/** @file
  The helper functions for BlockIo and BlockIo2 protocol.

  Copyright (c) 2015 - 2018, Intel Corporation. All rights reserved.<BR>
  SPDX-License-Identifier: BSD-2-Clause-Patent

**/

#include "SdDxe.h"

/**
  Nonblocking I/O callback funtion when the event is signaled.

  @param[in]  Event     The Event this notify function registered to.
  @param[in]  Context   Pointer to the context data registered to the
                        Event.

**/
VOID
EFIAPI
AsyncIoCallback (
  IN EFI_EVENT                Event,
  IN VOID                     *Context
  )
{
  SD_REQUEST                  *Request;

  gBS->CloseEvent (Event);

  Request = (SD_REQUEST *) Context;

  DEBUG_CODE_BEGIN ();
    DEBUG ((EFI_D_INFO, "Sd Async Request: CmdIndex[%d] Arg[%08x] %r\n",
            Request->SdMmcCmdBlk.CommandIndex, Request->SdMmcCmdBlk.CommandArgument,
            Request->Packet.TransactionStatus));
  DEBUG_CODE_END ();

  if (EFI_ERROR (Request->Packet.TransactionStatus)) {
    Request->Token->TransactionStatus = Request->Packet.TransactionStatus;
  }

  RemoveEntryList (&Request->Link);

  if (Request->IsEnd) {
    gBS->SignalEvent (Request->Token->Event);
  }

  FreePool (Request);
}

/**
  Send command SET_RELATIVE_ADDRESS to the device to set the device address.

  @param[in]  Device            A pointer to the SD_DEVICE instance.
  @param[out] Rca               The relative device address to assign.

  @retval EFI_SUCCESS           The request is executed successfully.
  @retval EFI_OUT_OF_RESOURCES  The request could not be executed due to a lack of resources.
  @retval Others                The request could not be executed successfully.

**/
EFI_STATUS
SdSetRca (
  IN     SD_DEVICE              *Device,
     OUT UINT16                 *Rca
  )
{
  EFI_STATUS                           Status;
  EFI_SD_MMC_PASS_THRU_PROTOCOL        *PassThru;
  EFI_SD_MMC_COMMAND_BLOCK             SdMmcCmdBlk;
  EFI_SD_MMC_STATUS_BLOCK              SdMmcStatusBlk;
  EFI_SD_MMC_PASS_THRU_COMMAND_PACKET  Packet;

  PassThru = Device->Private->PassThru;

  ZeroMem (&SdMmcCmdBlk, sizeof (SdMmcCmdBlk));
  ZeroMem (&SdMmcStatusBlk, sizeof (SdMmcStatusBlk));
  ZeroMem (&Packet, sizeof (Packet));
  Packet.SdMmcCmdBlk    = &SdMmcCmdBlk;
  Packet.SdMmcStatusBlk = &SdMmcStatusBlk;
  Packet.Timeout        = SD_GENERIC_TIMEOUT;

  SdMmcCmdBlk.CommandIndex = SD_SET_RELATIVE_ADDR;
  SdMmcCmdBlk.CommandType  = SdMmcCommandTypeBcr;
  SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR6;

  Status = PassThru->PassThru (PassThru, Device->Slot, &Packet, NULL);
  if (!EFI_ERROR (Status)) {
    DEBUG ((EFI_D_INFO, "Set RCA succeeds with Resp0 = 0x%x\n", SdMmcStatusBlk.Resp0));
    *Rca = (UINT16)(SdMmcStatusBlk.Resp0 >> 16);
  }

  return Status;
}

/**
  Send command SELECT to the device to select/deselect the device.

  @param[in]  Device            A pointer to the SD_DEVICE instance.
  @param[in]  Rca               The relative device address to use.

  @retval EFI_SUCCESS           The request is executed successfully.
  @retval EFI_OUT_OF_RESOURCES  The request could not be executed due to a lack of resources.
  @retval Others                The request could not be executed successfully.

**/
EFI_STATUS
SdSelect (
  IN     SD_DEVICE              *Device,
  IN     UINT16                 Rca
  )
{
  EFI_STATUS                           Status;
  EFI_SD_MMC_PASS_THRU_PROTOCOL        *PassThru;
  EFI_SD_MMC_COMMAND_BLOCK             SdMmcCmdBlk;
  EFI_SD_MMC_STATUS_BLOCK              SdMmcStatusBlk;
  EFI_SD_MMC_PASS_THRU_COMMAND_PACKET  Packet;

  PassThru = Device->Private->PassThru;

  ZeroMem (&SdMmcCmdBlk, sizeof (SdMmcCmdBlk));
  ZeroMem (&SdMmcStatusBlk, sizeof (SdMmcStatusBlk));
  ZeroMem (&Packet, sizeof (Packet));
  Packet.SdMmcCmdBlk    = &SdMmcCmdBlk;
  Packet.SdMmcStatusBlk = &SdMmcStatusBlk;
  Packet.Timeout        = SD_GENERIC_TIMEOUT;

  SdMmcCmdBlk.CommandIndex = SD_SELECT_DESELECT_CARD;
  SdMmcCmdBlk.CommandType  = SdMmcCommandTypeAc;
  if (Rca != 0) {
    SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR1b;
  }
  SdMmcCmdBlk.CommandArgument = (UINT32)Rca << 16;

  Status = PassThru->PassThru (PassThru, Device->Slot, &Packet, NULL);

  return Status;
}

/**
  Send command SEND_STATUS to the device to get device status.

  @param[in]  Device            A pointer to the SD_DEVICE instance.
  @param[in]  Rca               The relative device address to use.
  @param[out] DevStatus         The buffer to store the device status.

  @retval EFI_SUCCESS           The request is executed successfully.
  @retval EFI_OUT_OF_RESOURCES  The request could not be executed due to a lack of resources.
  @retval Others                The request could not be executed successfully.

**/
EFI_STATUS
SdSendStatus (
  IN     SD_DEVICE              *Device,
  IN     UINT16                 Rca,
     OUT UINT32                 *DevStatus
  )
{
  EFI_STATUS                           Status;
  EFI_SD_MMC_PASS_THRU_PROTOCOL        *PassThru;
  EFI_SD_MMC_COMMAND_BLOCK             SdMmcCmdBlk;
  EFI_SD_MMC_STATUS_BLOCK              SdMmcStatusBlk;
  EFI_SD_MMC_PASS_THRU_COMMAND_PACKET  Packet;

  PassThru = Device->Private->PassThru;

  ZeroMem (&SdMmcCmdBlk, sizeof (SdMmcCmdBlk));
  ZeroMem (&SdMmcStatusBlk, sizeof (SdMmcStatusBlk));
  ZeroMem (&Packet, sizeof (Packet));
  Packet.SdMmcCmdBlk    = &SdMmcCmdBlk;
  Packet.SdMmcStatusBlk = &SdMmcStatusBlk;
  Packet.Timeout        = SD_GENERIC_TIMEOUT;

  SdMmcCmdBlk.CommandIndex = SD_SEND_STATUS;
  SdMmcCmdBlk.CommandType  = SdMmcCommandTypeAc;
  SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR1;
  SdMmcCmdBlk.CommandArgument = (UINT32)Rca << 16;

  Status = PassThru->PassThru (PassThru, Device->Slot, &Packet, NULL);
  if (!EFI_ERROR (Status)) {
    CopyMem (DevStatus, &SdMmcStatusBlk.Resp0, sizeof (UINT32));
  }
  return Status;
}

/**
  Send command SEND_CSD to the device to get the CSD register data.

  @param[in]  Device            A pointer to the SD_DEVICE instance.
  @param[in]  Rca               The relative device address to use.
  @param[out] Csd               The buffer to store the SD_CSD register data.

  @retval EFI_SUCCESS           The request is executed successfully.
  @retval EFI_OUT_OF_RESOURCES  The request could not be executed due to a lack of resources.
  @retval Others                The request could not be executed successfully.

**/
EFI_STATUS
SdGetCsd (
  IN     SD_DEVICE              *Device,
  IN     UINT16                 Rca,
     OUT SD_CSD                 *Csd
  )
{
  EFI_STATUS                           Status;
  EFI_SD_MMC_PASS_THRU_PROTOCOL        *PassThru;
  EFI_SD_MMC_COMMAND_BLOCK             SdMmcCmdBlk;
  EFI_SD_MMC_STATUS_BLOCK              SdMmcStatusBlk;
  EFI_SD_MMC_PASS_THRU_COMMAND_PACKET  Packet;

  PassThru = Device->Private->PassThru;

  ZeroMem (&SdMmcCmdBlk, sizeof (SdMmcCmdBlk));
  ZeroMem (&SdMmcStatusBlk, sizeof (SdMmcStatusBlk));
  ZeroMem (&Packet, sizeof (Packet));
  ZeroMem (Csd, sizeof (SD_CSD));

  Packet.SdMmcCmdBlk    = &SdMmcCmdBlk;
  Packet.SdMmcStatusBlk = &SdMmcStatusBlk;
  Packet.Timeout        = SD_GENERIC_TIMEOUT;

  SdMmcCmdBlk.CommandIndex = SD_SEND_CSD;
  SdMmcCmdBlk.CommandType  = SdMmcCommandTypeAc;
  SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR2;
  SdMmcCmdBlk.CommandArgument = (UINT32)Rca << 16;

  Status = PassThru->PassThru (PassThru, Device->Slot, &Packet, NULL);

  if (!EFI_ERROR (Status)) {
    //
    // For details, refer to SD Host Controller Simplified Spec 3.0 Table 2-12.
    //
    CopyMem (((UINT8*)Csd) + 1, &SdMmcStatusBlk.Resp0, sizeof (SD_CSD) - 1);
  }

  return Status;
}

/**
  Send command SEND_CID to the device to get the CID register data.

  @param[in]  Device            A pointer to the SD_DEVICE instance.
  @param[in]  Rca               The relative device address to use.
  @param[out] Cid               The buffer to store the SD_CID register data.

  @retval EFI_SUCCESS           The request is executed successfully.
  @retval EFI_OUT_OF_RESOURCES  The request could not be executed due to a lack of resources.
  @retval Others                The request could not be executed successfully.

**/
EFI_STATUS
SdGetCid (
  IN     SD_DEVICE              *Device,
  IN     UINT16                 Rca,
     OUT SD_CID                 *Cid
  )
{
  EFI_STATUS                           Status;
  EFI_SD_MMC_PASS_THRU_PROTOCOL        *PassThru;
  EFI_SD_MMC_COMMAND_BLOCK             SdMmcCmdBlk;
  EFI_SD_MMC_STATUS_BLOCK              SdMmcStatusBlk;
  EFI_SD_MMC_PASS_THRU_COMMAND_PACKET  Packet;

  PassThru = Device->Private->PassThru;

  ZeroMem (&SdMmcCmdBlk, sizeof (SdMmcCmdBlk));
  ZeroMem (&SdMmcStatusBlk, sizeof (SdMmcStatusBlk));
  ZeroMem (&Packet, sizeof (Packet));
  ZeroMem (Cid, sizeof (SD_CID));

  Packet.SdMmcCmdBlk    = &SdMmcCmdBlk;
  Packet.SdMmcStatusBlk = &SdMmcStatusBlk;
  Packet.Timeout        = SD_GENERIC_TIMEOUT;

  SdMmcCmdBlk.CommandIndex = SD_SEND_CID;
  SdMmcCmdBlk.CommandType  = SdMmcCommandTypeAc;
  SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR2;
  SdMmcCmdBlk.CommandArgument = (UINT32)Rca << 16;

  Status = PassThru->PassThru (PassThru, Device->Slot, &Packet, NULL);

  if (!EFI_ERROR (Status)) {
    //
    // For details, refer to SD Host Controller Simplified Spec 3.0 Table 2-12.
    //
    CopyMem (((UINT8*)Cid) + 1, &SdMmcStatusBlk.Resp0, sizeof (SD_CID) - 1);
  }

  return Status;
}

/**
  Read/write single block through sync or async I/O request.

  @param[in]  Device            A pointer to the SD_DEVICE instance.
  @param[in]  Lba               The starting logical block address to be read/written.
                                The caller is responsible for reading/writing to only
                                legitimate locations.
  @param[in]  Buffer            A pointer to the destination/source buffer for the data.
  @param[in]  BufferSize        Size of Buffer, must be a multiple of device block size.
  @param[in]  IsRead            Indicates it is a read or write operation.
  @param[in]  Token             A pointer to the token associated with the transaction.
  @param[in]  IsEnd             A boolean to show whether it's the last cmd in a series of cmds.
                                This parameter is only meaningful in async I/O request.

  @retval EFI_SUCCESS           The request is executed successfully.
  @retval EFI_OUT_OF_RESOURCES  The request could not be executed due to a lack of resources.
  @retval Others                The request could not be executed successfully.

**/
EFI_STATUS
SdRwSingleBlock (
  IN  SD_DEVICE                 *Device,
  IN  EFI_LBA                   Lba,
  IN  VOID                      *Buffer,
  IN  UINTN                     BufferSize,
  IN  BOOLEAN                   IsRead,
  IN  EFI_BLOCK_IO2_TOKEN       *Token,
  IN  BOOLEAN                   IsEnd
  )
{
  EFI_STATUS                           Status;
  EFI_SD_MMC_PASS_THRU_PROTOCOL        *PassThru;
  SD_REQUEST                           *RwSingleBlkReq;
  EFI_TPL                              OldTpl;

  RwSingleBlkReq = NULL;
  PassThru       = Device->Private->PassThru;

  RwSingleBlkReq = AllocateZeroPool (sizeof (SD_REQUEST));
  if (RwSingleBlkReq == NULL) {
    Status = EFI_OUT_OF_RESOURCES;
    goto Error;
  }

  RwSingleBlkReq->Signature = SD_REQUEST_SIGNATURE;
  OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
  InsertTailList (&Device->Queue, &RwSingleBlkReq->Link);
  gBS->RestoreTPL (OldTpl);
  RwSingleBlkReq->Packet.SdMmcCmdBlk    = &RwSingleBlkReq->SdMmcCmdBlk;
  RwSingleBlkReq->Packet.SdMmcStatusBlk = &RwSingleBlkReq->SdMmcStatusBlk;
  //
  // Calculate timeout value through the below formula.
  // Timeout = (transfer size) / (2MB/s).
  // Taking 2MB/s as divisor as it's the lowest transfer speed
  // above class 2.
  // Refer to SD Physical Layer Simplified spec section 3.4 for details.
  //
  RwSingleBlkReq->Packet.Timeout = (BufferSize / (2 * 1024 * 1024) + 1) * 1000 * 1000;

  if (IsRead) {
    RwSingleBlkReq->Packet.InDataBuffer     = Buffer;
    RwSingleBlkReq->Packet.InTransferLength = (UINT32)BufferSize;

    RwSingleBlkReq->SdMmcCmdBlk.CommandIndex = SD_READ_SINGLE_BLOCK;
    RwSingleBlkReq->SdMmcCmdBlk.CommandType  = SdMmcCommandTypeAdtc;
    RwSingleBlkReq->SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR1;
  } else {
    RwSingleBlkReq->Packet.OutDataBuffer     = Buffer;
    RwSingleBlkReq->Packet.OutTransferLength = (UINT32)BufferSize;

    RwSingleBlkReq->SdMmcCmdBlk.CommandIndex = SD_WRITE_SINGLE_BLOCK;
    RwSingleBlkReq->SdMmcCmdBlk.CommandType  = SdMmcCommandTypeAdtc;
    RwSingleBlkReq->SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR1;
  }

  if (Device->SectorAddressing) {
    RwSingleBlkReq->SdMmcCmdBlk.CommandArgument = (UINT32)Lba;
  } else {
    RwSingleBlkReq->SdMmcCmdBlk.CommandArgument = (UINT32)MultU64x32 (Lba, Device->BlockMedia.BlockSize);
  }

  RwSingleBlkReq->IsEnd = IsEnd;
  RwSingleBlkReq->Token = Token;

  if ((Token != NULL) && (Token->Event != NULL)) {
    Status = gBS->CreateEvent (
                    EVT_NOTIFY_SIGNAL,
                    TPL_NOTIFY,
                    AsyncIoCallback,
                    RwSingleBlkReq,
                    &RwSingleBlkReq->Event
                    );
    if (EFI_ERROR (Status)) {
      goto Error;
    }
  } else {
    RwSingleBlkReq->Event = NULL;
  }

  Status = PassThru->PassThru (PassThru, Device->Slot, &RwSingleBlkReq->Packet, RwSingleBlkReq->Event);

Error:
  if ((Token != NULL) && (Token->Event != NULL)) {
    //
    // For asynchronous operation, only free request and event in error case.
    // The request and event will be freed in asynchronous callback for success case.
    //
    if (EFI_ERROR (Status) && (RwSingleBlkReq != NULL)) {
      OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
      RemoveEntryList (&RwSingleBlkReq->Link);
      gBS->RestoreTPL (OldTpl);
      if (RwSingleBlkReq->Event != NULL) {
        gBS->CloseEvent (RwSingleBlkReq->Event);
      }
      FreePool (RwSingleBlkReq);
    }
  } else {
    //
    // For synchronous operation, free request whatever the execution result is.
    //
    if (RwSingleBlkReq != NULL) {
      OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
      RemoveEntryList (&RwSingleBlkReq->Link);
      gBS->RestoreTPL (OldTpl);
      FreePool (RwSingleBlkReq);
    }
  }

  return Status;
}

/**
  Read/write multiple blocks through sync or async I/O request.

  @param[in]  Device            A pointer to the SD_DEVICE instance.
  @param[in]  Lba               The starting logical block address to be read/written.
                                The caller is responsible for reading/writing to only
                                legitimate locations.
  @param[in]  Buffer            A pointer to the destination/source buffer for the data.
  @param[in]  BufferSize        Size of Buffer, must be a multiple of device block size.
  @param[in]  IsRead            Indicates it is a read or write operation.
  @param[in]  Token             A pointer to the token associated with the transaction.
  @param[in]  IsEnd             A boolean to show whether it's the last cmd in a series of cmds.
                                This parameter is only meaningful in async I/O request.

  @retval EFI_SUCCESS           The request is executed successfully.
  @retval EFI_OUT_OF_RESOURCES  The request could not be executed due to a lack of resources.
  @retval Others                The request could not be executed successfully.

**/
EFI_STATUS
SdRwMultiBlocks (
  IN  SD_DEVICE                 *Device,
  IN  EFI_LBA                   Lba,
  IN  VOID                      *Buffer,
  IN  UINTN                     BufferSize,
  IN  BOOLEAN                   IsRead,
  IN  EFI_BLOCK_IO2_TOKEN       *Token,
  IN  BOOLEAN                   IsEnd
  )
{
  EFI_STATUS                    Status;
  SD_REQUEST                    *RwMultiBlkReq;
  EFI_SD_MMC_PASS_THRU_PROTOCOL *PassThru;
  EFI_TPL                       OldTpl;

  RwMultiBlkReq = NULL;

  PassThru = Device->Private->PassThru;

  RwMultiBlkReq = AllocateZeroPool (sizeof (SD_REQUEST));
  if (RwMultiBlkReq == NULL) {
    Status = EFI_OUT_OF_RESOURCES;
    goto Error;
  }

  RwMultiBlkReq->Signature = SD_REQUEST_SIGNATURE;
  OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
  InsertTailList (&Device->Queue, &RwMultiBlkReq->Link);
  gBS->RestoreTPL (OldTpl);
  RwMultiBlkReq->Packet.SdMmcCmdBlk    = &RwMultiBlkReq->SdMmcCmdBlk;
  RwMultiBlkReq->Packet.SdMmcStatusBlk = &RwMultiBlkReq->SdMmcStatusBlk;
  //
  // Calculate timeout value through the below formula.
  // Timeout = (transfer size) / (2MB/s).
  // Taking 2MB/s as divisor as it's the lowest transfer speed
  // above class 2.
  // Refer to SD Physical Layer Simplified spec section 3.4 for details.
  //
  RwMultiBlkReq->Packet.Timeout = (BufferSize / (2 * 1024 * 1024) + 1) * 1000 * 1000;

  if (IsRead) {
    RwMultiBlkReq->Packet.InDataBuffer     = Buffer;
    RwMultiBlkReq->Packet.InTransferLength = (UINT32)BufferSize;

    RwMultiBlkReq->SdMmcCmdBlk.CommandIndex = SD_READ_MULTIPLE_BLOCK;
    RwMultiBlkReq->SdMmcCmdBlk.CommandType  = SdMmcCommandTypeAdtc;
    RwMultiBlkReq->SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR1;
  } else {
    RwMultiBlkReq->Packet.OutDataBuffer     = Buffer;
    RwMultiBlkReq->Packet.OutTransferLength = (UINT32)BufferSize;

    RwMultiBlkReq->SdMmcCmdBlk.CommandIndex = SD_WRITE_MULTIPLE_BLOCK;
    RwMultiBlkReq->SdMmcCmdBlk.CommandType  = SdMmcCommandTypeAdtc;
    RwMultiBlkReq->SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR1;
  }

  if (Device->SectorAddressing) {
    RwMultiBlkReq->SdMmcCmdBlk.CommandArgument = (UINT32)Lba;
  } else {
    RwMultiBlkReq->SdMmcCmdBlk.CommandArgument = (UINT32)MultU64x32 (Lba, Device->BlockMedia.BlockSize);
  }

  RwMultiBlkReq->IsEnd = IsEnd;
  RwMultiBlkReq->Token = Token;

  if ((Token != NULL) && (Token->Event != NULL)) {
    Status = gBS->CreateEvent (
                    EVT_NOTIFY_SIGNAL,
                    TPL_NOTIFY,
                    AsyncIoCallback,
                    RwMultiBlkReq,
                    &RwMultiBlkReq->Event
                    );
    if (EFI_ERROR (Status)) {
      goto Error;
    }
  } else {
    RwMultiBlkReq->Event = NULL;
  }

  Status = PassThru->PassThru (PassThru, Device->Slot, &RwMultiBlkReq->Packet, RwMultiBlkReq->Event);

Error:
  if ((Token != NULL) && (Token->Event != NULL)) {
    //
    // For asynchronous operation, only free request and event in error case.
    // The request and event will be freed in asynchronous callback for success case.
    //
    if (EFI_ERROR (Status) && (RwMultiBlkReq != NULL)) {
      OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
      RemoveEntryList (&RwMultiBlkReq->Link);
      gBS->RestoreTPL (OldTpl);
      if (RwMultiBlkReq->Event != NULL) {
        gBS->CloseEvent (RwMultiBlkReq->Event);
      }
      FreePool (RwMultiBlkReq);
    }
  } else {
    //
    // For synchronous operation, free request whatever the execution result is.
    //
    if (RwMultiBlkReq != NULL) {
      OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
      RemoveEntryList (&RwMultiBlkReq->Link);
      gBS->RestoreTPL (OldTpl);
      FreePool (RwMultiBlkReq);
    }
  }

  return Status;
}

/**
  This function transfers data from/to the sd memory card device.

  @param[in]       Device       A pointer to the SD_DEVICE instance.
  @param[in]       MediaId      The media ID that the read/write request is for.
  @param[in]       Lba          The starting logical block address to be read/written.
                                The caller is responsible for reading/writing to only
                                legitimate locations.
  @param[in, out]  Buffer       A pointer to the destination/source buffer for the data.
  @param[in]       BufferSize   Size of Buffer, must be a multiple of device block size.
  @param[in]       IsRead       Indicates it is a read or write operation.
  @param[in, out]  Token        A pointer to the token associated with the transaction.

  @retval EFI_SUCCESS           The data was read/written correctly to the device.
  @retval EFI_WRITE_PROTECTED   The device can not be read/written to.
  @retval EFI_DEVICE_ERROR      The device reported an error while performing the read/write.
  @retval EFI_NO_MEDIA          There is no media in the device.
  @retval EFI_MEDIA_CHNAGED     The MediaId does not matched the current device.
  @retval EFI_BAD_BUFFER_SIZE   The Buffer was not a multiple of the block size of the device.
  @retval EFI_INVALID_PARAMETER The read/write request contains LBAs that are not valid,
                                or the buffer is not on proper alignment.

**/
EFI_STATUS
SdReadWrite (
  IN     SD_DEVICE                      *Device,
  IN     UINT32                         MediaId,
  IN     EFI_LBA                        Lba,
  IN OUT VOID                           *Buffer,
  IN     UINTN                          BufferSize,
  IN     BOOLEAN                        IsRead,
  IN OUT EFI_BLOCK_IO2_TOKEN            *Token
  )
{
  EFI_STATUS                            Status;
  EFI_BLOCK_IO_MEDIA                    *Media;
  UINTN                                 BlockSize;
  UINTN                                 BlockNum;
  UINTN                                 IoAlign;
  UINTN                                 Remaining;
  UINT32                                MaxBlock;
  BOOLEAN                               LastRw;

  Status = EFI_SUCCESS;
  Media  = &Device->BlockMedia;
  LastRw = FALSE;

  if (MediaId != Media->MediaId) {
    return EFI_MEDIA_CHANGED;
  }

  if (!IsRead && Media->ReadOnly) {
    return EFI_WRITE_PROTECTED;
  }

  //
  // Check parameters.
  //
  if (Buffer == NULL) {
    return EFI_INVALID_PARAMETER;
  }

  if (BufferSize == 0) {
    if ((Token != NULL) && (Token->Event != NULL)) {
      Token->TransactionStatus = EFI_SUCCESS;
      gBS->SignalEvent (Token->Event);
    }
    return EFI_SUCCESS;
  }

  BlockSize = Media->BlockSize;
  if ((BufferSize % BlockSize) != 0) {
    return EFI_BAD_BUFFER_SIZE;
  }

  BlockNum  = BufferSize / BlockSize;
  if ((Lba + BlockNum - 1) > Media->LastBlock) {
    return EFI_INVALID_PARAMETER;
  }

  IoAlign = Media->IoAlign;
  if (IoAlign > 0 && (((UINTN) Buffer & (IoAlign - 1)) != 0)) {
    return EFI_INVALID_PARAMETER;
  }

  if ((Token != NULL) && (Token->Event != NULL)) {
    Token->TransactionStatus = EFI_SUCCESS;
  }

  //
  // Start to execute data transfer. The max block number in single cmd is 65535 blocks.
  //
  Remaining = BlockNum;
  MaxBlock  = 0xFFFF;

  while (Remaining > 0) {
    if (Remaining <= MaxBlock) {
      BlockNum = Remaining;
      LastRw   = TRUE;
    } else {
      BlockNum = MaxBlock;
    }

    BufferSize = BlockNum * BlockSize;
    if (BlockNum == 1) {
      Status = SdRwSingleBlock (Device, Lba, Buffer, BufferSize, IsRead, Token, LastRw);
    } else {
      Status = SdRwMultiBlocks (Device, Lba, Buffer, BufferSize, IsRead, Token, LastRw);
    }
    if (EFI_ERROR (Status)) {
      return Status;
    }
    DEBUG ((DEBUG_BLKIO, "Sd%a(): Lba 0x%x BlkNo 0x%x Event %p with %r\n",
      IsRead ? "Read" : "Write", Lba, BlockNum,
      (Token != NULL) ? Token->Event : NULL, Status));
    Lba   += BlockNum;
    Buffer = (UINT8*)Buffer + BufferSize;
    Remaining -= BlockNum;
  }

  return Status;
}

/**
  Reset the Block Device.

  @param  This                 Indicates a pointer to the calling context.
  @param  ExtendedVerification Driver may perform diagnostics on reset.

  @retval EFI_SUCCESS          The device was reset.
  @retval EFI_DEVICE_ERROR     The device is not functioning properly and could
                               not be reset.

**/
EFI_STATUS
EFIAPI
SdReset (
  IN  EFI_BLOCK_IO_PROTOCOL     *This,
  IN  BOOLEAN                   ExtendedVerification
  )
{
  EFI_STATUS                    Status;
  SD_DEVICE                     *Device;
  EFI_SD_MMC_PASS_THRU_PROTOCOL *PassThru;

  Device = SD_DEVICE_DATA_FROM_BLKIO (This);

  PassThru = Device->Private->PassThru;
  Status   = PassThru->ResetDevice (PassThru, Device->Slot);
  if (EFI_ERROR (Status)) {
    Status = EFI_DEVICE_ERROR;
  }

  return Status;
}

/**
  Read BufferSize bytes from Lba into Buffer.

  @param  This       Indicates a pointer to the calling context.
  @param  MediaId    Id of the media, changes every time the media is replaced.
  @param  Lba        The starting Logical Block Address to read from
  @param  BufferSize Size of Buffer, must be a multiple of device block size.
  @param  Buffer     A pointer to the destination buffer for the data. The caller is
                     responsible for either having implicit or explicit ownership of the buffer.

  @retval EFI_SUCCESS           The data was read correctly from the device.
  @retval EFI_DEVICE_ERROR      The device reported an error while performing the read.
  @retval EFI_NO_MEDIA          There is no media in the device.
  @retval EFI_MEDIA_CHANGED     The MediaId does not matched the current device.
  @retval EFI_BAD_BUFFER_SIZE   The Buffer was not a multiple of the block size of the device.
  @retval EFI_INVALID_PARAMETER The read request contains LBAs that are not valid,
                                or the buffer is not on proper alignment.

**/
EFI_STATUS
EFIAPI
SdReadBlocks (
  IN     EFI_BLOCK_IO_PROTOCOL  *This,
  IN     UINT32                 MediaId,
  IN     EFI_LBA                Lba,
  IN     UINTN                  BufferSize,
     OUT VOID                   *Buffer
  )
{
  EFI_STATUS             Status;
  SD_DEVICE              *Device;

  Device = SD_DEVICE_DATA_FROM_BLKIO (This);

  Status = SdReadWrite (Device, MediaId, Lba, Buffer, BufferSize, TRUE, NULL);
  return Status;
}

/**
  Write BufferSize bytes from Lba into Buffer.

  @param  This       Indicates a pointer to the calling context.
  @param  MediaId    The media ID that the write request is for.
  @param  Lba        The starting logical block address to be written. The caller is
                     responsible for writing to only legitimate locations.
  @param  BufferSize Size of Buffer, must be a multiple of device block size.
  @param  Buffer     A pointer to the source buffer for the data.

  @retval EFI_SUCCESS           The data was written correctly to the device.
  @retval EFI_WRITE_PROTECTED   The device can not be written to.
  @retval EFI_DEVICE_ERROR      The device reported an error while performing the write.
  @retval EFI_NO_MEDIA          There is no media in the device.
  @retval EFI_MEDIA_CHNAGED     The MediaId does not matched the current device.
  @retval EFI_BAD_BUFFER_SIZE   The Buffer was not a multiple of the block size of the device.
  @retval EFI_INVALID_PARAMETER The write request contains LBAs that are not valid,
                                or the buffer is not on proper alignment.

**/
EFI_STATUS
EFIAPI
SdWriteBlocks (
  IN  EFI_BLOCK_IO_PROTOCOL   *This,
  IN  UINT32                  MediaId,
  IN  EFI_LBA                 Lba,
  IN  UINTN                   BufferSize,
  IN  VOID                    *Buffer
  )
{
  EFI_STATUS             Status;
  SD_DEVICE              *Device;

  Device = SD_DEVICE_DATA_FROM_BLKIO (This);

  Status = SdReadWrite (Device, MediaId, Lba, Buffer, BufferSize, FALSE, NULL);
  return Status;
}

/**
  Flush the Block Device.

  @param  This              Indicates a pointer to the calling context.

  @retval EFI_SUCCESS       All outstanding data was written to the device
  @retval EFI_DEVICE_ERROR  The device reported an error while writing back the data
  @retval EFI_NO_MEDIA      There is no media in the device.

**/
EFI_STATUS
EFIAPI
SdFlushBlocks (
  IN  EFI_BLOCK_IO_PROTOCOL   *This
  )
{
  //
  // return directly
  //
  return EFI_SUCCESS;
}

/**
  Reset the Block Device.

  @param[in]  This                 Indicates a pointer to the calling context.
  @param[in]  ExtendedVerification Driver may perform diagnostics on reset.

  @retval EFI_SUCCESS              The device was reset.
  @retval EFI_DEVICE_ERROR         The device is not functioning properly and could
                                   not be reset.

**/
EFI_STATUS
EFIAPI
SdResetEx (
  IN  EFI_BLOCK_IO2_PROTOCOL  *This,
  IN  BOOLEAN                 ExtendedVerification
  )
{
  SD_DEVICE                   *Device;
  LIST_ENTRY                  *Link;
  LIST_ENTRY                  *NextLink;
  SD_REQUEST                  *Request;
  EFI_TPL                     OldTpl;

  Device = SD_DEVICE_DATA_FROM_BLKIO2 (This);

  OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
  for (Link = GetFirstNode (&Device->Queue);
       !IsNull (&Device->Queue, Link);
       Link = NextLink) {
    NextLink = GetNextNode (&Device->Queue, Link);
    RemoveEntryList (Link);

    Request = SD_REQUEST_FROM_LINK (Link);

    gBS->CloseEvent (Request->Event);
    Request->Token->TransactionStatus = EFI_ABORTED;

    if (Request->IsEnd) {
      gBS->SignalEvent (Request->Token->Event);
    }

    FreePool (Request);
  }
  gBS->RestoreTPL (OldTpl);

  return EFI_SUCCESS;
}

/**
  Read BufferSize bytes from Lba into Buffer.

  @param[in]       This         Indicates a pointer to the calling context.
  @param[in]       MediaId      Id of the media, changes every time the media is replaced.
  @param[in]       Lba          The starting Logical Block Address to read from.
  @param[in, out]  Token        A pointer to the token associated with the transaction.
  @param[in]       BufferSize   Size of Buffer, must be a multiple of device block size.
  @param[out]      Buffer       A pointer to the destination buffer for the data. The caller is
                                responsible for either having implicit or explicit ownership of the buffer.

  @retval EFI_SUCCESS           The read request was queued if Event is not NULL.
                                The data was read correctly from the device if
                                the Event is NULL.
  @retval EFI_DEVICE_ERROR      The device reported an error while performing
                                the read.
  @retval EFI_NO_MEDIA          There is no media in the device.
  @retval EFI_MEDIA_CHANGED     The MediaId is not for the current media.
  @retval EFI_BAD_BUFFER_SIZE   The BufferSize parameter is not a multiple of the
                                intrinsic block size of the device.
  @retval EFI_INVALID_PARAMETER The read request contains LBAs that are not valid,
                                or the buffer is not on proper alignment.
  @retval EFI_OUT_OF_RESOURCES  The request could not be completed due to a lack
                                of resources.

**/
EFI_STATUS
EFIAPI
SdReadBlocksEx (
  IN     EFI_BLOCK_IO2_PROTOCOL *This,
  IN     UINT32                 MediaId,
  IN     EFI_LBA                Lba,
  IN OUT EFI_BLOCK_IO2_TOKEN    *Token,
  IN     UINTN                  BufferSize,
     OUT VOID                   *Buffer
  )
{
  EFI_STATUS             Status;
  SD_DEVICE              *Device;

  Device = SD_DEVICE_DATA_FROM_BLKIO2 (This);

  Status = SdReadWrite (Device, MediaId, Lba, Buffer, BufferSize, TRUE, Token);
  return Status;
}

/**
  Write BufferSize bytes from Lba into Buffer.

  @param[in]       This         Indicates a pointer to the calling context.
  @param[in]       MediaId      The media ID that the write request is for.
  @param[in]       Lba          The starting logical block address to be written. The
                                caller is responsible for writing to only legitimate
                                locations.
  @param[in, out]  Token        A pointer to the token associated with the transaction.
  @param[in]       BufferSize   Size of Buffer, must be a multiple of device block size.
  @param[in]       Buffer       A pointer to the source buffer for the data.

  @retval EFI_SUCCESS           The data was written correctly to the device.
  @retval EFI_WRITE_PROTECTED   The device can not be written to.
  @retval EFI_DEVICE_ERROR      The device reported an error while performing the write.
  @retval EFI_NO_MEDIA          There is no media in the device.
  @retval EFI_MEDIA_CHNAGED     The MediaId does not matched the current device.
  @retval EFI_BAD_BUFFER_SIZE   The Buffer was not a multiple of the block size of the device.
  @retval EFI_INVALID_PARAMETER The write request contains LBAs that are not valid,
                                or the buffer is not on proper alignment.

**/
EFI_STATUS
EFIAPI
SdWriteBlocksEx (
  IN     EFI_BLOCK_IO2_PROTOCOL *This,
  IN     UINT32                 MediaId,
  IN     EFI_LBA                Lba,
  IN OUT EFI_BLOCK_IO2_TOKEN    *Token,
  IN     UINTN                  BufferSize,
  IN     VOID                   *Buffer
  )
{
  EFI_STATUS             Status;
  SD_DEVICE              *Device;

  Device = SD_DEVICE_DATA_FROM_BLKIO2 (This);

  Status = SdReadWrite (Device, MediaId, Lba, Buffer, BufferSize, FALSE, Token);
  return Status;
}

/**
  Flush the Block Device.

  @param[in]       This     Indicates a pointer to the calling context.
  @param[in, out]  Token    A pointer to the token associated with the transaction.

  @retval EFI_SUCCESS       All outstanding data was written to the device
  @retval EFI_DEVICE_ERROR  The device reported an error while writing back the data
  @retval EFI_NO_MEDIA      There is no media in the device.

**/
EFI_STATUS
EFIAPI
SdFlushBlocksEx (
  IN     EFI_BLOCK_IO2_PROTOCOL  *This,
  IN OUT EFI_BLOCK_IO2_TOKEN     *Token
  )
{
  //
  // Signal event and return directly.
  //
  if (Token != NULL && Token->Event != NULL) {
    Token->TransactionStatus = EFI_SUCCESS;
    gBS->SignalEvent (Token->Event);
  }

  return EFI_SUCCESS;
}

/**
  Set the erase start address through sync or async I/O request.

  @param[in]  Device            A pointer to the SD_DEVICE instance.
  @param[in]  StartLba          The starting logical block address to be erased.
  @param[in]  Token             A pointer to the token associated with the transaction.
  @param[in]  IsEnd             A boolean to show whether it's the last cmd in a series of cmds.
                                This parameter is only meaningful in async I/O request.

  @retval EFI_SUCCESS           The request is executed successfully.
  @retval EFI_OUT_OF_RESOURCES  The request could not be executed due to a lack of resources.
  @retval Others                The request could not be executed successfully.

**/
EFI_STATUS
SdEraseBlockStart (
  IN  SD_DEVICE                 *Device,
  IN  EFI_LBA                   StartLba,
  IN  EFI_BLOCK_IO2_TOKEN       *Token,
  IN  BOOLEAN                   IsEnd
  )
{
  EFI_STATUS                           Status;
  EFI_SD_MMC_PASS_THRU_PROTOCOL        *PassThru;
  SD_REQUEST                           *EraseBlockStart;
  EFI_TPL                              OldTpl;

  EraseBlockStart = NULL;
  PassThru        = Device->Private->PassThru;

  EraseBlockStart = AllocateZeroPool (sizeof (SD_REQUEST));
  if (EraseBlockStart == NULL) {
    Status = EFI_OUT_OF_RESOURCES;
    goto Error;
  }

  EraseBlockStart->Signature = SD_REQUEST_SIGNATURE;
  OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
  InsertTailList (&Device->Queue, &EraseBlockStart->Link);
  gBS->RestoreTPL (OldTpl);
  EraseBlockStart->Packet.SdMmcCmdBlk    = &EraseBlockStart->SdMmcCmdBlk;
  EraseBlockStart->Packet.SdMmcStatusBlk = &EraseBlockStart->SdMmcStatusBlk;
  EraseBlockStart->Packet.Timeout        = SD_GENERIC_TIMEOUT;

  EraseBlockStart->SdMmcCmdBlk.CommandIndex = SD_ERASE_WR_BLK_START;
  EraseBlockStart->SdMmcCmdBlk.CommandType  = SdMmcCommandTypeAc;
  EraseBlockStart->SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR1;

  if (Device->SectorAddressing) {
    EraseBlockStart->SdMmcCmdBlk.CommandArgument = (UINT32)StartLba;
  } else {
    EraseBlockStart->SdMmcCmdBlk.CommandArgument = (UINT32)MultU64x32 (StartLba, Device->BlockMedia.BlockSize);
  }

  EraseBlockStart->IsEnd = IsEnd;
  EraseBlockStart->Token = Token;

  if ((Token != NULL) && (Token->Event != NULL)) {
    Status = gBS->CreateEvent (
                    EVT_NOTIFY_SIGNAL,
                    TPL_NOTIFY,
                    AsyncIoCallback,
                    EraseBlockStart,
                    &EraseBlockStart->Event
                    );
    if (EFI_ERROR (Status)) {
      goto Error;
    }
  } else {
    EraseBlockStart->Event = NULL;
  }

  Status = PassThru->PassThru (PassThru, Device->Slot, &EraseBlockStart->Packet, EraseBlockStart->Event);

Error:
  if ((Token != NULL) && (Token->Event != NULL)) {
    //
    // For asynchronous operation, only free request and event in error case.
    // The request and event will be freed in asynchronous callback for success case.
    //
    if (EFI_ERROR (Status) && (EraseBlockStart != NULL)) {
      OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
      RemoveEntryList (&EraseBlockStart->Link);
      gBS->RestoreTPL (OldTpl);
      if (EraseBlockStart->Event != NULL) {
        gBS->CloseEvent (EraseBlockStart->Event);
      }
      FreePool (EraseBlockStart);
    }
  } else {
    //
    // For synchronous operation, free request whatever the execution result is.
    //
    if (EraseBlockStart != NULL) {
      OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
      RemoveEntryList (&EraseBlockStart->Link);
      gBS->RestoreTPL (OldTpl);
      FreePool (EraseBlockStart);
    }
  }

  return Status;
}

/**
  Set the erase end address through sync or async I/O request.

  @param[in]  Device            A pointer to the SD_DEVICE instance.
  @param[in]  EndLba            The ending logical block address to be erased.
  @param[in]  Token             A pointer to the token associated with the transaction.
  @param[in]  IsEnd             A boolean to show whether it's the last cmd in a series of cmds.
                                This parameter is only meaningful in async I/O request.

  @retval EFI_SUCCESS           The request is executed successfully.
  @retval EFI_OUT_OF_RESOURCES  The request could not be executed due to a lack of resources.
  @retval Others                The request could not be executed successfully.

**/
EFI_STATUS
SdEraseBlockEnd (
  IN  SD_DEVICE                 *Device,
  IN  EFI_LBA                   EndLba,
  IN  EFI_BLOCK_IO2_TOKEN       *Token,
  IN  BOOLEAN                   IsEnd
  )
{
  EFI_STATUS                           Status;
  EFI_SD_MMC_PASS_THRU_PROTOCOL        *PassThru;
  SD_REQUEST                           *EraseBlockEnd;
  EFI_TPL                              OldTpl;

  EraseBlockEnd = NULL;
  PassThru      = Device->Private->PassThru;

  EraseBlockEnd = AllocateZeroPool (sizeof (SD_REQUEST));
  if (EraseBlockEnd == NULL) {
    Status = EFI_OUT_OF_RESOURCES;
    goto Error;
  }

  EraseBlockEnd->Signature = SD_REQUEST_SIGNATURE;
  OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
  InsertTailList (&Device->Queue, &EraseBlockEnd->Link);
  gBS->RestoreTPL (OldTpl);
  EraseBlockEnd->Packet.SdMmcCmdBlk    = &EraseBlockEnd->SdMmcCmdBlk;
  EraseBlockEnd->Packet.SdMmcStatusBlk = &EraseBlockEnd->SdMmcStatusBlk;
  EraseBlockEnd->Packet.Timeout        = SD_GENERIC_TIMEOUT;

  EraseBlockEnd->SdMmcCmdBlk.CommandIndex = SD_ERASE_WR_BLK_END;
  EraseBlockEnd->SdMmcCmdBlk.CommandType  = SdMmcCommandTypeAc;
  EraseBlockEnd->SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR1;

  if (Device->SectorAddressing) {
    EraseBlockEnd->SdMmcCmdBlk.CommandArgument = (UINT32)EndLba;
  } else {
    EraseBlockEnd->SdMmcCmdBlk.CommandArgument = (UINT32)MultU64x32 (EndLba, Device->BlockMedia.BlockSize);
  }

  EraseBlockEnd->IsEnd = IsEnd;
  EraseBlockEnd->Token = Token;

  if ((Token != NULL) && (Token->Event != NULL)) {
    Status = gBS->CreateEvent (
                    EVT_NOTIFY_SIGNAL,
                    TPL_NOTIFY,
                    AsyncIoCallback,
                    EraseBlockEnd,
                    &EraseBlockEnd->Event
                    );
    if (EFI_ERROR (Status)) {
      goto Error;
    }
  } else {
    EraseBlockEnd->Event = NULL;
  }

  Status = PassThru->PassThru (PassThru, Device->Slot, &EraseBlockEnd->Packet, EraseBlockEnd->Event);

Error:
  if ((Token != NULL) && (Token->Event != NULL)) {
    //
    // For asynchronous operation, only free request and event in error case.
    // The request and event will be freed in asynchronous callback for success case.
    //
    if (EFI_ERROR (Status) && (EraseBlockEnd != NULL)) {
      OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
      RemoveEntryList (&EraseBlockEnd->Link);
      gBS->RestoreTPL (OldTpl);
      if (EraseBlockEnd->Event != NULL) {
        gBS->CloseEvent (EraseBlockEnd->Event);
      }
      FreePool (EraseBlockEnd);
    }
  } else {
    //
    // For synchronous operation, free request whatever the execution result is.
    //
    if (EraseBlockEnd != NULL) {
      OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
      RemoveEntryList (&EraseBlockEnd->Link);
      gBS->RestoreTPL (OldTpl);
      FreePool (EraseBlockEnd);
    }
  }

  return Status;
}

/**
  Erase specified blocks through sync or async I/O request.

  @param[in]  Device            A pointer to the SD_DEVICE instance.
  @param[in]  Token             A pointer to the token associated with the transaction.
  @param[in]  IsEnd             A boolean to show whether it's the last cmd in a series of cmds.
                                This parameter is only meaningful in async I/O request.

  @retval EFI_SUCCESS           The request is executed successfully.
  @retval EFI_OUT_OF_RESOURCES  The request could not be executed due to a lack of resources.
  @retval Others                The request could not be executed successfully.

**/
EFI_STATUS
SdEraseBlock (
  IN  SD_DEVICE                 *Device,
  IN  EFI_BLOCK_IO2_TOKEN       *Token,
  IN  BOOLEAN                   IsEnd
  )
{
  EFI_STATUS                           Status;
  EFI_SD_MMC_PASS_THRU_PROTOCOL        *PassThru;
  SD_REQUEST                           *EraseBlock;
  EFI_TPL                              OldTpl;

  EraseBlock = NULL;
  PassThru   = Device->Private->PassThru;

  EraseBlock = AllocateZeroPool (sizeof (SD_REQUEST));
  if (EraseBlock == NULL) {
    Status = EFI_OUT_OF_RESOURCES;
    goto Error;
  }

  EraseBlock->Signature = SD_REQUEST_SIGNATURE;
  OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
  InsertTailList (&Device->Queue, &EraseBlock->Link);
  gBS->RestoreTPL (OldTpl);
  EraseBlock->Packet.SdMmcCmdBlk    = &EraseBlock->SdMmcCmdBlk;
  EraseBlock->Packet.SdMmcStatusBlk = &EraseBlock->SdMmcStatusBlk;
  EraseBlock->Packet.Timeout        = SD_GENERIC_TIMEOUT;

  EraseBlock->SdMmcCmdBlk.CommandIndex = SD_ERASE;
  EraseBlock->SdMmcCmdBlk.CommandType  = SdMmcCommandTypeAc;
  EraseBlock->SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR1b;

  EraseBlock->IsEnd = IsEnd;
  EraseBlock->Token = Token;

  if ((Token != NULL) && (Token->Event != NULL)) {
    Status = gBS->CreateEvent (
                    EVT_NOTIFY_SIGNAL,
                    TPL_NOTIFY,
                    AsyncIoCallback,
                    EraseBlock,
                    &EraseBlock->Event
                    );
    if (EFI_ERROR (Status)) {
      goto Error;
    }
  } else {
    EraseBlock->Event = NULL;
  }

  Status = PassThru->PassThru (PassThru, Device->Slot, &EraseBlock->Packet, EraseBlock->Event);

Error:
  if ((Token != NULL) && (Token->Event != NULL)) {
    //
    // For asynchronous operation, only free request and event in error case.
    // The request and event will be freed in asynchronous callback for success case.
    //
    if (EFI_ERROR (Status) && (EraseBlock != NULL)) {
      OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
      RemoveEntryList (&EraseBlock->Link);
      gBS->RestoreTPL (OldTpl);
      if (EraseBlock->Event != NULL) {
        gBS->CloseEvent (EraseBlock->Event);
      }
      FreePool (EraseBlock);
    }
  } else {
    //
    // For synchronous operation, free request whatever the execution result is.
    //
    if (EraseBlock != NULL) {
      OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
      RemoveEntryList (&EraseBlock->Link);
      gBS->RestoreTPL (OldTpl);
      FreePool (EraseBlock);
    }
  }

  return Status;
}

/**
  Erase a specified number of device blocks.

  @param[in]       This           Indicates a pointer to the calling context.
  @param[in]       MediaId        The media ID that the erase request is for.
  @param[in]       Lba            The starting logical block address to be
                                  erased. The caller is responsible for erasing
                                  only legitimate locations.
  @param[in, out]  Token          A pointer to the token associated with the
                                  transaction.
  @param[in]       Size           The size in bytes to be erased. This must be
                                  a multiple of the physical block size of the
                                  device.

  @retval EFI_SUCCESS             The erase request was queued if Event is not
                                  NULL. The data was erased correctly to the
                                  device if the Event is NULL.to the device.
  @retval EFI_WRITE_PROTECTED     The device cannot be erased due to write
                                  protection.
  @retval EFI_DEVICE_ERROR        The device reported an error while attempting
                                  to perform the erase operation.
  @retval EFI_INVALID_PARAMETER   The erase request contains LBAs that are not
                                  valid.
  @retval EFI_NO_MEDIA            There is no media in the device.
  @retval EFI_MEDIA_CHANGED       The MediaId is not for the current media.

**/
EFI_STATUS
EFIAPI
SdEraseBlocks (
  IN     EFI_ERASE_BLOCK_PROTOCOL      *This,
  IN     UINT32                        MediaId,
  IN     EFI_LBA                       Lba,
  IN OUT EFI_ERASE_BLOCK_TOKEN         *Token,
  IN     UINTN                         Size
  )
{
  EFI_STATUS                            Status;
  EFI_BLOCK_IO_MEDIA                    *Media;
  UINTN                                 BlockSize;
  UINTN                                 BlockNum;
  EFI_LBA                               LastLba;
  SD_DEVICE                             *Device;

  Status = EFI_SUCCESS;
  Device = SD_DEVICE_DATA_FROM_ERASEBLK (This);
  Media  = &Device->BlockMedia;

  if (MediaId != Media->MediaId) {
    return EFI_MEDIA_CHANGED;
  }

  if (Media->ReadOnly) {
    return EFI_WRITE_PROTECTED;
  }

  //
  // Check parameters.
  //
  BlockSize = Media->BlockSize;
  if ((Size % BlockSize) != 0) {
    return EFI_INVALID_PARAMETER;
  }

  BlockNum  = Size / BlockSize;
  if ((Lba + BlockNum - 1) > Media->LastBlock) {
    return EFI_INVALID_PARAMETER;
  }

  if ((Token != NULL) && (Token->Event != NULL)) {
    Token->TransactionStatus = EFI_SUCCESS;
  }

  LastLba = Lba + BlockNum - 1;

  Status = SdEraseBlockStart (Device, Lba, (EFI_BLOCK_IO2_TOKEN*)Token, FALSE);
  if (EFI_ERROR (Status)) {
    return Status;
  }

  Status = SdEraseBlockEnd (Device, LastLba, (EFI_BLOCK_IO2_TOKEN*)Token, FALSE);
  if (EFI_ERROR (Status)) {
    return Status;
  }

  Status = SdEraseBlock (Device, (EFI_BLOCK_IO2_TOKEN*)Token, TRUE);
  if (EFI_ERROR (Status)) {
    return Status;
  }

  DEBUG ((EFI_D_ERROR, "SdEraseBlocks(): Lba 0x%x BlkNo 0x%x Event %p with %r\n", Lba, BlockNum, Token->Event, Status));

  return Status;
}