audk/MdeModulePkg/Universal/Network/MnpDxe/MnpImpl.h

856 lines
33 KiB
C

/** @file
Declaration of structures and functions of MnpDxe driver.
Copyright (c) 2005 - 2010, Intel Corporation.<BR>
All rights reserved. This program and the accompanying materials
are licensed and made available under the terms and conditions
of the BSD License which accompanies this distribution. The full
text of the license may be found at<BR>
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#ifndef _MNP_IMPL_H_
#define _MNP_IMPL_H_
#include "MnpDriver.h"
#define NET_ETHER_FCS_SIZE 4
#define MNP_SYS_POLL_INTERVAL (10 * TICKS_PER_MS) // 10 milliseconds
#define MNP_TIMEOUT_CHECK_INTERVAL (50 * TICKS_PER_MS) // 50 milliseconds
#define MNP_MEDIA_DETECT_INTERVAL (500 * TICKS_PER_MS) // 500 milliseconds
#define MNP_TX_TIMEOUT_TIME (500 * TICKS_PER_MS) // 500 milliseconds
#define MNP_INIT_NET_BUFFER_NUM 512
#define MNP_NET_BUFFER_INCREASEMENT 64
#define MNP_MAX_NET_BUFFER_NUM 65536
#define MNP_MAX_RCVD_PACKET_QUE_SIZE 256
#define MNP_RECEIVE_UNICAST 0x01
#define MNP_RECEIVE_BROADCAST 0x02
#define UNICAST_PACKET MNP_RECEIVE_UNICAST
#define BROADCAST_PACKET MNP_RECEIVE_BROADCAST
#define MNP_INSTANCE_DATA_SIGNATURE SIGNATURE_32 ('M', 'n', 'p', 'I')
#define MNP_INSTANCE_DATA_FROM_THIS(a) \
CR ( \
(a), \
MNP_INSTANCE_DATA, \
ManagedNetwork, \
MNP_INSTANCE_DATA_SIGNATURE \
)
typedef struct {
UINT32 Signature;
MNP_SERVICE_DATA *MnpServiceData;
EFI_HANDLE Handle;
LIST_ENTRY InstEntry;
EFI_MANAGED_NETWORK_PROTOCOL ManagedNetwork;
BOOLEAN Configured;
BOOLEAN Destroyed;
LIST_ENTRY GroupCtrlBlkList;
NET_MAP RxTokenMap;
LIST_ENTRY RxDeliveredPacketQueue;
LIST_ENTRY RcvdPacketQueue;
UINTN RcvdPacketQueueSize;
EFI_MANAGED_NETWORK_CONFIG_DATA ConfigData;
UINT8 ReceiveFilter;
} MNP_INSTANCE_DATA;
typedef struct {
LIST_ENTRY AddrEntry;
EFI_MAC_ADDRESS Address;
INTN RefCnt;
} MNP_GROUP_ADDRESS;
typedef struct {
LIST_ENTRY CtrlBlkEntry;
MNP_GROUP_ADDRESS *GroupAddress;
} MNP_GROUP_CONTROL_BLOCK;
typedef struct {
LIST_ENTRY WrapEntry;
MNP_INSTANCE_DATA *Instance;
EFI_MANAGED_NETWORK_RECEIVE_DATA RxData;
NET_BUF *Nbuf;
UINT64 TimeoutTick;
} MNP_RXDATA_WRAP;
/**
Initialize the mnp device context data.
@param[in, out] MnpDeviceData Pointer to the mnp device context data.
@param[in] ImageHandle The driver image handle.
@param[in] ControllerHandle Handle of device to bind driver to.
@retval EFI_SUCCESS The mnp service context is initialized.
@retval EFI_UNSUPPORTED ControllerHandle does not support Simple Network Protocol.
@retval Others Other errors as indicated.
**/
EFI_STATUS
MnpInitializeDeviceData (
IN OUT MNP_DEVICE_DATA *MnpDeviceData,
IN EFI_HANDLE ImageHandle,
IN EFI_HANDLE ControllerHandle
);
/**
Destroy the MNP device context data.
@param[in, out] MnpDeviceData Pointer to the mnp device context data.
@param[in] ImageHandle The driver image handle.
**/
VOID
MnpDestroyDeviceData (
IN OUT MNP_DEVICE_DATA *MnpDeviceData,
IN EFI_HANDLE ImageHandle
);
/**
Create mnp service context data.
@param[in] MnpDeviceData Pointer to the mnp device context data.
@param[in] VlanId The VLAN ID.
@param[in] Priority The VLAN priority. If VlanId is 0,
Priority is ignored.
@return A pointer to MNP_SERVICE_DATA or NULL if failed to create MNP service context.
**/
MNP_SERVICE_DATA *
MnpCreateServiceData (
IN MNP_DEVICE_DATA *MnpDeviceData,
IN UINT16 VlanId,
IN UINT8 Priority OPTIONAL
);
/**
Initialize the mnp service context data.
@param[in, out] MnpServiceData Pointer to the mnp service context data.
@param[in] ImageHandle The driver image handle.
@param[in] ControllerHandle Handle of device to bind driver to.
@retval EFI_SUCCESS The mnp service context is initialized.
@retval EFI_UNSUPPORTED ControllerHandle does not support Simple Network Protocol.
@retval Others Other errors as indicated.
**/
EFI_STATUS
MnpInitializeServiceData (
IN OUT MNP_SERVICE_DATA *MnpServiceData,
IN EFI_HANDLE ImageHandle,
IN EFI_HANDLE ControllerHandle
);
/**
Destroy the MNP service context data.
@param[in, out] MnpServiceData Pointer to the mnp service context data.
@retval EFI_SUCCESS The mnp service context is destroyed.
@retval Others Errors as indicated.
**/
EFI_STATUS
MnpDestroyServiceData (
IN OUT MNP_SERVICE_DATA *MnpServiceData
);
/**
Destroy all child of the MNP service data.
@param[in, out] MnpServiceData Pointer to the mnp service context data.
@retval EFI_SUCCESS All child are destroyed.
@retval Others Failed to destroy all child.
**/
EFI_STATUS
MnpDestroyServiceChild (
IN OUT MNP_SERVICE_DATA *MnpServiceData
);
/**
Find the MNP Service Data for given VLAN ID.
@param[in] MnpDeviceData Pointer to the mnp device context data.
@param[in] VlanId The VLAN ID.
@return A pointer to MNP_SERVICE_DATA or NULL if not found.
**/
MNP_SERVICE_DATA *
MnpFindServiceData (
IN MNP_DEVICE_DATA *MnpDeviceData,
IN UINT16 VlanId
);
/**
Initialize the mnp instance context data.
@param[in] MnpServiceData Pointer to the mnp service context data.
@param[in, out] Instance Pointer to the mnp instance context data
to initialize.
**/
VOID
MnpInitializeInstanceData (
IN MNP_SERVICE_DATA *MnpServiceData,
IN OUT MNP_INSTANCE_DATA *Instance
);
/**
Check whether the token specified by Arg matches the token in Item.
@param[in] Map Pointer to the NET_MAP.
@param[in] Item Pointer to the NET_MAP_ITEM.
@param[in] Arg Pointer to the Arg, it's a pointer to the token to
check.
@retval EFI_SUCCESS The token specified by Arg is different from the
token in Item.
@retval EFI_ACCESS_DENIED The token specified by Arg is the same as that in
Item.
**/
EFI_STATUS
MnpTokenExist (
IN NET_MAP *Map,
IN NET_MAP_ITEM *Item,
IN VOID *Arg
);
/**
Cancel the token specified by Arg if it matches the token in Item.
@param[in, out] Map Pointer to the NET_MAP.
@param[in, out] Item Pointer to the NET_MAP_ITEM.
@param[in] Arg Pointer to the Arg, it's a pointer to the
token to cancel.
@retval EFI_SUCCESS The Arg is NULL, and the token in Item is cancelled,
or the Arg isn't NULL, and the token in Item is
different from the Arg.
@retval EFI_ABORTED The Arg isn't NULL, the token in Item mathces the
Arg, and the token is cancelled.
**/
EFI_STATUS
MnpCancelTokens (
IN OUT NET_MAP *Map,
IN OUT NET_MAP_ITEM *Item,
IN VOID *Arg
);
/**
Flush the instance's received data.
@param[in, out] Instance Pointer to the mnp instance context data.
**/
VOID
MnpFlushRcvdDataQueue (
IN OUT MNP_INSTANCE_DATA *Instance
);
/**
Configure the Instance using ConfigData.
@param[in, out] Instance Pointer to the mnp instance context data.
@param[in] ConfigData Pointer to the configuration data used to configure
the isntance.
@retval EFI_SUCCESS The Instance is configured.
@retval EFI_UNSUPPORTED EnableReceiveTimestamps is on and the
implementation doesn't support it.
@retval Others Other errors as indicated.
**/
EFI_STATUS
MnpConfigureInstance (
IN OUT MNP_INSTANCE_DATA *Instance,
IN EFI_MANAGED_NETWORK_CONFIG_DATA *ConfigData OPTIONAL
);
/**
Do the group operations for this instance.
@param[in, out] Instance Pointer to the instance context data.
@param[in] JoinFlag Set to TRUE to join a group. Set to TRUE to
leave a group/groups.
@param[in] MacAddress Pointer to the group address to join or leave.
@param[in] CtrlBlk Pointer to the group control block if JoinFlag
is FALSE.
@retval EFI_SUCCESS The group operation finished.
@retval EFI_OUT_OF_RESOURCES Failed due to lack of memory resources.
@retval Others Other errors as indicated.
**/
EFI_STATUS
MnpGroupOp (
IN OUT MNP_INSTANCE_DATA *Instance,
IN BOOLEAN JoinFlag,
IN EFI_MAC_ADDRESS *MacAddress OPTIONAL,
IN MNP_GROUP_CONTROL_BLOCK *CtrlBlk OPTIONAL
);
/**
Validates the Mnp transmit token.
@param[in] Instance Pointer to the Mnp instance context data.
@param[in] Token Pointer to the transmit token to check.
@return The Token is valid or not.
**/
BOOLEAN
MnpIsValidTxToken (
IN MNP_INSTANCE_DATA *Instance,
IN EFI_MANAGED_NETWORK_COMPLETION_TOKEN *Token
);
/**
Build the packet to transmit from the TxData passed in.
@param[in] MnpServiceData Pointer to the mnp service context data.
@param[in] TxData Pointer to the transmit data containing the information
to build the packet.
@param[out] PktBuf Pointer to record the address of the packet.
@param[out] PktLen Pointer to a UINT32 variable used to record the packet's
length.
**/
VOID
MnpBuildTxPacket (
IN MNP_SERVICE_DATA *MnpServiceData,
IN EFI_MANAGED_NETWORK_TRANSMIT_DATA *TxData,
OUT UINT8 **PktBuf,
OUT UINT32 *PktLen
);
/**
Synchronously send out the packet.
@param[in] MnpServiceData Pointer to the mnp service context data.
@param[in] Packet Pointer to the pakcet buffer.
@param[in] Length The length of the packet.
@param[in, out] Token Pointer to the token the packet generated from.
@retval EFI_SUCCESS The packet is sent out.
@retval EFI_TIMEOUT Time out occurs, the packet isn't sent.
@retval EFI_DEVICE_ERROR An unexpected network error occurs.
**/
EFI_STATUS
MnpSyncSendPacket (
IN MNP_SERVICE_DATA *MnpServiceData,
IN UINT8 *Packet,
IN UINT32 Length,
IN OUT EFI_MANAGED_NETWORK_COMPLETION_TOKEN *Token
);
/**
Try to deliver the received packet to the instance.
@param[in, out] Instance Pointer to the mnp instance context data.
@retval EFI_SUCCESS The received packet is delivered, or there is no
packet to deliver, or there is no available receive
token.
@retval EFI_OUT_OF_RESOURCES The deliver fails due to lack of memory resource.
**/
EFI_STATUS
MnpInstanceDeliverPacket (
IN OUT MNP_INSTANCE_DATA *Instance
);
/**
Recycle the RxData and other resources used to hold and deliver the received
packet.
@param[in] Event The event this notify function registered to.
@param[in] Context Pointer to the context data registerd to the Event.
**/
VOID
EFIAPI
MnpRecycleRxData (
IN EFI_EVENT Event,
IN VOID *Context
);
/**
Try to receive a packet and deliver it.
@param[in, out] MnpDeviceData Pointer to the mnp device context data.
@retval EFI_SUCCESS add return value to function comment
@retval EFI_NOT_STARTED The simple network protocol is not started.
@retval EFI_NOT_READY No packet received.
@retval EFI_DEVICE_ERROR An unexpected error occurs.
**/
EFI_STATUS
MnpReceivePacket (
IN OUT MNP_DEVICE_DATA *MnpDeviceData
);
/**
Allocate a free NET_BUF from MnpDeviceData->FreeNbufQue. If there is none
in the queue, first try to allocate some and add them into the queue, then
fetch the NET_BUF from the updated FreeNbufQue.
@param[in, out] MnpDeviceData Pointer to the MNP_DEVICE_DATA.
@return Pointer to the allocated free NET_BUF structure, if NULL the
operation is failed.
**/
NET_BUF *
MnpAllocNbuf (
IN OUT MNP_DEVICE_DATA *MnpDeviceData
);
/**
Try to reclaim the Nbuf into the buffer pool.
@param[in, out] MnpDeviceData Pointer to the mnp device context data.
@param[in, out] Nbuf Pointer to the NET_BUF to free.
**/
VOID
MnpFreeNbuf (
IN OUT MNP_DEVICE_DATA *MnpDeviceData,
IN OUT NET_BUF *Nbuf
);
/**
Remove the received packets if timeout occurs.
@param[in] Event The event this notify function registered to.
@param[in] Context Pointer to the context data registered to the event.
**/
VOID
EFIAPI
MnpCheckPacketTimeout (
IN EFI_EVENT Event,
IN VOID *Context
);
/**
Poll to update MediaPresent field in SNP ModeData by Snp.GetStatus().
@param[in] Event The event this notify function registered to.
@param[in] Context Pointer to the context data registered to the event.
**/
VOID
EFIAPI
MnpCheckMediaStatus (
IN EFI_EVENT Event,
IN VOID *Context
);
/**
Poll to receive the packets from Snp. This function is either called by upperlayer
protocols/applications or the system poll timer notify mechanism.
@param[in] Event The event this notify function registered to.
@param[in] Context Pointer to the context data registered to the event.
**/
VOID
EFIAPI
MnpSystemPoll (
IN EFI_EVENT Event,
IN VOID *Context
);
/**
Returns the operational parameters for the current MNP child driver. May also
support returning the underlying SNP driver mode data.
The GetModeData() function is used to read the current mode data (operational
parameters) from the MNP or the underlying SNP.
@param[in] This Pointer to the EFI_MANAGED_NETWORK_PROTOCOL instance.
@param[out] MnpConfigData Pointer to storage for MNP operational parameters. Type
EFI_MANAGED_NETWORK_CONFIG_DATA is defined in "Related
Definitions" below.
@param[out] SnpModeData Pointer to storage for SNP operational parameters. This
feature may be unsupported. Type EFI_SIMPLE_NETWORK_MODE
is defined in the EFI_SIMPLE_NETWORK_PROTOCOL.
@retval EFI_SUCCESS The operation completed successfully.
@retval EFI_INVALID_PARAMETER This is NULL.
@retval EFI_UNSUPPORTED The requested feature is unsupported in this
MNP implementation.
@retval EFI_NOT_STARTED This MNP child driver instance has not been
configured. The default values are returned in
MnpConfigData if it is not NULL.
@retval Others The mode data could not be read.
**/
EFI_STATUS
EFIAPI
MnpGetModeData (
IN EFI_MANAGED_NETWORK_PROTOCOL *This,
OUT EFI_MANAGED_NETWORK_CONFIG_DATA *MnpConfigData OPTIONAL,
OUT EFI_SIMPLE_NETWORK_MODE *SnpModeData OPTIONAL
);
/**
Sets or clears the operational parameters for the MNP child driver.
The Configure() function is used to set, change, or reset the operational
parameters for the MNP child driver instance. Until the operational parameters
have been set, no network traffic can be sent or received by this MNP child
driver instance. Once the operational parameters have been reset, no more
traffic can be sent or received until the operational parameters have been set
again.
Each MNP child driver instance can be started and stopped independently of
each other by setting or resetting their receive filter settings with the
Configure() function.
After any successful call to Configure(), the MNP child driver instance is
started. The internal periodic timer (if supported) is enabled. Data can be
transmitted and may be received if the receive filters have also been enabled.
Note: If multiple MNP child driver instances will receive the same packet
because of overlapping receive filter settings, then the first MNP child
driver instance will receive the original packet and additional instances will
receive copies of the original packet.
Note: Warning: Receive filter settings that overlap will consume extra
processor and/or DMA resources and degrade system and network performance.
@param[in] This Pointer to the EFI_MANAGED_NETWORK_PROTOCOL instance.
@param[in] MnpConfigData Pointer to configuration data that will be assigned
to the MNP child driver instance. If NULL, the MNP
child driver instance is reset to startup defaults
and all pending transmit and receive requests are
flushed. Type EFI_MANAGED_NETWORK_CONFIG_DATA is
defined in EFI_MANAGED_NETWORK_PROTOCOL.GetModeData().
@retval EFI_SUCCESS The operation completed successfully.
@retval EFI_INVALID_PARAMETER One or more of the following conditions is
TRUE:
* This is NULL.
* MnpConfigData.ProtocolTypeFilter is not
valid.
The operational data for the MNP child driver
instance is unchanged.
@retval EFI_OUT_OF_RESOURCES Required system resources (usually memory)
could not be allocated.
The MNP child driver instance has been reset to
startup defaults.
@retval EFI_UNSUPPORTED The requested feature is unsupported in
this [MNP] implementation. The operational data
for the MNP child driver instance is unchanged.
@retval EFI_DEVICE_ERROR An unexpected network or system error
occurred. The MNP child driver instance has
been reset to startup defaults.
@retval Others The MNP child driver instance has been reset to
startup defaults.
**/
EFI_STATUS
EFIAPI
MnpConfigure (
IN EFI_MANAGED_NETWORK_PROTOCOL *This,
IN EFI_MANAGED_NETWORK_CONFIG_DATA *MnpConfigData OPTIONAL
);
/**
Translates an IP multicast address to a hardware (MAC) multicast address. This
function may be unsupported in some MNP implementations.
The McastIpToMac() function translates an IP multicast address to a hardware
(MAC) multicast address. This function may be implemented by calling the
underlying EFI_SIMPLE_NETWORK. MCastIpToMac() function, which may also be
unsupported in some MNP implementations.
@param[in] This Pointer to the EFI_MANAGED_NETWORK_PROTOCOL instance.
@param[in] Ipv6Flag Set to TRUE to if IpAddress is an IPv6 multicast address.
Set to FALSE if IpAddress is an IPv4 multicast address.
@param[in] IpAddress Pointer to the multicast IP address (in network byte
order) to convert.
@param[out] MacAddress Pointer to the resulting multicast MAC address.
@retval EFI_SUCCESS The operation completed successfully.
@retval EFI_INVALID_PARAMETER One of the following conditions is TRUE:
* This is NULL.
* IpAddress is NULL.
* IpAddress is not a valid multicast IP
address.
* MacAddress is NULL.
@retval EFI_NOT_STARTED This MNP child driver instance has not been
configured.
@retval EFI_UNSUPPORTED The requested feature is unsupported in this
MNP implementation.
@retval EFI_DEVICE_ERROR An unexpected network or system error occurred.
@retval Others The address could not be converted.
**/
EFI_STATUS
EFIAPI
MnpMcastIpToMac (
IN EFI_MANAGED_NETWORK_PROTOCOL *This,
IN BOOLEAN Ipv6Flag,
IN EFI_IP_ADDRESS *IpAddress,
OUT EFI_MAC_ADDRESS *MacAddress
);
/**
Enables and disables receive filters for multicast address. This function may
be unsupported in some MNP implementations.
The Groups() function only adds and removes multicast MAC addresses from the
filter list. The MNP driver does not transmit or process Internet Group
Management Protocol (IGMP) packets. If JoinFlag is FALSE and MacAddress is
NULL, then all joined groups are left.
@param[in] This Pointer to the EFI_MANAGED_NETWORK_PROTOCOL instance.
@param[in] JoinFlag Set to TRUE to join this multicast group.
Set to FALSE to leave this multicast group.
@param[in] MacAddress Pointer to the multicast MAC group (address) to join or
leave.
@retval EFI_SUCCESS The requested operation completed successfully.
@retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:
* This is NULL.
* JoinFlag is TRUE and MacAddress is NULL.
* MacAddress is not a valid multicast MAC
address.
* The MNP multicast group settings are
unchanged.
@retval EFI_NOT_STARTED This MNP child driver instance has not been
configured.
@retval EFI_ALREADY_STARTED The supplied multicast group is already joined.
@retval EFI_NOT_FOUND The supplied multicast group is not joined.
@retval EFI_DEVICE_ERROR An unexpected network or system error occurred.
The MNP child driver instance has been reset to
startup defaults.
@retval EFI_UNSUPPORTED The requested feature is unsupported in this MNP
implementation.
@retval Others The requested operation could not be completed.
The MNP multicast group settings are unchanged.
**/
EFI_STATUS
EFIAPI
MnpGroups (
IN EFI_MANAGED_NETWORK_PROTOCOL *This,
IN BOOLEAN JoinFlag,
IN EFI_MAC_ADDRESS *MacAddress OPTIONAL
);
/**
Places asynchronous outgoing data packets into the transmit queue.
The Transmit() function places a completion token into the transmit packet
queue. This function is always asynchronous.
The caller must fill in the Token.Event and Token.TxData fields in the
completion token, and these fields cannot be NULL. When the transmit operation
completes, the MNP updates the Token.Status field and the Token.Event is
signaled.
Note: There may be a performance penalty if the packet needs to be
defragmented before it can be transmitted by the network device. Systems in
which performance is critical should review the requirements and features of
the underlying communications device and drivers.
@param[in] This Pointer to the EFI_MANAGED_NETWORK_PROTOCOL instance.
@param[in] Token Pointer to a token associated with the transmit data
descriptor. Type EFI_MANAGED_NETWORK_COMPLETION_TOKEN
is defined in "Related Definitions" below.
@retval EFI_SUCCESS The transmit completion token was cached.
@retval EFI_NOT_STARTED This MNP child driver instance has not been
configured.
@retval EFI_INVALID_PARAMETER One or more of the following conditions is
TRUE:
* This is NULL.
* Token is NULL.
* Token.Event is NULL.
* Token.TxData is NULL.
* Token.TxData.DestinationAddress is not
NULL and Token.TxData.HeaderLength is zero.
* Token.TxData.FragmentCount is zero.
* (Token.TxData.HeaderLength +
Token.TxData.DataLength) is not equal to the
sum of the
Token.TxData.FragmentTable[].FragmentLength
fields.
* One or more of the
Token.TxData.FragmentTable[].FragmentLength
fields is zero.
* One or more of the
Token.TxData.FragmentTable[].FragmentBufferfields
is NULL.
* Token.TxData.DataLength is greater than MTU.
@retval EFI_ACCESS_DENIED The transmit completion token is already in the
transmit queue.
@retval EFI_OUT_OF_RESOURCES The transmit data could not be queued due to a
lack of system resources (usually memory).
@retval EFI_DEVICE_ERROR An unexpected system or network error occurred.
The MNP child driver instance has been reset to
startup defaults.
@retval EFI_NOT_READY The transmit request could not be queued because
the transmit queue is full.
**/
EFI_STATUS
EFIAPI
MnpTransmit (
IN EFI_MANAGED_NETWORK_PROTOCOL *This,
IN EFI_MANAGED_NETWORK_COMPLETION_TOKEN *Token
);
/**
Aborts an asynchronous transmit or receive request.
The Cancel() function is used to abort a pending transmit or receive request.
If the token is in the transmit or receive request queues, after calling this
function, Token.Status will be set to EFI_ABORTED and then Token.Event will be
signaled. If the token is not in one of the queues, which usually means that
the asynchronous operation has completed, this function will not signal the
token and EFI_NOT_FOUND is returned.
@param[in] This Pointer to the EFI_MANAGED_NETWORK_PROTOCOL instance.
@param[in] Token Pointer to a token that has been issued by
EFI_MANAGED_NETWORK_PROTOCOL.Transmit() or
EFI_MANAGED_NETWORK_PROTOCOL.Receive(). If NULL, all
pending tokens are aborted.
@retval EFI_SUCCESS The asynchronous I/O request was aborted and
Token.Event was signaled. When Token is NULL,
all pending requests were aborted and their
events were signaled.
@retval EFI_NOT_STARTED This MNP child driver instance has not been
configured.
@retval EFI_INVALID_PARAMETER This is NULL.
@retval EFI_NOT_FOUND When Token is not NULL, the asynchronous I/O
request was not found in the transmit or
receive queue. It has either completed or was
not issued by Transmit() and Receive().
**/
EFI_STATUS
EFIAPI
MnpCancel (
IN EFI_MANAGED_NETWORK_PROTOCOL *This,
IN EFI_MANAGED_NETWORK_COMPLETION_TOKEN *Token OPTIONAL
);
/**
Places an asynchronous receiving request into the receiving queue.
The Receive() function places a completion token into the receive packet
queue. This function is always asynchronous.
The caller must fill in the Token.Event field in the completion token, and
this field cannot be NULL. When the receive operation completes, the MNP
updates the Token.Status and Token.RxData fields and the Token.Event is
signaled.
@param[in] This Pointer to the EFI_MANAGED_NETWORK_PROTOCOL instance.
@param[in] Token Pointer to a token associated with the receive
data descriptor. Type
EFI_MANAGED_NETWORK_COMPLETION_TOKEN is defined in
EFI_MANAGED_NETWORK_PROTOCOL.Transmit().
@retval EFI_SUCCESS The receive completion token was cached.
@retval EFI_NOT_STARTED This MNP child driver instance has not been
configured.
@retval EFI_INVALID_PARAMETER One or more of the following conditions is
TRUE:
* This is NULL.
* Token is NULL.
* Token.Event is NULL
@retval EFI_OUT_OF_RESOURCES The transmit data could not be queued due to a
lack of system resources (usually memory).
@retval EFI_DEVICE_ERROR An unexpected system or network error occurred.
The MNP child driver instance has been reset to
startup defaults.
@retval EFI_ACCESS_DENIED The receive completion token was already in the
receive queue.
@retval EFI_NOT_READY The receive request could not be queued because
the receive queue is full.
**/
EFI_STATUS
EFIAPI
MnpReceive (
IN EFI_MANAGED_NETWORK_PROTOCOL *This,
IN EFI_MANAGED_NETWORK_COMPLETION_TOKEN *Token
);
/**
Polls for incoming data packets and processes outgoing data packets.
The Poll() function can be used by network drivers and applications to
increase the rate that data packets are moved between the communications
device and the transmit and receive queues.
Normally, a periodic timer event internally calls the Poll() function. But, in
some systems, the periodic timer event may not call Poll() fast enough to
transmit and/or receive all data packets without missing packets. Drivers and
applications that are experiencing packet loss should try calling the Poll()
function more often.
@param[in] This Pointer to the EFI_MANAGED_NETWORK_PROTOCOL instance.
@retval EFI_SUCCESS Incoming or outgoing data was processed.
@retval EFI_NOT_STARTED This MNP child driver instance has not been
configured.
@retval EFI_DEVICE_ERROR An unexpected system or network error occurred. The
MNP child driver instance has been reset to startup
defaults.
@retval EFI_NOT_READY No incoming or outgoing data was processed. Consider
increasing the polling rate.
@retval EFI_TIMEOUT Data was dropped out of the transmit and/or receive
queue. Consider increasing the polling rate.
**/
EFI_STATUS
EFIAPI
MnpPoll (
IN EFI_MANAGED_NETWORK_PROTOCOL *This
);
/**
Configure the Snp receive filters according to the instances' receive filter
settings.
@param[in] MnpDeviceData Pointer to the mnp device context data.
@retval EFI_SUCCESS The receive filters is configured.
@retval EFI_OUT_OF_RESOURCES The receive filters can't be configured due
to lack of memory resource.
**/
EFI_STATUS
MnpConfigReceiveFilters (
IN MNP_DEVICE_DATA *MnpDeviceData
);
#endif