/** @file TCP4 protocol services header file. Copyright (c) 2005 - 2006, Intel Corporation
All rights reserved. This program and the accompanying materials are licensed and made available under the terms and conditions of the BSD License which accompanies this distribution. The full text of the license may be found at http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. **/ #ifndef _TCP4_MAIN_H_ #define _TCP4_MAIN_H_ #include "Socket.h" #include "Tcp4Proto.h" #include "Tcp4Func.h" #include "Tcp4Driver.h" extern UINT16 mTcp4RandomPort; extern CHAR16 *mTcpStateName[]; // // Driver Produced Protocol Prototypes // // // Function prototype for the Tcp4 socket request handler // /** The procotol handler provided to the socket layer, used to dispatch the socket level requests by calling the corresponding TCP layer functions. @param Sock Pointer to the socket of this TCP instance. @param Request The code of this operation request. @param Data Pointer to the operation specific data passed in together with the operation request. @retval EFI_SUCCESS The socket request is completed successfully. @retval other The error status returned by the corresponding TCP layer function. **/ EFI_STATUS Tcp4Dispatcher ( IN SOCKET *Sock, IN SOCK_REQUEST Request, IN VOID *Data OPTIONAL ); /// /// TCP mode data /// typedef struct _TCP4_MODE_DATA { EFI_TCP4_CONNECTION_STATE *Tcp4State; EFI_TCP4_CONFIG_DATA *Tcp4ConfigData; EFI_IP4_MODE_DATA *Ip4ModeData; EFI_MANAGED_NETWORK_CONFIG_DATA *MnpConfigData; EFI_SIMPLE_NETWORK_MODE *SnpModeData; } TCP4_MODE_DATA; /// /// TCP route infomation data /// typedef struct _TCP4_ROUTE_INFO { BOOLEAN DeleteRoute; EFI_IPv4_ADDRESS *SubnetAddress; EFI_IPv4_ADDRESS *SubnetMask; EFI_IPv4_ADDRESS *GatewayAddress; } TCP4_ROUTE_INFO; /** Get the current operational status of a TCP instance. The GetModeData() function copies the current operational settings of this EFI TCPv4 Protocol instance into user-supplied buffers. This function can also be used to retrieve the operational setting of underlying drivers such as IPv4, MNP, or SNP. @param This Pointer to the EFI_TCP4_PROTOCOL instance. @param Tcp4State Pointer to the buffer to receive the current TCP state. @param Tcp4ConfigData Pointer to the buffer to receive the current TCP configuration. @param Ip4ModeData Pointer to the buffer to receive the current IPv4 configuration data used by the TCPv4 instance. @param MnpConfigData Pointer to the buffer to receive the current MNP configuration data indirectly used by the TCPv4 Instance. @param SnpModeData Pointer to the buffer to receive the current SNP configuration data indirectly used by the TCPv4 Instance. @retval EFI_SUCCESS The mode data was read. @retval EFI_NOT_STARTED No configuration data is available because this instance hasn't been started. @retval EFI_INVALID_PARAMETER This is NULL. **/ EFI_STATUS EFIAPI Tcp4GetModeData ( IN CONST EFI_TCP4_PROTOCOL *This, OUT EFI_TCP4_CONNECTION_STATE *Tcp4State OPTIONAL, OUT EFI_TCP4_CONFIG_DATA *Tcp4ConfigData OPTIONAL, OUT EFI_IP4_MODE_DATA *Ip4ModeData OPTIONAL, OUT EFI_MANAGED_NETWORK_CONFIG_DATA *MnpConfigData OPTIONAL, OUT EFI_SIMPLE_NETWORK_MODE *SnpModeData OPTIONAL ); /** Initialize or brutally reset the operational parameters for this EFI TCPv4 instance. The Configure() function does the following: * Initialize this EFI TCPv4 instance, i.e., initialize the communication end setting, specify active open or passive open for an instance. * Reset this TCPv4 instance brutally, i.e., cancel all pending asynchronous tokens, flush transmission and receiving buffer directly without informing the communication peer. No other TCPv4 Protocol operation can be executed by this instance until it is configured properly. For an active TCP4 instance, after a proper configuration it may call Connect() to initiates the three-way handshake. For a passive TCP4 instance, its state will transit to Tcp4StateListen after configuration, and Accept() may be called to listen the incoming TCP connection request. If TcpConfigData is set to NULL, the instance is reset. Resetting process will be done brutally, the state machine will be set to Tcp4StateClosed directly, the receive queue and transmit queue will be flushed, and no traffic is allowed through this instance. @param This Pointer to the EFI_TCP4_PROTOCOL instance. @param TcpConfigData Pointer to the configure data to configure the instance. @retval EFI_SUCCESS The operational settings are set, changed, or reset successfully. @retval EFI_NO_MAPPING When using a default address, configuration (through DHCP, BOOTP, RARP, etc.) is not finished. @retval EFI_INVALID_PARAMETER One or more parameters are invalid. @retval EFI_ACCESS_DENIED Configuring TCP instance when it is already configured. @retval EFI_DEVICE_ERROR An unexpected network or system error occurred. @retval EFI_UNSUPPORTED One or more of the control options are not supported in the implementation. @retval EFI_OUT_OF_RESOURCES Could not allocate enough system resources. **/ EFI_STATUS EFIAPI Tcp4Configure ( IN EFI_TCP4_PROTOCOL *This, IN EFI_TCP4_CONFIG_DATA *TcpConfigData OPTIONAL ); /** Add or delete routing entries. The Routes() function adds or deletes a route from the instance's routing table. The most specific route is selected by comparing the SubnetAddress with the destination IP address's arithmetical AND to the SubnetMask. The default route is added with both SubnetAddress and SubnetMask set to 0.0.0.0. The default route matches all destination IP addresses if there is no more specific route. Direct route is added with GatewayAddress set to 0.0.0.0. Packets are sent to the destination host if its address can be found in the Address Resolution Protocol (ARP) cache or it is on the local subnet. If the instance is configured to use default address, a direct route to the local network will be added automatically. Each TCP instance has its own independent routing table. Instance that uses the default IP address will have a copy of the EFI_IP4_CONFIG_PROTOCOL's routing table. The copy will be updated automatically whenever the IP driver reconfigures its instance. As a result, the previous modification to the instance's local copy will be lost. The priority of checking the route table is specific with IP implementation and every IP implementation must comply with RFC 1122. @param This Pointer to the EFI_TCP4_PROTOCOL instance. @param DeleteRoute If TRUE, delete the specified route from routing table; if FALSE, add the specified route to routing table. DestinationAddress and SubnetMask are used as the keywords to search route entry. @param SubnetAddress The destination network. @param SubnetMask The subnet mask for the destination network. @param GatewayAddress The gateway address for this route. It must be on the same subnet with the station address unless a direct route is specified. @retval EFI_SUCCESS The operation completed successfully. @retval EFI_NOT_STARTED The EFI_TCP4_PROTOCOL instance has not been configured. @retval EFI_NO_MAPPING When using a default address, configuration (through DHCP, BOOTP, RARP, etc.) is not finished. @retval EFI_INVALID_PARAMETER One or more parameters are invalid. @retval EFI_OUT_OF_RESOURCES Could not allocate enough resources to add the entry to the routing table. @retval EFI_NOT_FOUND This route is not in the routing table. @retval EFI_ACCESS_DENIED This route is already in the routing table. @retval EFI_UNSUPPORTED The TCP driver does not support this operation. **/ EFI_STATUS EFIAPI Tcp4Routes ( IN EFI_TCP4_PROTOCOL *This, IN BOOLEAN DeleteRoute, IN EFI_IPv4_ADDRESS *SubnetAddress, IN EFI_IPv4_ADDRESS *SubnetMask, IN EFI_IPv4_ADDRESS *GatewayAddress ); /** Initiate a nonblocking TCP connection request for an active TCP instance. The Connect() function will initiate an active open to the remote peer configured in current TCP instance if it is configured active. If the connection succeeds or fails due to any error, the ConnectionToken->CompletionToken.Event will be signaled and ConnectionToken->CompletionToken.Status will be updated accordingly. This function can only be called for the TCP instance in Tcp4StateClosed state. The instance will transfer into Tcp4StateSynSent if the function returns EFI_SUCCESS. If TCP three way handshake succeeds, its state will become Tcp4StateEstablished, otherwise, the state will return to Tcp4StateClosed. @param This Pointer to the EFI_TCP4_PROTOCOL instance @param ConnectionToken Pointer to the connection token to return when the TCP three way handshake finishes. @retval EFI_SUCCESS The connection request is successfully initiated and the state of this TCPv4 instance has been changed to Tcp4StateSynSent. @retval EFI_NOT_STARTED This EFI_TCP4_PROTOCOL instance hasn't been configured. @retval EFI_ACCESS_DENIED The instance is not configured as an active one or it is not in Tcp4StateClosed state. @retval EFI_INVALID_PARAMETER One or more parameters are invalid. @retval EFI_OUT_OF_RESOURCES The driver can't allocate enough resource to initiate the active open. @retval EFI_DEVICE_ERROR An unexpected system or network error occurred. **/ EFI_STATUS EFIAPI Tcp4Connect ( IN EFI_TCP4_PROTOCOL *This, IN EFI_TCP4_CONNECTION_TOKEN *ConnectionToken ); /** Listen on the passive instance to accept an incoming connection request. The Accept() function initiates an asynchronous accept request to wait for an incoming connection on the passive TCP instance. If a remote peer successfully establishes a connection with this instance, a new TCP instance will be created and its handle will be returned in ListenToken->NewChildHandle. The newly created instance is configured by inheriting the passive instance's configuration and is ready for use upon return. The instance is in the Tcp4StateEstablished state. The ListenToken->CompletionToken.Event will be signaled when a new connection is accepted, user aborts the listen or connection is reset. This function only can be called when current TCP instance is in Tcp4StateListen state. @param This Pointer to the EFI_TCP4_PROTOCOL instance @param ListenToken Pointer to the listen token to return when operation finishes. @retval EFI_SUCCESS The listen token has been queued successfully. @retval EFI_NOT_STARTED The EFI_TCP4_PROTOCOL instance hasn't been configured. @retval EFI_ACCESS_DENIED The instatnce is not a passive one or it is not in Tcp4StateListen state or a same listen token has already existed in the listen token queue of this TCP instance. @retval EFI_INVALID_PARAMETER One or more parameters are invalid. @retval EFI_OUT_OF_RESOURCES Could not allocate enough resources to finish the operation. @retval EFI_DEVICE_ERROR Any unexpected and not belonged to above category error. **/ EFI_STATUS EFIAPI Tcp4Accept ( IN EFI_TCP4_PROTOCOL *This, IN EFI_TCP4_LISTEN_TOKEN *ListenToken ); /** Queues outgoing data into the transmit queue. The Transmit() function queues a sending request to this TCPv4 instance along with the user data. The status of the token is updated and the event in the token will be signaled once the data is sent out or some error occurs. @param This Pointer to the EFI_TCP4_PROTOCOL instance @param Token Pointer to the completion token to queue to the transmit queue @retval EFI_SUCCESS The data has been queued for transmission. @retval EFI_NOT_STARTED The EFI_TCP4_PROTOCOL instance hasn't been configured. @retval EFI_NO_MAPPING When using a default address, configuration (DHCP, BOOTP, RARP, etc.) is not finished yet. @retval EFI_INVALID_PARAMETER One or more parameters are invalid. @retval EFI_ACCESS_DENIED One or more of the following conditions is TRUE: * A transmit completion token with the same Token-> CompletionToken.Event was already in the transmission queue. * The current instance is in Tcp4StateClosed state * The current instance is a passive one and it is in Tcp4StateListen state. * User has called Close() to disconnect this connection. @retval EFI_NOT_READY The completion token could not be queued because the transmit queue is full. @retval EFI_OUT_OF_RESOURCES Could not queue the transmit data because of resource shortage. @retval EFI_NETWORK_UNREACHABLE There is no route to the destination network or address. **/ EFI_STATUS EFIAPI Tcp4Transmit ( IN EFI_TCP4_PROTOCOL *This, IN EFI_TCP4_IO_TOKEN *Token ); /** Place an asynchronous receive request into the receiving queue. The Receive() function places a completion token into the receive packet queue. This function is always asynchronous. The caller must allocate the Token->CompletionToken.Event and the FragmentBuffer used to receive data. He also must fill the DataLength which represents the whole length of all FragmentBuffer. When the receive operation completes, the EFI TCPv4 Protocol driver updates the Token->CompletionToken.Status and Token->Packet.RxData fields and the Token->CompletionToken.Event is signaled. If got data the data and its length will be copy into the FragmentTable, in the same time the full length of received data will be recorded in the DataLength fields. Providing a proper notification function and context for the event will enable the user to receive the notification and receiving status. That notification function is guaranteed to not be re-entered. @param This Pointer to the EFI_TCP4_PROTOCOL instance. @param Token Pointer to a token that is associated with the receive data descriptor. @retval EFI_SUCCESS The receive completion token was cached. @retval EFI_NOT_STARTED The EFI_TCP4_PROTOCOL instance hasn't been configured. @retval EFI_NO_MAPPING When using a default address, configuration (DHCP, BOOTP, RARP, etc.) is not finished yet. @retval EFI_INVALID_PARAMETER One or more parameters are invalid. @retval EFI_OUT_OF_RESOURCES The receive completion token could not be queued due to a lack of system resources. @retval EFI_DEVICE_ERROR An unexpected system or network error occurred. The EFI TCPv4 Protocol instance has been reset to startup defaults. @retval EFI_ACCESS_DENIED One or more of the following conditions is TRUE: * A receive completion token with the same Token->CompletionToken.Event was already in the receive queue. * The current instance is in Tcp4StateClosed state. * The current instance is a passive one and it is in Tcp4StateListen state. * User has called Close() to disconnect this connection. @retval EFI_CONNECTION_FIN The communication peer has closed the connection and there is no any buffered data in the receive buffer of this instance. @retval EFI_NOT_READY The receive request could not be queued because the receive queue is full. **/ EFI_STATUS EFIAPI Tcp4Receive ( IN EFI_TCP4_PROTOCOL *This, IN EFI_TCP4_IO_TOKEN *Token ); /** Disconnecting a TCP connection gracefully or reset a TCP connection. Initiate an asynchronous close token to TCP driver. After Close() is called, any buffered transmission data will be sent by TCP driver and the current instance will have a graceful close working flow described as RFC 793 if AbortOnClose is set to FALSE, otherwise, a rest packet will be sent by TCP driver to fast disconnect this connection. When the close operation completes successfully the TCP instance is in Tcp4StateClosed state, all pending asynchronous operation is signaled and any buffers used for TCP network traffic is flushed. @param This Pointer to the EFI_TCP4_PROTOCOL instance. @param CloseToken Pointer to the close token to return when operation finishes. @retval EFI_SUCCESS The operation completed successfully. @retval EFI_NOT_STARTED The EFI_TCP4_PROTOCOL instance hasn't been configured. @retval EFI_ACCESS_DENIED One or more of the following are TRUE: * Configure() has been called with TcpConfigData set to NULL and this function has not returned. * Previous Close() call on this instance has not finished. @retval EFI_INVALID_PARAMETER One ore more parameters are invalid. @retval EFI_OUT_OF_RESOURCES Could not allocate enough resource to finish the operation. @retval EFI_DEVICE_ERROR Any unexpected and not belonged to above category error. **/ EFI_STATUS EFIAPI Tcp4Close ( IN EFI_TCP4_PROTOCOL *This, IN EFI_TCP4_CLOSE_TOKEN *CloseToken ); /** Abort an asynchronous connection, listen, transmission or receive request. The Cancel() function aborts a pending connection, listen, transmit or receive request. If Token is not NULL and the token is in the connection, listen, transmission or receive queue when it is being cancelled, its Token->Status will be set to EFI_ABORTED and then Token->Event will be signaled. If the token is not in one of the queues, which usually means that the asynchronous operation has completed, EFI_NOT_FOUND is returned. If Token is NULL all asynchronous token issued by Connect(), Accept(), Transmit() and Receive()will be aborted. NOTE: It has not been implemented currently. @param This Pointer to the EFI_TCP4_PROTOCOL instance. @param Token Pointer to a token that has been issued by Connect(), Accept(), Transmit() or Receive(). If NULL, all pending tokens issued by above four functions will be aborted. @retval EFI_SUCCESS The asynchronous I/O request is aborted and Token->Event is signaled. @retval EFI_INVALID_PARAMETER This is NULL. @retval EFI_NOT_STARTED This instance hasn's been configured. @retval EFI_NO_MAPPING When using the default address, configuration (DHCP, BOOTP,RARP, etc.) hasn's finished yet. @retval EFI_NOT_FOUND The asynchronous I/O request isn's found in the transmission or receive queue. It has either completed or wasn's issued by Transmit() and Receive(). @retval EFI_UNSUPPORTED The operation is not supported in current implementation. **/ EFI_STATUS EFIAPI Tcp4Cancel ( IN EFI_TCP4_PROTOCOL *This, IN EFI_TCP4_COMPLETION_TOKEN *Token OPTIONAL ); /** Poll to receive incoming data and transmit outgoing segments. The Poll() function increases the rate that data is moved between the network and application and can be called when the TCP instance is created successfully. Its use is optional. In some implementations, the periodical timer in the MNP driver may not poll the underlying communications device fast enough to avoid drop packets. Drivers and applications that are experiencing packet loss should try calling the Poll() function in a high frequency. @param This Pointer to the EFI_TCP4_PROTOCOL instance. @retval EFI_SUCCESS Incoming or outgoing data was processed. @retval EFI_INVALID_PARAMETER This is NULL. @retval EFI_DEVICE_ERROR An unexpected system or network error occurred. @retval EFI_NOT_READY No incoming or outgoing data was processed. @retval EFI_TIMEOUT Data was dropped out of the transmission or receive queue. Consider increasing the polling rate. **/ EFI_STATUS EFIAPI Tcp4Poll ( IN EFI_TCP4_PROTOCOL *This ); #endif