/*- * Copyright (c) 1990, 1993 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * Chris Torek. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)stdio.h 8.5 (Berkeley) 4/29/95 */ /* $NetBSD: stdio.h,v 1.66.2.3 2007/08/24 20:07:38 liamjfoy Exp $ */ #ifndef _STDIO_H_ #define _STDIO_H_ #include #include #include #include #ifdef _EFI_SIZE_T_ typedef _EFI_SIZE_T_ size_t; #undef _EFI_SIZE_T_ #endif /* * This is fairly grotesque, but pure ANSI code must not inspect the * innards of an fpos_t anyway. The library internally uses off_t, * which we assume is exactly as big as eight chars. */ #if (!defined(_ANSI_SOURCE) && !defined(__STRICT_ANSI__)) || defined(_LIBC) typedef __off_t fpos_t; #else typedef struct __sfpos { __off_t _pos; } fpos_t; #endif #define _FSTDIO /* Define for new stdio with functions. */ /* * NB: to fit things in six character monocase externals, the stdio * code uses the prefix `__s' for stdio objects, typically followed * by a three-character attempt at a mnemonic. */ /* stdio buffers */ struct __sbuf { unsigned char *_base; int _size; }; /* * stdio state variables. * * The following always hold: * * if (_flags&(__SLBF|__SWR)) == (__SLBF|__SWR), * _lbfsize is -_bf._size, else _lbfsize is 0 * if _flags&__SRD, _w is 0 * if _flags&__SWR, _r is 0 * * This ensures that the getc and putc macros (or inline functions) never * try to write or read from a file that is in `read' or `write' mode. * (Moreover, they can, and do, automatically switch from read mode to * write mode, and back, on "r+" and "w+" files.) * * _lbfsize is used only to make the inline line-buffered output stream * code as compact as possible. * * _ub, _up, and _ur are used when ungetc() pushes back more characters * than fit in the current _bf, or when ungetc() pushes back a character * that does not match the previous one in _bf. When this happens, * _ub._base becomes non-nil (i.e., a stream has ungetc() data iff * _ub._base!=NULL) and _up and _ur save the current values of _p and _r. * * NB: see WARNING above before changing the layout of this structure! */ typedef struct __sFILE { unsigned char *_p; /* current position in (some) buffer */ int _r; /* read space left for getc() */ int _w; /* write space left for putc() */ unsigned short _flags; /* flags, below; this FILE is free if 0 */ short _file; /* fileno, if Unix descriptor, else -1 */ struct __sbuf _bf; /* the buffer (at least 1 byte, if !NULL) */ int _lbfsize; /* 0 or -_bf._size, for inline putc */ /* operations */ void *_cookie; /* cookie passed to io functions */ int (*_close)(void *); int (*_read) (void *, char *, int); fpos_t (*_seek) (void *, fpos_t, int); int (*_write)(void *, const char *, int); /* file extension */ struct __sbuf _ext; /* separate buffer for long sequences of ungetc() */ unsigned char *_up; /* saved _p when _p is doing ungetc data */ int _ur; /* saved _r when _r is counting ungetc data */ /* tricks to meet minimum requirements even when malloc() fails */ unsigned char _ubuf[3]; /* guarantee an ungetc() buffer */ unsigned char _nbuf[1]; /* guarantee a getc() buffer */ /* separate buffer for fgetln() when line crosses buffer boundary */ struct __sbuf _lb; /* buffer for fgetln() */ /* Unix stdio files get aligned to block boundaries on fseek() */ int _blksize; /* stat.st_blksize (may be != _bf._size) */ fpos_t _offset; /* current lseek offset */ } FILE; __BEGIN_DECLS extern FILE __sF[]; __END_DECLS #define __SLBF 0x0001 /* line buffered */ #define __SNBF 0x0002 /* unbuffered */ #define __SRD 0x0004 /* OK to read */ #define __SWR 0x0008 /* OK to write */ /* RD and WR are never simultaneously asserted */ #define __SRW 0x0010 /* open for reading & writing */ #define __SEOF 0x0020 /* found EOF */ #define __SERR 0x0040 /* found error */ #define __SMBF 0x0080 /* _buf is from malloc */ #define __SAPP 0x0100 /* fdopen()ed in append mode */ #define __SSTR 0x0200 /* this is an sprintf/snprintf string */ #define __SOPT 0x0400 /* do fseek() optimization */ #define __SNPT 0x0800 /* do not do fseek() optimization */ #define __SOFF 0x1000 /* set iff _offset is in fact correct */ #define __SMOD 0x2000 /* true => fgetln modified _p text */ #define __SALC 0x4000 /* allocate string space dynamically */ /* * The following three definitions are for ANSI C, which took them * from System V, which brilliantly took internal interface macros and * made them official arguments to setvbuf(), without renaming them. * Hence, these ugly _IOxxx names are *supposed* to appear in user code. * * Although numbered as their counterparts above, the implementation * does not rely on this. */ #define _IOFBF 0 /* setvbuf should set fully buffered */ #define _IOLBF 1 /* setvbuf should set line buffered */ #define _IONBF 2 /* setvbuf should set unbuffered */ #define BUFSIZ 1024 /* size of buffer used by setbuf */ #define EOF (-1) /* * FOPEN_MAX is a minimum maximum, and is the number of streams that * stdio can provide without attempting to allocate further resources * (which could fail). Do not use this for anything. */ #define FOPEN_MAX OPEN_MAX /* must be <= OPEN_MAX */ #define FILENAME_MAX PATH_MAX /* must be <= PATH_MAX */ #define L_tmpnam PATH_MAX /* must be == PATH_MAX */ #ifndef TMP_MAX #define TMP_MAX 308915776 /* Legacy */ #endif /* Always ensure that these are consistent with ! */ #ifndef SEEK_SET #define SEEK_SET 0 /* set file offset to offset */ #endif #ifndef SEEK_CUR #define SEEK_CUR 1 /* set file offset to current plus offset */ #endif #ifndef SEEK_END #define SEEK_END 2 /* set file offset to EOF plus offset */ #endif #define stdin (&__sF[0]) #define stdout (&__sF[1]) #define stderr (&__sF[2]) /* * Functions defined in ANSI C standard. */ __BEGIN_DECLS void clearerr(FILE *); int fclose (FILE *); int feof (FILE *); int ferror (FILE *); int fflush (FILE *); int fgetc (FILE *); int fgetpos (FILE * __restrict, fpos_t * __restrict); char *fgets (char * __restrict, int, FILE * __restrict); FILE *fopen (const char * __restrict , const char * __restrict); /** The fprintf function writes output to the stream pointed to by stream, under control of the string pointed to by format that specifies how subsequent arguments are converted for output. If there are insufficient arguments for the format, the behavior is undefined. If the format is exhausted while arguments remain, the excess arguments are evaluated (as always) but are otherwise ignored. The fprintf function returns when the end of the format string is encountered. The format shall be a multibyte character sequence, beginning and ending in its initial shift state. The format is composed of zero or more directives: ordinary multibyte characters (not %), which are copied unchanged to the output stream; and conversion specifications, each of which results in fetching zero or more subsequent arguments, converting them, if applicable, according to the corresponding conversion specifier, and then writing the result to the output stream. Each conversion specification is introduced by the character %. After the %, the following appear in sequence: - Zero or more flags (in any order) that modify the meaning of the conversion specification. - An optional minimum field width. If the converted value has fewer characters than the field width, it is padded with spaces (by default) on the left (or right, if the left adjustment flag, described later, has been given) to the field width. The field width takes the form of an asterisk * (described later) or a nonnegative decimal integer. - An optional precision that gives the minimum number of digits to appear for the d, i, o, u, x, and X conversions, the number of digits to appear after the decimal-point character for e, E, f, and F conversions, the maximum number of significant digits for the g and G conversions, or the maximum number of bytes to be written for s conversions. The precision takes the form of a period (.) followed either by an asterisk * (described later) or by an optional decimal integer; if only the period is specified, the precision is taken as zero. If a precision appears with any other conversion specifier, the behavior is undefined. - An optional length modifier that specifies the size of the argument. - A conversion specifier character that specifies the type of conversion to be applied. As noted above, a field width, or precision, or both, may be indicated by an asterisk. In this case, an int argument supplies the field width or precision. The arguments specifying field width, or precision, or both, shall appear (in that order) before the argument (if any) to be converted. A negative field width argument is taken as a - flag followed by a positive field width. A negative precision argument is taken as if the precision were omitted. The flag characters and their meanings are: - The result of the conversion is left-justified within the field. (It is right-justified if this flag is not specified.) + The result of a signed conversion always begins with a plus or minus sign. (It begins with a sign only when a negative value is converted if this flag is not specified.) space If the first character of a signed conversion is not a sign, or if a signed conversion results in no characters, a space is prefixed to the result. If the space and + flags both appear, the space flag is ignored. # The result is converted to an "alternative form". For o conversion, it increases the precision, if and only if necessary, to force the first digit of the result to be a zero (if the value and precision are both 0, a single 0 is printed). For x (or X) conversion, a nonzero result has 0x (or 0X) prefixed to it. For e, E, f, F, g, and G conversions, the result of converting a floating-point number always contains a decimal-point character, even if no digits follow it. (Normally, a decimal-point character appears in the result of these conversions only if a digit follows it.) For g and G conversions, trailing zeros are not removed from the result. For other conversions, the behavior is undefined. 0 For d, i, o, u, x, X, e, E, f, F, g, and G conversions, leading zeros (following any indication of sign or base) are used to pad to the field width rather than performing space padding, except when converting an infinity or NaN. If the 0 and - flags both appear, the 0 flag is ignored. For d, i, o, u, x, and X conversions, if a precision is specified, the 0 flag is ignored. For other conversions, the behavior is undefined. The length modifiers and their meanings are: hh Specifies that a following d, i, o, u, x, or X conversion specifier applies to a signed char or unsigned char argument (the argument will have been promoted according to the integer promotions, but its value shall be converted to signed char or unsigned char before printing); or that a following n conversion specifier applies to a pointer to a signed char argument. h Specifies that a following d, i, o, u, x, or X conversion specifier applies to a short int or unsigned short int argument (the argument will have been promoted according to the integer promotions, but its value shall be converted to short int or unsigned short int before printing); or that a following n conversion specifier applies to a pointer to a short int argument. l (ell) Specifies that a following d, i, o, u, x, or X conversion specifier applies to a long int or unsigned long int argument; that a following n conversion specifier applies to a pointer to a long int argument; that a following c conversion specifier applies to a wint_t argument; that a following s conversion specifier applies to a pointer to a wchar_t argument; or has no effect on a following e, E, f, F, g, or G conversion specifier. ll (ell-ell) Specifies that a following d, i, o, u, x, or X conversion specifier applies to a long long int or unsigned long long int argument; or that a following n conversion specifier applies to a pointer to a long long int argument. j Specifies that a following d, i, o, u, x, or X conversion specifier applies to an intmax_t or uintmax_t argument; or that a following n conversion specifier applies to a pointer to an intmax_t argument. z Specifies that a following d, i, o, u, x, or X conversion specifier applies to a size_t or the corresponding signed integer type argument; or that a following n conversion specifier applies to a pointer to a signed integer type corresponding to size_t argument. t Specifies that a following d, i, o, u, x, or X conversion specifier applies to a ptrdiff_t or the corresponding unsigned integer type argument; or that a following n conversion specifier applies to a pointer to a ptrdiff_t argument. L Specifies that a following e, E, f, F, g, or G conversion specifier applies to a long double argument. If a length modifier appears with any conversion specifier other than as specified above, the behavior is undefined. The conversion specifiers and their meanings are: d,i The int argument is converted to signed decimal in the style [-]dddd. The precision specifies the minimum number of digits to appear; if the value being converted can be represented in fewer digits, it is expanded with leading zeros. The default precision is 1. The result of converting a zero value with a precision of zero is no characters. o,u,x,X The unsigned int argument is converted to unsigned octal (o), unsigned decimal (u), or unsigned hexadecimal notation (x or X) in the style dddd; the letters abcdef are used for x conversion and the letters ABCDEF for X conversion. The precision specifies the minimum number of digits to appear; if the value being converted can be represented in fewer digits, it is expanded with leading zeros. The default precision is 1. The result of converting a zero value with a precision of zero is no characters. f,F A double argument representing a floating-point number is converted to decimal notation in the style [-]ddd.ddd, where the number of digits after the decimal-point character is equal to the precision specification. If the precision is missing, it is taken as 6; if the precision is zero and the # flag is not specified, no decimal-point character appears. If a decimal-point character appears, at least one digit appears before it. The value is rounded to the appropriate number of digits. A double argument representing an infinity is converted in one of the styles [-]inf or [-]infinity - which style is implementation-defined. A double argument representing a NaN is converted in one of the styles [-]nan or [-]nan(n-char-sequence) - which style, and the meaning of any n-char-sequence, is implementation-defined. The F conversion specifier produces INF, INFINITY, or NAN instead of inf, infinity, or nan, respectively. e,E A double argument representing a floating-point number is converted in the style [-]d.ddd e[+-]dd, where there is one digit (which is nonzero if the argument is nonzero) before the decimal-point character and the number of digits after it is equal to the precision; if the precision is missing, it is taken as 6; if the precision is zero and the # flag is not specified, no decimal-point character appears. The value is rounded to the appropriate number of digits. The E conversion specifier produces a number with E instead of e introducing the exponent. The exponent always contains at least two digits, and only as many more digits as necessary to represent the exponent. If the value is zero, the exponent is zero. A double argument representing an infinity or NaN is converted in the style of an f or F conversion specifier. g,G A double argument representing a floating-point number is converted in style f or e (or in style F or E in the case of a G conversion specifier), depending on the value converted and the precision. Let P equal the precision if nonzero, 6 if the precision is omitted, or 1 if the precision is zero. Then, if a conversion with style E would have an exponent of X: - if P > X = -4, the conversion is with style f (or F) and precision P - (X + 1). - otherwise, the conversion is with style e (or E) and precision P - 1. Finally, unless the # flag is used, any trailing zeros are removed from the fractional portion of the result and the decimal-point character is removed if there is no fractional portion remaining. A double argument representing an infinity or NaN is converted in the style of an f or F conversion specifier. c If no l length modifier is present, the int argument is converted to an unsigned char, and the resulting character is written. If an l length modifier is present, the wint_t argument is converted as if by an ls conversion specification with no precision and an argument that points to the initial element of a two-element array of wchar_t, the first element containing the wint_t argument to the lc conversion specification and the second a null wide character. s If no l length modifier is present, the argument is a pointer to the initial element of an array of character type. Characters from the array are written up to (but not including) the terminating null character. If the precision is specified, no more than that many bytes are written. If the precision is not specified or is greater than the size of the array, the array shall contain a null character. If an l length modifier is present, the argument shall be a pointer to the initial element of an array of wchar_t type. Wide characters from the array are converted to multibyte characters (each as if by a call to the wcrtomb function, with the conversion state described by an mbstate_t object initialized to zero before the first wide character is converted) up to and including a terminating null wide character. The resulting multibyte characters are written up to (but not including) the terminating null character (byte). If no precision is specified, the array shall contain a null wide character. If a precision is specified, no more than that many bytes are written (including shift sequences, if any), and the array shall contain a null wide character if, to equal the multibyte character sequence length given by the precision, the function would need to access a wide character one past the end of the array. In no case is a partial multibyte character written. p The argument shall be a pointer to void. The value of the pointer is converted to a sequence of printing characters, in an implementation-defined manner. n The argument shall be a pointer to signed integer into which is written the number of characters written to the output stream so far by this call to fprintf. No argument is converted, but one is consumed. If the conversion specification includes any flags, a field width, or a precision, the behavior is undefined. % A % character is written. No argument is converted. The complete conversion specification shall be %%. In no case does a nonexistent or small field width cause truncation of a field; if the result of a conversion is wider than the field width, the field is expanded to contain the conversion result. @param[in] stream An open File specifier to which the output is sent. @param[in] format A multi-byte character sequence containing characters to be copied unchanged, and conversion specifiers which convert their associated arguments. Copied and converted characters are sent to the output stream. @param ... Variable number of parameters as required by format. @return The fprintf function returns the number of characters transmitted, or a negative value if an output or encoding error occurred. **/ int fprintf (FILE * __restrict stream, const char * __restrict format, ...); int fputc (int, FILE *); int fputs (const char * __restrict, FILE * __restrict); size_t fread (void * __restrict, size_t, size_t, FILE * __restrict); FILE *freopen (const char * __restrict, const char * __restrict, FILE * __restrict); int fscanf (FILE * __restrict, const char * __restrict, ...); int fseek (FILE *, long, int); int fsetpos (FILE *, const fpos_t *); long ftell (FILE *); size_t fwrite (const void * __restrict, size_t, size_t, FILE * __restrict); int getc (FILE *); int getchar (void); void perror (const char *); int printf (const char * __restrict, ...); int putc (int, FILE *); int putchar (int); int puts (const char *); int remove (const char *); void rewind (FILE *); int scanf (const char * __restrict, ...); void setbuf (FILE * __restrict, char * __restrict); int setvbuf (FILE * __restrict, char * __restrict, int, size_t); int sscanf (const char * __restrict, const char * __restrict, ...); FILE *tmpfile (void); int ungetc (int, FILE *); int vfprintf(FILE * __restrict, const char * __restrict, _BSD_VA_LIST_); int vprintf (const char * __restrict, _BSD_VA_LIST_); #ifndef __AUDIT__ char *gets (char *); int sprintf (char * __restrict, const char * __restrict, ...); char *tmpnam (char *); int vsprintf(char * __restrict, const char * __restrict, _BSD_VA_LIST_); #endif #if defined(_POSIX_C_SOURCE) || defined(_XOPEN_SOURCE) int rename (const char *, const char *) __RENAME(__posix_rename); #else int rename (const char *, const char *); #endif __END_DECLS /* * IEEE Std 1003.1-90 */ #if defined(_POSIX_C_SOURCE) || defined(_XOPEN_SOURCE) || \ defined(_NETBSD_SOURCE) #define L_ctermid 1024 /* size for ctermid(); PATH_MAX */ #define L_cuserid 9 /* size for cuserid(); UT_NAMESIZE + 1 */ __BEGIN_DECLS char *ctermid(char *); #ifndef __CUSERID_DECLARED #define __CUSERID_DECLARED /* also declared in unistd.h */ char *cuserid(char *); #endif /* __CUSERID_DECLARED */ FILE *fdopen(int, const char *); int fileno(FILE *); __END_DECLS #endif /* not ANSI */ /* * IEEE Std 1003.1c-95, also adopted by X/Open CAE Spec Issue 5 Version 2 */ #if (_POSIX_C_SOURCE - 0) >= 199506L || (_XOPEN_SOURCE - 0) >= 500 || \ defined(_REENTRANT) || defined(_NETBSD_SOURCE) __BEGIN_DECLS void flockfile (FILE *); int ftrylockfile (FILE *); void funlockfile (FILE *); int getc_unlocked (FILE *); int getchar_unlocked(void); int putc_unlocked (int, FILE *); int putchar_unlocked(int); __END_DECLS #endif /* _POSIX_C_SOURCE >= 1995056 || _XOPEN_SOURCE >= 500 || ... */ /* * Functions defined in POSIX 1003.2 and XPG2 or later. */ #if (_POSIX_C_SOURCE - 0) >= 2 || (_XOPEN_SOURCE - 0) >= 2 || \ defined(_NETBSD_SOURCE) __BEGIN_DECLS int pclose (FILE *); FILE *popen (const char *, const char *); __END_DECLS #endif /* * Functions defined in ISO XPG4.2, ISO C99, POSIX 1003.1-2001 or later. */ #if ((__STDC_VERSION__ - 0) >= 199901L) || \ ((_POSIX_C_SOURCE - 0) >= 200112L) || \ (defined(_XOPEN_SOURCE) && defined(_XOPEN_SOURCE_EXTENDED)) || \ ((_XOPEN_SOURCE - 0) >= 500) || \ defined(_ISOC99_SOURCE) || defined(_NETBSD_SOURCE) __BEGIN_DECLS int snprintf (char * __restrict, size_t, const char * __restrict, ...) __attribute__((__format__(__printf__, 3, 4))); int vsnprintf(char * __restrict, size_t, const char * __restrict, _BSD_VA_LIST_) __attribute__((__format__(__printf__, 3, 0))); __END_DECLS #endif /* * Functions defined in XPG4.2. */ #if defined(_XOPEN_SOURCE) || defined(_NETBSD_SOURCE) __BEGIN_DECLS int getw(FILE *); int putw(int, FILE *); char *mkdtemp(char *); int mkstemp(char *); char *mktemp(char *); #ifndef __AUDIT__ char *tempnam(const char *, const char *); #endif __END_DECLS #endif /* * X/Open CAE Specification Issue 5 Version 2 */ #ifndef off_t typedef __off_t off_t; #define off_t __off_t #endif /* off_t */ __BEGIN_DECLS int fseeko(FILE *, off_t, int); off_t ftello(FILE *); __END_DECLS /* * Routines that are purely local. */ #if defined(_NETBSD_SOURCE) #define FPARSELN_UNESCESC 0x01 #define FPARSELN_UNESCCONT 0x02 #define FPARSELN_UNESCCOMM 0x04 #define FPARSELN_UNESCREST 0x08 #define FPARSELN_UNESCALL 0x0f __BEGIN_DECLS //int asprintf(char ** __restrict, const char * __restrict, ...) // __attribute__((__format__(__printf__, 2, 3))); char *fgetln(FILE * __restrict, size_t * __restrict); char *fparseln(FILE *, size_t *, size_t *, const char[3], int); int fpurge(FILE *); void setbuffer(FILE *, char *, int); int setlinebuf(FILE *); int vasprintf(char ** __restrict, const char * __restrict, _BSD_VA_LIST_) __attribute__((__format__(__printf__, 2, 0))); int vscanf(const char * __restrict, _BSD_VA_LIST_) __attribute__((__format__(__scanf__, 1, 0))); int vfscanf(FILE * __restrict, const char * __restrict, _BSD_VA_LIST_) __attribute__((__format__(__scanf__, 2, 0))); int vsscanf(const char * __restrict, const char * __restrict, _BSD_VA_LIST_) __attribute__((__format__(__scanf__, 2, 0))); const char *fmtcheck(const char *, const char *) __attribute__((__format_arg__(2))); __END_DECLS /* * Stdio function-access interface. */ __BEGIN_DECLS FILE *funopen(const void *, int (*)(void *, char *, int), int (*)(void *, const char *, int), fpos_t (*)(void *, fpos_t, int), int (*)(void *)); __END_DECLS //#define fropen(cookie, fn) funopen(cookie, fn, 0, 0, 0) //#define fwopen(cookie, fn) funopen(cookie, 0, fn, 0, 0) #endif /* _NETBSD_SOURCE */ /* * Functions internal to the implementation. */ __BEGIN_DECLS int __srget(FILE *); int __swbuf(int, FILE *); __END_DECLS /* * The __sfoo macros are here so that we can * define function versions in the C library. */ #define __sgetc(p) (--(p)->_r < 0 ? __srget(p) : (int)(*(p)->_p++)) #if defined(__GNUC__) && defined(__STDC__) static __inline int __sputc(int _c, FILE *_p) { if (--_p->_w >= 0 || (_p->_w >= _p->_lbfsize && (char)_c != '\n')) return (*_p->_p++ = _c); else return (__swbuf(_c, _p)); } #else /* * This has been tuned to generate reasonable code on the vax using pcc. */ #define __sputc(c, p) \ (--(p)->_w < 0 ? \ (p)->_w >= (p)->_lbfsize ? \ (*(p)->_p = (unsigned char)(c)), *(p)->_p != '\n' ? \ (int)*(p)->_p++ : \ __swbuf('\n', p) : \ __swbuf((int)(c), p) : \ (*(p)->_p = (unsigned char)(c), (int)*(p)->_p++)) #endif #define __sfeof(p) (((p)->_flags & __SEOF) != 0) #define __sferror(p) (((p)->_flags & __SERR) != 0) #define __sclearerr(p) ((void)((p)->_flags &= ~(__SERR|__SEOF))) #define __sfileno(p) ((p)->_file) #ifndef __lint__ #if !defined(_REENTRANT) && !defined(_PTHREADS) #define feof(p) __sfeof(p) #define ferror(p) __sferror(p) #define clearerr(p) __sclearerr(p) #define getc(fp) __sgetc(fp) #define putc(x, fp) __sputc(x, fp) #endif /* !_REENTRANT && !_PTHREADS */ #endif /* __lint__ */ #define getchar() getc(stdin) #define putchar(x) putc(x, stdout) #if defined(_POSIX_C_SOURCE) || defined(_XOPEN_SOURCE) || \ defined(_NETBSD_SOURCE) #if !defined(_REENTRANT) && !defined(_PTHREADS) #define fileno(p) __sfileno(p) #endif /* !_REENTRANT && !_PTHREADS */ #endif /* !_ANSI_SOURCE */ #if (_POSIX_C_SOURCE - 0) >= 199506L || (_XOPEN_SOURCE - 0) >= 500 || \ defined(_REENTRANT) || defined(_NETBSD_SOURCE) #define getc_unlocked(fp) __sgetc(fp) #define putc_unlocked(x, fp) __sputc(x, fp) #define getchar_unlocked() getc_unlocked(stdin) #define putchar_unlocked(x) putc_unlocked(x, stdout) #endif /* _POSIX_C_SOURCE >= 199506 || _XOPEN_SOURCE >= 500 || _REENTRANT... */ #endif /* _STDIO_H_ */