// /**
//
// Copyright (c) 2013 Hewlett-Packard Development Company, L.P.
// Copyright (c) 2010 - 2011, Intel Corporation. All rights reserved. <BR>
// This program and the accompanying materials
// are licensed and made available under the terms and conditions of the BSD License
// which accompanies this distribution. The full text of the license may be found at
// http://opensource.org/licenses/bsd-license.php
//
// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
//
// Module Name:
//
// UefiShellNetwork1CommandsLib.uni
//
// Abstract:
//
// String definitions for UEFI Shell 2.0 network 1 commands
//
//
// **/

/=#

#langdef   en-US "en-US"

#string STR_GEN_TOO_MANY          #language en-US "%EError. %NToo many arguments specified.\r\n"
#string STR_GEN_TOO_FEW           #language en-US "%EError. %NToo few arguments specified.\r\n"
#string STR_GEN_PARAM_INV         #language en-US "%EError. %NIncorrect parameter.\r\n"
#string STR_GEN_PROBLEM           #language en-US "%EError. %NThe argument '%B%s%N' is incorrect.\r\n"
#string STR_GEN_PROBLEM_OP2       #language en-US "%EError. %NThe argument '%B%s%N' is incorrect.  Expected '%B%s%N' or '%B%s%N'.\r\n"
#string STR_GEN_PROBLEM_VAL       #language en-US "%EError. %NThe argument '%B%s%N' has incorrect value.\r\n"
#string STR_GEN_NO_VALUE          #language en-US "%EError. %NThe argument '%B%s%N' requires a value.\r\n"
#string STR_GEN_ERR_AD            #language en-US "%EError. %NAccess denied.\r\n"
#string STR_GEN_ERR_UK            #language en-US "%EError: %r\r\n"
#string STR_GEN_PARAM_CON         #language en-US "%EError. %NParameters conflict\r\n"
#string STR_GEN_FILE_OPEN_FAIL    #language en-US "%EError. %NThe file '%B%s%N' did not open.\r\n"
#string STR_GEN_FILE_AD           #language en-US "%EError. %NAccess denied to file '%B%s%N'.\r\n"
#string STR_GEN_CRLF              #language en-US "\r\n"
#string STR_GEN_NO_FILES          #language en-US "No matching files were found.\r\n"
#string STR_GEN_DIR_NF            #language en-US "Directory '%B%s%N' was not found.\r\n"
#string STR_GEN_FILE_NF           #language en-US "File '%B%s%N' was not found.\r\n"
#string STR_GEN_FILE_NO_OPEN      #language en-US "%EError. %N The file '%B%s%N' wouldn't open: %r.\r\n"
#string STR_GEN_IS_DIR            #language en-US "'%B%s%N' is a directory.\r\n"
#string STR_GEN_PROTOCOL_NF       #language en-US "%EError. %NThe protocol '%B%s%N' was required and not found (%g).\r\n"

#string STR_PING_CONFIG           #language en-US "Config %r\r\n"
#string STR_PING_GETMODE          #language en-US "GetModeData %r\r\n"
#string STR_PING_GETDATA          #language en-US "GetData %r\r\n"
#string STR_PING_SEND_REQUEST     #language en-US "Echo request sequence %d did not complete successfully.\r\n"
#string STR_PING_NOSOURCE_INDO    #language en-US "There are no sources in %s's multicast domain.\r\n"
#string STR_PING_NETWORK_ERROR    #language en-US "%EError.%N Network function failed with %r.\r\n"
#string STR_PING_NOROUTE_FOUND    #language en-US "There is no route to the destination '%B%s%N' from the source '%B%s%N' was found.\r\n"
#string STR_PING_START            #language en-US "Ping %s %d data bytes\r\n"
#string STR_PING_TIMEOUT          #language en-US "Echo request sequence %d timeout.\r\n"
#string STR_PING_REPLY_INFO       #language en-US "%d bytes from %s : icmp_seq=%d ttl=%d time%c%dms\r\n"
#string STR_PING_STAT             #language en-US "\n%d packets transmitted, %d received, %d%% packet loss, time %dms\r\n"
#string STR_PING_RTT              #language en-US "\nRtt(round trip time) min=%dms max=%dms avg=%dms\r\n"
#string STR_GET_HELP_PING         #language en-US ""
".TH ping 0 "ping another IP address"\r\n"
".SH NAME\r\n"
"Ping the target host with IPv4 stack.\r\n"
".SH SYNOPSIS\r\n"
"Ping [-_s SourceIp] [-n count] [-l size] TargetIp\r\n"
".SH OPTIONS\r\n"
"-n         Number of echo request datagram to be sent.\r\n"
"-l         Size of data buffer in echo request datagram.\r\n"
"TargetIp   IPv4 address of the target machine.\r\n"
"-_s        Specify the source adapter as IPv4 address.\r\n"
".SH DESCRIPTION\r\n"
"This command uses the ICMPv4 ECHO_REQUEST datagram to elicit ECHO_REPLY from a host.\r\n"
".SH EXAMPLES\r\n"
"To ping the target host with 64 bytes data:\r\n"
"fs0:\> ping -l 64 192.168.0.1\r\n"
"To ping the target host by sending 20 echo request datagram:\r\n"
"fs0:\> ping -n 20 202.120.100.1\r\n"
".SH RETURNVALUES\r\n"
"SHELL_SUCCESS              The action was completed as requested.\r\n"
"SHELL_INVALID_PARAMETER    One of the passed in parameters was incorrectly formatted or its value was out of bounds.\r\n"

#string STR_IFCONFIG_GET_NIC_FAIL         #language en-US  "%HIfConfig%N: Unable to retrieve all NICs' configure data, %r\n"
#string STR_IFCONFIG_INTERFACE_NOT_FOUND  #language en-US  "%HIfConfig%N: The specified interface %H%s%N doesn't exist, use IfConfig -l to list the interfaces\n"
#string STR_IFCONFIG_INTERFACE_CONFIGURED #language en-US  "%HIfConfig%N: Interface %H%s%N is already configured as DHCP, clean the configuration first\n"
#string STR_IFCONFIG_INVALID_IP_STR       #language en-US  "%HIfConfig%N: Invalid IP address, %s\n"
#string STR_IFCONFIG_INVALID_ADDR_PAIR    #language en-US  "%HIfConfig%N: The IP/netmask pair are incorrect\n"
#string STR_IFCONFIG_INVALID_GATEWAY      #language en-US  "%HIfConfig%N: Invalid gateway address\n"
#string STR_IFCONFIG_SET_FAIL             #language en-US  "%HIfConfig%N: Unable to set the NIC configure parameters, %r\n"
#string STR_IFCONFIG_START_SET_ADDR       #language en-US  "Create an IP and start to get the default address\n"
#string STR_IFCONFIG_IP_CHILD_FAIL        #language en-US  "%HIfConfig%N: Unable to create an IP child to start auto-config, %r\n"
#string STR_IFCONFIG_WAIT_SET_DONE        #language en-US  "Please wait, your console may stop responding for a while ...\n"
#string STR_IFCONFIG_GET_DEF_ADDR_FAIL    #language en-US  "Unable to get default IP\n"
#string STR_IFCONFIG_NIC_NAME             #language en-US  "%s\n"
#string STR_IFCONFIG_NIC_NOT_CONFIGURED   #language en-US  "  Not configured.\n"
#string STR_IFCONFIG_CONFIG_SOURCE        #language en-US  "  Source     : %s\n"
#string STR_IFCONFIG_PERMANENT_STATUS     #language en-US  "  Permanent  : %s\n"
#string STR_IFCONFIG_ROUTES_SIZE          #language en-US  "  Routes (%d entries):\n"
#string STR_IFCONFIG_ROUTES_ENTRY_INDEX   #language en-US  "    Entry[%d]\n"
#string STR_IFCONFIG_CONF_IP_ADDR         #language en-US  "IfConfig: IP address conflict with MAC: %02x-%02x-%02x-%02x-%02x-%02x\n"
#string STR_IFCONFIG_SHOW_IP_ADDR         #language en-US  "%13s: %N%d.%d.%d.%d\n"
#string STR_IFCONFIG_SHOW_MAC_ADDR        #language en-US  "  MAC        : %02x-%02x-%02x-%02x-%02x-%02x\n"
#string STR_IFCONFIG_LINE_HELP            #language en-US  "Modify the default IP address of UEFI network stack"
#string STR_GET_HELP_IFCONFIG             #language en-US  ""
".TH ifconfig 0 "configure IPv4 adapter"\r\n"
".SH NAME\r\n"
"Modify the default IP address of the UEFI IP4 Network Stack.\r\n"
".SH SYNOPSIS\r\n"
"ifConfig [-?] [-c [Name]] [-l [Name]] [-s <Name> dhcp | <static <IP> <Mask> <Gateway>> [permanent]]\r\n"
".SH OPTIONS\r\n"
"Name         Adapter name, i.e., eth0\r\n"
"-c [Name]    Clear the configuration for all or specified interface, and the network stack for related interface will fall back to the DHCP as default.\r\n"
"-l [Name]    List the configuration for all or the specified interface.\r\n"
"-s < Name> static <IP> <SubnetMask> <GatewayMask> [permanent]\r\n"
"   Use static IP4 address configuration for all or specified interface. If permanent is not present, the configuration is one-time only, otherwise this configuration request will survive a network stack reload.\r\n"
"-s <Name> dhcp [permanent]\r\n"
"   Use DHCP4 to request the IP4 address configuration dynamically for all interface or specified interface. If permanent is not present, the configuration is one-time only, otherwise this configuration request will survive a network stack reload.\r\n"
"IP           IP4 address in four integer values (each between 0-255). i.e., 192.168.0.10\r\n"
"SubnetMask   Subnet mask in four integer values (each between 0-255), i.e., 255.255.255.0 \r\n"
"GatewayMask  Default gateway in four integer values (each between 0-255), i.e., 192.168.0.1 \r\n"
".SH DESCRIPTION\r\n"
"This command is used to modify the default IP address for the UEFI IP4 Network Stack.\r\n"
".SH EXAMPLES\r\n"
"To list the configuration for the interface eth0:\r\n"
"    fs0:\> IfConfig -l eth0\r\n"
"\r\n"To use DHCP4 to request the IP4 address configuration dynamically for the interface eth0:\r\n"
"    fs0:\> IfConfig -s eth0 dhcp\r\n"
" To use the static IP4 address configuration for the interface eth0, and this configuration survives the network reload:\r\n"
"    fs0:\> IfConfig -s eth0 static 192.168.0.5 255.255.255.0 192.168.0.1 permanent\r\n"