tyler.durden/audk
1
0
Fork 0
mirror of https://github.com/acidanthera/audk.git synced 2025-11-03 21:17:23 +01:00
Code Issues Packages Projects Releases Wiki Activity
audk/MdeModulePkg/Core/Pei/Image/Image.c
Star Zeng c79351059e 1. Enable use-cases in PEI using SecurityPPI co-equal to the use-cases in DXE using the Security Arch Protocol 
2. Add support to find section by instance rather than only 0 at PEI phase.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>

git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14763 6f19259b-4bc3-4df7-8a09-765794883524
2013-10-11 03:54:13 +00:00

887 lines
31 KiB
C
Raw Blame History

/** @file
Pei Core Load Image Support
Copyright (c) 2006 - 2013, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include "PeiMain.h"
EFI_PEI_LOAD_FILE_PPI mPeiLoadImagePpi = {
PeiLoadImageLoadImageWrapper
};
EFI_PEI_PPI_DESCRIPTOR gPpiLoadFilePpiList = {
(EFI_PEI_PPI_DESCRIPTOR_PPI | EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST),
&gEfiPeiLoadFilePpiGuid,
&mPeiLoadImagePpi
};
/**
Support routine for the PE/COFF Loader that reads a buffer from a PE/COFF file.
The function is used for XIP code to have optimized memory copy.
@param FileHandle - The handle to the PE/COFF file
@param FileOffset - The offset, in bytes, into the file to read
@param ReadSize - The number of bytes to read from the file starting at FileOffset
@param Buffer - A pointer to the buffer to read the data into.
@return EFI_SUCCESS - ReadSize bytes of data were read into Buffer from the PE/COFF file starting at FileOffset
**/
EFI_STATUS
EFIAPI
PeiImageRead (
IN VOID *FileHandle,
IN UINTN FileOffset,
IN UINTN *ReadSize,
OUT VOID *Buffer
)
{
CHAR8 *Destination8;
CHAR8 *Source8;
Destination8 = Buffer;
Source8 = (CHAR8 *) ((UINTN) FileHandle + FileOffset);
if (Destination8 != Source8) {
CopyMem (Destination8, Source8, *ReadSize);
}
return EFI_SUCCESS;
}
/**
Support routine for the PE/COFF Loader that reads a buffer from a PE/COFF file.
The function is implemented as PIC so as to support shadowing.
@param FileHandle - The handle to the PE/COFF file
@param FileOffset - The offset, in bytes, into the file to read
@param ReadSize - The number of bytes to read from the file starting at FileOffset
@param Buffer - A pointer to the buffer to read the data into.
@return EFI_SUCCESS - ReadSize bytes of data were read into Buffer from the PE/COFF file starting at FileOffset
**/
EFI_STATUS
EFIAPI
PeiImageReadForShadow (
IN VOID *FileHandle,
IN UINTN FileOffset,
IN UINTN *ReadSize,
OUT VOID *Buffer
)
{
volatile CHAR8 *Destination8;
CHAR8 *Source8;
UINTN Length;
Destination8 = Buffer;
Source8 = (CHAR8 *) ((UINTN) FileHandle + FileOffset);
if (Destination8 != Source8) {
Length = *ReadSize;
while ((Length--) > 0) {
*(Destination8++) = *(Source8++);
}
}
return EFI_SUCCESS;
}
/**
Support routine to get the Image read file function.
@param ImageContext - The context of the image being loaded
@retval EFI_SUCCESS - If Image function location is found
**/
EFI_STATUS
GetImageReadFunction (
IN PE_COFF_LOADER_IMAGE_CONTEXT *ImageContext
)
{
PEI_CORE_INSTANCE *Private;
VOID* MemoryBuffer;
Private = PEI_CORE_INSTANCE_FROM_PS_THIS (GetPeiServicesTablePointer ());
if (Private->PeiMemoryInstalled && ((Private->HobList.HandoffInformationTable->BootMode != BOOT_ON_S3_RESUME) || PcdGetBool (PcdShadowPeimOnS3Boot)) &&
(EFI_IMAGE_MACHINE_TYPE_SUPPORTED(EFI_IMAGE_MACHINE_X64) || EFI_IMAGE_MACHINE_TYPE_SUPPORTED(EFI_IMAGE_MACHINE_IA32))) {
//
// Shadow algorithm makes lots of non ANSI C assumptions and only works for IA32 and X64
// compilers that have been tested
//
if (Private->ShadowedImageRead == NULL) {
MemoryBuffer = AllocatePages (0x400 / EFI_PAGE_SIZE + 1);
ASSERT (MemoryBuffer != NULL);
CopyMem (MemoryBuffer, (CONST VOID *) (UINTN) PeiImageReadForShadow, 0x400);
Private->ShadowedImageRead = (PE_COFF_LOADER_READ_FILE) (UINTN) MemoryBuffer;
}
ImageContext->ImageRead = Private->ShadowedImageRead;
} else {
ImageContext->ImageRead = PeiImageRead;
}
return EFI_SUCCESS;
}
/**
To check memory usage bit map arry to figure out if the memory range the image will be loaded in is available or not. If
memory range is avaliable, the function will mark the correponding bits to 1 which indicates the memory range is used.
The function is only invoked when load modules at fixed address feature is enabled.
@param Private Pointer to the private data passed in from caller
@param ImageBase The base addres the image will be loaded at.
@param ImageSize The size of the image
@retval EFI_SUCCESS The memory range the image will be loaded in is available
@retval EFI_NOT_FOUND The memory range the image will be loaded in is not available
**/
EFI_STATUS
CheckAndMarkFixLoadingMemoryUsageBitMap (
IN PEI_CORE_INSTANCE *Private,
IN EFI_PHYSICAL_ADDRESS ImageBase,
IN UINT32 ImageSize
)
{
UINT32 DxeCodePageNumber;
UINT64 ReservedCodeSize;
EFI_PHYSICAL_ADDRESS PeiCodeBase;
UINT32 BaseOffsetPageNumber;
UINT32 TopOffsetPageNumber;
UINT32 Index;
UINT64 *MemoryUsageBitMap;
//
// The reserved code range includes RuntimeCodePage range, Boot time code range and PEI code range.
//
DxeCodePageNumber = PcdGet32(PcdLoadFixAddressBootTimeCodePageNumber);
DxeCodePageNumber += PcdGet32(PcdLoadFixAddressRuntimeCodePageNumber);
ReservedCodeSize = EFI_PAGES_TO_SIZE(DxeCodePageNumber + PcdGet32(PcdLoadFixAddressPeiCodePageNumber));
PeiCodeBase = Private->LoadModuleAtFixAddressTopAddress - ReservedCodeSize;
//
// Test the memory range for loading the image in the PEI code range.
//
if ((Private->LoadModuleAtFixAddressTopAddress - EFI_PAGES_TO_SIZE(DxeCodePageNumber)) < (ImageBase + ImageSize) ||
(PeiCodeBase > ImageBase)) {
return EFI_NOT_FOUND;
}
//
// Test if the memory is avalaible or not.
//
MemoryUsageBitMap = Private->PeiCodeMemoryRangeUsageBitMap;
BaseOffsetPageNumber = EFI_SIZE_TO_PAGES((UINT32)(ImageBase - PeiCodeBase));
TopOffsetPageNumber = EFI_SIZE_TO_PAGES((UINT32)(ImageBase + ImageSize - PeiCodeBase));
for (Index = BaseOffsetPageNumber; Index < TopOffsetPageNumber; Index ++) {
if ((MemoryUsageBitMap[Index / 64] & LShiftU64(1, (Index % 64))) != 0) {
//
// This page is already used.
//
return EFI_NOT_FOUND;
}
}
//
// Being here means the memory range is available. So mark the bits for the memory range
//
for (Index = BaseOffsetPageNumber; Index < TopOffsetPageNumber; Index ++) {
MemoryUsageBitMap[Index / 64] |= LShiftU64(1, (Index % 64));
}
return EFI_SUCCESS;
}
/**
Get the fixed loadding address from image header assigned by build tool. This function only be called
when Loading module at Fixed address feature enabled.
@param ImageContext Pointer to the image context structure that describes the PE/COFF
image that needs to be examined by this function.
@param Private Pointer to the private data passed in from caller
@retval EFI_SUCCESS An fixed loading address is assigned to this image by build tools .
@retval EFI_NOT_FOUND The image has no assigned fixed loadding address.
**/
EFI_STATUS
GetPeCoffImageFixLoadingAssignedAddress(
IN OUT PE_COFF_LOADER_IMAGE_CONTEXT *ImageContext,
IN PEI_CORE_INSTANCE *Private
)
{
UINTN SectionHeaderOffset;
EFI_STATUS Status;
EFI_IMAGE_SECTION_HEADER SectionHeader;
EFI_IMAGE_OPTIONAL_HEADER_UNION *ImgHdr;
EFI_PHYSICAL_ADDRESS FixLoaddingAddress;
UINT16 Index;
UINTN Size;
UINT16 NumberOfSections;
UINT64 ValueInSectionHeader;
FixLoaddingAddress = 0;
Status = EFI_NOT_FOUND;
//
// Get PeHeader pointer
//
ImgHdr = (EFI_IMAGE_OPTIONAL_HEADER_UNION *)((CHAR8* )ImageContext->Handle + ImageContext->PeCoffHeaderOffset);
if (ImageContext->IsTeImage) {
//
// for TE image, the fix loadding address is saved in first section header that doesn't point
// to code section.
//
SectionHeaderOffset = sizeof (EFI_TE_IMAGE_HEADER);
NumberOfSections = ImgHdr->Te.NumberOfSections;
} else {
SectionHeaderOffset = (UINTN)(
ImageContext->PeCoffHeaderOffset +
sizeof (UINT32) +
sizeof (EFI_IMAGE_FILE_HEADER) +
ImgHdr->Pe32.FileHeader.SizeOfOptionalHeader
);
NumberOfSections = ImgHdr->Pe32.FileHeader.NumberOfSections;
}
//
// Get base address from the first section header that doesn't point to code section.
//
for (Index = 0; Index < NumberOfSections; Index++) {
//
// Read section header from file
//
Size = sizeof (EFI_IMAGE_SECTION_HEADER);
Status = ImageContext->ImageRead (
ImageContext->Handle,
SectionHeaderOffset,
&Size,
&SectionHeader
);
if (EFI_ERROR (Status)) {
return Status;
}
Status = EFI_NOT_FOUND;
if ((SectionHeader.Characteristics & EFI_IMAGE_SCN_CNT_CODE) == 0) {
//
// Build tool will save the address in PointerToRelocations & PointerToLineNumbers fields in the first section header
// that doesn't point to code section in image header, as well as ImageBase field of image header. A notable thing is
// that for PEIM, the value in ImageBase field may not be equal to the value in PointerToRelocations & PointerToLineNumbers because
// for XIP PEIM, ImageBase field holds the image base address running on the Flash. And PointerToRelocations & PointerToLineNumbers
// hold the image base address when it is shadow to the memory. And there is an assumption that when the feature is enabled, if a
// module is assigned a loading address by tools, PointerToRelocations & PointerToLineNumbers fields should NOT be Zero, or
// else, these 2 fileds should be set to Zero
//
ValueInSectionHeader = ReadUnaligned64((UINT64*)&SectionHeader.PointerToRelocations);
if (ValueInSectionHeader != 0) {
//
// Found first section header that doesn't point to code section.
//
if ((INT64)PcdGet64(PcdLoadModuleAtFixAddressEnable) > 0) {
//
// When LMFA feature is configured as Load Module at Fixed Absolute Address mode, PointerToRelocations & PointerToLineNumbers field
// hold the absolute address of image base runing in memory
//
FixLoaddingAddress = ValueInSectionHeader;
} else {
//
// When LMFA feature is configured as Load Module at Fixed offset mode, PointerToRelocations & PointerToLineNumbers field
// hold the offset relative to a platform-specific top address.
//
FixLoaddingAddress = (EFI_PHYSICAL_ADDRESS)(Private->LoadModuleAtFixAddressTopAddress + (INT64)ValueInSectionHeader);
}
//
// Check if the memory range is avaliable.
//
Status = CheckAndMarkFixLoadingMemoryUsageBitMap (Private, FixLoaddingAddress, (UINT32) ImageContext->ImageSize);
if (!EFI_ERROR(Status)) {
//
// The assigned address is valid. Return the specified loadding address
//
ImageContext->ImageAddress = FixLoaddingAddress;
}
}
break;
}
SectionHeaderOffset += sizeof (EFI_IMAGE_SECTION_HEADER);
}
DEBUG ((EFI_D_INFO|EFI_D_LOAD, "LOADING MODULE FIXED INFO: Loading module at fixed address 0x%11p. Status= %r \n", (VOID *)(UINTN)FixLoaddingAddress, Status));
return Status;
}
/**
Loads and relocates a PE/COFF image into memory.
If the image is not relocatable, it will not be loaded into memory and be loaded as XIP image.
@param Pe32Data - The base address of the PE/COFF file that is to be loaded and relocated
@param ImageAddress - The base address of the relocated PE/COFF image
@param ImageSize - The size of the relocated PE/COFF image
@param EntryPoint - The entry point of the relocated PE/COFF image
@retval EFI_SUCCESS The file was loaded and relocated
@retval EFI_OUT_OF_RESOURCES There was not enough memory to load and relocate the PE/COFF file
@retval EFI_WARN_BUFFER_TOO_SMALL
There is not enough heap to allocate the requested size.
This will not prevent the XIP image from being invoked.
**/
EFI_STATUS
LoadAndRelocatePeCoffImage (
IN VOID *Pe32Data,
OUT EFI_PHYSICAL_ADDRESS *ImageAddress,
OUT UINT64 *ImageSize,
OUT EFI_PHYSICAL_ADDRESS *EntryPoint
)
{
EFI_STATUS Status;
PE_COFF_LOADER_IMAGE_CONTEXT ImageContext;
PEI_CORE_INSTANCE *Private;
UINT64 AlignImageSize;
BOOLEAN IsXipImage;
EFI_STATUS ReturnStatus;
Private = PEI_CORE_INSTANCE_FROM_PS_THIS (GetPeiServicesTablePointer ());
ReturnStatus = EFI_SUCCESS;
IsXipImage = FALSE;
ZeroMem (&ImageContext, sizeof (ImageContext));
ImageContext.Handle = Pe32Data;
Status = GetImageReadFunction (&ImageContext);
ASSERT_EFI_ERROR (Status);
Status = PeCoffLoaderGetImageInfo (&ImageContext);
if (EFI_ERROR (Status)) {
return Status;
}
//
// XIP image that ImageAddress is same to Image handle.
//
if (ImageContext.ImageAddress == (EFI_PHYSICAL_ADDRESS)(UINTN) Pe32Data) {
IsXipImage = TRUE;
}
//
// When Image has no reloc section, it can't be relocated into memory.
//
if (ImageContext.RelocationsStripped && (Private->PeiMemoryInstalled) && (Private->HobList.HandoffInformationTable->BootMode != BOOT_ON_S3_RESUME || PcdGetBool (PcdShadowPeimOnS3Boot))) {
DEBUG ((EFI_D_INFO|EFI_D_LOAD, "The image at 0x%08x without reloc section can't be loaded into memory\n", (UINTN) Pe32Data));
}
//
// Set default base address to current image address.
//
ImageContext.ImageAddress = (EFI_PHYSICAL_ADDRESS)(UINTN) Pe32Data;
//
// Allocate Memory for the image when memory is ready, boot mode is not S3, and image is relocatable.
//
if ((!ImageContext.RelocationsStripped) && (Private->PeiMemoryInstalled) && (Private->HobList.HandoffInformationTable->BootMode != BOOT_ON_S3_RESUME || PcdGetBool (PcdShadowPeimOnS3Boot))) {
//
// Allocate more buffer to avoid buffer overflow.
//
if (ImageContext.IsTeImage) {
AlignImageSize = ImageContext.ImageSize + ((EFI_TE_IMAGE_HEADER *) Pe32Data)->StrippedSize - sizeof (EFI_TE_IMAGE_HEADER);
} else {
AlignImageSize = ImageContext.ImageSize;
}
if (ImageContext.SectionAlignment > EFI_PAGE_SIZE) {
AlignImageSize += ImageContext.SectionAlignment;
}
if (PcdGet64(PcdLoadModuleAtFixAddressEnable) != 0 && (Private->HobList.HandoffInformationTable->BootMode != BOOT_ON_S3_RESUME)) {
Status = GetPeCoffImageFixLoadingAssignedAddress(&ImageContext, Private);
if (EFI_ERROR (Status)){
DEBUG ((EFI_D_INFO|EFI_D_LOAD, "LOADING MODULE FIXED ERROR: Failed to load module at fixed address. \n"));
//
// The PEIM is not assiged valid address, try to allocate page to load it.
//
ImageContext.ImageAddress = (EFI_PHYSICAL_ADDRESS)(UINTN) AllocatePages (EFI_SIZE_TO_PAGES ((UINT32) AlignImageSize));
}
} else {
ImageContext.ImageAddress = (EFI_PHYSICAL_ADDRESS)(UINTN) AllocatePages (EFI_SIZE_TO_PAGES ((UINT32) AlignImageSize));
}
if (ImageContext.ImageAddress != 0) {
//
// Adjust the Image Address to make sure it is section alignment.
//
if (ImageContext.SectionAlignment > EFI_PAGE_SIZE) {
ImageContext.ImageAddress =
(ImageContext.ImageAddress + ImageContext.SectionAlignment - 1) &
~((UINTN)ImageContext.SectionAlignment - 1);
}
//
// Fix alignment requirement when Load IPF TeImage into memory.
// Skip the reserved space for the stripped PeHeader when load TeImage into memory.
//
if (ImageContext.IsTeImage) {
ImageContext.ImageAddress = ImageContext.ImageAddress +
((EFI_TE_IMAGE_HEADER *) Pe32Data)->StrippedSize -
sizeof (EFI_TE_IMAGE_HEADER);
}
} else {
//
// No enough memory resource.
//
if (IsXipImage) {
//
// XIP image can still be invoked.
//
ImageContext.ImageAddress = (EFI_PHYSICAL_ADDRESS)(UINTN) Pe32Data;
ReturnStatus = EFI_WARN_BUFFER_TOO_SMALL;
} else {
//
// Non XIP image can't be loaded because no enough memory is allocated.
//
ASSERT (FALSE);
return EFI_OUT_OF_RESOURCES;
}
}
}
//
// Load the image to our new buffer
//
Status = PeCoffLoaderLoadImage (&ImageContext);
if (EFI_ERROR (Status)) {
return Status;
}
//
// Relocate the image in our new buffer
//
Status = PeCoffLoaderRelocateImage (&ImageContext);
if (EFI_ERROR (Status)) {
return Status;
}
//
// Flush the instruction cache so the image data is written before we execute it
//
if (ImageContext.ImageAddress != (EFI_PHYSICAL_ADDRESS)(UINTN) Pe32Data) {
InvalidateInstructionCacheRange ((VOID *)(UINTN)ImageContext.ImageAddress, (UINTN)ImageContext.ImageSize);
}
*ImageAddress = ImageContext.ImageAddress;
*ImageSize = ImageContext.ImageSize;
*EntryPoint = ImageContext.EntryPoint;
return ReturnStatus;
}
/**
Loads a PEIM into memory for subsequent execution. If there are compressed
images or images that need to be relocated into memory for performance reasons,
this service performs that transformation.
@param PeiServices An indirect pointer to the EFI_PEI_SERVICES table published by the PEI Foundation
@param FileHandle Pointer to the FFS file header of the image.
@param ImageAddressArg Pointer to PE/TE image.
@param ImageSizeArg Size of PE/TE image.
@param EntryPoint Pointer to entry point of specified image file for output.
@param AuthenticationState - Pointer to attestation authentication state of image.
@retval EFI_SUCCESS Image is successfully loaded.
@retval EFI_NOT_FOUND Fail to locate necessary PPI.
@retval EFI_UNSUPPORTED Image Machine Type is not supported.
@retval EFI_WARN_BUFFER_TOO_SMALL
There is not enough heap to allocate the requested size.
This will not prevent the XIP image from being invoked.
**/
EFI_STATUS
PeiLoadImageLoadImage (
IN CONST EFI_PEI_SERVICES **PeiServices,
IN EFI_PEI_FILE_HANDLE FileHandle,
OUT EFI_PHYSICAL_ADDRESS *ImageAddressArg, OPTIONAL
OUT UINT64 *ImageSizeArg, OPTIONAL
OUT EFI_PHYSICAL_ADDRESS *EntryPoint,
OUT UINT32 *AuthenticationState
)
{
EFI_STATUS Status;
VOID *Pe32Data;
EFI_PHYSICAL_ADDRESS ImageAddress;
UINT64 ImageSize;
EFI_PHYSICAL_ADDRESS ImageEntryPoint;
UINT16 Machine;
EFI_SECTION_TYPE SearchType1;
EFI_SECTION_TYPE SearchType2;
*EntryPoint = 0;
ImageSize = 0;
*AuthenticationState = 0;
if (FeaturePcdGet (PcdPeiCoreImageLoaderSearchTeSectionFirst)) {
SearchType1 = EFI_SECTION_TE;
SearchType2 = EFI_SECTION_PE32;
} else {
SearchType1 = EFI_SECTION_PE32;
SearchType2 = EFI_SECTION_TE;
}
//
// Try to find a first exe section (if PcdPeiCoreImageLoaderSearchTeSectionFirst
// is true, TE will be searched first).
//
Status = PeiServicesFfsFindSectionData3 (
SearchType1,
0,
FileHandle,
&Pe32Data,
AuthenticationState
);
//
// If we didn't find a first exe section, try to find the second exe section.
//
if (EFI_ERROR (Status)) {
Status = PeiServicesFfsFindSectionData3 (
SearchType2,
0,
FileHandle,
&Pe32Data,
AuthenticationState
);
if (EFI_ERROR (Status)) {
//
// PEI core only carry the loader function for TE and PE32 executables
// If this two section does not exist, just return.
//
return Status;
}
}
//
// If memory is installed, perform the shadow operations
//
Status = LoadAndRelocatePeCoffImage (
Pe32Data,
&ImageAddress,
&ImageSize,
&ImageEntryPoint
);
ASSERT_EFI_ERROR (Status);
if (EFI_ERROR (Status)) {
return Status;
}
//
// Got the entry point from the loaded Pe32Data
//
Pe32Data = (VOID *) ((UINTN) ImageAddress);
*EntryPoint = ImageEntryPoint;
Machine = PeCoffLoaderGetMachineType (Pe32Data);
if (!EFI_IMAGE_MACHINE_TYPE_SUPPORTED (Machine)) {
if (!EFI_IMAGE_MACHINE_CROSS_TYPE_SUPPORTED (Machine)) {
return EFI_UNSUPPORTED;
}
}
if (ImageAddressArg != NULL) {
*ImageAddressArg = ImageAddress;
}
if (ImageSizeArg != NULL) {
*ImageSizeArg = ImageSize;
}
DEBUG_CODE_BEGIN ();
CHAR8 *AsciiString;
CHAR8 EfiFileName[512];
INT32 Index;
INT32 StartIndex;
//
// Print debug message: Loading PEIM at 0x12345678 EntryPoint=0x12345688 Driver.efi
//
if (Machine != EFI_IMAGE_MACHINE_IA64) {
DEBUG ((EFI_D_INFO | EFI_D_LOAD, "Loading PEIM at 0x%11p EntryPoint=0x%11p ", (VOID *)(UINTN)ImageAddress, (VOID *)(UINTN)*EntryPoint));
} else {
//
// For IPF Image, the real entry point should be print.
//
DEBUG ((EFI_D_INFO | EFI_D_LOAD, "Loading PEIM at 0x%11p EntryPoint=0x%11p ", (VOID *)(UINTN)ImageAddress, (VOID *)(UINTN)(*(UINT64 *)(UINTN)*EntryPoint)));
}
//
// Print Module Name by PeImage PDB file name.
//
AsciiString = PeCoffLoaderGetPdbPointer (Pe32Data);
if (AsciiString != NULL) {
StartIndex = 0;
for (Index = 0; AsciiString[Index] != 0; Index++) {
if (AsciiString[Index] == '\\' || AsciiString[Index] == '/') {
StartIndex = Index + 1;
}
}
//
// Copy the PDB file name to our temporary string, and replace .pdb with .efi
// The PDB file name is limited in the range of 0~511.
// If the length is bigger than 511, trim the redudant characters to avoid overflow in array boundary.
//
for (Index = 0; Index < sizeof (EfiFileName) - 4; Index++) {
EfiFileName[Index] = AsciiString[Index + StartIndex];
if (EfiFileName[Index] == 0) {
EfiFileName[Index] = '.';
}
if (EfiFileName[Index] == '.') {
EfiFileName[Index + 1] = 'e';
EfiFileName[Index + 2] = 'f';
EfiFileName[Index + 3] = 'i';
EfiFileName[Index + 4] = 0;
break;
}
}
if (Index == sizeof (EfiFileName) - 4) {
EfiFileName[Index] = 0;
}
DEBUG ((EFI_D_INFO | EFI_D_LOAD, "%a", EfiFileName));
}
DEBUG_CODE_END ();
DEBUG ((EFI_D_INFO | EFI_D_LOAD, "\n"));
return EFI_SUCCESS;
}
/**
The wrapper function of PeiLoadImageLoadImage().
@param This - Pointer to EFI_PEI_LOAD_FILE_PPI.
@param FileHandle - Pointer to the FFS file header of the image.
@param ImageAddressArg - Pointer to PE/TE image.
@param ImageSizeArg - Size of PE/TE image.
@param EntryPoint - Pointer to entry point of specified image file for output.
@param AuthenticationState - Pointer to attestation authentication state of image.
@return Status of PeiLoadImageLoadImage().
**/
EFI_STATUS
EFIAPI
PeiLoadImageLoadImageWrapper (
IN CONST EFI_PEI_LOAD_FILE_PPI *This,
IN EFI_PEI_FILE_HANDLE FileHandle,
OUT EFI_PHYSICAL_ADDRESS *ImageAddressArg, OPTIONAL
OUT UINT64 *ImageSizeArg, OPTIONAL
OUT EFI_PHYSICAL_ADDRESS *EntryPoint,
OUT UINT32 *AuthenticationState
)
{
return PeiLoadImageLoadImage (
GetPeiServicesTablePointer (),
FileHandle,
ImageAddressArg,
ImageSizeArg,
EntryPoint,
AuthenticationState
);
}
/**
Check whether the input image has the relocation.
@param Pe32Data Pointer to the PE/COFF or TE image.
@retval TRUE Relocation is stripped.
@retval FALSE Relocation is not stripped.
**/
BOOLEAN
RelocationIsStrip (
IN VOID *Pe32Data
)
{
EFI_IMAGE_OPTIONAL_HEADER_PTR_UNION Hdr;
EFI_IMAGE_DOS_HEADER *DosHdr;
ASSERT (Pe32Data != NULL);
DosHdr = (EFI_IMAGE_DOS_HEADER *)Pe32Data;
if (DosHdr->e_magic == EFI_IMAGE_DOS_SIGNATURE) {
//
// DOS image header is present, so read the PE header after the DOS image header.
//
Hdr.Pe32 = (EFI_IMAGE_NT_HEADERS32 *)((UINTN) Pe32Data + (UINTN) ((DosHdr->e_lfanew) & 0x0ffff));
} else {
//
// DOS image header is not present, so PE header is at the image base.
//
Hdr.Pe32 = (EFI_IMAGE_NT_HEADERS32 *)Pe32Data;
}
//
// Three cases with regards to relocations:
// - Image has base relocs, RELOCS_STRIPPED==0 => image is relocatable
// - Image has no base relocs, RELOCS_STRIPPED==1 => Image is not relocatable
// - Image has no base relocs, RELOCS_STRIPPED==0 => Image is relocatable but
// has no base relocs to apply
// Obviously having base relocations with RELOCS_STRIPPED==1 is invalid.
//
// Look at the file header to determine if relocations have been stripped, and
// save this info in the image context for later use.
//
if (Hdr.Te->Signature == EFI_TE_IMAGE_HEADER_SIGNATURE) {
if ((Hdr.Te->DataDirectory[0].Size == 0) && (Hdr.Te->DataDirectory[0].VirtualAddress == 0)) {
return TRUE;
} else {
return FALSE;
}
} else if (Hdr.Pe32->Signature == EFI_IMAGE_NT_SIGNATURE) {
if ((Hdr.Pe32->FileHeader.Characteristics & EFI_IMAGE_FILE_RELOCS_STRIPPED) != 0) {
return TRUE;
} else {
return FALSE;
}
}
return FALSE;
}
/**
Routine to load image file for subsequent execution by LoadFile Ppi.
If any LoadFile Ppi is not found, the build-in support function for the PE32+/TE
XIP image format is used.
@param PeiServices - An indirect pointer to the EFI_PEI_SERVICES table published by the PEI Foundation
@param FileHandle - Pointer to the FFS file header of the image.
@param PeimState - The dispatch state of the input PEIM handle.
@param EntryPoint - Pointer to entry point of specified image file for output.
@param AuthenticationState - Pointer to attestation authentication state of image.
@retval EFI_SUCCESS - Image is successfully loaded.
@retval EFI_NOT_FOUND - Fail to locate necessary PPI
@retval Others - Fail to load file.
**/
EFI_STATUS
PeiLoadImage (
IN CONST EFI_PEI_SERVICES **PeiServices,
IN EFI_PEI_FILE_HANDLE FileHandle,
IN UINT8 PeimState,
OUT EFI_PHYSICAL_ADDRESS *EntryPoint,
OUT UINT32 *AuthenticationState
)
{
EFI_STATUS PpiStatus;
EFI_STATUS Status;
UINTN Index;
EFI_PEI_LOAD_FILE_PPI *LoadFile;
EFI_PHYSICAL_ADDRESS ImageAddress;
UINT64 ImageSize;
BOOLEAN IsStrip;
IsStrip = FALSE;
//
// If any instances of PEI_LOAD_FILE_PPI are installed, they are called.
// one at a time, until one reports EFI_SUCCESS.
//
Index = 0;
do {
PpiStatus = PeiServicesLocatePpi (
&gEfiPeiLoadFilePpiGuid,
Index,
NULL,
(VOID **)&LoadFile
);
if (!EFI_ERROR (PpiStatus)) {
Status = LoadFile->LoadFile (
LoadFile,
FileHandle,
&ImageAddress,
&ImageSize,
EntryPoint,
AuthenticationState
);
if (!EFI_ERROR (Status) || Status == EFI_WARN_BUFFER_TOO_SMALL) {
//
// The shadowed PEIM must be relocatable.
//
if (PeimState == PEIM_STATE_REGISITER_FOR_SHADOW) {
IsStrip = RelocationIsStrip ((VOID *) (UINTN) ImageAddress);
ASSERT (!IsStrip);
if (IsStrip) {
return EFI_UNSUPPORTED;
}
}
//
// The image to be started must have the machine type supported by PeiCore.
//
ASSERT (EFI_IMAGE_MACHINE_TYPE_SUPPORTED (PeCoffLoaderGetMachineType ((VOID *) (UINTN) ImageAddress)));
if (!EFI_IMAGE_MACHINE_TYPE_SUPPORTED (PeCoffLoaderGetMachineType ((VOID *) (UINTN) ImageAddress))) {
return EFI_UNSUPPORTED;
}
return EFI_SUCCESS;
}
}
Index++;
} while (!EFI_ERROR (PpiStatus));
return PpiStatus;
}
/**
Install Pei Load File PPI.
@param PrivateData - Pointer to PEI_CORE_INSTANCE.
@param OldCoreData - Pointer to PEI_CORE_INSTANCE.
**/
VOID
InitializeImageServices (
IN PEI_CORE_INSTANCE *PrivateData,
IN PEI_CORE_INSTANCE *OldCoreData
)
{
if (OldCoreData == NULL) {
//
// The first time we are XIP (running from FLASH). We need to remember the
// FLASH address so we can reinstall the memory version that runs faster
//
PrivateData->XipLoadFile = &gPpiLoadFilePpiList;
PeiServicesInstallPpi (PrivateData->XipLoadFile);
} else {
//
// 2nd time we are running from memory so replace the XIP version with the
// new memory version.
//
PeiServicesReInstallPpi (PrivateData->XipLoadFile, &gPpiLoadFilePpiList);
}
}
Reference in New Issue View Git Blame Copy Permalink