/*++

  Copyright (c) 2006 - 2007, Intel Corporation<BR>
  All rights reserved. This program and the accompanying materials
  are licensed and made available under the terms and conditions of the BSD License
  which accompanies this distribution.  The full text of the license may be found at
  http://opensource.org/licenses/bsd-license.php

  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

Module Name:

  IsaFloppyCtrl.c

Abstract:

  ISA Floppy Driver
  1. Support two types diskette drive
     1.44M drive and 2.88M drive (and now only support 1.44M)
  2. Support two diskette drives
  3. Use DMA channel 2 to transfer data
  4. Do not use interrupt
  5. Support diskette change line signal and write protect

  The internal function for the floppy driver

Revision History:

--*/

#include "IsaFloppy.h"

EFI_STATUS
DiscoverFddDevice (
  IN FDC_BLK_IO_DEV  *FdcDev
  )
/*++

  Routine Description:  Detect the floppy drive is presented or not
  Parameters:
    FdcDev FDC_BLK_IO_DEV * : A pointer to the Data Structure FDC_BLK_IO_DEV
  Returns:
    EFI_SUCCESS    Drive is presented
    EFI_NOT_FOUND  Drive is not presented

--*/
// GC_TODO: function comment is missing 'Arguments:'
// GC_TODO:    FdcDev - add argument and description to function comment
{
  EFI_STATUS  Status;

  FdcDev->BlkIo.Media = &FdcDev->BlkMedia;

  //
  // Call FddIndentify subroutine
  //
  Status = FddIdentify (FdcDev);
  if (EFI_ERROR (Status)) {
    return EFI_NOT_FOUND;
  }

  FdcDev->BlkIo.Reset               = FdcReset;
  FdcDev->BlkIo.FlushBlocks         = FddFlushBlocks;
  FdcDev->BlkIo.ReadBlocks          = FddReadBlocks;
  FdcDev->BlkIo.WriteBlocks         = FddWriteBlocks;
  FdcDev->BlkMedia.LogicalPartition = FALSE;
  FdcDev->BlkMedia.WriteCaching     = FALSE;

  return EFI_SUCCESS;
}

EFI_STATUS
FddIdentify (
  IN FDC_BLK_IO_DEV  *FdcDev
  )
/*++

  Routine Description:   Do recalibrate  and see the drive is presented or not
         Set the media parameters
  Parameters:
    FdcDev FDC_BLK_IO_DEV * : A pointer to the Data Structure FDC_BLK_IO_DEV
  Returns:
    EFI_SUCCESS:
    EFI_DEVICE_ERROR:

--*/
// GC_TODO: function comment is missing 'Arguments:'
// GC_TODO:    FdcDev - add argument and description to function comment
{
  EFI_STATUS  Status;

  //
  // Set Floppy Disk Controller's motor on
  //
  Status = MotorOn (FdcDev);
  if (EFI_ERROR (Status)) {
    return EFI_DEVICE_ERROR;
  }

  Status = Recalibrate (FdcDev);

  if (EFI_ERROR (Status)) {
    MotorOff (FdcDev);
    FdcDev->ControllerState->NeedRecalibrate = TRUE;
    return EFI_DEVICE_ERROR;
  }
  //
  // Set Media Parameter
  //
  FdcDev->BlkIo.Media->RemovableMedia = TRUE;
  FdcDev->BlkIo.Media->MediaPresent   = TRUE;
  //
  // investigate
  //
  FdcDev->BlkIo.Media->MediaId = 0;

  //
  // Check Media
  //
  Status = DisketChanged (FdcDev);

  if (Status == EFI_NO_MEDIA) {
    FdcDev->BlkIo.Media->MediaPresent = FALSE;
  } else if (Status != EFI_MEDIA_CHANGED) {
    MotorOff (FdcDev);
    return Status;
  }

  //
  // Check Disk Write Protected
  //
  Status = SenseDrvStatus (FdcDev, 0);

  if (Status == EFI_WRITE_PROTECTED) {
    FdcDev->BlkIo.Media->ReadOnly = TRUE;
  } else if (Status == EFI_SUCCESS) {
    FdcDev->BlkIo.Media->ReadOnly = FALSE;
  } else {
    return EFI_DEVICE_ERROR;
  }

  MotorOff (FdcDev);

  //
  // Set Media Default Type
  //
  FdcDev->BlkIo.Media->BlockSize  = DISK_1440K_BYTEPERSECTOR;
  FdcDev->BlkIo.Media->LastBlock  = DISK_1440K_EOT * 2 * (DISK_1440K_MAXTRACKNUM + 1) - 1;

  return EFI_SUCCESS;
}

EFI_STATUS
FddReset (
  IN FDC_BLK_IO_DEV  *FdcDev
  )
/*++

  Routine Description:  Reset the Floppy Logic Drive
  Parameters:
    FdcDev FDC_BLK_IO_DEV * : A pointer to the Data Structure FDC_BLK_IO_DEV
  Returns:
    EFI_SUCCESS:    The Floppy Logic Drive is reset
    EFI_DEVICE_ERROR: The Floppy Logic Drive is not functioning correctly and
                      can not be reset

--*/
// GC_TODO: function comment is missing 'Arguments:'
// GC_TODO:    FdcDev - add argument and description to function comment
{
  UINT8 data;
  UINT8 StatusRegister0;
  UINT8 PresentCylinderNumber;
  UINTN Index;

  //
  // Report reset progress code
  //
  REPORT_STATUS_CODE_WITH_DEVICE_PATH (
    EFI_PROGRESS_CODE,
    EFI_PERIPHERAL_REMOVABLE_MEDIA | EFI_P_PC_RESET,
    FdcDev->DevicePath
    );

  //
  // Reset specified Floppy Logic Drive according to FdcDev -> Disk
  // Set Digital Output Register(DOR) to do reset work
  //   bit0 & bit1 of DOR : Drive Select
  //   bit2 : Reset bit
  //   bit3 : DMA and Int bit
  // Reset : a "0" written to bit2 resets the FDC, this reset will remain
  //         active until
  //         a "1" is written to this bit.
  // Reset step 1:
  //         use bit0 & bit1 to  select the logic drive
  //         write "0" to bit2
  //
  data = 0x0;
  data = (UINT8) (data | (SELECT_DRV & FdcDev->Disk));
  FdcWritePort (FdcDev, FDC_REGISTER_DOR, data);

  //
  // wait some time,at least 120us
  //
  MicroSecondDelay (500);

  //
  // Reset step 2:
  //   write "1" to bit2
  //   write "1" to bit3 : enable DMA
  //
  data |= 0x0C;
  FdcWritePort (FdcDev, FDC_REGISTER_DOR, data);

  //
  // Experience value
  //
  MicroSecondDelay (2000);

  //
  // wait specified floppy logic drive is not busy
  //
  if (EFI_ERROR (FddWaitForBSYClear (FdcDev, 1))) {
    return EFI_DEVICE_ERROR;
  }
  //
  // Set the Transfer Data Rate
  //
  FdcWritePort (FdcDev, FDC_REGISTER_CCR, 0x0);

  //
  // Experience value
  //
  MicroSecondDelay (100);

  //
  // Issue Sense interrupt command for each drive (total 4 drives)
  //
  for (Index = 0; Index < 4; Index++) {
    if (EFI_ERROR (SenseIntStatus (FdcDev, &StatusRegister0, &PresentCylinderNumber))) {
      return EFI_DEVICE_ERROR;
    }
  }
  //
  // issue Specify command
  //
  if (EFI_ERROR (Specify (FdcDev))) {
    return EFI_DEVICE_ERROR;
  }

  return EFI_SUCCESS;
}

EFI_STATUS
MotorOn (
  IN FDC_BLK_IO_DEV  *FdcDev
  )
/*++

  Routine Description:  Turn the drive's motor on
        The drive's motor must be on before any command can be executed
  Parameters:
    FdcDev FDC_BLK_IO_DEV * : A pointer to the Data Structure FDC_BLK_IO_DEV
  Returns:
    EFI_SUCCESS:       Turn the drive's motor on successfully
    EFI_DEVICE_ERROR:    The drive is busy, so can not turn motor on
    EFI_INVALID_PARAMETER: Fail to Set timer(Cancel timer)

--*/
// GC_TODO: function comment is missing 'Arguments:'
// GC_TODO:    FdcDev - add argument and description to function comment
{
  EFI_STATUS  Status;
  UINT8       data;

  //
  // Control of the floppy drive motors is a big pain. If motor is off, you have
  // to turn it on first. But you can not leave the motor on all the time, since
  // that would wear out the disk. On the other hand, if you turn the motor off
  // after each operation, the system performance will be awful. The compromise
  // used in this driver is to leave the motor on for 2 seconds after
  // each operation. If a new operation is started in that interval(2s),
  // the motor need not be turned on again. If no new operation is started,
  // a timer goes off and the motor is turned off
  //
  //
  // Cancel the timer
  //
  Status = gBS->SetTimer (FdcDev->Event, TimerCancel, 0);

  if (EFI_ERROR (Status)) {
    return EFI_INVALID_PARAMETER;
  }
  //
  // Get the motor status
  //
  data = FdcReadPort (FdcDev, FDC_REGISTER_DOR);

  if (((FdcDev->Disk == FDC_DISK0) && ((data & 0x10) == 0x10)) ||
      ((FdcDev->Disk == FDC_DISK1) && ((data & 0x21) == 0x21))
      ) {
    return EFI_SUCCESS;
  }
  //
  // The drive's motor is off, so need turn it on
  // first look at command and drive are busy or not
  //
  if (EFI_ERROR (FddWaitForBSYClear (FdcDev, 1))) {
    return EFI_DEVICE_ERROR;
  }
  //
  // for drive A: 1CH, drive B: 2DH
  //
  data = 0x0C;
  data = (UINT8) (data | (SELECT_DRV & FdcDev->Disk));
  if (FdcDev->Disk == FDC_DISK0) {
    //
    // drive A
    //
    data |= DRVA_MOTOR_ON;
  } else {
    //
    // drive B
    //
    data |= DRVB_MOTOR_ON;
  }

  FdcWritePort (FdcDev, FDC_REGISTER_DOR, data);

  //
  // Experience value
  //
  MicroSecondDelay (4000);

  return EFI_SUCCESS;
}

EFI_STATUS
MotorOff (
  IN FDC_BLK_IO_DEV  *FdcDev
  )
/*++

  Routine Description:  Set a Timer and when Timer goes off, turn the motor off
  Parameters:
    FdcDev FDC_BLK_IO_DEV * : A pointer to the Data Structure FDC_BLK_IO_DEV
  Returns:
    EFI_SUCCESS:       Set the Timer successfully
    EFI_INVALID_PARAMETER: Fail to Set the timer

--*/
// GC_TODO: function comment is missing 'Arguments:'
// GC_TODO:    FdcDev - add argument and description to function comment
{
  //
  // Set the timer : 2s
  //
  return gBS->SetTimer (FdcDev->Event, TimerRelative, 20000000);
}

EFI_STATUS
DisketChanged (
  IN FDC_BLK_IO_DEV  *FdcDev
  )
/*++

  Routine Description:  Detect the disk in the drive is changed or not
  Parameters:
    FdcDev FDC_BLK_IO_DEV *: A pointer to Data Structure FDC_BLK_IO_DEV
  Returns:
    EFI_SUCCESS:    No disk media change
    EFI_DEVICE_ERROR: Fail to do the recalibrate or seek operation
    EFI_NO_MEDIA:   No disk in the drive
    EFI_MEDIA_CHANGED:  There is a new disk in the drive

--*/
// GC_TODO: function comment is missing 'Arguments:'
// GC_TODO:    FdcDev - add argument and description to function comment
{
  EFI_STATUS  Status;
  UINT8       data;

  //
  // Check change line
  //
  data = FdcReadPort (FdcDev, FDC_REGISTER_DIR);

  //
  // Io delay
  //
  MicroSecondDelay (50);

  if ((data & DIR_DCL) == 0x80) {
    //
    // disk change line is active
    //
    if (FdcDev->PresentCylinderNumber != 0) {
      Status = Recalibrate (FdcDev);
    } else {
      Status = Seek (FdcDev, 0x30);
    }

    if (EFI_ERROR (Status)) {
      FdcDev->ControllerState->NeedRecalibrate = TRUE;
      return EFI_DEVICE_ERROR;
      //
      // Fail to do the seek or recalibrate operation
      //
    }

    data = FdcReadPort (FdcDev, FDC_REGISTER_DIR);

    //
    // Io delay
    //
    MicroSecondDelay (50);

    if ((data & DIR_DCL) == 0x80) {
      return EFI_NO_MEDIA;
    }

    return EFI_MEDIA_CHANGED;
  }

  return EFI_SUCCESS;
}

EFI_STATUS
Specify (
  IN FDC_BLK_IO_DEV  *FdcDev
  )
/*++

  Routine Description:  Do the Specify command, this command sets DMA operation
                        and the initial values for each of the three internal
                        times: HUT, SRT and HLT
  Parameters:
    None
  Returns:
    EFI_SUCCESS:    Execute the Specify command successfully
    EFI_DEVICE_ERROR: Fail to execute the command

--*/
// GC_TODO: function comment is missing 'Arguments:'
// GC_TODO:    FdcDev - add argument and description to function comment
{
  FDD_SPECIFY_CMD Command;
  UINTN           Index;
  UINT8           *CommandPointer;

  ZeroMem (&Command, sizeof (FDD_SPECIFY_CMD));
  Command.CommandCode = SPECIFY_CMD;
  //
  // set SRT, HUT
  //
  Command.SrtHut = 0xdf;
  //
  // 0xdf;
  //
  // set HLT and DMA
  //
  Command.HltNd   = 0x02;

  CommandPointer  = (UINT8 *) (&Command);
  for (Index = 0; Index < sizeof (FDD_SPECIFY_CMD); Index++) {
    if (EFI_ERROR (DataOutByte (FdcDev, CommandPointer++))) {
      return EFI_DEVICE_ERROR;
    }
  }

  return EFI_SUCCESS;
}

EFI_STATUS
Recalibrate (
  IN FDC_BLK_IO_DEV  *FdcDev
  )
/*++

  Routine Description:  Set the head of floppy drive to track 0
  Parameters:
    FdcDev FDC_BLK_IO_DEV *: A pointer to Data Structure FDC_BLK_IO_DEV
  Returns:
    EFI_SUCCESS:    Execute the Recalibrate operation successfully
    EFI_DEVICE_ERROR: Fail to execute the Recalibrate operation

--*/
// GC_TODO: function comment is missing 'Arguments:'
// GC_TODO:    FdcDev - add argument and description to function comment
{
  FDD_COMMAND_PACKET2 Command;
  UINTN               Index;
  UINT8               StatusRegister0;
  UINT8               PresentCylinderNumber;
  UINT8               *CommandPointer;
  UINT8               Count;

  Count = 2;

  while (Count > 0) {
    ZeroMem (&Command, sizeof (FDD_COMMAND_PACKET2));
    Command.CommandCode = RECALIBRATE_CMD;
    //
    // drive select
    //
    if (FdcDev->Disk == FDC_DISK0) {
      Command.DiskHeadSel = 0;
      //
      // 0
      //
    } else {
      Command.DiskHeadSel = 1;
      //
      // 1
      //
    }

    CommandPointer = (UINT8 *) (&Command);
    for (Index = 0; Index < sizeof (FDD_COMMAND_PACKET2); Index++) {
      if (EFI_ERROR (DataOutByte (FdcDev, CommandPointer++))) {
        return EFI_DEVICE_ERROR;
      }
    }
    //
    // Experience value
    //
    MicroSecondDelay (250000);
    //
    // need modify according to 1.44M or 2.88M
    //
    if (EFI_ERROR (SenseIntStatus (FdcDev, &StatusRegister0, &PresentCylinderNumber))) {
      return EFI_DEVICE_ERROR;
    }

    if ((StatusRegister0 & 0xf0) == 0x20 && PresentCylinderNumber == 0) {
      FdcDev->PresentCylinderNumber             = 0;
      FdcDev->ControllerState->NeedRecalibrate  = FALSE;
      return EFI_SUCCESS;
    } else {
      Count--;
      if (Count == 0) {
        return EFI_DEVICE_ERROR;
      }
    }
  }
  //
  // end while
  //
  return EFI_SUCCESS;
}

EFI_STATUS
Seek (
  IN FDC_BLK_IO_DEV  *FdcDev,
  IN EFI_LBA         Lba
  )
/*++

  Routine Description:  Set the head of floppy drive to the new cylinder
  Parameters:
    FdcDev FDC_BLK_IO_DEV *: A pointer to Data Structure FDC_BLK_IO_DEV
    Lba EFI_LBA     : The logic block address want to seek
  Returns:
    EFI_SUCCESS:    Execute the Seek operation successfully
    EFI_DEVICE_ERROR: Fail to execute the Seek operation

--*/
// GC_TODO: function comment is missing 'Arguments:'
// GC_TODO:    FdcDev - add argument and description to function comment
// GC_TODO:    Lba - add argument and description to function comment
{
  FDD_SEEK_CMD  Command;
  UINT8         EndOfTrack;
  UINT8         Head;
  UINT8         Cylinder;
  UINT8         StatusRegister0;
  UINT8         *CommandPointer;
  UINT8         PresentCylinderNumber;
  UINTN         Index;
  UINT8         DelayTime;

  if (FdcDev->ControllerState->NeedRecalibrate) {
    if (EFI_ERROR (Recalibrate (FdcDev))) {
      FdcDev->ControllerState->NeedRecalibrate = TRUE;
      return EFI_DEVICE_ERROR;
    }
  }

  EndOfTrack = DISK_1440K_EOT;
  //
  // Calculate cylinder based on Lba and EOT
  //
  Cylinder = (UINT8) ((UINTN) Lba / EndOfTrack / 2);

  //
  // if the destination cylinder is the present cylinder, unnecessary to do the
  // seek operation
  //
  if (FdcDev->PresentCylinderNumber == Cylinder) {
    return EFI_SUCCESS;
  }
  //
  // Calculate the head : 0 or 1
  //
  Head = (UINT8) ((UINTN) Lba / EndOfTrack % 2);

  ZeroMem (&Command, sizeof (FDD_SEEK_CMD));
  Command.CommandCode = SEEK_CMD;
  if (FdcDev->Disk == FDC_DISK0) {
    Command.DiskHeadSel = 0;
    //
    // 0
    //
  } else {
    Command.DiskHeadSel = 1;
    //
    // 1
    //
  }

  Command.DiskHeadSel = (UINT8) (Command.DiskHeadSel | (Head << 2));
  Command.NewCylinder = Cylinder;

  CommandPointer      = (UINT8 *) (&Command);
  for (Index = 0; Index < sizeof (FDD_SEEK_CMD); Index++) {
    if (EFI_ERROR (DataOutByte (FdcDev, CommandPointer++))) {
      return EFI_DEVICE_ERROR;
    }
  }
  //
  // Io delay
  //
  MicroSecondDelay (100);

  //
  // Calculate waiting time
  //
  if (FdcDev->PresentCylinderNumber > Cylinder) {
    DelayTime = (UINT8) (FdcDev->PresentCylinderNumber - Cylinder);
  } else {
    DelayTime = (UINT8) (Cylinder - FdcDev->PresentCylinderNumber);
  }

  MicroSecondDelay ((DelayTime + 1) * 4000);

  if (EFI_ERROR (SenseIntStatus (FdcDev, &StatusRegister0, &PresentCylinderNumber))) {
    return EFI_DEVICE_ERROR;
  }

  if ((StatusRegister0 & 0xf0) == 0x20) {
    FdcDev->PresentCylinderNumber = Command.NewCylinder;
    return EFI_SUCCESS;
  } else {
    FdcDev->ControllerState->NeedRecalibrate = TRUE;
    return EFI_DEVICE_ERROR;
  }
}

EFI_STATUS
SenseIntStatus (
  IN     FDC_BLK_IO_DEV  *FdcDev,
  IN OUT UINT8           *StatusRegister0,
  IN OUT UINT8           *PresentCylinderNumber
  )
/*++

  Routine Description:  Do the Sense Interrupt Status command, this command
                        resets the interrupt signal
  Parameters:
    StatusRegister0 UINT8 *: Be used to save Status Register 0 read from FDC
    PresentCylinderNumber  UINT8 *: Be used to save present cylinder number
                                    read from FDC
  Returns:
    EFI_SUCCESS:    Execute the Sense Interrupt Status command successfully
    EFI_DEVICE_ERROR: Fail to execute the command

--*/
// GC_TODO: function comment is missing 'Arguments:'
// GC_TODO:    FdcDev - add argument and description to function comment
// GC_TODO:    StatusRegister0 - add argument and description to function comment
// GC_TODO:    PresentCylinderNumber - add argument and description to function comment
{
  UINT8 command;

  command = SENSE_INT_STATUS_CMD;
  if (EFI_ERROR (DataOutByte (FdcDev, &command))) {
    return EFI_DEVICE_ERROR;
  }

  if (EFI_ERROR (DataInByte (FdcDev, StatusRegister0))) {
    return EFI_DEVICE_ERROR;
  }

  if (EFI_ERROR (DataInByte (FdcDev, PresentCylinderNumber))) {
    return EFI_DEVICE_ERROR;
  }

  return EFI_SUCCESS;
}

EFI_STATUS
SenseDrvStatus (
  IN FDC_BLK_IO_DEV  *FdcDev,
  IN EFI_LBA         Lba
  )
/*++

  Routine Description:  Do the Sense Drive Status command
  Parameters:
    FdcDev FDC_BLK_IO_DEV *: A pointer to Data Structure FDC_BLK_IO_DEV
    Lba EFI_LBA     : Logic block address
  Returns:
    EFI_SUCCESS:    Execute the Sense Drive Status command successfully
    EFI_DEVICE_ERROR: Fail to execute the command
    EFI_WRITE_PROTECTED:The disk is write protected

--*/
// GC_TODO: function comment is missing 'Arguments:'
// GC_TODO:    FdcDev - add argument and description to function comment
// GC_TODO:    Lba - add argument and description to function comment
{
  FDD_COMMAND_PACKET2 Command;
  UINT8               Head;
  UINT8               EndOfTrack;
  UINTN               Index;
  UINT8               StatusRegister3;
  UINT8               *CommandPointer;

  //
  // Sense Drive Status command obtains drive status information,
  // it has not execution phase and goes directly to the result phase from the
  // command phase, Status Register 3 contains the drive status information
  //
  ZeroMem (&Command, sizeof (FDD_COMMAND_PACKET2));
  Command.CommandCode = SENSE_DRV_STATUS_CMD;

  if (FdcDev->Disk == FDC_DISK0) {
    Command.DiskHeadSel = 0;
  } else {
    Command.DiskHeadSel = 1;
  }

  EndOfTrack  = DISK_1440K_EOT;
  Head        = (UINT8) ((UINTN) Lba / EndOfTrack % 2);
  Command.DiskHeadSel = (UINT8) (Command.DiskHeadSel | (Head << 2));

  CommandPointer = (UINT8 *) (&Command);
  for (Index = 0; Index < sizeof (FDD_COMMAND_PACKET2); Index++) {
    if (EFI_ERROR (DataOutByte (FdcDev, CommandPointer++))) {
      return EFI_DEVICE_ERROR;
    }
  }

  if (EFI_ERROR (DataInByte (FdcDev, &StatusRegister3))) {
    return EFI_DEVICE_ERROR;
  }
  //
  // Io delay
  //
  MicroSecondDelay (50);

  //
  // Check Status Register 3 to get drive status information
  //
  return CheckStatus3 (StatusRegister3);
}

EFI_STATUS
DetectMedia (
  IN FDC_BLK_IO_DEV  *FdcDev
  )
/*++

  Routine Description:  Update the disk media properties and if necessary
                        reinstall Block I/O interface
  Parameters:
    FdcDev FDC_BLK_IO_DEV *: A pointer to Data Structure FDC_BLK_IO_DEV
  Returns:
    EFI_SUCCESS:    Do the operation successfully
    EFI_DEVICE_ERROR: Fail to the operation

--*/
// GC_TODO: function comment is missing 'Arguments:'
// GC_TODO:    FdcDev - add argument and description to function comment
{
  EFI_STATUS  Status;
  BOOLEAN     bReset;
  BOOLEAN     bReadOnlyLastTime;
  BOOLEAN     bMediaPresentLastTime;

  bReset                = FALSE;
  bReadOnlyLastTime     = FdcDev->BlkIo.Media->ReadOnly;
  bMediaPresentLastTime = FdcDev->BlkIo.Media->MediaPresent;

  //
  // Check disk change
  //
  Status = DisketChanged (FdcDev);

  if (Status == EFI_MEDIA_CHANGED) {
    FdcDev->BlkIo.Media->MediaId++;
    FdcDev->BlkIo.Media->MediaPresent = TRUE;
    bReset = TRUE;
  } else if (Status == EFI_NO_MEDIA) {
    FdcDev->BlkIo.Media->MediaPresent = FALSE;
  } else if (Status != EFI_SUCCESS) {
    MotorOff (FdcDev);
    return Status;
    //
    // EFI_DEVICE_ERROR
    //
  }

  if (FdcDev->BlkIo.Media->MediaPresent) {
    //
    // Check disk write protected
    //
    Status = SenseDrvStatus (FdcDev, 0);
    if (Status == EFI_WRITE_PROTECTED) {
      FdcDev->BlkIo.Media->ReadOnly = TRUE;
    } else {
      FdcDev->BlkIo.Media->ReadOnly = FALSE;
    }
  }

  if (FdcDev->BlkIo.Media->MediaPresent && (bReadOnlyLastTime != FdcDev->BlkIo.Media->ReadOnly)) {
    bReset = TRUE;
  }

  if (bMediaPresentLastTime != FdcDev->BlkIo.Media->MediaPresent) {
    bReset = TRUE;
  }

  if (bReset) {
    Status = gBS->ReinstallProtocolInterface (
                    FdcDev->Handle,
                    &gEfiBlockIoProtocolGuid,
                    &FdcDev->BlkIo,
                    &FdcDev->BlkIo
                    );

    if (EFI_ERROR (Status)) {
      return Status;
    }
  }

  return EFI_SUCCESS;
}

EFI_STATUS
Setup (
  IN FDC_BLK_IO_DEV  *FdcDev
  )
/*++

  Routine Description: Set the data rate and so on
  Parameters:
    None
  Returns:
    EFI_SUCCESS:

--*/
// GC_TODO: function comment is missing 'Arguments:'
// GC_TODO:    FdcDev - add argument and description to function comment
// GC_TODO:    EFI_DEVICE_ERROR - add return value to function comment
{
  EFI_STATUS  Status;

  //
  // Set data rate 500kbs
  //
  FdcWritePort (FdcDev, FDC_REGISTER_CCR, 0x0);

  //
  // Io delay
  //
  MicroSecondDelay (50);

  Status = Specify (FdcDev);

  if (EFI_ERROR (Status)) {
    return EFI_DEVICE_ERROR;
  }

  return EFI_SUCCESS;
}

EFI_STATUS
ReadWriteDataSector (
  IN  FDC_BLK_IO_DEV  *FdcDev,
  IN  VOID            *HostAddress,
  IN  EFI_LBA         Lba,
  IN  UINTN           NumberOfBlocks,
  IN  BOOLEAN         Read
  )
/*++

  Routine Description: Read or Write a number of blocks in the same cylinder
  Parameters:
    FdcDev FDC_BLK_IO_DEV * : A pointer to Data Structure FDC_BLK_IO_DEV
    Buffer VOID *:
    Lba EFI_LBA:
    NumberOfBlocks UINTN:
    Read BOOLEAN:
  Returns:
    EFI_SUCCESS:

--*/
// GC_TODO: function comment is missing 'Arguments:'
// GC_TODO:    FdcDev - add argument and description to function comment
// GC_TODO:    HostAddress - add argument and description to function comment
// GC_TODO:    Lba - add argument and description to function comment
// GC_TODO:    NumberOfBlocks - add argument and description to function comment
// GC_TODO:    Read - add argument and description to function comment
// GC_TODO:    EFI_DEVICE_ERROR - add return value to function comment
// GC_TODO:    EFI_DEVICE_ERROR - add return value to function comment
// GC_TODO:    EFI_DEVICE_ERROR - add return value to function comment
// GC_TODO:    EFI_TIMEOUT - add return value to function comment
// GC_TODO:    EFI_DEVICE_ERROR - add return value to function comment
{
  EFI_STATUS                                    Status;
  FDD_COMMAND_PACKET1                           Command;
  FDD_RESULT_PACKET                             Result;
  UINTN                                         Index;
  UINTN                                         Times;
  UINT8                                         *CommandPointer;

  EFI_PHYSICAL_ADDRESS                          DeviceAddress;
  EFI_ISA_IO_PROTOCOL                           *IsaIo;
  UINTN                                         NumberofBytes;
  VOID                                          *Mapping;
  EFI_ISA_IO_PROTOCOL_OPERATION                 Operation;
  EFI_STATUS                                    Status1;
  UINT8                                         Channel;
  EFI_ISA_ACPI_RESOURCE                         *ResourceItem;
  UINT32                                        Attribute;

  Status = Seek (FdcDev, Lba);
  if (EFI_ERROR (Status)) {
    return EFI_DEVICE_ERROR;
  }
  //
  // Map Dma
  //
  IsaIo         = FdcDev->IsaIo;
  NumberofBytes = NumberOfBlocks * 512;
  if (Read == READ) {
    Operation = EfiIsaIoOperationSlaveWrite;
  } else {
    Operation = EfiIsaIoOperationSlaveRead;
  }

  ResourceItem  = IsaIo->ResourceList->ResourceItem;
  Index         = 0;
  while (ResourceItem[Index].Type != EfiIsaAcpiResourceEndOfList) {
    if (ResourceItem[Index].Type == EfiIsaAcpiResourceDma) {
      break;
    }

    Index++;
  }

  if (ResourceItem[Index].Type == EfiIsaAcpiResourceEndOfList) {
    return EFI_DEVICE_ERROR;
  }

  Channel   = (UINT8) IsaIo->ResourceList->ResourceItem[Index].StartRange;
  Attribute = IsaIo->ResourceList->ResourceItem[Index].Attribute;

  Status1 = IsaIo->Map (
                    IsaIo,
                    Operation,
                    Channel,
                    Attribute,
                    HostAddress,
                    &NumberofBytes,
                    &DeviceAddress,
                    &Mapping
                    );
  if (EFI_ERROR (Status1)) {
    return Status1;
  }

  //
  // Allocate Read or Write command packet
  //
  ZeroMem (&Command, sizeof (FDD_COMMAND_PACKET1));
  if (Read == READ) {
    Command.CommandCode = READ_DATA_CMD | CMD_MT | CMD_MFM | CMD_SK;
  } else {
    Command.CommandCode = WRITE_DATA_CMD | CMD_MT | CMD_MFM;
  }

  FillPara (FdcDev, Lba, &Command);

  //
  // Write command bytes to FDC
  //
  CommandPointer = (UINT8 *) (&Command);
  for (Index = 0; Index < sizeof (FDD_COMMAND_PACKET1); Index++) {
    if (EFI_ERROR (DataOutByte (FdcDev, CommandPointer++))) {
      return EFI_DEVICE_ERROR;
    }
  }
  //
  // wait for some time
  //
  Times = (STALL_1_SECOND / 50) + 1;
  do {
    if ((FdcReadPort (FdcDev, FDC_REGISTER_MSR) & 0xc0) == 0xc0) {
      break;
    }

    MicroSecondDelay (50);
    Times = Times - 1;
  } while (Times);

  if (Times == 0) {
    return EFI_TIMEOUT;
  }
  //
  // Read result bytes from FDC
  //
  CommandPointer = (UINT8 *) (&Result);
  for (Index = 0; Index < sizeof (FDD_RESULT_PACKET); Index++) {
    if (EFI_ERROR (DataInByte (FdcDev, CommandPointer++))) {
      return EFI_DEVICE_ERROR;
    }
  }
  //
  // Flush before Unmap
  //
  if (Read == READ) {
    Status1 = IsaIo->Flush (IsaIo);
    if (EFI_ERROR (Status1)) {
      return Status1;
    }
  }
  //
  // Unmap Dma
  //
  Status1 = IsaIo->Unmap (IsaIo, Mapping);
  if (EFI_ERROR (Status1)) {
    return Status1;
  }

  return CheckResult (&Result, FdcDev);
}

VOID
FillPara (
  IN  FDC_BLK_IO_DEV       *FdcDev,
  IN  EFI_LBA              Lba,
  IN  FDD_COMMAND_PACKET1  *Command
  )
/*++

  Routine Description: Fill in Parameter
  Parameters:
  Returns:

--*/
// GC_TODO: function comment is missing 'Arguments:'
// GC_TODO:    FdcDev - add argument and description to function comment
// GC_TODO:    Lba - add argument and description to function comment
// GC_TODO:    Command - add argument and description to function comment
{
  UINT8 EndOfTrack;

  //
  // Get EndOfTrack from the Para table
  //
  EndOfTrack = DISK_1440K_EOT;

  //
  // Fill the command parameter
  //
  if (FdcDev->Disk == FDC_DISK0) {
    Command->DiskHeadSel = 0;
  } else {
    Command->DiskHeadSel = 1;
  }

  Command->Cylinder = (UINT8) ((UINTN) Lba / EndOfTrack / 2);
  Command->Head     = (UINT8) ((UINTN) Lba / EndOfTrack % 2);
  Command->Sector   = (UINT8) ((UINT8) ((UINTN) Lba % EndOfTrack) + 1);
  Command->DiskHeadSel = (UINT8) (Command->DiskHeadSel | (Command->Head << 2));
  Command->Number     = DISK_1440K_NUMBER;
  Command->EndOfTrack = DISK_1440K_EOT;
  Command->GapLength  = DISK_1440K_GPL;
  Command->DataLength = DISK_1440K_DTL;
}

EFI_STATUS
DataInByte (
  IN     FDC_BLK_IO_DEV  *FdcDev,
  IN OUT UINT8           *Pointer
  )
/*++

  Routine Description:  Read result byte from Data Register of FDC
  Parameters:
    Pointer UINT8 *: Be used to save result byte read from FDC
  Returns:
    EFI_SUCCESS:    Read result byte from FDC successfully
    EFI_DEVICE_ERROR: The FDC is not ready to be read

--*/
// GC_TODO: function comment is missing 'Arguments:'
// GC_TODO:    FdcDev - add argument and description to function comment
// GC_TODO:    Pointer - add argument and description to function comment
{
  UINT8 data;

  //
  // wait for 1ms and detect the FDC is ready to be read
  //
  if (EFI_ERROR (FddDRQReady (FdcDev, DATA_IN, 1))) {
    return EFI_DEVICE_ERROR;
    //
    // is not ready
    //
  }

  data = FdcReadPort (FdcDev, FDC_REGISTER_DTR);

  //
  // Io delay
  //
  MicroSecondDelay (50);

  *Pointer = data;
  return EFI_SUCCESS;
}

EFI_STATUS
DataOutByte (
  IN FDC_BLK_IO_DEV  *FdcDev,
  IN UINT8           *Pointer
  )
/*++

  Routine Description:  Write command byte to Data Register of FDC
  Parameters:
    Pointer UINT8 *: Be used to save command byte written to FDC
  Returns:
    EFI_SUCCESS:    Write command byte to FDC successfully
    EFI_DEVICE_ERROR: The FDC is not ready to be written

--*/
// GC_TODO: function comment is missing 'Arguments:'
// GC_TODO:    FdcDev - add argument and description to function comment
// GC_TODO:    Pointer - add argument and description to function comment
{
  UINT8 data;

  //
  // wait for 1ms and detect the FDC is ready to be written
  //
  if (EFI_ERROR (FddDRQReady (FdcDev, DATA_OUT, 1))) {
    return EFI_DEVICE_ERROR;
    //
    // is not ready
    //
  }

  data = *Pointer;

  FdcWritePort (FdcDev, FDC_REGISTER_DTR, data);

  //
  // Io delay
  //
  MicroSecondDelay (50);

  return EFI_SUCCESS;
}

EFI_STATUS
FddWaitForBSYClear (
  IN FDC_BLK_IO_DEV  *FdcDev,
  IN UINTN           TimeoutInSeconds
  )
/*++

  Routine Description:  Detect the specified floppy logic drive is busy or
                        not within a period of time
  Parameters:
    Disk EFI_FDC_DISK:    Indicate it is drive A or drive B
    TimeoutInSeconds UINTN: the time period for waiting
  Returns:
    EFI_SUCCESS:  The drive and command are not busy
    EFI_TIMEOUT:  The drive or command is still busy after a period time that
                  set by TimeoutInSeconds

--*/
// GC_TODO: function comment is missing 'Arguments:'
// GC_TODO:    FdcDev - add argument and description to function comment
// GC_TODO:    TimeoutInSeconds - add argument and description to function comment
{
  UINTN Delay;
  UINT8 StatusRegister;
  UINT8 Mask;

  //
  // How to determine drive and command are busy or not: by the bits of
  // Main Status Register
  // bit0: Drive 0 busy (drive A)
  // bit1: Drive 1 busy (drive B)
  // bit4: Command busy
  //
  //
  // set mask: for drive A set bit0 & bit4; for drive B set bit1 & bit4
  //
  Mask  = (UINT8) ((FdcDev->Disk == FDC_DISK0 ? MSR_DAB : MSR_DBB) | MSR_CB);

  Delay = ((TimeoutInSeconds * STALL_1_MSECOND) / 50) + 1;
  do {
    StatusRegister = FdcReadPort (FdcDev, FDC_REGISTER_MSR);
    if ((StatusRegister & Mask) == 0x00) {
      break;
      //
      // not busy
      //
    }

    MicroSecondDelay (50);
    Delay = Delay - 1;
  } while (Delay);

  if (Delay == 0) {
    return EFI_TIMEOUT;
  }

  return EFI_SUCCESS;
}

EFI_STATUS
FddDRQReady (
  IN FDC_BLK_IO_DEV  *FdcDev,
  IN BOOLEAN         Dio,
  IN  UINTN          TimeoutInSeconds
  )
/*++

  Routine Description:  Determine whether FDC is ready to write or read
  Parameters:
    Dio BOOLEAN:      Indicate the FDC is waiting to write or read
    TimeoutInSeconds UINTN: The time period for waiting
  Returns:
    EFI_SUCCESS:  FDC is ready to write or read
    EFI_NOT_READY:  FDC is not ready within the specified time period

--*/
// GC_TODO: function comment is missing 'Arguments:'
// GC_TODO:    FdcDev - add argument and description to function comment
// GC_TODO:    Dio - add argument and description to function comment
// GC_TODO:    TimeoutInSeconds - add argument and description to function comment
{
  UINTN Delay;
  UINT8 StatusRegister;
  UINT8 DataInOut;

  //
  // Before writing to FDC or reading from FDC, the Host must examine
  // the bit7(RQM) and bit6(DIO) of the Main Status Register.
  // That is to say:
  //  command bytes can not be written to Data Register
  //  unless RQM is 1 and DIO is 0
  //  result bytes can not be read from Data Register
  //  unless RQM is 1 and DIO is 1
  //
  DataInOut = (UINT8) (Dio << 6);
  //
  // in order to compare bit6
  //
  Delay = ((TimeoutInSeconds * STALL_1_MSECOND) / 50) + 1;
  do {
    StatusRegister = FdcReadPort (FdcDev, FDC_REGISTER_MSR);
    if ((StatusRegister & MSR_RQM) == MSR_RQM && (StatusRegister & MSR_DIO) == DataInOut) {
      break;
      //
      // FDC is ready
      //
    }

    MicroSecondDelay (50);
    //
    // Stall for 50 us
    //
    Delay = Delay - 1;
  } while (Delay);

  if (Delay == 0) {
    return EFI_NOT_READY;
    //
    // FDC is not ready within the specified time period
    //
  }

  return EFI_SUCCESS;
}

EFI_STATUS
CheckResult (
  IN     FDD_RESULT_PACKET  *Result,
  IN OUT FDC_BLK_IO_DEV     *FdcDev
  )
/*++

Routine Description:

  GC_TODO: Add function description

Arguments:

  Result  - GC_TODO: add argument description
  FdcDev  - GC_TODO: add argument description

Returns:

  EFI_DEVICE_ERROR - GC_TODO: Add description for return value
  EFI_DEVICE_ERROR - GC_TODO: Add description for return value
  EFI_DEVICE_ERROR - GC_TODO: Add description for return value
  EFI_SUCCESS - GC_TODO: Add description for return value

--*/
{
  //
  // Check Status Register0
  //
  if ((Result->Status0 & STS0_IC) != IC_NT) {
    if ((Result->Status0 & STS0_SE) == 0x20) {
      //
      // seek error
      //
      FdcDev->ControllerState->NeedRecalibrate = TRUE;
    }

    FdcDev->ControllerState->NeedRecalibrate = TRUE;
    return EFI_DEVICE_ERROR;
  }
  //
  // Check Status Register1
  //
  if (Result->Status1 & (STS1_EN | STS1_DE | STS1_OR | STS1_ND | STS1_NW | STS1_MA)) {
    FdcDev->ControllerState->NeedRecalibrate = TRUE;
    return EFI_DEVICE_ERROR;
  }
  //
  // Check Status Register2
  //
  if (Result->Status2 & (STS2_CM | STS2_DD | STS2_WC | STS2_BC | STS2_MD)) {
    FdcDev->ControllerState->NeedRecalibrate = TRUE;
    return EFI_DEVICE_ERROR;
  }

  return EFI_SUCCESS;
}

EFI_STATUS
CheckStatus3 (
  IN UINT8 StatusRegister3
  )
/*++

  Routine Description:  Check the drive status information
  Parameters:
    StatusRegister3 UINT8: the value of Status Register 3
  Returns:
    EFI_SUCCESS:
    EFI_WRITE_PROTECTED:  The disk is write protected

--*/
// GC_TODO: function comment is missing 'Arguments:'
// GC_TODO:    StatusRegister3 - add argument and description to function comment
{
  if (StatusRegister3 & STS3_WP) {
    return EFI_WRITE_PROTECTED;
  }

  return EFI_SUCCESS;
}

UINTN
GetTransferBlockCount (
  IN  FDC_BLK_IO_DEV  *FdcDev,
  IN  EFI_LBA         LBA,
  IN  UINTN           NumberOfBlocks
  )
/*++

  Routine Description:  Calculate the number of block in the same cylinder
                        according to LBA
  Parameters:
    FdcDev FDC_BLK_IO_DEV *: A pointer to Data Structure FDC_BLK_IO_DEV
    LBA EFI_LBA:      The starting logic block address
    NumberOfBlocks UINTN: The number of blocks
  Returns:
    UINTN : The number of blocks in the same cylinder which the starting
        logic block address is LBA

--*/
// GC_TODO: function comment is missing 'Arguments:'
// GC_TODO:    FdcDev - add argument and description to function comment
// GC_TODO:    LBA - add argument and description to function comment
// GC_TODO:    NumberOfBlocks - add argument and description to function comment
{
  UINT8 EndOfTrack;
  UINT8 Head;
  UINT8 SectorsInTrack;

  //
  // Calculate the number of block in the same cylinder
  //
  EndOfTrack      = DISK_1440K_EOT;
  Head            = (UINT8) ((UINTN) LBA / EndOfTrack % 2);

  SectorsInTrack  = (UINT8) (EndOfTrack * (2 - Head) - (UINT8) ((UINTN) LBA % EndOfTrack));
  if (SectorsInTrack < NumberOfBlocks) {
    return SectorsInTrack;
  } else {
    return NumberOfBlocks;
  }
}

VOID
EFIAPI
FddTimerProc (
  IN EFI_EVENT  Event,
  IN VOID       *Context
  )
/*++

  Routine Description:  When the Timer(2s) off, turn the drive's motor off
  Parameters:
    Event EFI_EVENT: Event(the timer) whose notification function is being
                     invoked
    Context VOID *:  Pointer to the notification function's context
  Returns:
    VOID

--*/
// GC_TODO: function comment is missing 'Arguments:'
// GC_TODO:    Event - add argument and description to function comment
// GC_TODO:    Context - add argument and description to function comment
{
  FDC_BLK_IO_DEV  *FdcDev;
  UINT8           data;

  FdcDev = (FDC_BLK_IO_DEV *) Context;

  //
  // Get the motor status
  //
  data = FdcReadPort (FdcDev, FDC_REGISTER_DOR);

  if (((FdcDev->Disk == FDC_DISK0) && ((data & 0x10) != 0x10)) ||
      ((FdcDev->Disk == FDC_DISK1) && ((data & 0x21) != 0x21))
      ) {
    return ;
  }
  //
  // the motor is on, so need motor off
  //
  data = 0x0C;
  data = (UINT8) (data | (SELECT_DRV & FdcDev->Disk));
  FdcWritePort (FdcDev, FDC_REGISTER_DOR, data);
  MicroSecondDelay (500);
}

UINT8
FdcReadPort (
  IN FDC_BLK_IO_DEV  *FdcDev,
  IN UINT32          Offset
  )
/*++

  Routine Description: Read I/O port for FDC
  Parameters:
  Returns:

--*/
// GC_TODO: function comment is missing 'Arguments:'
// GC_TODO:    FdcDev - add argument and description to function comment
// GC_TODO:    Offset - add argument and description to function comment
{
  UINT8       Data;

  //
  // Call IsaIo
  //
  FdcDev->IsaIo->Io.Read (
                      FdcDev->IsaIo,
                      EfiIsaIoWidthUint8,
                      FdcDev->BaseAddress + Offset,
                      1,
                      &Data
                      );

  return Data;
}

VOID
FdcWritePort (
  IN FDC_BLK_IO_DEV  *FdcDev,
  IN UINT32          Offset,
  IN UINT8           Data
  )
/*++

  Routine Description: Write I/O port for FDC
  Parameters:
  Returns:

--*/
// GC_TODO: function comment is missing 'Arguments:'
// GC_TODO:    FdcDev - add argument and description to function comment
// GC_TODO:    Offset - add argument and description to function comment
// GC_TODO:    Data - add argument and description to function comment
{

  //
  // Call IsaIo
  //
  FdcDev->IsaIo->Io.Write (
                      FdcDev->IsaIo,
                      EfiIsaIoWidthUint8,
                      FdcDev->BaseAddress + Offset,
                      1,
                      &Data
                      );
}