/** @file
Generic debug support macros, typedefs and prototypes for IA32/x64.
Copyright (c) 2006 - 2010, Intel Corporation. All rights reserved.
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#ifndef _DEBUG_SUPPORT_H_
#define _DEBUG_SUPPORT_H_
#include
#include
#include
#include
#include
#include
#include
#include
#include
#define NUM_IDT_ENTRIES 0x78
#define SYSTEM_TIMER_VECTOR 0x68
typedef
VOID
(*DEBUG_PROC) (
VOID
);
typedef
VOID
(EFIAPI *CALLBACK_FUNC) (
);
typedef struct {
IA32_IDT_GATE_DESCRIPTOR OrigDesc;
DEBUG_PROC OrigVector;
IA32_IDT_GATE_DESCRIPTOR NewDesc;
DEBUG_PROC StubEntry;
CALLBACK_FUNC RegisteredCallback;
} IDT_ENTRY;
extern UINT8 InterruptEntryStub[];
extern UINT32 StubSize;
extern VOID (*OrigVector) (VOID);
extern IDT_ENTRY *IdtEntryTable;
extern IA32_IDT_GATE_DESCRIPTOR NullDesc;
/**
Generic IDT entry.
**/
VOID
CommonIdtEntry (
VOID
);
/**
Check whether FXSTOR is supported
@retval TRUE FXSTOR is supported.
@retval FALSE FXSTOR is not supported.
**/
BOOLEAN
FxStorSupport (
VOID
);
/**
Encodes an IDT descriptor with the given physical address.
@param DestDesc The IDT descriptor address.
@param Vecotr The interrupt vector entry.
**/
VOID
Vect2Desc (
IA32_IDT_GATE_DESCRIPTOR * DestDesc,
VOID (*Vector) (VOID)
);
/**
Initializes driver's handler registration database.
This code executes in boot services context
Must be public because it's referenced from DebugSupport.c
@retval EFI_UNSUPPORTED If IA32 processor does not support FXSTOR/FXRSTOR instructions,
the context save will fail, so these processor's are not supported.
@retval EFI_OUT_OF_RESOURCES Fails to allocate memory.
@retval EFI_SUCCESS Initializes successfully.
**/
EFI_STATUS
PlInitializeDebugSupportDriver (
VOID
);
/**
This is the callback that is written to the LoadedImage protocol instance
on the image handle. It uninstalls all registered handlers and frees all entry
stub memory.
@param ImageHandle The firmware allocated handle for the EFI image.
@retval EFI_SUCCESS Always.
**/
EFI_STATUS
EFIAPI
PlUnloadDebugSupportDriver (
IN EFI_HANDLE ImageHandle
);
/**
Returns the maximum value that may be used for the ProcessorIndex parameter in
RegisterPeriodicCallback() and RegisterExceptionCallback().
Hard coded to support only 1 processor for now.
@param This A pointer to the EFI_DEBUG_SUPPORT_PROTOCOL instance.
@param MaxProcessorIndex Pointer to a caller-allocated UINTN in which the maximum supported
processor index is returned. Always 0 returned.
@retval EFI_SUCCESS Always returned with **MaxProcessorIndex set to 0.
**/
EFI_STATUS
EFIAPI
GetMaximumProcessorIndex (
IN EFI_DEBUG_SUPPORT_PROTOCOL *This,
OUT UINTN *MaxProcessorIndex
);
/**
Registers a function to be called back periodically in interrupt context.
@param This A pointer to the EFI_DEBUG_SUPPORT_PROTOCOL instance.
@param ProcessorIndex Specifies which processor the callback function applies to.
@param PeriodicCallback A pointer to a function of type PERIODIC_CALLBACK that is the main
periodic entry point of the debug agent.
@retval EFI_SUCCESS The function completed successfully.
@retval EFI_ALREADY_STARTED Non-NULL PeriodicCallback parameter when a callback
function was previously registered.
@retval EFI_OUT_OF_RESOURCES System has insufficient memory resources to register new callback
function.
**/
EFI_STATUS
EFIAPI
RegisterPeriodicCallback (
IN EFI_DEBUG_SUPPORT_PROTOCOL *This,
IN UINTN ProcessorIndex,
IN EFI_PERIODIC_CALLBACK PeriodicCallback
);
/**
Registers a function to be called when a given processor exception occurs.
This code executes in boot services context.
@param This A pointer to the EFI_DEBUG_SUPPORT_PROTOCOL instance.
@param ProcessorIndex Specifies which processor the callback function applies to.
@param ExceptionCallback A pointer to a function of type EXCEPTION_CALLBACK that is called
when the processor exception specified by ExceptionType occurs.
@param ExceptionType Specifies which processor exception to hook.
@retval EFI_SUCCESS The function completed successfully.
@retval EFI_ALREADY_STARTED Non-NULL PeriodicCallback parameter when a callback
function was previously registered.
@retval EFI_OUT_OF_RESOURCES System has insufficient memory resources to register new callback
function.
**/
EFI_STATUS
EFIAPI
RegisterExceptionCallback (
IN EFI_DEBUG_SUPPORT_PROTOCOL *This,
IN UINTN ProcessorIndex,
IN EFI_EXCEPTION_CALLBACK ExceptionCallback,
IN EFI_EXCEPTION_TYPE ExceptionType
);
/**
Invalidates processor instruction cache for a memory range. Subsequent execution in this range
causes a fresh memory fetch to retrieve code to be executed.
@param This A pointer to the EFI_DEBUG_SUPPORT_PROTOCOL instance.
@param ProcessorIndex Specifies which processor's instruction cache is to be invalidated.
@param Start Specifies the physical base of the memory range to be invalidated.
@param Length Specifies the minimum number of bytes in the processor's instruction
cache to invalidate.
@retval EFI_SUCCESS Always returned.
**/
EFI_STATUS
EFIAPI
InvalidateInstructionCache (
IN EFI_DEBUG_SUPPORT_PROTOCOL *This,
IN UINTN ProcessorIndex,
IN VOID *Start,
IN UINT64 Length
);
/**
Allocate pool for a new IDT entry stub.
Copy the generic stub into the new buffer and fixup the vector number
and jump target address.
@param ExceptionType This is the exception type that the new stub will be created
for.
@param Stub On successful exit, *Stub contains the newly allocated entry stub.
**/
VOID
CreateEntryStub (
IN EFI_EXCEPTION_TYPE ExceptionType,
OUT VOID **Stub
);
/**
Get Interrupt Handle from IDT Gate Descriptor.
@param IdtGateDecriptor IDT Gate Descriptor.
@return Interrupt Handle stored in IDT Gate Descriptor.
**/
UINTN
GetInterruptHandleFromIdt (
IN IA32_IDT_GATE_DESCRIPTOR *IdtGateDecriptor
);
/**
This is the main worker function that manages the state of the interrupt
handlers. It both installs and uninstalls interrupt handlers based on the
value of NewCallback. If NewCallback is NULL, then uninstall is indicated.
If NewCallback is non-NULL, then install is indicated.
@param NewCallback If non-NULL, NewCallback specifies the new handler to register.
If NULL, specifies that the previously registered handler should
be uninstalled.
@param ExceptionType Indicates which entry to manage.
@retval EFI_SUCCESS Process is ok.
@retval EFI_INVALID_PARAMETER Requested uninstalling a handler from a vector that has
no handler registered for it
@retval EFI_ALREADY_STARTED Requested install to a vector that already has a handler registered.
@retval others Possible return values are passed through from UnHookEntry and HookEntry.
**/
EFI_STATUS
ManageIdtEntryTable (
CALLBACK_FUNC NewCallback,
EFI_EXCEPTION_TYPE ExceptionType
);
/**
Creates a nes entry stub. Then saves the current IDT entry and replaces it
with an interrupt gate for the new entry point. The IdtEntryTable is updated
with the new registered function.
This code executes in boot services context. The stub entry executes in interrupt
context.
@param ExceptionType Specifies which vector to hook.
@param NewCallback A pointer to the new function to be registered.
**/
VOID
HookEntry (
IN EFI_EXCEPTION_TYPE ExceptionType,
IN CALLBACK_FUNC NewCallback
);
/**
Undoes HookEntry. This code executes in boot services context.
@param ExceptionType Specifies which entry to unhook
**/
VOID
UnhookEntry (
IN EFI_EXCEPTION_TYPE ExceptionType
);
#endif