/** @file Provides library functions for each of the UEFI Runtime Services. Only available to DXE and UEFI module types. Copyright (c) 2006 - 2008, Intel Corporation
All rights reserved. This program and the accompanying materials are licensed and made available under the terms and conditions of the BSD License which accompanies this distribution. The full text of the license may be found at http://opensource.org/licenses/bsd-license.php THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. **/ #ifndef __UEFI_RUNTIME_LIB__ #define __UEFI_RUNTIME_LIB__ extern const EFI_EVENT_NOTIFY _gDriverExitBootServicesEvent[]; extern const EFI_EVENT_NOTIFY _gDriverSetVirtualAddressMapEvent[]; /** This function allows the caller to determine if UEFI ExitBootServices() has been called. This function returns TRUE after all the EVT_SIGNAL_EXIT_BOOT_SERVICES functions have executed as a result of the OS calling ExitBootServices(). Prior to this time FALSE is returned. This function is used by runtime code to decide it is legal to access services that go away after ExitBootServices(). @retval TRUE The system has finished executing the EVT_SIGNAL_EXIT_BOOT_SERVICES event. @retval FALSE The system has not finished executing the EVT_SIGNAL_EXIT_BOOT_SERVICES event. **/ BOOLEAN EFIAPI EfiAtRuntime ( VOID ); /** This function allows the caller to determine if UEFI SetVirtualAddressMap() has been called. This function returns TRUE after all the EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGE functions have executed as a result of the OS calling SetVirtualAddressMap(). Prior to this time FALSE is returned. This function is used by runtime code to decide it is legal to access services that go away after SetVirtualAddressMap(). @retval TRUE The system has finished executing the EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGE event. @retval FALSE The system has not finished executing the EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGE event. **/ BOOLEAN EFIAPI EfiGoneVirtual ( VOID ); /** This service is a wrapper for the UEFI Runtime Service GetTime(). The GetTime() function returns a time that was valid sometime during the call to the function. While the returned EFI_TIME structure contains TimeZone and Daylight savings time information, the actual clock does not maintain these values. The current time zone and daylight saving time information returned by GetTime() are the values that were last set via SetTime(). The GetTime() function should take approximately the same amount of time to read the time each time it is called. All reported device capabilities are to be rounded up. During runtime, if a PC-AT CMOS device is present in the platform the caller must synchronize access to the device before calling GetTime(). @param Time A pointer to storage to receive a snapshot of the current time. @param Capabilities An optional pointer to a buffer to receive the real time clock device's capabilities. @retval EFI_SUCCESS The operation completed successfully. @retval EFI_INVALID_PARAMETER Time is NULL. @retval EFI_DEVICE_ERROR The time could not be retrieved due to a hardware error. **/ EFI_STATUS EFIAPI EfiGetTime ( OUT EFI_TIME *Time, OUT EFI_TIME_CAPABILITIES *Capabilities OPTIONAL ); /** This service is a wrapper for the UEFI Runtime Service SetTime(). The SetTime() function sets the real time clock device to the supplied time, and records the current time zone and daylight savings time information. The SetTime() function is not allowed to loop based on the current time. For example, if the device does not support a hardware reset for the sub-resolution time, the code is not to implement the feature by waiting for the time to wrap. During runtime, if a PC-AT CMOS device is present in the platform the caller must synchronize access to the device before calling SetTime(). @param Time A pointer to the current time. Type EFI_TIME is defined in the GetTime() function description. Full error checking is performed on the different fields of the EFI_TIME structure (refer to the EFI_TIME definition in the GetTime() function description for full details), and EFI_INVALID_PARAMETER is returned if any field is out of range. @retval EFI_SUCCESS The operation completed successfully. @retval EFI_INVALID_PARAMETER A time field is out of range. @retval EFI_DEVICE_ERROR The time could not be set due to a hardware error. **/ EFI_STATUS EFIAPI EfiSetTime ( IN EFI_TIME *Time ); /** Returns the current wakeup alarm clock setting. The alarm clock time may be rounded from the set alarm clock time to be within the resolution of the alarm clock device. The resolution of the alarm clock device is defined to be one second. During runtime, if a PC-AT CMOS device is present in the platform the caller must synchronize access to the device before calling GetWakeupTime(). @param Enabled Indicates if the alarm is currently enabled or disabled. @param Pending Indicates if the alarm signal is pending and requires acknowledgement. @param Time The current alarm setting. Type EFI_TIME is defined in the GetTime() function description. @retval EFI_SUCCESS The alarm settings were returned. @retval EFI_INVALID_PARAMETER Enabled is NULL. @retval EFI_INVALID_PARAMETER Pending is NULL. @retval EFI_INVALID_PARAMETER Time is NULL. @retval EFI_DEVICE_ERROR The wakeup time could not be retrieved due to a hardware error. @retval EFI_UNSUPPORTED A wakeup timer is not supported on this platform. **/ EFI_STATUS EFIAPI EfiGetWakeupTime ( OUT BOOLEAN *Enabled, OUT BOOLEAN *Pending, OUT EFI_TIME *Time ); /** Sets the system wakeup alarm clock time. @param Enable Enable or disable the wakeup alarm. @param Time If Enable is TRUE, the time to set the wakeup alarm for. Type EFI_TIME is defined in the GetTime() function description. If Enable is FALSE, then this parameter is optional, and may be NULL. @retval EFI_SUCCESS If Enable is TRUE, then the wakeup alarm was enabled. If Enable is FALSE, then the wakeup alarm was disabled. @retval EFI_INVALID_PARAMETER A time field is out of range. @retval EFI_DEVICE_ERROR The wakeup time could not be set due to a hardware error. @retval EFI_UNSUPPORTED A wakeup timer is not supported on this platform. **/ EFI_STATUS EFIAPI EfiSetWakeupTime ( IN BOOLEAN Enable, IN EFI_TIME *Time OPTIONAL ); /** Return value of variable. @param VariableName the name of the vendor's variable, it's a Null-Terminated Unicode String @param VendorGuid Unify identifier for vendor. @param Attributes Point to memory location to return the attributes of variable. If the point is NULL, the parameter would be ignored. @param DataSize As input, point to the maxinum size of return Data-Buffer. As output, point to the actual size of the returned Data-Buffer. @param Data Point to return Data-Buffer. @retval EFI_SUCCESS The function completed successfully. @retval EFI_NOT_FOUND The variable was not found. @retval EFI_BUFFER_TOO_SMALL The DataSize is too small for the result. DataSize has been updated with the size needed to complete the request. @retval EFI_INVALID_PARAMETER VariableName is NULL. @retval EFI_INVALID_PARAMETER VendorGuid is NULL. @retval EFI_INVALID_PARAMETER DataSize is NULL. @retval EFI_INVALID_PARAMETER The DataSize is not too small and Data is NULL. @retval EFI_DEVICE_ERROR The variable could not be retrieved due to a hardware error. @retval EFI_SECURITY_VIOLATION The variable could not be retrieved due to an authentication failure. **/ EFI_STATUS EFIAPI EfiGetVariable ( IN CHAR16 *VariableName, IN EFI_GUID *VendorGuid, OUT UINT32 *Attributes OPTIONAL, IN OUT UINTN *DataSize, OUT VOID *Data ); /** Enumerates variable's name. @param VariableNameSize As input, point to maxinum size of variable name. As output, point to actual size of varaible name. @param VariableName As input, supplies the last VariableName that was returned by GetNextVariableName(). As output, returns the name of variable. The name string is Null-Terminated Unicode string. @param VendorGuid As input, supplies the last VendorGuid that was returned by GetNextVriableName(). As output, returns the VendorGuid of the current variable. @retval EFI_SUCCESS The function completed successfully. @retval EFI_NOT_FOUND The next variable was not found. @retval EFI_BUFFER_TOO_SMALL The VariableNameSize is too small for the result. VariableNameSize has been updated with the size needed to complete the request. @retval EFI_INVALID_PARAMETER VariableNameSize is NULL. @retval EFI_INVALID_PARAMETER VariableName is NULL. @retval EFI_INVALID_PARAMETER VendorGuid is NULL. @retval EFI_DEVICE_ERROR The variable name could not be retrieved due to a hardware error. **/ EFI_STATUS EFIAPI EfiGetNextVariableName ( IN OUT UINTN *VariableNameSize, IN OUT CHAR16 *VariableName, IN OUT EFI_GUID *VendorGuid ); /** Sets value of variable. @param VariableName the name of the vendor's variable, it's a Null-Terminated Unicode String @param VendorGuid Unify identifier for vendor. @param Attributes Point to memory location to return the attributes of variable. If the point is NULL, the parameter would be ignored. @param DataSize The size in bytes of Data-Buffer. @param Data Point to the content of the variable. @retval EFI_SUCCESS The firmware has successfully stored the variable and its data as defined by the Attributes. @retval EFI_INVALID_PARAMETER An invalid combination of attribute bits was supplied, or the DataSize exceeds the maximum allowed. @retval EFI_INVALID_PARAMETER VariableName is an empty Unicode string. @retval EFI_OUT_OF_RESOURCES Not enough storage is available to hold the variable and its data. @retval EFI_DEVICE_ERROR The variable could not be saved due to a hardware failure. @retval EFI_WRITE_PROTECTED The variable in question is read-only. @retval EFI_WRITE_PROTECTED The variable in question cannot be deleted. @retval EFI_SECURITY_VIOLATION The variable could not be written due to EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS set but the AuthInfo does NOT pass the validation check carried out by the firmware. @retval EFI_NOT_FOUND The variable trying to be updated or deleted was not found. **/ EFI_STATUS EFIAPI EfiSetVariable ( IN CHAR16 *VariableName, IN EFI_GUID *VendorGuid, IN UINT32 Attributes, IN UINTN DataSize, IN VOID *Data ); /** Returns the next high 32 bits of platform's monotonic counter. @param HighCount Pointer to returned value. @retval EFI_SUCCESS The next high monotonic count was returned. @retval EFI_DEVICE_ERROR The device is not functioning properly. @retval EFI_INVALID_PARAMETER HighCount is NULL. **/ EFI_STATUS EFIAPI EfiGetNextHighMonotonicCount ( OUT UINT32 *HighCount ); /** Resets the entire platform. @param ResetType The type of reset to perform. @param ResetStatus The status code for the reset. If the system reset is part of a normal operation, the status code would be EFI_SUCCESS. If the system reset is due to some type of failure the most appropriate EFI Status code would be used. @param DataSizeThe size, in bytes, of ResetData. @param ResetData For a ResetType of EfiResetCold, EfiResetWarm, or EfiResetShutdown the data buffer starts with a Null-terminated Unicode string, optionally followed by additional binary data. The string is a description that the caller may use to further indicate the reason for the system reset. ResetData is only valid if ResetStatus is something other then EFI_SUCCESS. This pointer must be a physical address. For a ResetType of EfiRestUpdate the data buffer also starts with a Null-terminated string that is followed by a physical VOID * to an EFI_CAPSULE_HEADER. **/ VOID EFIAPI EfiResetSystem ( IN EFI_RESET_TYPE ResetType, IN EFI_STATUS ResetStatus, IN UINTN DataSize, IN CHAR16 *ResetData ); /** This service converts a function pointer from physical to virtual addressing. @param DebugDisposition Supplies type information for the pointer being converted. @param Address The pointer to a pointer that is to be fixed to be the value needed for the new virtual address mapping being applied. @retval EFI_SUCCESS The pointer pointed to by Address was modified. @retval EFI_NOT_FOUND The pointer pointed to by Address was not found to be part of the current memory map. This is normally fatal. @retval EFI_INVALID_PARAMETER Address is NULL. @retval EFI_INVALID_PARAMETER *Address is NULL and DebugDispositio **/ EFI_STATUS EFIAPI EfiConvertPointer ( IN UINTN DebugDisposition, IN OUT VOID **Address ); /** Determines the new virtual address that is to be used on subsequent memory accesses. For IA32, X64, and EBC, this service is a wrapper for the UEFI Runtime Service ConvertPointer(). See the UEFI Specification for details. For IPF, this function interprets Address as a pointer to an EFI_PLABEL structure and both the EntryPoint and GP fields of an EFI_PLABEL are converted from physical to virtiual addressing. Since IPF allows the GP to point to an address outside a PE/COFF image, the physical to virtual offset for the EntryPoint field is used to adjust the GP field. The UEFI Runtime Service ConvertPointer() is used to convert EntryPoint and the status code for this conversion is always returned. If the convertion of EntryPoint fails, then neither EntryPoint nor GP are modified. See the UEFI Specification for details on the UEFI Runtime Service ConvertPointer(). @param DebugDisposition Supplies type information for the pointer being converted. @param Address The pointer to a pointer that is to be fixed to be the value needed for the new virtual address mapping being applied. @return EFI_STATUS value from EfiConvertPointer(). **/ EFI_STATUS EFIAPI EfiConvertFunctionPointer ( IN UINTN DebugDisposition, IN OUT VOID **Address ); /** Change the runtime addressing mode of EFI firmware from physical to virtual. @param MemoryMapSize The size in bytes of VirtualMap. @param DescriptorSize The size in bytes of an entry in the VirtualMap. @param DescriptorVersion The version of the structure entries in VirtualMap. @param VirtualMap An array of memory descriptors which contain new virtual address mapping information for all runtime ranges. Type EFI_MEMORY_DESCRIPTOR is defined in the GetMemoryMap() function description. @retval EFI_SUCCESS The virtual address map has been applied. @retval EFI_UNSUPPORTED EFI firmware is not at runtime, or the EFI firmware is already in virtual address mapped mode. @retval EFI_INVALID_PARAMETER DescriptorSize or DescriptorVersion is invalid. @retval EFI_NO_MAPPING A virtual address was not supplied for a range in the memory map that requires a mapping. @retval EFI_NOT_FOUND A virtual address was supplied for an address that is not found in the memory map. **/ EFI_STATUS EFIAPI EfiSetVirtualAddressMap ( IN UINTN MemoryMapSize, IN UINTN DescriptorSize, IN UINT32 DescriptorVersion, IN CONST EFI_MEMORY_DESCRIPTOR *VirtualMap ); /** Convert the standard Lib double linked list to a virtual mapping. This service uses EfiConvertPointer() to walk a double linked list and convert all the link pointers to their virtual mappings. This function is only guaranteed to work during the EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGE event and calling it at other times has undefined results. @param DebugDisposition Supplies type information for the pointer being converted. @param ListHead Head of linked list to convert. @retval EFI_SUCCESS Success to execute the function. @retval !EFI_SUCCESS Failed to e3xecute the function. **/ EFI_STATUS EFIAPI EfiConvertList ( IN UINTN DebugDisposition, IN OUT LIST_ENTRY *ListHead ); /** Passes capsules to the firmware with both virtual and physical mapping. Depending on the intended consumption, the firmware may process the capsule immediately. If the payload should persist across a system reset, the reset value returned from EFI_QueryCapsuleCapabilities must be passed into ResetSystem() and will cause the capsule to be processed by the firmware as part of the reset process. @param CapsuleHeaderArray Virtual pointer to an array of virtual pointers to the capsules being passed into update capsule. Each capsules is assumed to stored in contiguous virtual memory. The capsules in the CapsuleHeaderArray must be the same capsules as the ScatterGatherList. The CapsuleHeaderArray must have the capsules in the same order as the ScatterGatherList. @param CapsuleCount Number of pointers to EFI_CAPSULE_HEADER in CaspuleHeaderArray. @param ScatterGatherList Physical pointer to a set of EFI_CAPSULE_BLOCK_DESCRIPTOR that describes the location in physical memory of a set of capsules. See Related Definitions for an explanation of how more than one capsule is passed via this interface. The capsules in the ScatterGatherList must be in the same order as the CapsuleHeaderArray. This parameter is only referenced if the capsules are defined to persist across system reset. @retval EFI_SUCCESS Valid capsule was passed. If CAPSULE_FLAGS_PERSIT_ACROSS_RESET is not set, the capsule has been successfully processed by the firmware. @retval EFI_INVALID_PARAMETER CapsuleSize or HeaderSize is NULL. @retval EFI_INVALID_PARAMETER CapsuleCount is 0 @retval EFI_DEVICE_ERROR The capsule update was started, but failed due to a device error. @retval EFI_UNSUPPORTED The capsule type is not supported on this platform. @retval EFI_OUT_OF_RESOURCES There were insufficient resources to process the capsule. **/ EFI_STATUS EFIAPI EfiUpdateCapsule ( IN EFI_CAPSULE_HEADER **CapsuleHeaderArray, IN UINTN CapsuleCount, IN EFI_PHYSICAL_ADDRESS ScatterGatherList OPTIONAL ); /** The QueryCapsuleCapabilities() function allows a caller to test to see if a capsule or capsules can be updated via UpdateCapsule(). The Flags values in the capsule header and size of the entire capsule is checked. If the caller needs to query for generic capsule capability a fake EFI_CAPSULE_HEADER can be constructed where CapsuleImageSize is equal to HeaderSize that is equal to sizeof (EFI_CAPSULE_HEADER). To determine reset requirements, CAPSULE_FLAGS_PERSIST_ACROSS_RESET should be set in the Flags field of the EFI_CAPSULE_HEADER. The firmware must support any capsule that has the CAPSULE_FLAGS_PERSIST_ACROSS_RESET flag set in EFI_CAPSULE_HEADER. The firmware sets the policy for what capsules are supported that do not have the CAPSULE_FLAGS_PERSIST_ACROSS_RESET flag set. @param CapsuleHeaderArray Virtual pointer to an array of virtual pointers to the capsules being passed into update capsule. The capsules are assumed to stored in contiguous virtual memory. @param CapsuleCount Number of pointers to EFI_CAPSULE_HEADER in CaspuleHeaderArray. @param MaximumCapsuleSize On output the maximum size that UpdateCapsule() can support as an argument to UpdateCapsule() via CapsuleHeaderArray and ScatterGatherList. Undefined on input. @param ResetType Returns the type of reset required for the capsule update. @retval EFI_SUCCESS Valid answer returned. @retval EFI_INVALID_PARAMETER MaximumCapsuleSize is NULL. @retval EFI_UNSUPPORTED The capsule type is not supported on this platform, and MaximumCapsuleSize and ResetType are undefined. @retval EFI_OUT_OF_RESOURCES There were insufficient resources to process the query request. **/ EFI_STATUS EFIAPI EfiQueryCapsuleCapabilities ( IN EFI_CAPSULE_HEADER **CapsuleHeaderArray, IN UINTN CapsuleCount, OUT UINT64 *MaximumCapsuleSize, OUT EFI_RESET_TYPE *ResetType ); /** Returns information about the EFI variables. The QueryVariableInfo() function allows a caller to obtain the information about the maximum size of the storage space available for the EFI variables, the remaining size of the storage space available for the EFI variables and the maximum size of each individual EFI variable, associated with the attributes specified. The returned MaximumVariableStorageSize, RemainingVariableStorageSize, MaximumVariableSize information may change immediately after the call based on other runtime activities including asynchronous error events. Also, these values associated with different attributes are not additive in nature. @param Attributes Attributes bitmask to specify the type of variables on which to return information. Refer to the GetVariable() function description. @param MaximumVariableStorageSize On output the maximum size of the storage space available for the EFI variables associated with the attributes specified. @param RemainingVariableStorageSize Returns the remaining size of the storage space available for the EFI variables associated with the attributes specified.. @param MaximumVariableSize Returns the maximum size of the individual EFI variables associated with the attributes specified. @retval EFI_SUCCESS Valid answer returned. @retval EFI_INVALID_PARAMETER An invalid combination of attribute bits was supplied. @retval EFI_UNSUPPORTED EFI_UNSUPPORTED The attribute is not supported on this platform, and the MaximumVariableStorageSize, RemainingVariableStorageSize, MaximumVariableSize are undefined. **/ EFI_STATUS EFIAPI EfiQueryVariableInfo ( IN UINT32 Attributes, OUT UINT64 *MaximumVariableStorageSize, OUT UINT64 *RemainingVariableStorageSize, OUT UINT64 *MaximumVariableSize ); #endif