# FLASH layout file for ARM VE. # # Copyright (c) 2011, ARM Limited. All rights reserved. # # This program and the accompanying materials # are licensed and made available under the terms and conditions of the BSD License # which accompanies this distribution. The full text of the license may be found at # http://opensource.org/licenses/bsd-license.php # # THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, # WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. # ################################################################################ # # FD Section # The [FD] Section is made up of the definition statements and a # description of what goes into the Flash Device Image. Each FD section # defines one flash "device" image. A flash device image may be one of # the following: Removable media bootable image (like a boot floppy # image,) an Option ROM image (that would be "flashed" into an add-in # card,) a System "Flash" image (that would be burned into a system's # flash) or an Update ("Capsule") image that will be used to update and # existing system flash. # ################################################################################ [FD.Sec_ArmVExpress_EFI] BaseAddress = 0x44000000|gArmTokenSpaceGuid.PcdSecureFdBaseAddress #The base address of the Secure FLASH Device. Size = 0x00200000|gArmTokenSpaceGuid.PcdSecureFdSize #The size in bytes of the Secure FLASH Device ErasePolarity = 1 BlockSize = 0x00001000 NumBlocks = 0x200 ################################################################################ # # Following are lists of FD Region layout which correspond to the locations of different # images within the flash device. # # Regions must be defined in ascending order and may not overlap. # # A Layout Region start with a eight digit hex offset (leading "0x" required) followed by # the pipe "|" character, followed by the size of the region, also in hex with the leading # "0x" characters. Like: # Offset|Size # PcdOffsetCName|PcdSizeCName # RegionType # ################################################################################ 0x00000000|0x00200000 gEmbeddedTokenSpaceGuid.PcdFlashFvSecBase|gEmbeddedTokenSpaceGuid.PcdFlashFvSecSize FV = FVMAIN_SEC [FD.ArmVExpress_EFI] !if $(EDK2_ARMVE_STANDALONE) == 1 BaseAddress = 0x45000000|gArmTokenSpaceGuid.PcdNormalFdBaseAddress # The base address of the Firmware in NOR Flash. !else BaseAddress = 0x80000000|gArmTokenSpaceGuid.PcdNormalFdBaseAddress # The base address of the Firmware in remapped DRAM. !endif Size = 0x00200000|gArmTokenSpaceGuid.PcdNormalFdSize # The size in bytes of the FLASH Device ErasePolarity = 1 # This one is tricky, it must be: BlockSize * NumBlocks = Size BlockSize = 0x00001000 NumBlocks = 0x200 ################################################################################ # # Following are lists of FD Region layout which correspond to the locations of different # images within the flash device. # # Regions must be defined in ascending order and may not overlap. # # A Layout Region start with a eight digit hex offset (leading "0x" required) followed by # the pipe "|" character, followed by the size of the region, also in hex with the leading # "0x" characters. Like: # Offset|Size # PcdOffsetCName|PcdSizeCName # RegionType # ################################################################################ 0x00000000|0x00200000 gEmbeddedTokenSpaceGuid.PcdFlashFvMainBase|gEmbeddedTokenSpaceGuid.PcdFlashFvMainSize FV = FVMAIN_COMPACT ################################################################################ # # FV Section # # [FV] section is used to define what components or modules are placed within a flash # device file. This section also defines order the components and modules are positioned # within the image. The [FV] section consists of define statements, set statements and # module statements. # ################################################################################ [FV.FVMAIN_SEC] FvAlignment = 8 ERASE_POLARITY = 1 MEMORY_MAPPED = TRUE STICKY_WRITE = TRUE LOCK_CAP = TRUE LOCK_STATUS = TRUE WRITE_DISABLED_CAP = TRUE WRITE_ENABLED_CAP = TRUE WRITE_STATUS = TRUE WRITE_LOCK_CAP = TRUE WRITE_LOCK_STATUS = TRUE READ_DISABLED_CAP = TRUE READ_ENABLED_CAP = TRUE READ_STATUS = TRUE READ_LOCK_CAP = TRUE READ_LOCK_STATUS = TRUE INF ArmPlatformPkg/Sec/Sec.inf [FV.FvMain] BlockSize = 0x40 NumBlocks = 0 # This FV gets compressed so make it just big enough FvAlignment = 8 # FV alignment and FV attributes setting. ERASE_POLARITY = 1 MEMORY_MAPPED = TRUE STICKY_WRITE = TRUE LOCK_CAP = TRUE LOCK_STATUS = TRUE WRITE_DISABLED_CAP = TRUE WRITE_ENABLED_CAP = TRUE WRITE_STATUS = TRUE WRITE_LOCK_CAP = TRUE WRITE_LOCK_STATUS = TRUE READ_DISABLED_CAP = TRUE READ_ENABLED_CAP = TRUE READ_STATUS = TRUE READ_LOCK_CAP = TRUE READ_LOCK_STATUS = TRUE INF MdeModulePkg/Core/Dxe/DxeMain.inf # # PI DXE Drivers producing Architectural Protocols (EFI Services) # INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf INF EmbeddedPkg/EmbeddedMonotonicCounter/EmbeddedMonotonicCounter.inf INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf INF EmbeddedPkg/SimpleTextInOutSerial/SimpleTextInOutSerial.inf INF ArmPkg/Drivers/PL390Gic/PL390GicDxe.inf INF ArmPlatformPkg/Drivers/SP804TimerDxe/SP804TimerDxe.inf INF ArmPlatformPkg/ArmVExpressPkg/NorFlashDxe/NorFlashDxe.inf # # Semi-hosting filesystem # INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf # # FAT filesystem + GPT/MBR partitioning # INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf INF FatPkg/EnhancedFatDxe/Fat.inf INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf # # Multimedia Card Interface # INF EmbeddedPkg/Universal/MmcDxe/MmcDxe.inf INF ArmPkg/Drivers/PL180MciDxe/PL180MciDxe.inf # # UEFI application (Shell Embedded Boot Loader) # INF EmbeddedPkg/Ebl/Ebl.inf # # Bds # INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf INF ArmPlatformPkg/Bds/Bds.inf [FV.FVMAIN_COMPACT] FvAlignment = 8 ERASE_POLARITY = 1 MEMORY_MAPPED = TRUE STICKY_WRITE = TRUE LOCK_CAP = TRUE LOCK_STATUS = TRUE WRITE_DISABLED_CAP = TRUE WRITE_ENABLED_CAP = TRUE WRITE_STATUS = TRUE WRITE_LOCK_CAP = TRUE WRITE_LOCK_STATUS = TRUE READ_DISABLED_CAP = TRUE READ_ENABLED_CAP = TRUE READ_STATUS = TRUE READ_LOCK_CAP = TRUE READ_LOCK_STATUS = TRUE INF ArmPlatformPkg/PrePeiCore/PrePeiCoreMPCore.inf INF MdeModulePkg/Core/Pei/PeiMain.inf INF ArmPlatformPkg/PlatformPei/PlatformPei.inf INF ArmPlatformPkg/MemoryInitPei/MemoryInitPei.inf INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 { SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE { SECTION FV_IMAGE = FVMAIN } } ################################################################################ # # Rules are use with the [FV] section's module INF type to define # how an FFS file is created for a given INF file. The following Rule are the default # rules for the different module type. User can add the customized rules to define the # content of the FFS file. # ################################################################################ ############################################################################ # Example of a DXE_DRIVER FFS file with a Checksum encapsulation section # ############################################################################ # #[Rule.Common.DXE_DRIVER] # FILE DRIVER = $(NAMED_GUID) { # DXE_DEPEX DXE_DEPEX Optional |.depex # COMPRESS PI_STD { # GUIDED { # PE32 PE32 |.efi # UI STRING="$(MODULE_NAME)" Optional # VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER) # } # } # } # ############################################################################ [Rule.Common.SEC] FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED { TE TE Align = 32 |.efi } [Rule.Common.PEI_CORE] FILE PEI_CORE = $(NAMED_GUID) { TE TE |.efi UI STRING ="$(MODULE_NAME)" Optional } [Rule.Common.PEIM] FILE PEIM = $(NAMED_GUID) { PEI_DEPEX PEI_DEPEX Optional |.depex TE TE |.efi UI STRING="$(MODULE_NAME)" Optional } [Rule.Common.PEIM.TIANOCOMPRESSED] FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 { PEI_DEPEX PEI_DEPEX Optional |.depex GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE { PE32 PE32 |.efi UI STRING="$(MODULE_NAME)" Optional } } [Rule.Common.DXE_CORE] FILE DXE_CORE = $(NAMED_GUID) { PE32 PE32 |.efi UI STRING="$(MODULE_NAME)" Optional } [Rule.Common.UEFI_DRIVER] FILE DRIVER = $(NAMED_GUID) { DXE_DEPEX DXE_DEPEX Optional |.depex PE32 PE32 |.efi UI STRING="$(MODULE_NAME)" Optional } [Rule.Common.DXE_DRIVER] FILE DRIVER = $(NAMED_GUID) { DXE_DEPEX DXE_DEPEX Optional |.depex PE32 PE32 |.efi UI STRING="$(MODULE_NAME)" Optional } [Rule.Common.DXE_RUNTIME_DRIVER] FILE DRIVER = $(NAMED_GUID) { DXE_DEPEX DXE_DEPEX Optional |.depex PE32 PE32 |.efi UI STRING="$(MODULE_NAME)" Optional } [Rule.Common.UEFI_APPLICATION] FILE APPLICATION = $(NAMED_GUID) { UI STRING ="$(MODULE_NAME)" Optional PE32 PE32 |.efi }