/** @file
Header file for SCSI Bus Driver.
Copyright (c) 2006 - 2010, Intel Corporation. All rights reserved.
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#ifndef _SCSI_BUS_H_
#define _SCSI_BUS_H_
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#define SCSI_IO_DEV_SIGNATURE SIGNATURE_32 ('s', 'c', 'i', 'o')
typedef union {
UINT32 Scsi;
UINT8 ExtScsi[4];
} SCSI_ID;
typedef struct _SCSI_TARGET_ID {
SCSI_ID ScsiId;
UINT8 ExtScsiId[12];
}SCSI_TARGET_ID;
typedef struct {
VOID *Data1;
VOID *Data2;
} SCSI_EVENT_DATA;
typedef struct {
UINT32 Signature;
EFI_HANDLE Handle;
EFI_SCSI_IO_PROTOCOL ScsiIo;
EFI_DEVICE_PATH_PROTOCOL *DevicePath;
BOOLEAN ExtScsiSupport;
EFI_SCSI_PASS_THRU_PROTOCOL *ScsiPassThru;
EFI_EXT_SCSI_PASS_THRU_PROTOCOL *ExtScsiPassThru;
SCSI_TARGET_ID Pun;
UINT64 Lun;
UINT8 ScsiDeviceType;
UINT8 ScsiVersion;
BOOLEAN RemovableDevice;
} SCSI_IO_DEV;
#define SCSI_IO_DEV_FROM_THIS(a) CR (a, SCSI_IO_DEV, ScsiIo, SCSI_IO_DEV_SIGNATURE)
//
// SCSI Bus Controller device strcuture
//
#define EFI_SCSI_BUS_PROTOCOL_GUID \
{ \
0x5261213D, 0x3A3D, 0x441E, {0xB3, 0xAF, 0x21, 0xD3, 0xF7, 0xA4, 0xCA, 0x17} \
}
typedef struct _EFI_SCSI_BUS_PROTOCOL {
UINT64 Reserved;
} EFI_SCSI_BUS_PROTOCOL;
#define SCSI_BUS_DEVICE_SIGNATURE SIGNATURE_32 ('s', 'c', 's', 'i')
typedef struct _SCSI_BUS_DEVICE {
UINTN Signature;
EFI_SCSI_BUS_PROTOCOL BusIdentify;
BOOLEAN ExtScsiSupport;
EFI_SCSI_PASS_THRU_PROTOCOL *ScsiInterface;
EFI_EXT_SCSI_PASS_THRU_PROTOCOL *ExtScsiInterface;
EFI_DEVICE_PATH_PROTOCOL *DevicePath;
} SCSI_BUS_DEVICE;
#define SCSI_BUS_CONTROLLER_DEVICE_FROM_THIS(a) CR (a, SCSI_BUS_DEVICE, BusIdentify, SCSI_BUS_DEVICE_SIGNATURE)
//
// Global Variables
//
extern EFI_DRIVER_BINDING_PROTOCOL gScsiBusDriverBinding;
extern EFI_COMPONENT_NAME_PROTOCOL gScsiBusComponentName;
extern EFI_COMPONENT_NAME2_PROTOCOL gScsiBusComponentName2;
/**
Test to see if this driver supports ControllerHandle.
This service is called by the EFI boot service ConnectController(). In order
to make drivers as small as possible, there are a few calling restrictions for
this service. ConnectController() must follow these calling restrictions. If
any other agent wishes to call Supported() it must also follow these calling
restrictions.
@param This Protocol instance pointer.
@param ControllerHandle Handle of device to test
@param RemainingDevicePath Optional parameter use to pick a specific child
device to start.
@retval EFI_SUCCESS This driver supports this device
@retval EFI_ALREADY_STARTED This driver is already running on this device
@retval other This driver does not support this device
**/
EFI_STATUS
EFIAPI
SCSIBusDriverBindingSupported (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE Controller,
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
);
/**
Start this driver on ControllerHandle.
This service is called by the EFI boot service ConnectController(). In order
to make drivers as small as possible, there are a few calling restrictions for
this service. ConnectController() must follow these calling restrictions. If
any other agent wishes to call Start() it must also follow these calling
restrictions.
@param This Protocol instance pointer.
@param ControllerHandle Handle of device to bind driver to
@param RemainingDevicePath Optional parameter use to pick a specific child
device to start.
@retval EFI_SUCCESS This driver is added to ControllerHandle
@retval EFI_ALREADY_STARTED This driver is already running on ControllerHandle
@retval other This driver does not support this device
**/
EFI_STATUS
EFIAPI
SCSIBusDriverBindingStart (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE Controller,
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
);
/**
Stop this driver on ControllerHandle.
This service is called by the EFI boot service DisconnectController().
In order to make drivers as small as possible, there are a few calling
restrictions for this service. DisconnectController() must follow these
calling restrictions. If any other agent wishes to call Stop() it must also
follow these calling restrictions.
@param This Protocol instance pointer.
@param ControllerHandle Handle of device to stop driver on
@param NumberOfChildren Number of Handles in ChildHandleBuffer. If number of
children is zero stop the entire bus driver.
@param ChildHandleBuffer List of Child Handles to Stop.
@retval EFI_SUCCESS This driver is removed ControllerHandle
@retval other This driver was not removed from this device
**/
EFI_STATUS
EFIAPI
SCSIBusDriverBindingStop (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE Controller,
IN UINTN NumberOfChildren,
IN EFI_HANDLE *ChildHandleBuffer
);
//
// EFI Component Name Functions
//
/**
Retrieves a Unicode string that is the user readable name of the driver.
This function retrieves the user readable name of a driver in the form of a
Unicode string. If the driver specified by This has a user readable name in
the language specified by Language, then a pointer to the driver name is
returned in DriverName, and EFI_SUCCESS is returned. If the driver specified
by This does not support the language specified by Language,
then EFI_UNSUPPORTED is returned.
@param This A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
EFI_COMPONENT_NAME_PROTOCOL instance.
@param Language A pointer to a Null-terminated ASCII string
array indicating the language. This is the
language of the driver name that the caller is
requesting, and it must match one of the
languages specified in SupportedLanguages. The
number of languages supported by a driver is up
to the driver writer. Language is specified
in RFC 4646 or ISO 639-2 language code format.
@param DriverName A pointer to the Unicode string to return.
This Unicode string is the name of the
driver specified by This in the language
specified by Language.
@retval EFI_SUCCESS The Unicode string for the Driver specified by
This and the language specified by Language was
returned in DriverName.
@retval EFI_INVALID_PARAMETER Language is NULL.
@retval EFI_INVALID_PARAMETER DriverName is NULL.
@retval EFI_UNSUPPORTED The driver specified by This does not support
the language specified by Language.
**/
EFI_STATUS
EFIAPI
ScsiBusComponentNameGetDriverName (
IN EFI_COMPONENT_NAME_PROTOCOL *This,
IN CHAR8 *Language,
OUT CHAR16 **DriverName
);
/**
Retrieves a Unicode string that is the user readable name of the controller
that is being managed by a driver.
This function retrieves the user readable name of the controller specified by
ControllerHandle and ChildHandle in the form of a Unicode string. If the
driver specified by This has a user readable name in the language specified by
Language, then a pointer to the controller name is returned in ControllerName,
and EFI_SUCCESS is returned. If the driver specified by This is not currently
managing the controller specified by ControllerHandle and ChildHandle,
then EFI_UNSUPPORTED is returned. If the driver specified by This does not
support the language specified by Language, then EFI_UNSUPPORTED is returned.
@param This A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
EFI_COMPONENT_NAME_PROTOCOL instance.
@param ControllerHandle The handle of a controller that the driver
specified by This is managing. This handle
specifies the controller whose name is to be
returned.
@param ChildHandle The handle of the child controller to retrieve
the name of. This is an optional parameter that
may be NULL. It will be NULL for device
drivers. It will also be NULL for a bus drivers
that wish to retrieve the name of the bus
controller. It will not be NULL for a bus
driver that wishes to retrieve the name of a
child controller.
@param Language A pointer to a Null-terminated ASCII string
array indicating the language. This is the
language of the driver name that the caller is
requesting, and it must match one of the
languages specified in SupportedLanguages. The
number of languages supported by a driver is up
to the driver writer. Language is specified in
RFC 4646 or ISO 639-2 language code format.
@param ControllerName A pointer to the Unicode string to return.
This Unicode string is the name of the
controller specified by ControllerHandle and
ChildHandle in the language specified by
Language from the point of view of the driver
specified by This.
@retval EFI_SUCCESS The Unicode string for the user readable name in
the language specified by Language for the
driver specified by This was returned in
DriverName.
@retval EFI_INVALID_PARAMETER ControllerHandle is not a valid EFI_HANDLE.
@retval EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a valid
EFI_HANDLE.
@retval EFI_INVALID_PARAMETER Language is NULL.
@retval EFI_INVALID_PARAMETER ControllerName is NULL.
@retval EFI_UNSUPPORTED The driver specified by This is not currently
managing the controller specified by
ControllerHandle and ChildHandle.
@retval EFI_UNSUPPORTED The driver specified by This does not support
the language specified by Language.
**/
EFI_STATUS
EFIAPI
ScsiBusComponentNameGetControllerName (
IN EFI_COMPONENT_NAME_PROTOCOL *This,
IN EFI_HANDLE ControllerHandle,
IN EFI_HANDLE ChildHandle OPTIONAL,
IN CHAR8 *Language,
OUT CHAR16 **ControllerName
);
/**
Retrieves the device type information of the SCSI Controller.
@param This Protocol instance pointer.
@param DeviceType A pointer to the device type information retrieved from
the SCSI Controller.
@retval EFI_SUCCESS Retrieves the device type information successfully.
@retval EFI_INVALID_PARAMETER The DeviceType is NULL.
**/
EFI_STATUS
EFIAPI
ScsiGetDeviceType (
IN EFI_SCSI_IO_PROTOCOL *This,
OUT UINT8 *DeviceType
);
/**
Retrieves the device location in the SCSI channel.
@param This Protocol instance pointer.
@param Target A pointer to the Target ID of a SCSI device
on the SCSI channel.
@param Lun A pointer to the LUN of the SCSI device on
the SCSI channel.
@retval EFI_SUCCESS Retrieves the device location successfully.
@retval EFI_INVALID_PARAMETER The Target or Lun is NULL.
**/
EFI_STATUS
EFIAPI
ScsiGetDeviceLocation (
IN EFI_SCSI_IO_PROTOCOL *This,
IN OUT UINT8 **Target,
OUT UINT64 *Lun
);
/**
Resets the SCSI Bus that the SCSI Controller is attached to.
@param This Protocol instance pointer.
@retval EFI_SUCCESS The SCSI bus is reset successfully.
@retval EFI_DEVICE_ERROR Errors encountered when resetting the SCSI bus.
@retval EFI_UNSUPPORTED The bus reset operation is not supported by the
SCSI Host Controller.
@retval EFI_TIMEOUT A timeout occurred while attempting to reset
the SCSI bus.
**/
EFI_STATUS
EFIAPI
ScsiResetBus (
IN EFI_SCSI_IO_PROTOCOL *This
);
/**
Resets the SCSI Controller that the device handle specifies.
@param This Protocol instance pointer.
@retval EFI_SUCCESS Reset the SCSI controller successfully.
@retval EFI_DEVICE_ERROR Errors are encountered when resetting the SCSI Controller.
@retval EFI_UNSUPPORTED The SCSI bus does not support a device reset operation.
@retval EFI_TIMEOUT A timeout occurred while attempting to reset the
SCSI Controller.
**/
EFI_STATUS
EFIAPI
ScsiResetDevice (
IN EFI_SCSI_IO_PROTOCOL *This
);
/**
Sends a SCSI Request Packet to the SCSI Controller for execution.
@param This Protocol instance pointer.
@param CommandPacket The SCSI request packet to send to the SCSI
Controller specified by the device handle.
@param Event If the SCSI bus where the SCSI device is attached
does not support non-blocking I/O, then Event is
ignored, and blocking I/O is performed.
If Event is NULL, then blocking I/O is performed.
If Event is not NULL and non-blocking I/O is
supported, then non-blocking I/O is performed,
and Event will be signaled when the SCSI Request
Packet completes.
@retval EFI_SUCCESS The SCSI Request Packet was sent by the host
successfully, and TransferLength bytes were
transferred to/from DataBuffer.See
HostAdapterStatus, TargetStatus,
SenseDataLength, and SenseData in that order
for additional status information.
@retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed,
but the entire DataBuffer could not be transferred.
The actual number of bytes transferred is returned
in TransferLength. See HostAdapterStatus,
TargetStatus, SenseDataLength, and SenseData in
that order for additional status information.
@retval EFI_NOT_READY The SCSI Request Packet could not be sent because
there are too many SCSI Command Packets already
queued.The caller may retry again later.
@retval EFI_DEVICE_ERROR A device error occurred while attempting to send
the SCSI Request Packet. See HostAdapterStatus,
TargetStatus, SenseDataLength, and SenseData in
that order for additional status information.
@retval EFI_INVALID_PARAMETER The contents of CommandPacket are invalid.
The SCSI Request Packet was not sent, so no
additional status information is available.
@retval EFI_UNSUPPORTED The command described by the SCSI Request Packet
is not supported by the SCSI initiator(i.e., SCSI
Host Controller). The SCSI Request Packet was not
sent, so no additional status information is
available.
@retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI
Request Packet to execute. See HostAdapterStatus,
TargetStatus, SenseDataLength, and SenseData in
that order for additional status information.
**/
EFI_STATUS
EFIAPI
ScsiExecuteSCSICommand (
IN EFI_SCSI_IO_PROTOCOL *This,
IN OUT EFI_SCSI_IO_SCSI_REQUEST_PACKET *CommandPacket,
IN EFI_EVENT Event OPTIONAL
);
/**
Scan SCSI Bus to discover the device, and attach ScsiIoProtocol to it.
@param This Protocol instance pointer
@param Controller Controller handle
@param TargetId Tartget to be scanned
@param Lun The Lun of the SCSI device on the SCSI channel.
@param ScsiBusDev The pointer of SCSI_BUS_DEVICE
@retval EFI_SUCCESS Successfully to discover the device and attach
ScsiIoProtocol to it.
@retval EFI_OUT_OF_RESOURCES Fail to discover the device.
**/
EFI_STATUS
EFIAPI
ScsiScanCreateDevice (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE Controller,
IN SCSI_TARGET_ID *TargetId,
IN UINT64 Lun,
IN OUT SCSI_BUS_DEVICE *ScsiBusDev
);
/**
Discovery SCSI Device
@param ScsiIoDevice The pointer of SCSI_IO_DEV
@retval TRUE Find SCSI Device and verify it.
@retval FALSE Unable to find SCSI Device.
**/
BOOLEAN
DiscoverScsiDevice (
IN OUT SCSI_IO_DEV *ScsiIoDevice
);
#endif