/** @file CPU DXE AP Startup Copyright (c) 2008 - 2012, Intel Corporation. All rights reserved.
This program and the accompanying materials are licensed and made available under the terms and conditions of the BSD License which accompanies this distribution. The full text of the license may be found at http://opensource.org/licenses/bsd-license.php THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. **/ #include "CpuDxe.h" #include "CpuGdt.h" #include "CpuMp.h" #pragma pack(1) typedef struct { UINT8 JmpToCli[2]; UINT16 GdtLimit; UINT32 GdtBase; UINT8 Cli; UINT8 MovAxRealSegment; UINT16 RealSegment; UINT8 MovDsAx[2]; UINT8 MovBxGdtr[3]; UINT8 LoadGdt[5]; UINT8 MovEaxCr0[2]; UINT32 MovEaxCr0Value; UINT8 MovCr0Eax[3]; UINT8 FarJmp32Flat[2]; UINT32 FlatJmpOffset; UINT16 FlatJmpSelector; // // Now in IA32 // UINT8 MovEaxCr4; UINT32 MovEaxCr4Value; UINT8 MovCr4Eax[3]; UINT8 MoveDataSelectorIntoAx[2]; UINT16 FlatDataSelector; UINT8 MoveFlatDataSelectorFromAxToDs[2]; UINT8 MoveFlatDataSelectorFromAxToEs[2]; UINT8 MoveFlatDataSelectorFromAxToFs[2]; UINT8 MoveFlatDataSelectorFromAxToGs[2]; UINT8 MoveFlatDataSelectorFromAxToSs[2]; #if defined (MDE_CPU_X64) // // Transition to X64 // UINT8 MovEaxCr3; UINT32 Cr3Value; UINT8 MovCr3Eax[3]; UINT8 MoveCr4ToEax[3]; UINT8 SetCr4Bit5[4]; UINT8 MoveEaxToCr4[3]; UINT8 MoveLongModeEnableMsrToEcx[5]; UINT8 ReadLmeMsr[2]; UINT8 SetLongModeEnableBit[4]; UINT8 WriteLmeMsr[2]; UINT8 MoveCr0ToEax[3]; UINT8 SetCr0PagingBit[4]; UINT8 MoveEaxToCr0[3]; //UINT8 DeadLoop[2]; UINT8 FarJmp32LongMode; UINT32 LongJmpOffset; UINT16 LongJmpSelector; #endif // defined (MDE_CPU_X64) #if defined (MDE_CPU_X64) UINT8 MovEaxOrRaxCpuDxeEntry[2]; UINTN CpuDxeEntryValue; #else UINT8 MovEaxOrRaxCpuDxeEntry; UINTN CpuDxeEntryValue; #endif UINT8 JmpToCpuDxeEntry[2]; } STARTUP_CODE; #pragma pack() /** This .asm code used for translating processor from 16 bit real mode into 64 bit long mode. which help to create the mStartupCodeTemplate value. To assemble: * nasm -o ApStartup ApStartup.asm Then disassemble: * ndisasm -b 16 ApStartup * ndisasm -b 16 -e 6 ApStartup * ndisasm -b 32 -e 32 ApStartup (This -e offset may need adjustment) * ndisasm -b 64 -e 0x83 ApStartup (This -e offset may need adjustment) %define DEFAULT_CR0 0x00000023 %define DEFAULT_CR4 0x640 BITS 16 jmp short TransitionFromReal16To32BitFlat ALIGN 2 Gdtr: dw 0x5a5a dd 0x5a5a5a5a ; ; Modified: EAX, EBX ; TransitionFromReal16To32BitFlat: cli mov ax, 0x5a5a mov ds, ax mov bx, Gdtr o32 lgdt [ds:bx] mov eax, cr4 btc eax, 5 mov cr4, eax mov eax, DEFAULT_CR0 mov cr0, eax jmp 0x5a5a:dword jumpTo32BitAndLandHere BITS 32 jumpTo32BitAndLandHere: mov eax, DEFAULT_CR4 mov cr4, eax mov ax, 0x5a5a mov ds, ax mov es, ax mov fs, ax mov gs, ax mov ss, ax ; ; Jump to CpuDxe for IA32 ; mov eax, 0x5a5a5a5a or eax, eax jz Transition32FlatTo64Flat jmp eax ; ; Transition to X64 ; Transition32FlatTo64Flat: mov eax, 0x5a5a5a5a mov cr3, eax mov eax, cr4 bts eax, 5 ; enable PAE mov cr4, eax mov ecx, 0xc0000080 rdmsr bts eax, 8 ; set LME wrmsr mov eax, cr0 bts eax, 31 ; set PG mov cr0, eax ; enable paging ; ; Jump to CpuDxe for X64 ; jmp 0x5a5a:jumpTo64BitAndLandHere BITS 64 jumpTo64BitAndLandHere: mov rax, 0xcdcdcdcdcdcdcdcd jmp rax **/ STARTUP_CODE mStartupCodeTemplate = { { 0xeb, 0x06 }, // Jump to cli 0, // GDT Limit 0, // GDT Base 0xfa, // cli (Clear Interrupts) 0xb8, 0x0000, // mov ax, RealSegment { 0x8e, 0xd8 }, // mov ds, ax { 0xBB, 0x02, 0x00 }, // mov bx, Gdtr { 0x3e, 0x66, 0x0f, 0x01, 0x17 }, // lgdt [ds:bx] { 0x66, 0xB8 }, 0x00000023, // mov eax, cr0 value { 0x0F, 0x22, 0xC0 }, // mov cr0, eax { 0x66, 0xEA }, // far jmp to 32-bit flat OFFSET_OF(STARTUP_CODE, MovEaxCr4), LINEAR_CODE_SEL, 0xB8, 0x00000640, // mov eax, cr4 value { 0x0F, 0x22, 0xe0 }, // mov cr4, eax { 0x66, 0xb8 }, CPU_DATA_SEL, // mov ax, FlatDataSelector { 0x8e, 0xd8 }, // mov ds, ax { 0x8e, 0xc0 }, // mov es, ax { 0x8e, 0xe0 }, // mov fs, ax { 0x8e, 0xe8 }, // mov gs, ax { 0x8e, 0xd0 }, // mov ss, ax #if defined (MDE_CPU_X64) 0xB8, 0x00000000, // mov eax, cr3 value { 0x0F, 0x22, 0xd8 }, // mov cr3, eax { 0x0F, 0x20, 0xE0 }, // mov eax, cr4 { 0x0F, 0xBA, 0xE8, 0x05 }, // bts eax, 5 { 0x0F, 0x22, 0xE0 }, // mov cr4, eax { 0xB9, 0x80, 0x00, 0x00, 0xC0 }, // mov ecx, 0xc0000080 { 0x0F, 0x32 }, // rdmsr { 0x0F, 0xBA, 0xE8, 0x08 }, // bts eax, 8 { 0x0F, 0x30 }, // wrmsr { 0x0F, 0x20, 0xC0 }, // mov eax, cr0 { 0x0F, 0xBA, 0xE8, 0x1F }, // bts eax, 31 { 0x0F, 0x22, 0xC0 }, // mov cr0, eax 0xEA, // FarJmp32LongMode OFFSET_OF(STARTUP_CODE, MovEaxOrRaxCpuDxeEntry), LINEAR_CODE64_SEL, #endif // defined (MDE_CPU_X64) //0xeb, 0xfe, // jmp $ #if defined (MDE_CPU_X64) { 0x48, 0xb8 }, 0x0, // mov rax, X64 CpuDxe MP Entry Point #else 0xB8, 0x0, // mov eax, IA32 CpuDxe MP Entry Point #endif { 0xff, 0xe0 }, // jmp to eax/rax (CpuDxe MP Entry Point) }; volatile STARTUP_CODE *StartupCode = NULL; /** Prepares Startup Code for APs. This function prepares Startup Code for APs. @retval EFI_SUCCESS The APs were started @retval EFI_OUT_OF_RESOURCES Cannot allocate memory to start APs **/ EFI_STATUS PrepareAPStartupCode ( VOID ) { EFI_STATUS Status; IA32_DESCRIPTOR Gdtr; EFI_PHYSICAL_ADDRESS StartAddress; StartAddress = BASE_1MB; Status = gBS->AllocatePages ( AllocateMaxAddress, EfiACPIMemoryNVS, EFI_SIZE_TO_PAGES (sizeof (*StartupCode)), &StartAddress ); if (EFI_ERROR (Status)) { return Status; } StartupCode = (STARTUP_CODE*)(VOID*)(UINTN) StartAddress; CopyMem ((VOID*) StartupCode, &mStartupCodeTemplate, sizeof (*StartupCode)); StartupCode->RealSegment = (UINT16) (((UINTN) StartAddress) >> 4); AsmReadGdtr (&Gdtr); StartupCode->GdtLimit = Gdtr.Limit; StartupCode->GdtBase = (UINT32) Gdtr.Base; StartupCode->CpuDxeEntryValue = (UINTN) AsmApEntryPoint; StartupCode->FlatJmpOffset += (UINT32) StartAddress; #if defined (MDE_CPU_X64) StartupCode->Cr3Value = (UINT32) AsmReadCr3 (); StartupCode->LongJmpOffset += (UINT32) StartAddress; #endif return EFI_SUCCESS; } /** Free the code buffer of startup AP. **/ VOID FreeApStartupCode ( VOID ) { if (StartupCode != NULL) { gBS->FreePages ((EFI_PHYSICAL_ADDRESS)(UINTN)(VOID*) StartupCode, EFI_SIZE_TO_PAGES (sizeof (*StartupCode))); } } /** Starts the Application Processors and directs them to jump to the specified routine. The processor jumps to this code in flat mode, but the processor's stack is not initialized. @retval EFI_SUCCESS The APs were started **/ EFI_STATUS StartApsStackless ( VOID ) { SendInitSipiSipiAllExcludingSelf ((UINT32)(UINTN)(VOID*) StartupCode); // // Wait 100 milliseconds for APs to arrive at the ApEntryPoint routine // MicroSecondDelay (100 * 1000); return EFI_SUCCESS; }