};
/**
Convert the IP address into a dotted string.
@param[in] Ip The IP address.
@param[in] Ipv6Flag Indicates whether the IP address is version 4 or version 6.
@param[out] Str The formatted IP string.
**/
VOID
IScsiIpToStr (
IN EFI_IP_ADDRESS *Ip,
IN BOOLEAN Ipv6Flag,
OUT CHAR16 *Str
)
{
EFI_IPv4_ADDRESS *Ip4;
EFI_IPv6_ADDRESS *Ip6;
UINTN Index;
BOOLEAN Short;
UINTN Number;
CHAR16 FormatString[8];
if (!Ipv6Flag) {
Ip4 = &Ip->v4;
UnicodeSPrint (
Str,
(UINTN) 2 * IP4_STR_MAX_SIZE,
L"%d.%d.%d.%d",
(UINTN) Ip4->Addr[0],
(UINTN) Ip4->Addr[1],
(UINTN) Ip4->Addr[2],
(UINTN) Ip4->Addr[3]
);
return ;
}
Ip6 = &Ip->v6;
Short = FALSE;
for (Index = 0; Index < 15; Index = Index + 2) {
if (!Short &&
Index % 2 == 0 &&
Ip6->Addr[Index] == 0 &&
Ip6->Addr[Index + 1] == 0
) {
//
// Deal with the case of ::.
//
if (Index == 0) {
*Str = L':';
*(Str + 1) = L':';
Str = Str + 2;
} else {
*Str = L':';
Str = Str + 1;
}
while ((Index < 15) && (Ip6->Addr[Index] == 0) && (Ip6->Addr[Index + 1] == 0)) {
Index = Index + 2;
}
Short = TRUE;
if (Index == 16) {
//
// :: is at the end of the address.
//
*Str = L'\0';
break;
}
}
ASSERT (Index < 15);
if (Ip6->Addr[Index] == 0) {
Number = UnicodeSPrint (Str, 2 * IP_STR_MAX_SIZE, L"%x:", (UINTN) Ip6->Addr[Index + 1]);
} else {
if (Ip6->Addr[Index + 1] < 0x10) {
CopyMem (FormatString, L"%x0%x:", StrSize (L"%x0%x:"));
} else {
CopyMem (FormatString, L"%x%x:", StrSize (L"%x%x:"));
}
Number = UnicodeSPrint (
Str,
2 * IP_STR_MAX_SIZE,
(CONST CHAR16 *) FormatString,
(UINTN) Ip6->Addr[Index],
(UINTN) Ip6->Addr[Index + 1]
);
}
Str = Str + Number;
if (Index + 2 == 16) {
*Str = L'\0';
if (*(Str - 1) == L':') {
*(Str - 1) = L'\0';
}
}
}
}
/**
Check whether the input IP address is valid.
@param[in] Ip The IP address.
@param[in] IpMode Indicates iSCSI running on IP4 or IP6 stack.
@retval TRUE The input IP address is valid.
@retval FALSE Otherwise
**/
BOOLEAN
IpIsUnicast (
IN EFI_IP_ADDRESS *Ip,
IN UINT8 IpMode
)
{
if (IpMode == IP_MODE_IP4) {
if (IP4_IS_UNSPECIFIED (NTOHL (Ip->Addr[0])) || IP4_IS_LOCAL_BROADCAST (NTOHL (Ip->Addr[0]))) {
return FALSE;
}
return TRUE;
} else if (IpMode == IP_MODE_IP6) {
return NetIp6IsValidUnicast (&Ip->v6);
} else {
DEBUG ((DEBUG_ERROR, "IpMode %d is invalid when configuring the iSCSI target IP!\n", IpMode));
return FALSE;
}
}
/**
Parse IsId in string format and convert it to binary.
@param[in] String The buffer of the string to be parsed.
@param[in, out] IsId The buffer to store IsId.
@retval EFI_SUCCESS The operation finished successfully.
@retval EFI_INVALID_PARAMETER Any input parameter is invalid.
**/
EFI_STATUS
IScsiParseIsIdFromString (
IN CONST CHAR16 *String,
IN OUT UINT8 *IsId
)
{
UINT8 Index;
CHAR16 *IsIdStr;
CHAR16 TempStr[3];
UINTN NodeVal;
CHAR16 PortString[ISCSI_NAME_IFR_MAX_SIZE];
EFI_INPUT_KEY Key;
if ((String == NULL) || (IsId == NULL)) {
return EFI_INVALID_PARAMETER;
}
IsIdStr = (CHAR16 *) String;
if (StrLen (IsIdStr) != 6) {
UnicodeSPrint (
PortString,
(UINTN) ISCSI_NAME_IFR_MAX_SIZE,
L"Error! Input is incorrect, please input 6 hex numbers!\n"
);
CreatePopUp (
EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
&Key,
PortString,
NULL
);
return EFI_INVALID_PARAMETER;
}
for (Index = 3; Index < 6; Index++) {
CopyMem (TempStr, IsIdStr, sizeof (TempStr));
TempStr[2] = L'\0';
//
// Convert the string to IsId. StrHexToUintn stops at the first character
// that is not a valid hex character, '\0' here.
//
NodeVal = StrHexToUintn (TempStr);
IsId[Index] = (UINT8) NodeVal;
IsIdStr = IsIdStr + 2;
}
return EFI_SUCCESS;
}
/**
Convert IsId from binary to string format.
@param[out] String The buffer to store the converted string.
@param[in] IsId The buffer to store IsId.
@retval EFI_SUCCESS The string converted successfully.
@retval EFI_INVALID_PARAMETER Any input parameter is invalid.
**/
EFI_STATUS
IScsiConvertIsIdToString (
OUT CHAR16 *String,
IN UINT8 *IsId
)
{
UINT8 Index;
UINTN Number;
if ((String == NULL) || (IsId == NULL)) {
return EFI_INVALID_PARAMETER;
}
for (Index = 0; Index < 6; Index++) {
if (IsId[Index] <= 0xF) {
Number = UnicodeSPrint (
String,
2 * ISID_CONFIGURABLE_STORAGE,
L"0%X",
(UINTN) IsId[Index]
);
} else {
Number = UnicodeSPrint (
String,
2 * ISID_CONFIGURABLE_STORAGE,
L"%X",
(UINTN) IsId[Index]
);
}
String = String + Number;
}
*String = L'\0';
return EFI_SUCCESS;
}
/**
Get the attempt config data from global structure by the ConfigIndex.
@param[in] AttemptConfigIndex The unique index indicates the attempt.
@return Pointer to the attempt config data.
@retval NULL The attempt configuration data cannot be found.
**/
ISCSI_ATTEMPT_CONFIG_NVDATA *
IScsiConfigGetAttemptByConfigIndex (
IN UINT8 AttemptConfigIndex
)
{
LIST_ENTRY *Entry;
ISCSI_ATTEMPT_CONFIG_NVDATA *Attempt;
NET_LIST_FOR_EACH (Entry, &mPrivate->AttemptConfigs) {
Attempt = NET_LIST_USER_STRUCT (Entry, ISCSI_ATTEMPT_CONFIG_NVDATA, Link);
if (Attempt->AttemptConfigIndex == AttemptConfigIndex) {
return Attempt;
}
}
return NULL;
}
/**
Get the existing attempt config data from global structure by the NicIndex.
@param[in] NewAttempt The created new attempt
@param[in] IScsiMode The IScsi Mode of the new attempt, Enabled or
Enabled for MPIO.
@return Pointer to the existing attempt config data which
has the same NICIndex as the new created attempt.
@retval NULL The attempt with NicIndex does not exist.
**/
ISCSI_ATTEMPT_CONFIG_NVDATA *
IScsiConfigGetAttemptByNic (
IN ISCSI_ATTEMPT_CONFIG_NVDATA *NewAttempt,
IN UINT8 IScsiMode
)
{
LIST_ENTRY *Entry;
ISCSI_ATTEMPT_CONFIG_NVDATA *Attempt;
NET_LIST_FOR_EACH (Entry, &mPrivate->AttemptConfigs) {
Attempt = NET_LIST_USER_STRUCT (Entry, ISCSI_ATTEMPT_CONFIG_NVDATA, Link);
if (Attempt != NewAttempt && Attempt->NicIndex == NewAttempt->NicIndex &&
Attempt->SessionConfigData.Enabled == IScsiMode) {
return Attempt;
}
}
return NULL;
}
/**
Convert the iSCSI configuration data into the IFR data.
@param[in] Attempt The iSCSI attempt config data.
@param[in, out] IfrNvData The IFR nv data.
**/
VOID
IScsiConvertAttemptConfigDataToIfrNvData (
IN ISCSI_ATTEMPT_CONFIG_NVDATA *Attempt,
IN OUT ISCSI_CONFIG_IFR_NVDATA *IfrNvData
)
{
ISCSI_SESSION_CONFIG_NVDATA *SessionConfigData;
ISCSI_CHAP_AUTH_CONFIG_NVDATA *AuthConfigData;
EFI_IP_ADDRESS Ip;
BOOLEAN DnsMode;
//
// Normal session configuration parameters.
//
SessionConfigData = &Attempt->SessionConfigData;
IfrNvData->Enabled = SessionConfigData->Enabled;
IfrNvData->IpMode = SessionConfigData->IpMode;
DnsMode = SessionConfigData->DnsMode;
IfrNvData->InitiatorInfoFromDhcp = SessionConfigData->InitiatorInfoFromDhcp;
IfrNvData->TargetInfoFromDhcp = SessionConfigData->TargetInfoFromDhcp;
IfrNvData->TargetPort = SessionConfigData->TargetPort;
if (IfrNvData->IpMode == IP_MODE_IP4) {
CopyMem (&Ip.v4, &SessionConfigData->LocalIp, sizeof (EFI_IPv4_ADDRESS));
IScsiIpToStr (&Ip, FALSE, IfrNvData->LocalIp);
CopyMem (&Ip.v4, &SessionConfigData->SubnetMask, sizeof (EFI_IPv4_ADDRESS));
IScsiIpToStr (&Ip, FALSE, IfrNvData->SubnetMask);
CopyMem (&Ip.v4, &SessionConfigData->Gateway, sizeof (EFI_IPv4_ADDRESS));
IScsiIpToStr (&Ip, FALSE, IfrNvData->Gateway);
if (SessionConfigData->TargetIp.v4.Addr[0] != '\0') {
CopyMem (&Ip.v4, &SessionConfigData->TargetIp, sizeof (EFI_IPv4_ADDRESS));
IScsiIpToStr (&Ip, FALSE, IfrNvData->TargetIp);
}
} else if (IfrNvData->IpMode == IP_MODE_IP6) {
ZeroMem (IfrNvData->TargetIp, sizeof (IfrNvData->TargetIp));
if (SessionConfigData->TargetIp.v6.Addr[0] != '\0') {
IP6_COPY_ADDRESS (&Ip.v6, &SessionConfigData->TargetIp);
IScsiIpToStr (&Ip, TRUE, IfrNvData->TargetIp);
}
}
AsciiStrToUnicodeStrS (
SessionConfigData->TargetName,
IfrNvData->TargetName,
sizeof (IfrNvData->TargetName) / sizeof (IfrNvData->TargetName[0])
);
if (DnsMode) {
AsciiStrToUnicodeStrS (
SessionConfigData->TargetUrl,
IfrNvData->TargetIp,
sizeof (IfrNvData->TargetIp) / sizeof (IfrNvData->TargetIp[0])
);
}
IScsiLunToUnicodeStr (SessionConfigData->BootLun, IfrNvData->BootLun);
IScsiConvertIsIdToString (IfrNvData->IsId, SessionConfigData->IsId);
IfrNvData->ConnectRetryCount = SessionConfigData->ConnectRetryCount;
IfrNvData->ConnectTimeout = SessionConfigData->ConnectTimeout;
//
// Authentication parameters.
//
IfrNvData->AuthenticationType = Attempt->AuthenticationType;
if (IfrNvData->AuthenticationType == ISCSI_AUTH_TYPE_CHAP) {
AuthConfigData = &Attempt->AuthConfigData.CHAP;
IfrNvData->CHAPType = AuthConfigData->CHAPType;
AsciiStrToUnicodeStrS (
AuthConfigData->CHAPName,
IfrNvData->CHAPName,
sizeof (IfrNvData->CHAPName) / sizeof (IfrNvData->CHAPName[0])
);
AsciiStrToUnicodeStrS (
AuthConfigData->CHAPSecret,
IfrNvData->CHAPSecret,
sizeof (IfrNvData->CHAPSecret) / sizeof (IfrNvData->CHAPSecret[0])
);
AsciiStrToUnicodeStrS (
AuthConfigData->ReverseCHAPName,
IfrNvData->ReverseCHAPName,
sizeof (IfrNvData->ReverseCHAPName) / sizeof (IfrNvData->ReverseCHAPName[0])
);
AsciiStrToUnicodeStrS (
AuthConfigData->ReverseCHAPSecret,
IfrNvData->ReverseCHAPSecret,
sizeof (IfrNvData->ReverseCHAPSecret) / sizeof (IfrNvData->ReverseCHAPSecret[0])
);
}
//
// Other parameters.
//
AsciiStrToUnicodeStrS (
Attempt->AttemptName,
IfrNvData->AttemptName,
sizeof (IfrNvData->AttemptName) / sizeof (IfrNvData->AttemptName[0])
);
}
/**
Convert the IFR data to iSCSI configuration data.
@param[in] IfrNvData Point to ISCSI_CONFIG_IFR_NVDATA.
@param[in, out] Attempt The iSCSI attempt config data.
@retval EFI_INVALID_PARAMETER Any input or configured parameter is invalid.
@retval EFI_NOT_FOUND Cannot find the corresponding variable.
@retval EFI_OUT_OF_RESOURCES The operation is failed due to lack of resources.
@retval EFI_ABORTED The operation is aborted.
@retval EFI_SUCCESS The operation is completed successfully.
**/
EFI_STATUS
IScsiConvertIfrNvDataToAttemptConfigData (
IN ISCSI_CONFIG_IFR_NVDATA *IfrNvData,
IN OUT ISCSI_ATTEMPT_CONFIG_NVDATA *Attempt
)
{
EFI_IP_ADDRESS HostIp;
EFI_IP_ADDRESS SubnetMask;
EFI_IP_ADDRESS Gateway;
CHAR16 *MacString;
CHAR16 *AttemptName1;
CHAR16 *AttemptName2;
ISCSI_ATTEMPT_CONFIG_NVDATA *ExistAttempt;
ISCSI_ATTEMPT_CONFIG_NVDATA *SameNicAttempt;
CHAR16 IScsiMode[64];
CHAR16 IpMode[64];
ISCSI_NIC_INFO *NicInfo;
EFI_INPUT_KEY Key;
UINT8 *AttemptConfigOrder;
UINTN AttemptConfigOrderSize;
UINT8 *AttemptOrderTmp;
UINTN TotalNumber;
EFI_STATUS Status;
if (IfrNvData == NULL || Attempt == NULL) {
return EFI_INVALID_PARAMETER;
}
//
// Update those fields which don't have INTERACTIVE attribute.
//
Attempt->SessionConfigData.ConnectRetryCount = IfrNvData->ConnectRetryCount;
Attempt->SessionConfigData.ConnectTimeout = IfrNvData->ConnectTimeout;
Attempt->SessionConfigData.IpMode = IfrNvData->IpMode;
if (IfrNvData->IpMode < IP_MODE_AUTOCONFIG) {
Attempt->SessionConfigData.InitiatorInfoFromDhcp = IfrNvData->InitiatorInfoFromDhcp;
Attempt->SessionConfigData.TargetPort = IfrNvData->TargetPort;
if (Attempt->SessionConfigData.TargetPort == 0) {
Attempt->SessionConfigData.TargetPort = ISCSI_WELL_KNOWN_PORT;
}
Attempt->SessionConfigData.TargetInfoFromDhcp = IfrNvData->TargetInfoFromDhcp;
}
Attempt->AuthenticationType = IfrNvData->AuthenticationType;
if (Attempt->AuthenticationType == ISCSI_AUTH_TYPE_CHAP) {
Attempt->AuthConfigData.CHAP.CHAPType = IfrNvData->CHAPType;
}
//
// Only do full parameter validation if iSCSI is enabled on this device.
//
if (IfrNvData->Enabled != ISCSI_DISABLED) {
if (Attempt->SessionConfigData.ConnectTimeout < CONNECT_MIN_TIMEOUT) {
CreatePopUp (
EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
&Key,
L"Connection Establishing Timeout is less than minimum value 100ms.",
NULL
);
return EFI_INVALID_PARAMETER;
}
//
// Validate the address configuration of the Initiator if DHCP isn't
// deployed.
//
if (!Attempt->SessionConfigData.InitiatorInfoFromDhcp) {
CopyMem (&HostIp.v4, &Attempt->SessionConfigData.LocalIp, sizeof (HostIp.v4));
CopyMem (&SubnetMask.v4, &Attempt->SessionConfigData.SubnetMask, sizeof (SubnetMask.v4));
CopyMem (&Gateway.v4, &Attempt->SessionConfigData.Gateway, sizeof (Gateway.v4));
if ((Gateway.Addr[0] != 0)) {
if (SubnetMask.Addr[0] == 0) {
CreatePopUp (
EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
&Key,
L"Gateway address is set but subnet mask is zero.",
NULL
);
return EFI_INVALID_PARAMETER;
} else if (!IP4_NET_EQUAL (HostIp.Addr[0], Gateway.Addr[0], SubnetMask.Addr[0])) {
CreatePopUp (
EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
&Key,
L"Local IP and Gateway are not in the same subnet.",
NULL
);
return EFI_INVALID_PARAMETER;
}
}
}
//
// Validate target configuration if DHCP isn't deployed.
//
if (!Attempt->SessionConfigData.TargetInfoFromDhcp && Attempt->SessionConfigData.IpMode < IP_MODE_AUTOCONFIG) {
if (!Attempt->SessionConfigData.DnsMode) {
if (!IpIsUnicast (&Attempt->SessionConfigData.TargetIp, IfrNvData->IpMode)) {
CreatePopUp (
EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
&Key,
L"Target IP is invalid!",
NULL
);
return EFI_INVALID_PARAMETER;
}
} else {
if (Attempt->SessionConfigData.TargetUrl[0] == '\0') {
CreatePopUp (
EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
&Key,
L"iSCSI target Url should not be NULL!",
NULL
);
return EFI_INVALID_PARAMETER;
}
}
//
// Validate iSCSI target name configuration again:
// The format of iSCSI target name is already verified in IScsiFormCallback() when
// user input the name; here we only check the case user does not input the name.
//
if (Attempt->SessionConfigData.TargetName[0] == '\0') {
CreatePopUp (
EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
&Key,
L"iSCSI target name is NULL!",
NULL
);
return EFI_INVALID_PARAMETER;
}
}
//
// Validate the authentication info.
//
if (IfrNvData->AuthenticationType == ISCSI_AUTH_TYPE_CHAP) {
if ((IfrNvData->CHAPName[0] == '\0') || (IfrNvData->CHAPSecret[0] == '\0')) {
CreatePopUp (
EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
&Key,
L"CHAP Name or CHAP Secret is invalid!",
NULL
);
return EFI_INVALID_PARAMETER;
}
if ((IfrNvData->CHAPType == ISCSI_CHAP_MUTUAL) &&
((IfrNvData->ReverseCHAPName[0] == '\0') || (IfrNvData->ReverseCHAPSecret[0] == '\0'))
) {
CreatePopUp (
EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
&Key,
L"Reverse CHAP Name or Reverse CHAP Secret is invalid!",
NULL
);
return EFI_INVALID_PARAMETER;
}
}
//
// Check whether this attempt uses NIC which is already used by existing attempt.
//
SameNicAttempt = IScsiConfigGetAttemptByNic (Attempt, IfrNvData->Enabled);
if (SameNicAttempt != NULL) {
AttemptName1 = (CHAR16 *) AllocateZeroPool (ATTEMPT_NAME_MAX_SIZE * sizeof (CHAR16));
if (AttemptName1 == NULL) {
return EFI_OUT_OF_RESOURCES;
}
AttemptName2 = (CHAR16 *) AllocateZeroPool (ATTEMPT_NAME_MAX_SIZE * sizeof (CHAR16));
if (AttemptName2 == NULL) {
FreePool (AttemptName1);
return EFI_OUT_OF_RESOURCES;
}
AsciiStrToUnicodeStrS (Attempt->AttemptName, AttemptName1, ATTEMPT_NAME_MAX_SIZE);
if (StrLen (AttemptName1) > ATTEMPT_NAME_SIZE) {
CopyMem (&AttemptName1[ATTEMPT_NAME_SIZE], L"...", 4 * sizeof (CHAR16));
}
AsciiStrToUnicodeStrS (SameNicAttempt->AttemptName, AttemptName2, ATTEMPT_NAME_MAX_SIZE);
if (StrLen (AttemptName2) > ATTEMPT_NAME_SIZE) {
CopyMem (&AttemptName2[ATTEMPT_NAME_SIZE], L"...", 4 * sizeof (CHAR16));
}
UnicodeSPrint (
mPrivate->PortString,
(UINTN) ISCSI_NAME_IFR_MAX_SIZE,
L"Warning! Attempt \"%s\" uses same NIC as Attempt \"%s\".",
AttemptName1,
AttemptName2
);
CreatePopUp (
EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
&Key,
mPrivate->PortString,
NULL
);
FreePool (AttemptName1);
FreePool (AttemptName2);
}
}
//
// Update the iSCSI Mode data and record it in attempt help info.
//
Attempt->SessionConfigData.Enabled = IfrNvData->Enabled;
if (IfrNvData->Enabled == ISCSI_DISABLED) {
UnicodeSPrint (IScsiMode, 64, L"Disabled");
} else if (IfrNvData->Enabled == ISCSI_ENABLED) {
UnicodeSPrint (IScsiMode, 64, L"Enabled");
} else if (IfrNvData->Enabled == ISCSI_ENABLED_FOR_MPIO) {
UnicodeSPrint (IScsiMode, 64, L"Enabled for MPIO");
}
if (IfrNvData->IpMode == IP_MODE_IP4) {
UnicodeSPrint (IpMode, 64, L"IP4");
} else if (IfrNvData->IpMode == IP_MODE_IP6) {
UnicodeSPrint (IpMode, 64, L"IP6");
} else if (IfrNvData->IpMode == IP_MODE_AUTOCONFIG) {
UnicodeSPrint (IpMode, 64, L"Autoconfigure");
}
NicInfo = IScsiGetNicInfoByIndex (Attempt->NicIndex);
if (NicInfo == NULL) {
return EFI_NOT_FOUND;
}
MacString = (CHAR16 *) AllocateZeroPool (ISCSI_MAX_MAC_STRING_LEN * sizeof (CHAR16));
if (MacString == NULL) {
return EFI_OUT_OF_RESOURCES;
}
AsciiStrToUnicodeStrS (Attempt->MacString, MacString, ISCSI_MAX_MAC_STRING_LEN);
UnicodeSPrint (
mPrivate->PortString,
(UINTN) ISCSI_NAME_IFR_MAX_SIZE,
L"MAC: %s, PFA: Bus %d | Dev %d | Func %d, iSCSI mode: %s, IP version: %s",
MacString,
NicInfo->BusNumber,
NicInfo->DeviceNumber,
NicInfo->FunctionNumber,
IScsiMode,
IpMode
);
Attempt->AttemptTitleHelpToken = HiiSetString (
mCallbackInfo->RegisteredHandle,
Attempt->AttemptTitleHelpToken,
mPrivate->PortString,
NULL
);
if (Attempt->AttemptTitleHelpToken == 0) {
FreePool (MacString);
return EFI_OUT_OF_RESOURCES;
}
//
// Check whether this attempt is an existing one.
//
ExistAttempt = IScsiConfigGetAttemptByConfigIndex (Attempt->AttemptConfigIndex);
if (ExistAttempt != NULL) {
ASSERT (ExistAttempt == Attempt);
if (IfrNvData->Enabled == ISCSI_DISABLED &&
Attempt->SessionConfigData.Enabled != ISCSI_DISABLED) {
//
// User updates the Attempt from "Enabled"/"Enabled for MPIO" to "Disabled".
//
if (Attempt->SessionConfigData.Enabled == ISCSI_ENABLED_FOR_MPIO) {
if (mPrivate->MpioCount < 1) {
return EFI_ABORTED;
}
if (--mPrivate->MpioCount == 0) {
mPrivate->EnableMpio = FALSE;
}
} else if (Attempt->SessionConfigData.Enabled == ISCSI_ENABLED) {
if (mPrivate->SinglePathCount < 1) {
return EFI_ABORTED;
}
mPrivate->SinglePathCount--;
}
} else if (IfrNvData->Enabled == ISCSI_ENABLED_FOR_MPIO &&
Attempt->SessionConfigData.Enabled == ISCSI_ENABLED) {
//
// User updates the Attempt from "Enabled" to "Enabled for MPIO".
//
if (mPrivate->SinglePathCount < 1) {
return EFI_ABORTED;
}
mPrivate->EnableMpio = TRUE;
mPrivate->MpioCount++;
mPrivate->SinglePathCount--;
} else if (IfrNvData->Enabled == ISCSI_ENABLED &&
Attempt->SessionConfigData.Enabled == ISCSI_ENABLED_FOR_MPIO) {
//
// User updates the Attempt from "Enabled for MPIO" to "Enabled".
//
if (mPrivate->MpioCount < 1) {
return EFI_ABORTED;
}
if (--mPrivate->MpioCount == 0) {
mPrivate->EnableMpio = FALSE;
}
mPrivate->SinglePathCount++;
} else if (IfrNvData->Enabled != ISCSI_DISABLED &&
Attempt->SessionConfigData.Enabled == ISCSI_DISABLED) {
//
// User updates the Attempt from "Disabled" to "Enabled"/"Enabled for MPIO".
//
if (IfrNvData->Enabled == ISCSI_ENABLED_FOR_MPIO) {
mPrivate->EnableMpio = TRUE;
mPrivate->MpioCount++;
} else if (IfrNvData->Enabled == ISCSI_ENABLED) {
mPrivate->SinglePathCount++;
}
}
} else if (ExistAttempt == NULL) {
//
// When a new attempt is created, pointer of the attempt is saved to
// mPrivate->NewAttempt, and also saved to mCallbackInfo->Current in
// IScsiConfigProcessDefault. If input Attempt does not match any existing
// attempt, it should be a new created attempt. Save it to system now.
//
ASSERT (Attempt == mPrivate->NewAttempt);
//
// Save current order number for this attempt.
//
AttemptConfigOrder = IScsiGetVariableAndSize (
L"AttemptOrder",
&gIScsiConfigGuid,
&AttemptConfigOrderSize
);
TotalNumber = AttemptConfigOrderSize / sizeof (UINT8);
TotalNumber++;
//
// Append the new created attempt order to the end.
//
AttemptOrderTmp = AllocateZeroPool (TotalNumber * sizeof (UINT8));
if (AttemptOrderTmp == NULL) {
if (AttemptConfigOrder != NULL) {
FreePool (AttemptConfigOrder);
}
return EFI_OUT_OF_RESOURCES;
}
if (AttemptConfigOrder != NULL) {
CopyMem (AttemptOrderTmp, AttemptConfigOrder, AttemptConfigOrderSize);
FreePool (AttemptConfigOrder);
}
AttemptOrderTmp[TotalNumber - 1] = Attempt->AttemptConfigIndex;
AttemptConfigOrder = AttemptOrderTmp;
AttemptConfigOrderSize = TotalNumber * sizeof (UINT8);
Status = gRT->SetVariable (
L"AttemptOrder",
&gIScsiConfigGuid,
EFI_VARIABLE_BOOTSERVICE_ACCESS | EFI_VARIABLE_NON_VOLATILE,
AttemptConfigOrderSize,
AttemptConfigOrder
);
FreePool (AttemptConfigOrder);
if (EFI_ERROR (Status)) {
return Status;
}
//
// Insert new created attempt to array.
//
InsertTailList (&mPrivate->AttemptConfigs, &Attempt->Link);
mPrivate->AttemptCount++;
//
// Reset mPrivate->NewAttempt to NULL, which indicates none attempt is created
// but not saved now.
//
mPrivate->NewAttempt = NULL;
if (IfrNvData->Enabled == ISCSI_ENABLED_FOR_MPIO) {
//
// This new Attempt is enabled for MPIO; enable the multipath mode.
//
mPrivate->EnableMpio = TRUE;
mPrivate->MpioCount++;
} else if (IfrNvData->Enabled == ISCSI_ENABLED) {
mPrivate->SinglePathCount++;
}
IScsiConfigUpdateAttempt ();
}
//
// Record the user configuration information in NVR.
//
UnicodeSPrint (
mPrivate->PortString,
(UINTN) ISCSI_NAME_IFR_MAX_SIZE,
L"%s%d",
MacString,
(UINTN) Attempt->AttemptConfigIndex
);
FreePool (MacString);
return gRT->SetVariable (
mPrivate->PortString,
&gEfiIScsiInitiatorNameProtocolGuid,
ISCSI_CONFIG_VAR_ATTR,
sizeof (ISCSI_ATTEMPT_CONFIG_NVDATA),
Attempt
);
}
/**
Create Hii Extend Label OpCode as the start opcode and end opcode. It is
a help function.
@param[in] StartLabelNumber The number of start label.
@param[out] StartOpCodeHandle Points to the start opcode handle.
@param[out] StartLabel Points to the created start opcode.
@param[out] EndOpCodeHandle Points to the end opcode handle.
@param[out] EndLabel Points to the created end opcode.
@retval EFI_OUT_OF_RESOURCES Do not have sufficient resource to finish this
operation.
@retval EFI_INVALID_PARAMETER Any input parameter is invalid.
@retval EFI_SUCCESS The operation is completed successfully.
**/
EFI_STATUS
IScsiCreateOpCode (
IN UINT16 StartLabelNumber,
OUT VOID **StartOpCodeHandle,
OUT EFI_IFR_GUID_LABEL **StartLabel,
OUT VOID **EndOpCodeHandle,
OUT EFI_IFR_GUID_LABEL **EndLabel
)
{
EFI_STATUS Status;
EFI_IFR_GUID_LABEL *InternalStartLabel;
EFI_IFR_GUID_LABEL *InternalEndLabel;
if (StartOpCodeHandle == NULL || StartLabel == NULL || EndOpCodeHandle == NULL || EndLabel == NULL) {
return EFI_INVALID_PARAMETER;
}
*StartOpCodeHandle = NULL;
*EndOpCodeHandle = NULL;
Status = EFI_OUT_OF_RESOURCES;
//
// Initialize the container for dynamic opcodes.
//
*StartOpCodeHandle = HiiAllocateOpCodeHandle ();
if (*StartOpCodeHandle == NULL) {
return Status;
}
*EndOpCodeHandle = HiiAllocateOpCodeHandle ();
if (*EndOpCodeHandle == NULL) {
goto Exit;
}
//
// Create Hii Extend Label OpCode as the start opcode.
//
InternalStartLabel = (EFI_IFR_GUID_LABEL *) HiiCreateGuidOpCode (
*StartOpCodeHandle,
&gEfiIfrTianoGuid,
NULL,
sizeof (EFI_IFR_GUID_LABEL)
);
if (InternalStartLabel == NULL) {
goto Exit;
}
InternalStartLabel->ExtendOpCode = EFI_IFR_EXTEND_OP_LABEL;
InternalStartLabel->Number = StartLabelNumber;
//
// Create Hii Extend Label OpCode as the end opcode.
//
InternalEndLabel = (EFI_IFR_GUID_LABEL *) HiiCreateGuidOpCode (
*EndOpCodeHandle,
&gEfiIfrTianoGuid,
NULL,
sizeof (EFI_IFR_GUID_LABEL)
);
if (InternalEndLabel == NULL) {
goto Exit;
}
InternalEndLabel->ExtendOpCode = EFI_IFR_EXTEND_OP_LABEL;
InternalEndLabel->Number = LABEL_END;
*StartLabel = InternalStartLabel;
*EndLabel = InternalEndLabel;
return EFI_SUCCESS;
Exit:
if (*StartOpCodeHandle != NULL) {
HiiFreeOpCodeHandle (*StartOpCodeHandle);
}
if (*EndOpCodeHandle != NULL) {
HiiFreeOpCodeHandle (*EndOpCodeHandle);
}
return Status;
}
/**
Callback function when user presses "Add an Attempt".
@retval EFI_OUT_OF_RESOURCES Does not have sufficient resources to finish this
operation.
@retval EFI_SUCCESS The operation is completed successfully.
**/
EFI_STATUS
IScsiConfigAddAttempt (
VOID
)
{
LIST_ENTRY *Entry;
ISCSI_NIC_INFO *NicInfo;
EFI_STRING_ID PortTitleToken;
EFI_STRING_ID PortTitleHelpToken;
CHAR16 MacString[ISCSI_MAX_MAC_STRING_LEN];
EFI_STATUS Status;
VOID *StartOpCodeHandle;
EFI_IFR_GUID_LABEL *StartLabel;
VOID *EndOpCodeHandle;
EFI_IFR_GUID_LABEL *EndLabel;
Status = IScsiCreateOpCode (
MAC_ENTRY_LABEL,
&StartOpCodeHandle,
&StartLabel,
&EndOpCodeHandle,
&EndLabel
);
if (EFI_ERROR (Status)) {
return Status;
}
//
// Ask user to select a MAC for this attempt.
//
NET_LIST_FOR_EACH (Entry, &mPrivate->NicInfoList) {
NicInfo = NET_LIST_USER_STRUCT (Entry, ISCSI_NIC_INFO, Link);
IScsiMacAddrToStr (
&NicInfo->PermanentAddress,
NicInfo->HwAddressSize,
NicInfo->VlanId,
MacString
);
UnicodeSPrint (mPrivate->PortString, (UINTN) ISCSI_NAME_IFR_MAX_SIZE, L"MAC %s", MacString);
PortTitleToken = HiiSetString (
mCallbackInfo->RegisteredHandle,
0,
mPrivate->PortString,
NULL
);
if (PortTitleToken == 0) {
Status = EFI_INVALID_PARAMETER;
goto Exit;
}
UnicodeSPrint (
mPrivate->PortString,
(UINTN) ISCSI_NAME_IFR_MAX_SIZE,
L"PFA: Bus %d | Dev %d | Func %d",
NicInfo->BusNumber,
NicInfo->DeviceNumber,
NicInfo->FunctionNumber
);
PortTitleHelpToken = HiiSetString (mCallbackInfo->RegisteredHandle, 0, mPrivate->PortString, NULL);
if (PortTitleHelpToken == 0) {
Status = EFI_INVALID_PARAMETER;
goto Exit;
}
HiiCreateGotoOpCode (
StartOpCodeHandle, // Container for dynamic created opcodes
FORMID_ATTEMPT_FORM,
PortTitleToken,
PortTitleHelpToken,
EFI_IFR_FLAG_CALLBACK, // Question flag
(UINT16) (KEY_MAC_ENTRY_BASE + NicInfo->NicIndex)
);
}
Status = HiiUpdateForm (
mCallbackInfo->RegisteredHandle, // HII handle
&gIScsiConfigGuid, // Formset GUID
FORMID_MAC_FORM, // Form ID
StartOpCodeHandle, // Label for where to insert opcodes
EndOpCodeHandle // Replace data
);
Exit:
HiiFreeOpCodeHandle (StartOpCodeHandle);
HiiFreeOpCodeHandle (EndOpCodeHandle);
return Status;
}
/**
Update the MAIN form to display the configured attempts.
**/
VOID
IScsiConfigUpdateAttempt (
VOID
)
{
CHAR16 AttemptName[ATTEMPT_NAME_MAX_SIZE];
LIST_ENTRY *Entry;
ISCSI_ATTEMPT_CONFIG_NVDATA *AttemptConfigData;
VOID *StartOpCodeHandle;
EFI_IFR_GUID_LABEL *StartLabel;
VOID *EndOpCodeHandle;
EFI_IFR_GUID_LABEL *EndLabel;
EFI_STATUS Status;
Status = IScsiCreateOpCode (
ATTEMPT_ENTRY_LABEL,
&StartOpCodeHandle,
&StartLabel,
&EndOpCodeHandle,
&EndLabel
);
if (EFI_ERROR (Status)) {
return ;
}
NET_LIST_FOR_EACH (Entry, &mPrivate->AttemptConfigs) {
AttemptConfigData = NET_LIST_USER_STRUCT (Entry, ISCSI_ATTEMPT_CONFIG_NVDATA, Link);
AsciiStrToUnicodeStrS (AttemptConfigData->AttemptName, AttemptName, ARRAY_SIZE (AttemptName));
UnicodeSPrint (mPrivate->PortString, (UINTN) 128, L"Attempt %s", AttemptName);
AttemptConfigData->AttemptTitleToken = HiiSetString (
mCallbackInfo->RegisteredHandle,
0,
mPrivate->PortString,
NULL
);
if (AttemptConfigData->AttemptTitleToken == 0) {
return ;
}
HiiCreateGotoOpCode (
StartOpCodeHandle, // Container for dynamic created opcodes
FORMID_ATTEMPT_FORM, // Form ID
AttemptConfigData->AttemptTitleToken, // Prompt text
AttemptConfigData->AttemptTitleHelpToken, // Help text
EFI_IFR_FLAG_CALLBACK, // Question flag
(UINT16) (KEY_ATTEMPT_ENTRY_BASE + AttemptConfigData->AttemptConfigIndex) // Question ID
);
}
HiiUpdateForm (
mCallbackInfo->RegisteredHandle, // HII handle
&gIScsiConfigGuid, // Formset GUID
FORMID_MAIN_FORM, // Form ID
StartOpCodeHandle, // Label for where to insert opcodes
EndOpCodeHandle // Replace data
);
HiiFreeOpCodeHandle (StartOpCodeHandle);
HiiFreeOpCodeHandle (EndOpCodeHandle);
}
/**
Callback function when user presses "Commit Changes and Exit" in Delete Attempts.
@param[in] IfrNvData The IFR NV data.
@retval EFI_NOT_FOUND Cannot find the corresponding variable.
@retval EFI_SUCCESS The operation is completed successfully.
@retval EFI_ABOTRED This operation is aborted cause of error
configuration.
@retval EFI_OUT_OF_RESOURCES Fail to finish the operation due to lack of
resources.
**/
EFI_STATUS
IScsiConfigDeleteAttempts (
IN ISCSI_CONFIG_IFR_NVDATA *IfrNvData
)
{
EFI_STATUS Status;
UINTN Index;
UINTN NewIndex;
ISCSI_ATTEMPT_CONFIG_NVDATA *AttemptConfigData;
UINT8 *AttemptConfigOrder;
UINTN AttemptConfigOrderSize;
UINT8 *AttemptNewOrder;
UINT32 Attribute;
UINTN Total;
UINTN NewTotal;
LIST_ENTRY *Entry;
LIST_ENTRY *NextEntry;
CHAR16 MacString[ISCSI_MAX_MAC_STRING_LEN];
AttemptConfigOrder = IScsiGetVariableAndSize (
L"AttemptOrder",
&gIScsiConfigGuid,
&AttemptConfigOrderSize
);
if ((AttemptConfigOrder == NULL) || (AttemptConfigOrderSize == 0)) {
return EFI_NOT_FOUND;
}
AttemptNewOrder = AllocateZeroPool (AttemptConfigOrderSize);
if (AttemptNewOrder == NULL) {
Status = EFI_OUT_OF_RESOURCES;
goto Error;
}
Total = AttemptConfigOrderSize / sizeof (UINT8);
NewTotal = Total;
Index = 0;
NET_LIST_FOR_EACH_SAFE (Entry, NextEntry, &mPrivate->AttemptConfigs) {
if (IfrNvData->DeleteAttemptList[Index] == 0) {
Index++;
continue;
}
//
// Delete the attempt.
//
AttemptConfigData = NET_LIST_USER_STRUCT (Entry, ISCSI_ATTEMPT_CONFIG_NVDATA, Link);
if (AttemptConfigData == NULL) {
Status = EFI_NOT_FOUND;
goto Error;
}
//
// Remove this attempt from UI configured attempt list.
//
RemoveEntryList (&AttemptConfigData->Link);
mPrivate->AttemptCount--;
if (AttemptConfigData->SessionConfigData.Enabled == ISCSI_ENABLED_FOR_MPIO) {
if (mPrivate->MpioCount < 1) {
Status = EFI_ABORTED;
goto Error;
}
//
// No more attempt is enabled for MPIO. Transit the iSCSI mode to single path.
//
if (--mPrivate->MpioCount == 0) {
mPrivate->EnableMpio = FALSE;
}
} else if (AttemptConfigData->SessionConfigData.Enabled == ISCSI_ENABLED) {
if (mPrivate->SinglePathCount < 1) {
Status = EFI_ABORTED;
goto Error;
}
mPrivate->SinglePathCount--;
}
AsciiStrToUnicodeStrS (AttemptConfigData->MacString, MacString, ARRAY_SIZE (MacString));
UnicodeSPrint (
mPrivate->PortString,
(UINTN) 128,
L"%s%d",
MacString,
(UINTN) AttemptConfigData->AttemptConfigIndex
);
gRT->SetVariable (
mPrivate->PortString,
&gEfiIScsiInitiatorNameProtocolGuid,
0,
0,
NULL
);
//
// Mark the attempt order in NVR to be deleted - 0.
//
for (NewIndex = 0; NewIndex < Total; NewIndex++) {
if (AttemptConfigOrder[NewIndex] == AttemptConfigData->AttemptConfigIndex) {
AttemptConfigOrder[NewIndex] = 0;
break;
}
}
NewTotal--;
FreePool (AttemptConfigData);
//
// Check next Attempt.
//
Index++;
}
//
// Construct AttemptNewOrder.
//
for (Index = 0, NewIndex = 0; Index < Total; Index++) {
if (AttemptConfigOrder[Index] != 0) {
AttemptNewOrder[NewIndex] = AttemptConfigOrder[Index];
NewIndex++;
}
}
Attribute = EFI_VARIABLE_BOOTSERVICE_ACCESS | EFI_VARIABLE_NON_VOLATILE;
//
// Update AttemptOrder in NVR.
//
Status = gRT->SetVariable (
L"AttemptOrder",
&gIScsiConfigGuid,
Attribute,
NewTotal * sizeof (UINT8),
AttemptNewOrder
);
Error:
if (AttemptConfigOrder != NULL) {
FreePool (AttemptConfigOrder);
}
if (AttemptNewOrder != NULL) {
FreePool (AttemptNewOrder);
}
return Status;
}
/**
Callback function when user presses "Delete Attempts".
@param[in] IfrNvData The IFR nv data.
@retval EFI_INVALID_PARAMETER Any parameter is invalid.
@retval EFI_BUFFER_TOO_SMALL The buffer in UpdateData is too small.
@retval EFI_SUCCESS The operation is completed successfully.
**/
EFI_STATUS
IScsiConfigDisplayDeleteAttempts (
IN ISCSI_CONFIG_IFR_NVDATA *IfrNvData
)
{
UINT8 *AttemptConfigOrder;
UINTN AttemptConfigOrderSize;
LIST_ENTRY *Entry;
ISCSI_ATTEMPT_CONFIG_NVDATA *AttemptConfigData;
UINT8 Index;
VOID *StartOpCodeHandle;
EFI_IFR_GUID_LABEL *StartLabel;
VOID *EndOpCodeHandle;
EFI_IFR_GUID_LABEL *EndLabel;
EFI_STATUS Status;
Status = IScsiCreateOpCode (
DELETE_ENTRY_LABEL,
&StartOpCodeHandle,
&StartLabel,
&EndOpCodeHandle,
&EndLabel
);
if (EFI_ERROR (Status)) {
return Status;
}
AttemptConfigOrder = IScsiGetVariableAndSize (
L"AttemptOrder",
&gIScsiConfigGuid,
&AttemptConfigOrderSize
);
if (AttemptConfigOrder != NULL) {
//
// Create the check box opcode to be deleted.
//
Index = 0;
NET_LIST_FOR_EACH (Entry, &mPrivate->AttemptConfigs) {
AttemptConfigData = NET_LIST_USER_STRUCT (Entry, ISCSI_ATTEMPT_CONFIG_NVDATA, Link);
IfrNvData->DeleteAttemptList[Index] = 0x00;
HiiCreateCheckBoxOpCode(
StartOpCodeHandle,
(EFI_QUESTION_ID) (ATTEMPT_DEL_QUESTION_ID + Index),
CONFIGURATION_VARSTORE_ID,
(UINT16) (ATTEMPT_DEL_VAR_OFFSET + Index),
AttemptConfigData->AttemptTitleToken,
AttemptConfigData->AttemptTitleHelpToken,
0,
0,
NULL
);
Index++;
if (Index == ISCSI_MAX_ATTEMPTS_NUM) {
break;
}
}
FreePool (AttemptConfigOrder);
}
Status = HiiUpdateForm (
mCallbackInfo->RegisteredHandle, // HII handle
&gIScsiConfigGuid, // Formset GUID
FORMID_DELETE_FORM, // Form ID
StartOpCodeHandle, // Label for where to insert opcodes
EndOpCodeHandle // Replace data
);
HiiFreeOpCodeHandle (StartOpCodeHandle);
HiiFreeOpCodeHandle (EndOpCodeHandle);
return Status;
}
/**
Callback function when user presses "Change Attempt Order".
@retval EFI_INVALID_PARAMETER Any parameter is invalid.
@retval EFI_OUT_OF_RESOURCES Does not have sufficient resources to finish this
operation.
@retval EFI_SUCCESS The operation is completed successfully.
**/
EFI_STATUS
IScsiConfigDisplayOrderAttempts (
VOID
)
{
EFI_STATUS Status;
UINT8 Index;
LIST_ENTRY *Entry;
ISCSI_ATTEMPT_CONFIG_NVDATA *AttemptConfigData;
VOID *StartOpCodeHandle;
EFI_IFR_GUID_LABEL *StartLabel;
VOID *EndOpCodeHandle;
EFI_IFR_GUID_LABEL *EndLabel;
VOID *OptionsOpCodeHandle;
Status = IScsiCreateOpCode (
ORDER_ENTRY_LABEL,
&StartOpCodeHandle,
&StartLabel,
&EndOpCodeHandle,
&EndLabel
);
if (EFI_ERROR (Status)) {
return Status;
}
ASSERT (StartOpCodeHandle != NULL);
OptionsOpCodeHandle = NULL;
//
// If no attempt to be ordered, update the original form and exit.
//
if (mPrivate->AttemptCount == 0) {
goto Exit;
}
//
// Create Option OpCode.
//
OptionsOpCodeHandle = HiiAllocateOpCodeHandle ();
if (OptionsOpCodeHandle == NULL) {
Status = EFI_OUT_OF_RESOURCES;
goto Error;
}
Index = 0;
NET_LIST_FOR_EACH (Entry, &mPrivate->AttemptConfigs) {
AttemptConfigData = NET_LIST_USER_STRUCT (Entry, ISCSI_ATTEMPT_CONFIG_NVDATA, Link);
HiiCreateOneOfOptionOpCode (
OptionsOpCodeHandle,
AttemptConfigData->AttemptTitleToken,
0,
EFI_IFR_NUMERIC_SIZE_1,
AttemptConfigData->AttemptConfigIndex
);
Index++;
}
ASSERT (Index == mPrivate->AttemptCount);
HiiCreateOrderedListOpCode (
StartOpCodeHandle, // Container for dynamic created opcodes
DYNAMIC_ORDERED_LIST_QUESTION_ID, // Question ID
CONFIGURATION_VARSTORE_ID, // VarStore ID
DYNAMIC_ORDERED_LIST_VAR_OFFSET, // Offset in Buffer Storage
STRING_TOKEN (STR_ORDER_ATTEMPT_ENTRY), // Question prompt text
STRING_TOKEN (STR_ORDER_ATTEMPT_ENTRY), // Question help text
0, // Question flag
EFI_IFR_UNIQUE_SET, // Ordered list flag, e.g. EFI_IFR_UNIQUE_SET
EFI_IFR_NUMERIC_SIZE_1, // Data type of Question value
ISCSI_MAX_ATTEMPTS_NUM, // Maximum container
OptionsOpCodeHandle, // Option Opcode list
NULL // Default Opcode is NULL
);
Exit:
Status = HiiUpdateForm (
mCallbackInfo->RegisteredHandle, // HII handle
&gIScsiConfigGuid, // Formset GUID
FORMID_ORDER_FORM, // Form ID
StartOpCodeHandle, // Label for where to insert opcodes
EndOpCodeHandle // Replace data
);
Error:
HiiFreeOpCodeHandle (StartOpCodeHandle);
HiiFreeOpCodeHandle (EndOpCodeHandle);
if (OptionsOpCodeHandle != NULL) {
HiiFreeOpCodeHandle (OptionsOpCodeHandle);
}
return Status;
}
/**
Callback function when user presses "Commit Changes and Exit" in Change Attempt Order.
@param[in] IfrNvData The IFR nv data.
@retval EFI_OUT_OF_RESOURCES Does not have sufficient resources to finish this
operation.
@retval EFI_NOT_FOUND Cannot find the corresponding variable.
@retval EFI_SUCCESS The operation is completed successfully.
**/
EFI_STATUS
IScsiConfigOrderAttempts (
IN ISCSI_CONFIG_IFR_NVDATA *IfrNvData
)
{
EFI_STATUS Status;
UINTN Index;
UINTN Indexj;
UINT8 AttemptConfigIndex;
ISCSI_ATTEMPT_CONFIG_NVDATA *AttemptConfigData;
UINT8 *AttemptConfigOrder;
UINT8 *AttemptConfigOrderTmp;
UINTN AttemptConfigOrderSize;
AttemptConfigOrder = IScsiGetVariableAndSize (
L"AttemptOrder",
&gIScsiConfigGuid,
&AttemptConfigOrderSize
);
if (AttemptConfigOrder == NULL) {
return EFI_NOT_FOUND;
}
AttemptConfigOrderTmp = AllocateZeroPool (AttemptConfigOrderSize);
if (AttemptConfigOrderTmp == NULL) {
Status = EFI_OUT_OF_RESOURCES;
goto Exit;
}
for (Index = 0; Index < ISCSI_MAX_ATTEMPTS_NUM; Index++) {
//
// The real content ends with 0.
//
if (IfrNvData->DynamicOrderedList[Index] == 0) {
break;
}
AttemptConfigIndex = IfrNvData->DynamicOrderedList[Index];
AttemptConfigData = IScsiConfigGetAttemptByConfigIndex (AttemptConfigIndex);
if (AttemptConfigData == NULL) {
Status = EFI_NOT_FOUND;
goto Exit;
}
//
// Reorder the Attempt List.
//
RemoveEntryList (&AttemptConfigData->Link);
InsertTailList (&mPrivate->AttemptConfigs, &AttemptConfigData->Link);
AttemptConfigOrderTmp[Index] = AttemptConfigIndex;
//
// Mark it to be deleted - 0.
//
for (Indexj = 0; Indexj < AttemptConfigOrderSize / sizeof (UINT8); Indexj++) {
if (AttemptConfigOrder[Indexj] == AttemptConfigIndex) {
AttemptConfigOrder[Indexj] = 0;
break;
}
}
}
//
// Adjust the attempt order in NVR.
//
for (; Index < AttemptConfigOrderSize / sizeof (UINT8); Index++) {
for (Indexj = 0; Indexj < AttemptConfigOrderSize / sizeof (UINT8); Indexj++) {
if (AttemptConfigOrder[Indexj] != 0) {
AttemptConfigOrderTmp[Index] = AttemptConfigOrder[Indexj];
AttemptConfigOrder[Indexj] = 0;
continue;
}
}
}
Status = gRT->SetVariable (
L"AttemptOrder",
&gIScsiConfigGuid,
EFI_VARIABLE_BOOTSERVICE_ACCESS | EFI_VARIABLE_NON_VOLATILE,
AttemptConfigOrderSize,
AttemptConfigOrderTmp
);
Exit:
if (AttemptConfigOrderTmp != NULL) {
FreePool (AttemptConfigOrderTmp);
}
FreePool (AttemptConfigOrder);
return Status;
}
/**
Callback function when a user presses "Attempt *" or when a user selects a NIC to
create the new attempt.
@param[in] KeyValue A unique value which is sent to the original
exporting driver so that it can identify the type
of data to expect.
@param[in] IfrNvData The IFR nv data.
@retval EFI_OUT_OF_RESOURCES Does not have sufficient resources to finish this
operation.
@retval EFI_NOT_FOUND Cannot find the corresponding variable.
@retval EFI_SUCCESS The operation is completed successfully.
**/
EFI_STATUS
IScsiConfigProcessDefault (
IN EFI_QUESTION_ID KeyValue,
IN ISCSI_CONFIG_IFR_NVDATA *IfrNvData
)
{
BOOLEAN NewAttempt;
ISCSI_ATTEMPT_CONFIG_NVDATA *AttemptConfigData;
ISCSI_SESSION_CONFIG_NVDATA *ConfigData;
UINT8 CurrentAttemptConfigIndex;
ISCSI_NIC_INFO *NicInfo;
UINT8 NicIndex;
CHAR16 MacString[ISCSI_MAX_MAC_STRING_LEN];
UINT8 *AttemptConfigOrder;
UINTN AttemptConfigOrderSize;
UINTN TotalNumber;
UINTN Index;
//
// Is User creating a new attempt?
//
NewAttempt = FALSE;
if ((KeyValue >= KEY_MAC_ENTRY_BASE) &&
(KeyValue <= (UINT16) (mPrivate->MaxNic + KEY_MAC_ENTRY_BASE))) {
//
// User has pressed "Add an Attempt" and then selects a NIC.
//
NewAttempt = TRUE;
} else if ((KeyValue >= KEY_ATTEMPT_ENTRY_BASE) &&
(KeyValue < (ISCSI_MAX_ATTEMPTS_NUM + KEY_ATTEMPT_ENTRY_BASE))) {
//
// User has pressed "Attempt *".
//
NewAttempt = FALSE;
} else {
//
// Don't process anything.
//
return EFI_SUCCESS;
}
//
// Free any attempt that is previously created but not saved to system.
//
if (mPrivate->NewAttempt != NULL) {
FreePool (mPrivate->NewAttempt);
mPrivate->NewAttempt = NULL;
}
if (NewAttempt) {
//
// Determine which NIC user has selected for the new created attempt.
//
NicIndex = (UINT8) (KeyValue - KEY_MAC_ENTRY_BASE);
NicInfo = IScsiGetNicInfoByIndex (NicIndex);
if (NicInfo == NULL) {
return EFI_NOT_FOUND;
}
//
// Create new attempt.
//
AttemptConfigData = AllocateZeroPool (sizeof (ISCSI_ATTEMPT_CONFIG_NVDATA));
if (AttemptConfigData == NULL) {
return EFI_OUT_OF_RESOURCES;
}
ConfigData = &AttemptConfigData->SessionConfigData;
ConfigData->TargetPort = ISCSI_WELL_KNOWN_PORT;
ConfigData->ConnectTimeout = CONNECT_DEFAULT_TIMEOUT;
ConfigData->ConnectRetryCount = CONNECT_MIN_RETRY;
AttemptConfigData->AuthenticationType = ISCSI_AUTH_TYPE_CHAP;
AttemptConfigData->AuthConfigData.CHAP.CHAPType = ISCSI_CHAP_UNI;
//
// Get current order number for this attempt.
//
AttemptConfigOrder = IScsiGetVariableAndSize (
L"AttemptOrder",
&gIScsiConfigGuid,
&AttemptConfigOrderSize
);
TotalNumber = AttemptConfigOrderSize / sizeof (UINT8);
if (AttemptConfigOrder == NULL) {
CurrentAttemptConfigIndex = 1;
} else {
//
// Get the max attempt config index.
//
CurrentAttemptConfigIndex = AttemptConfigOrder[0];
for (Index = 1; Index < TotalNumber; Index++) {
if (CurrentAttemptConfigIndex < AttemptConfigOrder[Index]) {
CurrentAttemptConfigIndex = AttemptConfigOrder[Index];
}
}
CurrentAttemptConfigIndex++;
}
TotalNumber++;
//
// Record the mapping between attempt order and attempt's configdata.
//
AttemptConfigData->AttemptConfigIndex = CurrentAttemptConfigIndex;
if (AttemptConfigOrder != NULL) {
FreePool (AttemptConfigOrder);
}
//
// Record the MAC info in Config Data.
//
IScsiMacAddrToStr (
&NicInfo->PermanentAddress,
NicInfo->HwAddressSize,
NicInfo->VlanId,
MacString
);
UnicodeStrToAsciiStrS (MacString, AttemptConfigData->MacString, sizeof (AttemptConfigData->MacString));
AttemptConfigData->NicIndex = NicIndex;
//
// Generate OUI-format ISID based on MAC address.
//
CopyMem (AttemptConfigData->SessionConfigData.IsId, &NicInfo->PermanentAddress, 6);
AttemptConfigData->SessionConfigData.IsId[0] =
(UINT8) (AttemptConfigData->SessionConfigData.IsId[0] & 0x3F);
//
// Add the help info for the new attempt.
//
UnicodeSPrint (
mPrivate->PortString,
(UINTN) ISCSI_NAME_IFR_MAX_SIZE,
L"MAC: %s, PFA: Bus %d | Dev %d | Func %d",
MacString,
NicInfo->BusNumber,
NicInfo->DeviceNumber,
NicInfo->FunctionNumber
);
AttemptConfigData->AttemptTitleHelpToken = HiiSetString (
mCallbackInfo->RegisteredHandle,
0,
mPrivate->PortString,
NULL
);
if (AttemptConfigData->AttemptTitleHelpToken == 0) {
FreePool (AttemptConfigData);
return EFI_INVALID_PARAMETER;
}
//
// Set the attempt name to default.
//
UnicodeSPrint (
mPrivate->PortString,
(UINTN) 128,
L"%d",
(UINTN) AttemptConfigData->AttemptConfigIndex
);
UnicodeStrToAsciiStrS (mPrivate->PortString, AttemptConfigData->AttemptName, sizeof (AttemptConfigData->AttemptName));
//
// Save the created Attempt temporarily. If user does not save the attempt
// by press 'KEY_SAVE_ATTEMPT_CONFIG' later, iSCSI driver would know that
// and free resources.
//
mPrivate->NewAttempt = (VOID *) AttemptConfigData;
} else {
//
// Determine which Attempt user has selected to configure.
// Get the attempt configuration data.
//
CurrentAttemptConfigIndex = (UINT8) (KeyValue - KEY_ATTEMPT_ENTRY_BASE);
AttemptConfigData = IScsiConfigGetAttemptByConfigIndex (CurrentAttemptConfigIndex);
if (AttemptConfigData == NULL) {
DEBUG ((DEBUG_ERROR, "Corresponding configuration data can not be retrieved!\n"));
return EFI_NOT_FOUND;
}
}
//
// Clear the old IFR data to avoid sharing it with other attempts.
//
if (IfrNvData->AuthenticationType == ISCSI_AUTH_TYPE_CHAP) {
ZeroMem (IfrNvData->CHAPName, sizeof (IfrNvData->CHAPName));
ZeroMem (IfrNvData->CHAPSecret, sizeof (IfrNvData->CHAPSecret));
ZeroMem (IfrNvData->ReverseCHAPName, sizeof (IfrNvData->ReverseCHAPName));
ZeroMem (IfrNvData->ReverseCHAPSecret, sizeof (IfrNvData->ReverseCHAPSecret));
}
IScsiConvertAttemptConfigDataToIfrNvData (AttemptConfigData, IfrNvData);
//
// Update current attempt to be a new created attempt or an existing attempt.
//
mCallbackInfo->Current = AttemptConfigData;
return EFI_SUCCESS;
}
/**
This function allows the caller to request the current
configuration for one or more named elements. The resulting
string is in format. Also, any and all alternative
configuration strings shall be appended to the end of the
current configuration string. If they are, they must appear
after the current configuration. They must contain the same
routing (GUID, NAME, PATH) as the current configuration string.
They must have an additional description indicating the type of
alternative configuration the string represents,
"ALTCFG=". That (when
converted from Hex UNICODE to binary) is a reference to a
string in the associated string pack.
@param[in] This Points to the EFI_HII_CONFIG_ACCESS_PROTOCOL.
@param[in] Request A null-terminated Unicode string in
format. Note that this
includes the routing information as well as
the configurable name / value pairs. It is
invalid for this string to be in
format.
@param[out] Progress On return, points to a character in the
Request string. Points to the string's null
terminator if request was successful. Points
to the most recent "&" before the first
failing name / value pair (or the beginning
of the string if the failure is in the first
name / value pair) if the request was not successful.
@param[out] Results A null-terminated Unicode string in
format which has all values
filled in for the names in the Request string.
String to be allocated by the called function.
@retval EFI_SUCCESS The Results string is filled with the
values corresponding to all requested
names.
@retval EFI_OUT_OF_RESOURCES Not enough memory to store the
parts of the results that must be
stored awaiting possible future
protocols.
@retval EFI_INVALID_PARAMETER For example, passing in a NULL
for the Request parameter
would result in this type of
error. In this case, the
Progress parameter would be
set to NULL.
@retval EFI_NOT_FOUND Routing data doesn't match any
known driver. Progress set to the
first character in the routing header.
Note: There is no requirement that the
driver validate the routing data. It
must skip the in order to
process the names.
@retval EFI_INVALID_PARAMETER Illegal syntax. Progress set
to most recent "&" before the
error or the beginning of the
string.
@retval EFI_INVALID_PARAMETER Unknown name. Progress points
to the & before the name in
question.
**/
EFI_STATUS
EFIAPI
IScsiFormExtractConfig (
IN CONST EFI_HII_CONFIG_ACCESS_PROTOCOL *This,
IN CONST EFI_STRING Request,
OUT EFI_STRING *Progress,
OUT EFI_STRING *Results
)
{
EFI_STATUS Status;
CHAR8 *InitiatorName;
UINTN BufferSize;
ISCSI_CONFIG_IFR_NVDATA *IfrNvData;
ISCSI_FORM_CALLBACK_INFO *Private;
EFI_STRING ConfigRequestHdr;
EFI_STRING ConfigRequest;
BOOLEAN AllocatedRequest;
UINTN Size;
if (This == NULL || Progress == NULL || Results == NULL) {
return EFI_INVALID_PARAMETER;
}
*Progress = Request;
if ((Request != NULL) && !HiiIsConfigHdrMatch (Request, &gIScsiConfigGuid, mVendorStorageName)) {
return EFI_NOT_FOUND;
}
ConfigRequestHdr = NULL;
ConfigRequest = NULL;
AllocatedRequest = FALSE;
Size = 0;
Private = ISCSI_FORM_CALLBACK_INFO_FROM_FORM_CALLBACK (This);
IfrNvData = AllocateZeroPool (sizeof (ISCSI_CONFIG_IFR_NVDATA));
if (IfrNvData == NULL) {
return EFI_OUT_OF_RESOURCES;
}
if (Private->Current != NULL) {
IScsiConvertAttemptConfigDataToIfrNvData (Private->Current, IfrNvData);
}
BufferSize = ISCSI_NAME_MAX_SIZE;
InitiatorName = (CHAR8 *) AllocateZeroPool (BufferSize);
if (InitiatorName == NULL) {
FreePool (IfrNvData);
return EFI_OUT_OF_RESOURCES;
}
Status = gIScsiInitiatorName.Get (&gIScsiInitiatorName, &BufferSize, InitiatorName);
if (EFI_ERROR (Status)) {
IfrNvData->InitiatorName[0] = L'\0';
} else {
AsciiStrToUnicodeStrS (
InitiatorName,
IfrNvData->InitiatorName,
sizeof (IfrNvData->InitiatorName) / sizeof (IfrNvData->InitiatorName[0])
);
}
//
// Convert buffer data to by helper function BlockToConfig().
//
BufferSize = sizeof (ISCSI_CONFIG_IFR_NVDATA);
ConfigRequest = Request;
if ((Request == NULL) || (StrStr (Request, L"OFFSET") == NULL)) {
//
// Request has no request element, construct full request string.
// Allocate and fill a buffer large enough to hold the template
// followed by "&OFFSET=0&WIDTH=WWWWWWWWWWWWWWWW" followed by a Null-terminator
//
ConfigRequestHdr = HiiConstructConfigHdr (&gIScsiConfigGuid, mVendorStorageName, Private->DriverHandle);
Size = (StrLen (ConfigRequestHdr) + 32 + 1) * sizeof (CHAR16);
ConfigRequest = AllocateZeroPool (Size);
if (ConfigRequest == NULL) {
FreePool (IfrNvData);
FreePool (InitiatorName);
return EFI_OUT_OF_RESOURCES;
}
AllocatedRequest = TRUE;
UnicodeSPrint (ConfigRequest, Size, L"%s&OFFSET=0&WIDTH=%016LX", ConfigRequestHdr, (UINT64)BufferSize);
FreePool (ConfigRequestHdr);
}
Status = gHiiConfigRouting->BlockToConfig (
gHiiConfigRouting,
ConfigRequest,
(UINT8 *) IfrNvData,
BufferSize,
Results,
Progress
);
FreePool (IfrNvData);
FreePool (InitiatorName);
//
// Free the allocated config request string.
//
if (AllocatedRequest) {
FreePool (ConfigRequest);
ConfigRequest = NULL;
}
//
// Set Progress string to the original request string.
//
if (Request == NULL) {
*Progress = NULL;
} else if (StrStr (Request, L"OFFSET") == NULL) {
*Progress = Request + StrLen (Request);
}
return Status;
}
/**
This function applies changes in a driver's configuration.
Input is a Configuration, which has the routing data for this
driver followed by name / value configuration pairs. The driver
must apply those pairs to its configurable storage. If the
driver's configuration is stored in a linear block of data
and the driver's name / value pairs are in
format, it may use the ConfigToBlock helper function (above) to
simplify the job.
@param[in] This Points to the EFI_HII_CONFIG_ACCESS_PROTOCOL.
@param[in] Configuration A null-terminated Unicode string in
format.
@param[out] Progress A pointer to a string filled in with the
offset of the most recent '&' before the
first failing name / value pair (or the
beginning of the string if the failure
is in the first name / value pair) or
the terminating NULL if all was
successful.
@retval EFI_SUCCESS The results have been distributed or are
awaiting distribution.
@retval EFI_OUT_OF_RESOURCES Not enough memory to store the
parts of the results that must be
stored awaiting possible future
protocols.
@retval EFI_INVALID_PARAMETERS Passing in a NULL for the
Results parameter would result
in this type of error.
@retval EFI_NOT_FOUND Target for the specified routing data
was not found.
**/
EFI_STATUS
EFIAPI
IScsiFormRouteConfig (
IN CONST EFI_HII_CONFIG_ACCESS_PROTOCOL *This,
IN CONST EFI_STRING Configuration,
OUT EFI_STRING *Progress
)
{
if (This == NULL || Configuration == NULL || Progress == NULL) {
return EFI_INVALID_PARAMETER;
}
//
// Check routing data in .
// Note: if only one Storage is used, then this checking could be skipped.
//
if (!HiiIsConfigHdrMatch (Configuration, &gIScsiConfigGuid, mVendorStorageName)) {
*Progress = Configuration;
return EFI_NOT_FOUND;
}
*Progress = Configuration + StrLen (Configuration);
return EFI_SUCCESS;
}
/**
This function is called to provide results data to the driver.
This data consists of a unique key that is used to identify
which data is either being passed back or being asked for.
@param[in] This Points to the EFI_HII_CONFIG_ACCESS_PROTOCOL.
@param[in] Action Specifies the type of action taken by the browser.
@param[in] QuestionId A unique value which is sent to the original
exporting driver so that it can identify the type
of data to expect. The format of the data tends to
vary based on the opcode that generated the callback.
@param[in] Type The type of value for the question.
@param[in, out] Value A pointer to the data being sent to the original
exporting driver.
@param[out] ActionRequest On return, points to the action requested by the
callback function.
@retval EFI_SUCCESS The callback successfully handled the action.
@retval EFI_OUT_OF_RESOURCES Not enough storage is available to hold the
variable and its data.
@retval EFI_DEVICE_ERROR The variable could not be saved.
@retval EFI_UNSUPPORTED The specified Action is not supported by the
callback.
**/
EFI_STATUS
EFIAPI
IScsiFormCallback (
IN CONST EFI_HII_CONFIG_ACCESS_PROTOCOL *This,
IN EFI_BROWSER_ACTION Action,
IN EFI_QUESTION_ID QuestionId,
IN UINT8 Type,
IN OUT EFI_IFR_TYPE_VALUE *Value,
OUT EFI_BROWSER_ACTION_REQUEST *ActionRequest
)
{
ISCSI_FORM_CALLBACK_INFO *Private;
UINTN BufferSize;
CHAR8 *IScsiName;
CHAR8 IpString[ISCSI_NAME_MAX_SIZE];
CHAR8 LunString[ISCSI_LUN_STR_MAX_LEN];
UINT64 Lun;
EFI_IP_ADDRESS HostIp;
EFI_IP_ADDRESS SubnetMask;
EFI_IP_ADDRESS Gateway;
ISCSI_CONFIG_IFR_NVDATA *IfrNvData;
ISCSI_CONFIG_IFR_NVDATA OldIfrNvData;
EFI_STATUS Status;
CHAR16 AttemptName[ATTEMPT_NAME_SIZE + 4];
EFI_INPUT_KEY Key;
if ((Action == EFI_BROWSER_ACTION_FORM_OPEN) || (Action == EFI_BROWSER_ACTION_FORM_CLOSE)) {
//
// Do nothing for UEFI OPEN/CLOSE Action
//
return EFI_SUCCESS;
}
if ((Action != EFI_BROWSER_ACTION_CHANGING) && (Action != EFI_BROWSER_ACTION_CHANGED)) {
//
// All other type return unsupported.
//
return EFI_UNSUPPORTED;
}
if ((Value == NULL) || (ActionRequest == NULL)) {
return EFI_INVALID_PARAMETER;
}
Private = ISCSI_FORM_CALLBACK_INFO_FROM_FORM_CALLBACK (This);
//
// Retrieve uncommitted data from Browser
//
BufferSize = sizeof (ISCSI_CONFIG_IFR_NVDATA);
IfrNvData = AllocateZeroPool (BufferSize);
if (IfrNvData == NULL) {
return EFI_OUT_OF_RESOURCES;
}
IScsiName = (CHAR8 *) AllocateZeroPool (ISCSI_NAME_MAX_SIZE);
if (IScsiName == NULL) {
FreePool (IfrNvData);
return EFI_OUT_OF_RESOURCES;
}
Status = EFI_SUCCESS;
ZeroMem (&OldIfrNvData, BufferSize);
HiiGetBrowserData (NULL, NULL, BufferSize, (UINT8 *) IfrNvData);
CopyMem (&OldIfrNvData, IfrNvData, BufferSize);
if (Action == EFI_BROWSER_ACTION_CHANGING) {
switch (QuestionId) {
case KEY_ADD_ATTEMPT:
//
// Check whether iSCSI initiator name is configured already.
//
mPrivate->InitiatorNameLength = ISCSI_NAME_MAX_SIZE;
Status = gIScsiInitiatorName.Get (
&gIScsiInitiatorName,
&mPrivate->InitiatorNameLength,
mPrivate->InitiatorName
);
if (EFI_ERROR (Status)) {
CreatePopUp (
EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
&Key,
L"Error: please configure iSCSI initiator name first!",
NULL
);
break;
}
Status = IScsiConfigAddAttempt ();
break;
case KEY_DELETE_ATTEMPT:
CopyMem (
OldIfrNvData.DeleteAttemptList,
IfrNvData->DeleteAttemptList,
sizeof (IfrNvData->DeleteAttemptList)
);
Status = IScsiConfigDisplayDeleteAttempts (IfrNvData);
break;
case KEY_ORDER_ATTEMPT_CONFIG:
//
// Order the attempt according to user input.
//
CopyMem (
OldIfrNvData.DynamicOrderedList,
IfrNvData->DynamicOrderedList,
sizeof (IfrNvData->DynamicOrderedList)
);
IScsiConfigDisplayOrderAttempts ();
break;
default:
Status = IScsiConfigProcessDefault (QuestionId, IfrNvData);
break;
}
} else if (Action == EFI_BROWSER_ACTION_CHANGED) {
switch (QuestionId) {
case KEY_INITIATOR_NAME:
UnicodeStrToAsciiStrS (IfrNvData->InitiatorName, IScsiName, ISCSI_NAME_MAX_SIZE);
BufferSize = AsciiStrSize (IScsiName);
Status = gIScsiInitiatorName.Set (&gIScsiInitiatorName, &BufferSize, IScsiName);
if (EFI_ERROR (Status)) {
CreatePopUp (
EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
&Key,
L"Invalid iSCSI Name!",
NULL
);
}
*ActionRequest = EFI_BROWSER_ACTION_REQUEST_FORM_APPLY;
break;
case KEY_ATTEMPT_NAME:
if (StrLen (IfrNvData->AttemptName) > ATTEMPT_NAME_SIZE) {
CopyMem (AttemptName, IfrNvData->AttemptName, ATTEMPT_NAME_SIZE * sizeof (CHAR16));
CopyMem (&AttemptName[ATTEMPT_NAME_SIZE], L"...", 4 * sizeof (CHAR16));
} else {
CopyMem (
AttemptName,
IfrNvData->AttemptName,
(StrLen (IfrNvData->AttemptName) + 1) * sizeof (CHAR16)
);
}
UnicodeStrToAsciiStrS (IfrNvData->AttemptName, Private->Current->AttemptName, sizeof (Private->Current->AttemptName));
IScsiConfigUpdateAttempt ();
*ActionRequest = EFI_BROWSER_ACTION_REQUEST_FORM_APPLY;
break;
case KEY_SAVE_ATTEMPT_CONFIG:
Status = IScsiConvertIfrNvDataToAttemptConfigData (IfrNvData, Private->Current);
if (EFI_ERROR (Status)) {
break;
}
*ActionRequest = EFI_BROWSER_ACTION_REQUEST_FORM_APPLY;
break;
case KEY_SAVE_ORDER_CHANGES:
//
// Sync the Attempt Order to NVR.
//
Status = IScsiConfigOrderAttempts (IfrNvData);
if (EFI_ERROR (Status)) {
break;
}
IScsiConfigUpdateAttempt ();
*ActionRequest = EFI_BROWSER_ACTION_REQUEST_FORM_SUBMIT_EXIT;
break;
case KEY_IGNORE_ORDER_CHANGES:
CopyMem (
IfrNvData->DynamicOrderedList,
OldIfrNvData.DynamicOrderedList,
sizeof (IfrNvData->DynamicOrderedList)
);
*ActionRequest = EFI_BROWSER_ACTION_REQUEST_FORM_DISCARD_EXIT;
break;
case KEY_SAVE_DELETE_ATTEMPT:
//
// Delete the Attempt Order from NVR
//
Status = IScsiConfigDeleteAttempts (IfrNvData);
if (EFI_ERROR (Status)) {
break;
}
IScsiConfigUpdateAttempt ();
*ActionRequest = EFI_BROWSER_ACTION_REQUEST_FORM_SUBMIT_EXIT;
break;
case KEY_IGNORE_DELETE_ATTEMPT:
CopyMem (
IfrNvData->DeleteAttemptList,
OldIfrNvData.DeleteAttemptList,
sizeof (IfrNvData->DeleteAttemptList)
);
*ActionRequest = EFI_BROWSER_ACTION_REQUEST_FORM_DISCARD_EXIT;
break;
case KEY_IP_MODE:
switch (Value->u8) {
case IP_MODE_IP6:
case IP_MODE_IP4:
ZeroMem (IfrNvData->TargetIp, sizeof (IfrNvData->TargetIp));
Private->Current->AutoConfigureMode = 0;
break;
}
break;
case KEY_LOCAL_IP:
Status = NetLibStrToIp4 (IfrNvData->LocalIp, &HostIp.v4);
if (EFI_ERROR (Status) ||
((Private->Current->SessionConfigData.SubnetMask.Addr[0] != 0) &&
!NetIp4IsUnicast (NTOHL (HostIp.Addr[0]), NTOHL(*(UINT32*)Private->Current->SessionConfigData.SubnetMask.Addr)))) {
CreatePopUp (
EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
&Key,
L"Invalid IP address!",
NULL
);
Status = EFI_INVALID_PARAMETER;
} else {
CopyMem (&Private->Current->SessionConfigData.LocalIp, &HostIp.v4, sizeof (HostIp.v4));
}
break;
case KEY_SUBNET_MASK:
Status = NetLibStrToIp4 (IfrNvData->SubnetMask, &SubnetMask.v4);
if (EFI_ERROR (Status) || ((SubnetMask.Addr[0] != 0) && (IScsiGetSubnetMaskPrefixLength (&SubnetMask.v4) == 0))) {
CreatePopUp (
EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
&Key,
L"Invalid Subnet Mask!",
NULL
);
Status = EFI_INVALID_PARAMETER;
} else {
CopyMem (&Private->Current->SessionConfigData.SubnetMask, &SubnetMask.v4, sizeof (SubnetMask.v4));
}
break;
case KEY_GATE_WAY:
Status = NetLibStrToIp4 (IfrNvData->Gateway, &Gateway.v4);
if (EFI_ERROR (Status) ||
((Gateway.Addr[0] != 0) &&
(Private->Current->SessionConfigData.SubnetMask.Addr[0] != 0) &&
!NetIp4IsUnicast (NTOHL (Gateway.Addr[0]), NTOHL(*(UINT32*)Private->Current->SessionConfigData.SubnetMask.Addr)))) {
CreatePopUp (
EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
&Key,
L"Invalid Gateway!",
NULL
);
Status = EFI_INVALID_PARAMETER;
} else {
CopyMem (&Private->Current->SessionConfigData.Gateway, &Gateway.v4, sizeof (Gateway.v4));
}
break;
case KEY_TARGET_IP:
UnicodeStrToAsciiStrS (IfrNvData->TargetIp, IpString, sizeof (IpString));
Status = IScsiAsciiStrToIp (IpString, IfrNvData->IpMode, &HostIp);
if (EFI_ERROR (Status) || !IpIsUnicast (&HostIp, IfrNvData->IpMode)) {
//
// The target is expressed in URL format or an invalid Ip address, just save.
//
Private->Current->SessionConfigData.DnsMode = TRUE;
ZeroMem (&Private->Current->SessionConfigData.TargetIp, sizeof (Private->Current->SessionConfigData.TargetIp));
UnicodeStrToAsciiStrS (IfrNvData->TargetIp, Private->Current->SessionConfigData.TargetUrl, ISCSI_NAME_MAX_SIZE);
} else {
Private->Current->SessionConfigData.DnsMode = FALSE;
CopyMem (&Private->Current->SessionConfigData.TargetIp, &HostIp, sizeof (HostIp));
}
break;
case KEY_TARGET_NAME:
UnicodeStrToAsciiStrS (IfrNvData->TargetName, IScsiName, ISCSI_NAME_MAX_SIZE);
Status = IScsiNormalizeName (IScsiName, AsciiStrLen (IScsiName));
if (EFI_ERROR (Status)) {
CreatePopUp (
EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
&Key,
L"Invalid iSCSI Name!",
NULL
);
} else {
AsciiStrCpyS (Private->Current->SessionConfigData.TargetName, ISCSI_NAME_MAX_SIZE, IScsiName);
}
break;
case KEY_DHCP_ENABLE:
if (IfrNvData->InitiatorInfoFromDhcp == 0) {
IfrNvData->TargetInfoFromDhcp = 0;
}
break;
case KEY_BOOT_LUN:
UnicodeStrToAsciiStrS (IfrNvData->BootLun, LunString, sizeof (LunString));
Status = IScsiAsciiStrToLun (LunString, (UINT8 *) &Lun);
if (EFI_ERROR (Status)) {
CreatePopUp (
EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
&Key,
L"Invalid LUN string!",
NULL
);
} else {
CopyMem (Private->Current->SessionConfigData.BootLun, &Lun, sizeof (Lun));
}
break;
case KEY_AUTH_TYPE:
switch (Value->u8) {
case ISCSI_AUTH_TYPE_CHAP:
IfrNvData->CHAPType = ISCSI_CHAP_UNI;
break;
default:
break;
}
break;
case KEY_CHAP_NAME:
UnicodeStrToAsciiStrS (
IfrNvData->CHAPName,
Private->Current->AuthConfigData.CHAP.CHAPName,
sizeof (Private->Current->AuthConfigData.CHAP.CHAPName)
);
break;
case KEY_CHAP_SECRET:
UnicodeStrToAsciiStrS (
IfrNvData->CHAPSecret,
Private->Current->AuthConfigData.CHAP.CHAPSecret,
sizeof (Private->Current->AuthConfigData.CHAP.CHAPSecret)
);
break;
case KEY_REVERSE_CHAP_NAME:
UnicodeStrToAsciiStrS (
IfrNvData->ReverseCHAPName,
Private->Current->AuthConfigData.CHAP.ReverseCHAPName,
sizeof (Private->Current->AuthConfigData.CHAP.ReverseCHAPName)
);
break;
case KEY_REVERSE_CHAP_SECRET:
UnicodeStrToAsciiStrS (
IfrNvData->ReverseCHAPSecret,
Private->Current->AuthConfigData.CHAP.ReverseCHAPSecret,
sizeof (Private->Current->AuthConfigData.CHAP.ReverseCHAPSecret)
);
break;
case KEY_CONFIG_ISID:
IScsiParseIsIdFromString (IfrNvData->IsId, Private->Current->SessionConfigData.IsId);
IScsiConvertIsIdToString (IfrNvData->IsId, Private->Current->SessionConfigData.IsId);
break;
default:
break;
}
}
if (!EFI_ERROR (Status)) {
//
// Pass changed uncommitted data back to Form Browser.
//
BufferSize = sizeof (ISCSI_CONFIG_IFR_NVDATA);
HiiSetBrowserData (NULL, NULL, BufferSize, (UINT8 *) IfrNvData, NULL);
}
FreePool (IfrNvData);
FreePool (IScsiName);
return Status;
}
/**
Initialize the iSCSI configuration form.
@param[in] DriverBindingHandle The iSCSI driverbinding handle.
@retval EFI_SUCCESS The iSCSI configuration form is initialized.
@retval EFI_OUT_OF_RESOURCES Failed to allocate memory.
**/
EFI_STATUS
IScsiConfigFormInit (
IN EFI_HANDLE DriverBindingHandle
)
{
EFI_STATUS Status;
ISCSI_FORM_CALLBACK_INFO *CallbackInfo;
CallbackInfo = (ISCSI_FORM_CALLBACK_INFO *) AllocateZeroPool (sizeof (ISCSI_FORM_CALLBACK_INFO));
if (CallbackInfo == NULL) {
return EFI_OUT_OF_RESOURCES;
}
CallbackInfo->Signature = ISCSI_FORM_CALLBACK_INFO_SIGNATURE;
CallbackInfo->Current = NULL;
CallbackInfo->ConfigAccess.ExtractConfig = IScsiFormExtractConfig;
CallbackInfo->ConfigAccess.RouteConfig = IScsiFormRouteConfig;
CallbackInfo->ConfigAccess.Callback = IScsiFormCallback;
//
// Install Device Path Protocol and Config Access protocol to driver handle.
//
Status = gBS->InstallMultipleProtocolInterfaces (
&CallbackInfo->DriverHandle,
&gEfiDevicePathProtocolGuid,
&mIScsiHiiVendorDevicePath,
&gEfiHiiConfigAccessProtocolGuid,
&CallbackInfo->ConfigAccess,
NULL
);
ASSERT_EFI_ERROR (Status);
//
// Publish our HII data.
//
CallbackInfo->RegisteredHandle = HiiAddPackages (
&gIScsiConfigGuid,
CallbackInfo->DriverHandle,
IScsiDxeStrings,
IScsiConfigVfrBin,
NULL
);
if (CallbackInfo->RegisteredHandle == NULL) {
gBS->UninstallMultipleProtocolInterfaces (
&CallbackInfo->DriverHandle,
&gEfiDevicePathProtocolGuid,
&mIScsiHiiVendorDevicePath,
&gEfiHiiConfigAccessProtocolGuid,
&CallbackInfo->ConfigAccess,
NULL
);
FreePool(CallbackInfo);
return EFI_OUT_OF_RESOURCES;
}
mCallbackInfo = CallbackInfo;
return EFI_SUCCESS;
}
/**
Unload the iSCSI configuration form, this includes: delete all the iSCSI
configuration entries, uninstall the form callback protocol, and
free the resources used.
@param[in] DriverBindingHandle The iSCSI driverbinding handle.
@retval EFI_SUCCESS The iSCSI configuration form is unloaded.
@retval Others Failed to unload the form.
**/
EFI_STATUS
IScsiConfigFormUnload (
IN EFI_HANDLE DriverBindingHandle
)
{
ISCSI_ATTEMPT_CONFIG_NVDATA *AttemptConfigData;
ISCSI_NIC_INFO *NicInfo;
LIST_ENTRY *Entry;
EFI_STATUS Status;
while (!IsListEmpty (&mPrivate->AttemptConfigs)) {
Entry = NetListRemoveHead (&mPrivate->AttemptConfigs);
AttemptConfigData = NET_LIST_USER_STRUCT (Entry, ISCSI_ATTEMPT_CONFIG_NVDATA, Link);
FreePool (AttemptConfigData);
mPrivate->AttemptCount--;
}
ASSERT (mPrivate->AttemptCount == 0);
while (!IsListEmpty (&mPrivate->NicInfoList)) {
Entry = NetListRemoveHead (&mPrivate->NicInfoList);
NicInfo = NET_LIST_USER_STRUCT (Entry, ISCSI_NIC_INFO, Link);
FreePool (NicInfo);
mPrivate->NicCount--;
}
ASSERT (mPrivate->NicCount == 0);
//
// Free attempt is created but not saved to system.
//
if (mPrivate->NewAttempt != NULL) {
FreePool (mPrivate->NewAttempt);
}
FreePool (mPrivate);
mPrivate = NULL;
//
// Remove HII package list.
//
HiiRemovePackages (mCallbackInfo->RegisteredHandle);
//
// Uninstall Device Path Protocol and Config Access protocol.
//
Status = gBS->UninstallMultipleProtocolInterfaces (
mCallbackInfo->DriverHandle,
&gEfiDevicePathProtocolGuid,
&mIScsiHiiVendorDevicePath,
&gEfiHiiConfigAccessProtocolGuid,
&mCallbackInfo->ConfigAccess,
NULL
);
FreePool (mCallbackInfo);
return Status;
}