/** @file
  Implementations for Firmware Volume Block protocol.  
  
  It consumes FV HOBs and creates read-lonly Firmare Volume Block protocol 
  instances for each of them.

Copyright (c) 2006 - 2008, Intel Corporation. <BR>
All rights reserved. This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

**/

#include <DxeMain.h>


EFI_FW_VOL_BLOCK_DEVICE  mFwVolBlock = {
  FVB_DEVICE_SIGNATURE,
  NULL,
  {
    {
      {
        HARDWARE_DEVICE_PATH,
        HW_MEMMAP_DP,
        {
          (UINT8)(sizeof (MEMMAP_DEVICE_PATH)),
          (UINT8)(sizeof (MEMMAP_DEVICE_PATH) >> 8)
        }
      },
      EfiMemoryMappedIO,
      (EFI_PHYSICAL_ADDRESS) 0,
      (EFI_PHYSICAL_ADDRESS) 0,
    },
    {
      END_DEVICE_PATH_TYPE,
      END_ENTIRE_DEVICE_PATH_SUBTYPE,
      { 
        END_DEVICE_PATH_LENGTH,
        0
      }      
    },
  },
  {
    FwVolBlockGetAttributes,
    (EFI_FVB_SET_ATTRIBUTES)FwVolBlockSetAttributes,
    FwVolBlockGetPhysicalAddress,
    FwVolBlockGetBlockSize,
    FwVolBlockReadBlock,
    (EFI_FVB_WRITE)FwVolBlockWriteBlock,
    (EFI_FVB_ERASE_BLOCKS)FwVolBlockEraseBlock,
    NULL      
  },
  0,
  NULL,
  0,
  0
};



/**
  Retrieves Volume attributes.  No polarity translations are done.

  @param  This                   Calling context 
  @param  Attributes             output buffer which contains attributes 

  @retval EFI_SUCCESS            The firmware volume attributes were returned.

**/
EFI_STATUS
EFIAPI
FwVolBlockGetAttributes (
  IN CONST  EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL  *This,
  OUT       EFI_FVB_ATTRIBUTES                  *Attributes
  )
{
  EFI_FW_VOL_BLOCK_DEVICE               *FvbDevice;
  
  FvbDevice = FVB_DEVICE_FROM_THIS (This);

  //
  // Since we are read only, it's safe to get attributes data from our in-memory copy.
  //
  *Attributes = FvbDevice->FvbAttributes;

  return EFI_SUCCESS;
}



/**
  Modifies the current settings of the firmware volume according to the input parameter.

  @param  This                   Calling context 
  @param  Attributes             input buffer which contains attributes 

  @retval EFI_SUCCESS            The firmware volume attributes were returned. 
  @retval EFI_INVALID_PARAMETER  The attributes requested are in conflict with 
                                 the capabilities as declared in the firmware 
                                 volume header. 
  @retval EFI_UNSUPPORTED        Not supported.

**/
EFI_STATUS
EFIAPI
FwVolBlockSetAttributes (
  IN CONST  EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL  *This,
  IN CONST  EFI_FVB_ATTRIBUTES                  *Attributes
  )
{
  return EFI_UNSUPPORTED;
}



/**
  The EraseBlock() function erases one or more blocks as denoted by the
  variable argument list. The entire parameter list of blocks must be verified
  prior to erasing any blocks.  If a block is requested that does not exist
  within the associated firmware volume (it has a larger index than the last
  block of the firmware volume), the EraseBlock() function must return
  EFI_INVALID_PARAMETER without modifying the contents of the firmware volume.

  @param  This                   Calling context 
  @param  ...                    Starting LBA followed by Number of Lba to erase. 
                                 a -1 to terminate the list. 

  @retval EFI_SUCCESS            The erase request was successfully completed. 
  @retval EFI_ACCESS_DENIED      The firmware volume is in the WriteDisabled 
                                 state. 
  @retval EFI_DEVICE_ERROR       The block device is not functioning correctly 
                                 and could not be written. The firmware device 
                                 may have been partially erased. 
  @retval EFI_INVALID_PARAMETER  One or more of the LBAs listed in the variable 
                                 argument list do 
  @retval EFI_UNSUPPORTED        Not supported.

**/
EFI_STATUS
EFIAPI
FwVolBlockEraseBlock (
  IN EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL    *This,
  ...
  )
{
  return EFI_UNSUPPORTED;
}



/**
  Read the specified number of bytes from the block to the input buffer.

  @param  This                   Indicates the calling context. 
  @param  Lba                    The starting logical block index to read. 
  @param  Offset                 Offset into the block at which to begin reading. 
  @param  NumBytes               Pointer to a UINT32. At entry, *NumBytes 
                                 contains the total size of the buffer. At exit, 
                                 *NumBytes contains the total number of bytes 
                                 actually read. 
  @param  Buffer                 Pinter to a caller-allocated buffer that 
                                 contains the destine for the read. 

  @retval EFI_SUCCESS            The firmware volume was read successfully. 
  @retval EFI_BAD_BUFFER_SIZE    The read was attempted across an LBA boundary. 
  @retval EFI_ACCESS_DENIED      Access denied. 
  @retval EFI_DEVICE_ERROR       The block device is malfunctioning and could not 
                                 be read.

**/
EFI_STATUS
EFIAPI
FwVolBlockReadBlock (
  IN CONST  EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL   *This,
  IN CONST  EFI_LBA                              Lba,
  IN CONST  UINTN                                Offset,
  IN OUT    UINTN                                *NumBytes,
  IN OUT    UINT8                                *Buffer
  )
{
  EFI_FW_VOL_BLOCK_DEVICE               *FvbDevice;
  EFI_FIRMWARE_VOLUME_HEADER            *FwVolHeader;
  UINT8                                 *LbaOffset;
  UINTN                                 LbaStart;
  UINTN                                 NumOfBytesRead;
  UINTN                                 LbaIndex;
  
  FvbDevice = FVB_DEVICE_FROM_THIS (This);

  //
  // Check if This FW can be read
  //
  if ((FvbDevice->FvbAttributes & EFI_FVB2_READ_STATUS) == 0) {
    return EFI_ACCESS_DENIED;
  }
  
  LbaIndex = (UINTN) Lba;
  if (LbaIndex >= FvbDevice->NumBlocks) {
    //
    // Invalid Lba, read nothing.
    //
    *NumBytes = 0;
    return EFI_BAD_BUFFER_SIZE;
  }
  
  if (Offset > FvbDevice->LbaCache[LbaIndex].Length) {
    //
    // all exceed boundry, read nothing.
    //
    *NumBytes = 0;
    return EFI_BAD_BUFFER_SIZE;
  }
  
  NumOfBytesRead = *NumBytes;
  if (Offset + NumOfBytesRead > FvbDevice->LbaCache[LbaIndex].Length) {
    //
    // partial exceed boundry, read data from current postion to end.
    //
    NumOfBytesRead = FvbDevice->LbaCache[LbaIndex].Length - Offset;
  }
  
  LbaStart = FvbDevice->LbaCache[LbaIndex].Base;
  FwVolHeader = (EFI_FIRMWARE_VOLUME_HEADER *)((UINTN) FvbDevice->BaseAddress);
  LbaOffset = (UINT8 *) FwVolHeader + LbaStart + Offset;

  //
  // Perform read operation
  //
  CopyMem (Buffer, LbaOffset, NumOfBytesRead);
  
  if (NumOfBytesRead == *NumBytes) {
    return EFI_SUCCESS;
  }
    
  *NumBytes = NumOfBytesRead;
  return EFI_BAD_BUFFER_SIZE;
}
  


/**
  Writes the specified number of bytes from the input buffer to the block.

  @param  This                   Indicates the calling context. 
  @param  Lba                    The starting logical block index to write to. 
  @param  Offset                 Offset into the block at which to begin writing. 
  @param  NumBytes               Pointer to a UINT32. At entry, *NumBytes 
                                 contains the total size of the buffer. At exit, 
                                 *NumBytes contains the total number of bytes 
                                 actually written. 
  @param  Buffer                 Pinter to a caller-allocated buffer that 
                                 contains the source for the write. 

  @retval EFI_SUCCESS            The firmware volume was written successfully. 
  @retval EFI_BAD_BUFFER_SIZE    The write was attempted across an LBA boundary. 
                                 On output, NumBytes contains the total number of 
                                 bytes actually written. 
  @retval EFI_ACCESS_DENIED      The firmware volume is in the WriteDisabled 
                                 state. 
  @retval EFI_DEVICE_ERROR       The block device is malfunctioning and could not 
                                 be written. 
  @retval EFI_UNSUPPORTED        Not supported.

**/
EFI_STATUS
EFIAPI
FwVolBlockWriteBlock (
  IN     EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL   *This,
  IN     EFI_LBA                              Lba,
  IN     UINTN                                Offset,
  IN OUT UINTN                                *NumBytes,
  IN     UINT8                                *Buffer
  )
{
  return EFI_UNSUPPORTED;
}
 


/**
  Get Fvb's base address.

  @param  This                   Indicates the calling context. 
  @param  Address                Fvb device base address. 

  @retval EFI_SUCCESS            Successfully got Fvb's base address. 
  @retval EFI_UNSUPPORTED        Not supported.

**/
EFI_STATUS
EFIAPI
FwVolBlockGetPhysicalAddress (
  IN CONST  EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL  *This,
  OUT       EFI_PHYSICAL_ADDRESS                *Address
  )
{
  EFI_FW_VOL_BLOCK_DEVICE               *FvbDevice;
  
  FvbDevice = FVB_DEVICE_FROM_THIS (This);
  
  if (FvbDevice->FvbAttributes & EFI_FVB2_MEMORY_MAPPED) {
    *Address = FvbDevice->BaseAddress;
    return EFI_SUCCESS;
  }
  
  return EFI_UNSUPPORTED;
}



/**
  Retrieves the size in bytes of a specific block within a firmware volume.

  @param  This                   Indicates the calling context. 
  @param  Lba                    Indicates the block for which to return the 
                                 size. 
  @param  BlockSize              Pointer to a caller-allocated UINTN in which the 
                                 size of the block is returned. 
  @param  NumberOfBlocks         Pointer to a caller-allocated UINTN in which the 
                                 number of consecutive blocks starting with Lba 
                                 is returned. All blocks in this range have a 
                                 size of BlockSize. 

  @retval EFI_SUCCESS            The firmware volume base address is returned. 
  @retval EFI_INVALID_PARAMETER  The requested LBA is out of range.

**/
EFI_STATUS
EFIAPI
FwVolBlockGetBlockSize (
  IN CONST  EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL  *This,
  IN CONST  EFI_LBA                             Lba,
  IN OUT    UINTN                               *BlockSize,
  IN OUT    UINTN                               *NumberOfBlocks
  )
{
  UINTN                                 TotalBlocks;
  EFI_FW_VOL_BLOCK_DEVICE               *FvbDevice;
  EFI_FV_BLOCK_MAP_ENTRY                *PtrBlockMapEntry;
  EFI_FIRMWARE_VOLUME_HEADER            *FwVolHeader;
  
  FvbDevice = FVB_DEVICE_FROM_THIS (This);
  
  //
  // Do parameter checking
  //
  if (Lba >= FvbDevice->NumBlocks) {
    return EFI_INVALID_PARAMETER;
  }
  
  FwVolHeader = (EFI_FIRMWARE_VOLUME_HEADER *)((UINTN)FvbDevice->BaseAddress);
  
  PtrBlockMapEntry = FwVolHeader->BlockMap;
  
  //
  // Search the block map for the given block
  //
  TotalBlocks = 0;
  while ((PtrBlockMapEntry->NumBlocks != 0) || (PtrBlockMapEntry->Length !=0 )) {
    TotalBlocks += PtrBlockMapEntry->NumBlocks;
    if (Lba < TotalBlocks) {
      //
      // We find the range
      //
      break;
    }
    
    PtrBlockMapEntry++;
  }
  
  *BlockSize = PtrBlockMapEntry->Length;
  *NumberOfBlocks = TotalBlocks - (UINTN)Lba;
  
  return EFI_SUCCESS;
}



/**
  This routine produces a firmware volume block protocol on a given
  buffer.

  @param  BaseAddress            base address of the firmware volume image 
  @param  Length                 length of the firmware volume image 
  @param  ParentHandle           handle of parent firmware volume, if this image 
                                 came from an FV image file in another firmware 
                                 volume (ala capsules) 
  @param  FvProtocol             Firmware volume block protocol produced. 

  @retval EFI_VOLUME_CORRUPTED   Volume corrupted. 
  @retval EFI_OUT_OF_RESOURCES   No enough buffer to be allocated. 
  @retval EFI_SUCCESS            Successfully produced a FVB protocol on given 
                                 buffer.

**/
EFI_STATUS
ProduceFVBProtocolOnBuffer (
  IN EFI_PHYSICAL_ADDRESS   BaseAddress,
  IN UINT64                 Length,
  IN EFI_HANDLE             ParentHandle,
  OUT EFI_HANDLE            *FvProtocol  OPTIONAL
  )
{
  EFI_STATUS                    Status;
  EFI_FW_VOL_BLOCK_DEVICE       *FvbDev;
  EFI_FIRMWARE_VOLUME_HEADER    *FwVolHeader;
  UINTN                         BlockIndex;
  UINTN                         BlockIndex2;
  UINTN                         LinearOffset;
  UINT32                        FvAlignment;
  EFI_FV_BLOCK_MAP_ENTRY        *PtrBlockMapEntry;
  
  FvAlignment = 0;
  FwVolHeader = (EFI_FIRMWARE_VOLUME_HEADER *)(UINTN) BaseAddress;
  //
  // Validate FV Header, if not as expected, return
  //
  if (FwVolHeader->Signature != EFI_FVH_SIGNATURE) {
    return EFI_VOLUME_CORRUPTED;
  }
  //
  // Get FvHeader alignment
  //
  FvAlignment = 1 << ((FwVolHeader->Attributes & EFI_FVB2_ALIGNMENT) >> 16);
  if (FvAlignment < 8) {
    FvAlignment = 8;
  }
  if ((UINTN)BaseAddress % FvAlignment != 0) {
    //
    // FvImage buffer is not at its required alignment.
    //
    return EFI_VOLUME_CORRUPTED;
  }
  //
  // Allocate EFI_FW_VOL_BLOCK_DEVICE 
  //
  FvbDev = CoreAllocateCopyPool (sizeof (EFI_FW_VOL_BLOCK_DEVICE), &mFwVolBlock);
  if (FvbDev == NULL) {
    return EFI_OUT_OF_RESOURCES;
  }

  FvbDev->BaseAddress   = BaseAddress;
  FvbDev->FvbAttributes = FwVolHeader->Attributes;
  FvbDev->FwVolBlockInstance.ParentHandle = ParentHandle;

  //
  // Init the block caching fields of the device
  // First, count the number of blocks
  //
  FvbDev->NumBlocks = 0;
  for (PtrBlockMapEntry = FwVolHeader->BlockMap;
       PtrBlockMapEntry->NumBlocks != 0;
       PtrBlockMapEntry++) {
    FvbDev->NumBlocks += PtrBlockMapEntry->NumBlocks;
  }
  //
  // Second, allocate the cache
  //
  FvbDev->LbaCache = CoreAllocateBootServicesPool (FvbDev->NumBlocks * sizeof (LBA_CACHE));
  if (FvbDev->LbaCache == NULL) {
    CoreFreePool (FvbDev);
    return EFI_OUT_OF_RESOURCES;
  }
  //
  // Last, fill in the cache with the linear address of the blocks
  //
  BlockIndex = 0;
  LinearOffset = 0;
  for (PtrBlockMapEntry = FwVolHeader->BlockMap;
       PtrBlockMapEntry->NumBlocks != 0; PtrBlockMapEntry++) {
    for (BlockIndex2 = 0; BlockIndex2 < PtrBlockMapEntry->NumBlocks; BlockIndex2++) {
      FvbDev->LbaCache[BlockIndex].Base = LinearOffset;
      FvbDev->LbaCache[BlockIndex].Length = PtrBlockMapEntry->Length;
      LinearOffset += PtrBlockMapEntry->Length;
      BlockIndex++;
    }
  }

  //
  // Set up the devicepath
  //
  FvbDev->DevicePath.MemMapDevPath.StartingAddress = BaseAddress;
  FvbDev->DevicePath.MemMapDevPath.EndingAddress = BaseAddress + FwVolHeader->FvLength - 1;

  //
  //
  // Attach FvVolBlock Protocol to new handle
  //
  Status = CoreInstallMultipleProtocolInterfaces (
             &FvbDev->Handle,
             &gEfiFirmwareVolumeBlockProtocolGuid,     &FvbDev->FwVolBlockInstance,
             &gEfiDevicePathProtocolGuid,              &FvbDev->DevicePath,
             &gEfiFirmwareVolumeDispatchProtocolGuid,  NULL,
             NULL
             );

  //
  // If they want the handle back, set it.
  //
  if (FvProtocol != NULL) {
    *FvProtocol = FvbDev->Handle;
  }

  return Status;
}



/**
  This routine is the driver initialization entry point.  It initializes the
  libraries, consumes FV hobs and NT_NON_MM_FV environment variable and
  produces instances of FW_VOL_BLOCK_PROTOCOL as appropriate.

  @param  ImageHandle            The image handle. 
  @param  SystemTable            The system table. 

  @retval EFI_SUCCESS            Successfully initialized firmware volume block 
                                 driver.

**/
EFI_STATUS
EFIAPI
FwVolBlockDriverInit (
  IN EFI_HANDLE                 ImageHandle,
  IN EFI_SYSTEM_TABLE           *SystemTable
  )
{
  EFI_PEI_HOB_POINTERS          FvHob;

  //
  // Core Needs Firmware Volumes to function
  //
  FvHob.Raw = GetHobList ();
  while ((FvHob.Raw = GetNextHob (EFI_HOB_TYPE_FV, FvHob.Raw)) != NULL) {
    //
    // Produce an FVB protocol for it
    //
    ProduceFVBProtocolOnBuffer (FvHob.FirmwareVolume->BaseAddress, FvHob.FirmwareVolume->Length, NULL, NULL);    
    FvHob.Raw = GET_NEXT_HOB (FvHob);
  }

  return EFI_SUCCESS;
}



/**
  This DXE service routine is used to process a firmware volume. In
  particular, it can be called by BDS to process a single firmware
  volume found in a capsule.

  @param  FvHeader               pointer to a firmware volume header 
  @param  Size                   the size of the buffer pointed to by FvHeader 
  @param  FVProtocolHandle       the handle on which a firmware volume protocol 
                                 was produced for the firmware volume passed in. 

  @retval EFI_OUT_OF_RESOURCES   if an FVB could not be produced due to lack of  
                                 system resources 
  @retval EFI_VOLUME_CORRUPTED   if the volume was corrupted 
  @retval EFI_SUCCESS            a firmware volume protocol was produced for the 
                                 firmware volume

**/
EFI_STATUS
CoreProcessFirmwareVolume (
  IN VOID                             *FvHeader,
  IN UINTN                            Size, 
  OUT EFI_HANDLE                      *FVProtocolHandle
  )
{
  VOID        *Ptr;
  EFI_STATUS  Status;

  *FVProtocolHandle = NULL;
  Status = ProduceFVBProtocolOnBuffer ( 
            (EFI_PHYSICAL_ADDRESS) (UINTN) FvHeader, 
            (UINT64)Size, 
            NULL, 
            FVProtocolHandle
            );
  //
  // Since in our implementation we use register-protocol-notify to put a
  // FV protocol on the FVB protocol handle, we can't directly verify that
  // the FV protocol was produced. Therefore here we will check the handle
  // and make sure an FV protocol is on it. This indicates that all went 
  // well. Otherwise we have to assume that the volume was corrupted 
  // somehow.
  //
  if (!EFI_ERROR(Status)) {
    Ptr = NULL;
    Status = CoreHandleProtocol (*FVProtocolHandle, &gEfiFirmwareVolume2ProtocolGuid, (VOID **) &Ptr);
    if (EFI_ERROR(Status) || (Ptr == NULL)) {
      return EFI_VOLUME_CORRUPTED;
    }
    return EFI_SUCCESS;
  }
  return Status;
}