/** @file MP initialize support functions for PEI phase. Copyright (c) 2016 - 2017, Intel Corporation. All rights reserved.
This program and the accompanying materials are licensed and made available under the terms and conditions of the BSD License which accompanies this distribution. The full text of the license may be found at http://opensource.org/licenses/bsd-license.php THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. **/ #include "MpLib.h" /** Enable Debug Agent to support source debugging on AP function. **/ VOID EnableDebugAgent ( VOID ) { } /** Get pointer to CPU MP Data structure. @return The pointer to CPU MP Data structure. **/ CPU_MP_DATA * GetCpuMpData ( VOID ) { CPU_MP_DATA *CpuMpData; CpuMpData = GetCpuMpDataFromGuidedHob (); ASSERT (CpuMpData != NULL); return CpuMpData; } /** Save the pointer to CPU MP Data structure. @param[in] CpuMpData The pointer to CPU MP Data structure will be saved. **/ VOID SaveCpuMpData ( IN CPU_MP_DATA *CpuMpData ) { UINT64 Data64; // // Build location of CPU MP DATA buffer in HOB // Data64 = (UINT64) (UINTN) CpuMpData; BuildGuidDataHob ( &mCpuInitMpLibHobGuid, (VOID *) &Data64, sizeof (UINT64) ); } /** Check if AP wakeup buffer is overlapped with existing allocated buffer. @param[in] WakeupBufferStart AP wakeup buffer start address. @param[in] WakeupBufferEnd AP wakeup buffer end address. @retval TRUE There is overlap. @retval FALSE There is no overlap. **/ BOOLEAN CheckOverlapWithAllocatedBuffer ( IN UINTN WakeupBufferStart, IN UINTN WakeupBufferEnd ) { EFI_PEI_HOB_POINTERS Hob; EFI_HOB_MEMORY_ALLOCATION *MemoryHob; BOOLEAN Overlapped; UINTN MemoryStart; UINTN MemoryEnd; Overlapped = FALSE; // // Get the HOB list for processing // Hob.Raw = GetHobList (); // // Collect memory ranges // while (!END_OF_HOB_LIST (Hob)) { if (Hob.Header->HobType == EFI_HOB_TYPE_MEMORY_ALLOCATION) { MemoryHob = Hob.MemoryAllocation; MemoryStart = (UINTN) MemoryHob->AllocDescriptor.MemoryBaseAddress; MemoryEnd = (UINTN) (MemoryHob->AllocDescriptor.MemoryBaseAddress + MemoryHob->AllocDescriptor.MemoryLength); if (!((WakeupBufferStart >= MemoryEnd) || (WakeupBufferEnd <= MemoryStart))) { Overlapped = TRUE; break; } } Hob.Raw = GET_NEXT_HOB (Hob); } return Overlapped; } /** Get available system memory below 1MB by specified size. @param[in] WakeupBufferSize Wakeup buffer size required @retval other Return wakeup buffer address below 1MB. @retval -1 Cannot find free memory below 1MB. **/ UINTN GetWakeupBuffer ( IN UINTN WakeupBufferSize ) { EFI_PEI_HOB_POINTERS Hob; UINTN WakeupBufferStart; UINTN WakeupBufferEnd; WakeupBufferSize = (WakeupBufferSize + SIZE_4KB - 1) & ~(SIZE_4KB - 1); // // Get the HOB list for processing // Hob.Raw = GetHobList (); // // Collect memory ranges // while (!END_OF_HOB_LIST (Hob)) { if (Hob.Header->HobType == EFI_HOB_TYPE_RESOURCE_DESCRIPTOR) { if ((Hob.ResourceDescriptor->PhysicalStart < BASE_1MB) && (Hob.ResourceDescriptor->ResourceType == EFI_RESOURCE_SYSTEM_MEMORY) && ((Hob.ResourceDescriptor->ResourceAttribute & (EFI_RESOURCE_ATTRIBUTE_READ_PROTECTED | EFI_RESOURCE_ATTRIBUTE_WRITE_PROTECTED | EFI_RESOURCE_ATTRIBUTE_EXECUTION_PROTECTED )) == 0) ) { // // Need memory under 1MB to be collected here // WakeupBufferEnd = (UINTN) (Hob.ResourceDescriptor->PhysicalStart + Hob.ResourceDescriptor->ResourceLength); if (WakeupBufferEnd > BASE_1MB) { // // Wakeup buffer should be under 1MB // WakeupBufferEnd = BASE_1MB; } while (WakeupBufferEnd > WakeupBufferSize) { // // Wakeup buffer should be aligned on 4KB // WakeupBufferStart = (WakeupBufferEnd - WakeupBufferSize) & ~(SIZE_4KB - 1); if (WakeupBufferStart < Hob.ResourceDescriptor->PhysicalStart) { break; } if (CheckOverlapWithAllocatedBuffer (WakeupBufferStart, WakeupBufferEnd)) { // // If this range is overlapped with existing allocated buffer, skip it // and find the next range // WakeupBufferEnd -= WakeupBufferSize; continue; } DEBUG ((DEBUG_INFO, "WakeupBufferStart = %x, WakeupBufferSize = %x\n", WakeupBufferStart, WakeupBufferSize)); return WakeupBufferStart; } } } // // Find the next HOB // Hob.Raw = GET_NEXT_HOB (Hob); } return (UINTN) -1; } /** Checks APs status and updates APs status if needed. **/ VOID CheckAndUpdateApsStatus ( VOID ) { } /** Initialize global data for MP support. @param[in] CpuMpData The pointer to CPU MP Data structure. **/ VOID InitMpGlobalData ( IN CPU_MP_DATA *CpuMpData ) { SaveCpuMpData (CpuMpData); } /** This service executes a caller provided function on all enabled APs. @param[in] Procedure A pointer to the function to be run on enabled APs of the system. See type EFI_AP_PROCEDURE. @param[in] SingleThread If TRUE, then all the enabled APs execute the function specified by Procedure one by one, in ascending order of processor handle number. If FALSE, then all the enabled APs execute the function specified by Procedure simultaneously. @param[in] WaitEvent The event created by the caller with CreateEvent() service. If it is NULL, then execute in blocking mode. BSP waits until all APs finish or TimeoutInMicroSeconds expires. If it's not NULL, then execute in non-blocking mode. BSP requests the function specified by Procedure to be started on all the enabled APs, and go on executing immediately. If all return from Procedure, or TimeoutInMicroSeconds expires, this event is signaled. The BSP can use the CheckEvent() or WaitForEvent() services to check the state of event. Type EFI_EVENT is defined in CreateEvent() in the Unified Extensible Firmware Interface Specification. @param[in] TimeoutInMicroseconds Indicates the time limit in microseconds for APs to return from Procedure, either for blocking or non-blocking mode. Zero means infinity. If the timeout expires before all APs return from Procedure, then Procedure on the failed APs is terminated. All enabled APs are available for next function assigned by MpInitLibStartupAllAPs() or MPInitLibStartupThisAP(). If the timeout expires in blocking mode, BSP returns EFI_TIMEOUT. If the timeout expires in non-blocking mode, WaitEvent is signaled with SignalEvent(). @param[in] ProcedureArgument The parameter passed into Procedure for all APs. @param[out] FailedCpuList If NULL, this parameter is ignored. Otherwise, if all APs finish successfully, then its content is set to NULL. If not all APs finish before timeout expires, then its content is set to address of the buffer holding handle numbers of the failed APs. The buffer is allocated by MP Initialization library, and it's the caller's responsibility to free the buffer with FreePool() service. In blocking mode, it is ready for consumption when the call returns. In non-blocking mode, it is ready when WaitEvent is signaled. The list of failed CPU is terminated by END_OF_CPU_LIST. @retval EFI_SUCCESS In blocking mode, all APs have finished before the timeout expired. @retval EFI_SUCCESS In non-blocking mode, function has been dispatched to all enabled APs. @retval EFI_UNSUPPORTED A non-blocking mode request was made after the UEFI event EFI_EVENT_GROUP_READY_TO_BOOT was signaled. @retval EFI_UNSUPPORTED WaitEvent is not NULL if non-blocking mode is not supported. @retval EFI_DEVICE_ERROR Caller processor is AP. @retval EFI_NOT_STARTED No enabled APs exist in the system. @retval EFI_NOT_READY Any enabled APs are busy. @retval EFI_NOT_READY MP Initialize Library is not initialized. @retval EFI_TIMEOUT In blocking mode, the timeout expired before all enabled APs have finished. @retval EFI_INVALID_PARAMETER Procedure is NULL. **/ EFI_STATUS EFIAPI MpInitLibStartupAllAPs ( IN EFI_AP_PROCEDURE Procedure, IN BOOLEAN SingleThread, IN EFI_EVENT WaitEvent OPTIONAL, IN UINTN TimeoutInMicroseconds, IN VOID *ProcedureArgument OPTIONAL, OUT UINTN **FailedCpuList OPTIONAL ) { if (WaitEvent != NULL) { return EFI_UNSUPPORTED; } return StartupAllAPsWorker ( Procedure, SingleThread, NULL, TimeoutInMicroseconds, ProcedureArgument, FailedCpuList ); } /** This service lets the caller get one enabled AP to execute a caller-provided function. @param[in] Procedure A pointer to the function to be run on the designated AP of the system. See type EFI_AP_PROCEDURE. @param[in] ProcessorNumber The handle number of the AP. The range is from 0 to the total number of logical processors minus 1. The total number of logical processors can be retrieved by MpInitLibGetNumberOfProcessors(). @param[in] WaitEvent The event created by the caller with CreateEvent() service. If it is NULL, then execute in blocking mode. BSP waits until this AP finish or TimeoutInMicroSeconds expires. If it's not NULL, then execute in non-blocking mode. BSP requests the function specified by Procedure to be started on this AP, and go on executing immediately. If this AP return from Procedure or TimeoutInMicroSeconds expires, this event is signaled. The BSP can use the CheckEvent() or WaitForEvent() services to check the state of event. Type EFI_EVENT is defined in CreateEvent() in the Unified Extensible Firmware Interface Specification. @param[in] TimeoutInMicroseconds Indicates the time limit in microseconds for this AP to finish this Procedure, either for blocking or non-blocking mode. Zero means infinity. If the timeout expires before this AP returns from Procedure, then Procedure on the AP is terminated. The AP is available for next function assigned by MpInitLibStartupAllAPs() or MpInitLibStartupThisAP(). If the timeout expires in blocking mode, BSP returns EFI_TIMEOUT. If the timeout expires in non-blocking mode, WaitEvent is signaled with SignalEvent(). @param[in] ProcedureArgument The parameter passed into Procedure on the specified AP. @param[out] Finished If NULL, this parameter is ignored. In blocking mode, this parameter is ignored. In non-blocking mode, if AP returns from Procedure before the timeout expires, its content is set to TRUE. Otherwise, the value is set to FALSE. The caller can determine if the AP returned from Procedure by evaluating this value. @retval EFI_SUCCESS In blocking mode, specified AP finished before the timeout expires. @retval EFI_SUCCESS In non-blocking mode, the function has been dispatched to specified AP. @retval EFI_UNSUPPORTED A non-blocking mode request was made after the UEFI event EFI_EVENT_GROUP_READY_TO_BOOT was signaled. @retval EFI_UNSUPPORTED WaitEvent is not NULL if non-blocking mode is not supported. @retval EFI_DEVICE_ERROR The calling processor is an AP. @retval EFI_TIMEOUT In blocking mode, the timeout expired before the specified AP has finished. @retval EFI_NOT_READY The specified AP is busy. @retval EFI_NOT_READY MP Initialize Library is not initialized. @retval EFI_NOT_FOUND The processor with the handle specified by ProcessorNumber does not exist. @retval EFI_INVALID_PARAMETER ProcessorNumber specifies the BSP or disabled AP. @retval EFI_INVALID_PARAMETER Procedure is NULL. **/ EFI_STATUS EFIAPI MpInitLibStartupThisAP ( IN EFI_AP_PROCEDURE Procedure, IN UINTN ProcessorNumber, IN EFI_EVENT WaitEvent OPTIONAL, IN UINTN TimeoutInMicroseconds, IN VOID *ProcedureArgument OPTIONAL, OUT BOOLEAN *Finished OPTIONAL ) { if (WaitEvent != NULL) { return EFI_UNSUPPORTED; } return StartupThisAPWorker ( Procedure, ProcessorNumber, NULL, TimeoutInMicroseconds, ProcedureArgument, Finished ); } /** This service switches the requested AP to be the BSP from that point onward. This service changes the BSP for all purposes. This call can only be performed by the current BSP. @param[in] ProcessorNumber The handle number of AP that is to become the new BSP. The range is from 0 to the total number of logical processors minus 1. The total number of logical processors can be retrieved by MpInitLibGetNumberOfProcessors(). @param[in] EnableOldBSP If TRUE, then the old BSP will be listed as an enabled AP. Otherwise, it will be disabled. @retval EFI_SUCCESS BSP successfully switched. @retval EFI_UNSUPPORTED Switching the BSP cannot be completed prior to this service returning. @retval EFI_UNSUPPORTED Switching the BSP is not supported. @retval EFI_DEVICE_ERROR The calling processor is an AP. @retval EFI_NOT_FOUND The processor with the handle specified by ProcessorNumber does not exist. @retval EFI_INVALID_PARAMETER ProcessorNumber specifies the current BSP or a disabled AP. @retval EFI_NOT_READY The specified AP is busy. @retval EFI_NOT_READY MP Initialize Library is not initialized. **/ EFI_STATUS EFIAPI MpInitLibSwitchBSP ( IN UINTN ProcessorNumber, IN BOOLEAN EnableOldBSP ) { return SwitchBSPWorker (ProcessorNumber, EnableOldBSP); } /** This service lets the caller enable or disable an AP from this point onward. This service may only be called from the BSP. @param[in] ProcessorNumber The handle number of AP. The range is from 0 to the total number of logical processors minus 1. The total number of logical processors can be retrieved by MpInitLibGetNumberOfProcessors(). @param[in] EnableAP Specifies the new state for the processor for enabled, FALSE for disabled. @param[in] HealthFlag If not NULL, a pointer to a value that specifies the new health status of the AP. This flag corresponds to StatusFlag defined in EFI_MP_SERVICES_PROTOCOL.GetProcessorInfo(). Only the PROCESSOR_HEALTH_STATUS_BIT is used. All other bits are ignored. If it is NULL, this parameter is ignored. @retval EFI_SUCCESS The specified AP was enabled or disabled successfully. @retval EFI_UNSUPPORTED Enabling or disabling an AP cannot be completed prior to this service returning. @retval EFI_UNSUPPORTED Enabling or disabling an AP is not supported. @retval EFI_DEVICE_ERROR The calling processor is an AP. @retval EFI_NOT_FOUND Processor with the handle specified by ProcessorNumber does not exist. @retval EFI_INVALID_PARAMETER ProcessorNumber specifies the BSP. @retval EFI_NOT_READY MP Initialize Library is not initialized. **/ EFI_STATUS EFIAPI MpInitLibEnableDisableAP ( IN UINTN ProcessorNumber, IN BOOLEAN EnableAP, IN UINT32 *HealthFlag OPTIONAL ) { return EnableDisableApWorker (ProcessorNumber, EnableAP, HealthFlag); }