audk/ArmPlatformPkg/Include/Drivers/PL341Dmc.h

337 lines
12 KiB
C

/** @file
*
* Copyright (c) 2011, ARM Limited. All rights reserved.
*
* This program and the accompanying materials
* are licensed and made available under the terms and conditions of the BSD License
* which accompanies this distribution. The full text of the license may be found at
* http://opensource.org/licenses/bsd-license.php
*
* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
*
**/
#ifndef _PL341DMC_H_
#define _PL341DMC_H_
typedef struct {
UINTN HasQos; // has QoS registers
UINTN MaxChip; // number of memory chips accessible
BOOLEAN IsUserCfg;
UINT32 User0Cfg;
UINT32 User2Cfg;
UINT32 RefreshPeriod;
UINT32 CasLatency;
UINT32 WriteLatency;
UINT32 t_mrd;
UINT32 t_ras;
UINT32 t_rc;
UINT32 t_rcd;
UINT32 t_rfc;
UINT32 t_rp;
UINT32 t_rrd;
UINT32 t_wr;
UINT32 t_wtr;
UINT32 t_xp;
UINT32 t_xsr;
UINT32 t_esr;
UINT32 MemoryCfg;
UINT32 MemoryCfg2;
UINT32 MemoryCfg3;
UINT32 ChipCfg0;
UINT32 ChipCfg1;
UINT32 ChipCfg2;
UINT32 ChipCfg3;
UINT32 t_faw;
UINT32 t_data_en;
UINT32 t_wdata_en;
UINT32 ModeReg;
UINT32 ExtModeReg;
} PL341_DMC_CONFIG;
/* Memory config bit fields */
#define DMC_MEMORY_CONFIG_COLUMN_ADDRESS_9 0x1
#define DMC_MEMORY_CONFIG_COLUMN_ADDRESS_10 0x2
#define DMC_MEMORY_CONFIG_COLUMN_ADDRESS_11 0x3
#define DMC_MEMORY_CONFIG_COLUMN_ADDRESS_12 0x4
#define DMC_MEMORY_CONFIG_ROW_ADDRESS_11 (0x0 << 3)
#define DMC_MEMORY_CONFIG_ROW_ADDRESS_12 (0x1 << 3)
#define DMC_MEMORY_CONFIG_ROW_ADDRESS_13 (0x2 << 3)
#define DMC_MEMORY_CONFIG_ROW_ADDRESS_14 (0x3 << 3)
#define DMC_MEMORY_CONFIG_ROW_ADDRESS_15 (0x4 << 3)
#define DMC_MEMORY_CONFIG_ROW_ADDRESS_16 (0x5 << 3)
#define DMC_MEMORY_CONFIG_BURST_2 (0x1 << 15)
#define DMC_MEMORY_CONFIG_BURST_4 (0x2 << 15)
#define DMC_MEMORY_CONFIG_BURST_8 (0x3 << 15)
#define DMC_MEMORY_CONFIG_BURST_16 (0x4 << 15)
#define DMC_MEMORY_CONFIG_ACTIVE_CHIP_1 (0x0 << 21)
#define DMC_MEMORY_CONFIG_ACTIVE_CHIP_2 (0x1 << 21)
#define DMC_MEMORY_CONFIG_ACTIVE_CHIP_3 (0x2 << 21)
#define DMC_MEMORY_CONFIG_ACTIVE_CHIP_4 (0x3 << 21)
#define DMC_MEMORY_CFG2_CLK_ASYNC (0x0 << 0)
#define DMC_MEMORY_CFG2_CLK_SYNC (0x1 << 0)
#define DMC_MEMORY_CFG2_DQM_INIT (0x1 << 2)
#define DMC_MEMORY_CFG2_CKE_INIT (0x1 << 3)
#define DMC_MEMORY_CFG2_BANK_BITS_2 (0x0 << 4)
#define DMC_MEMORY_CFG2_BANK_BITS_3 (0x3 << 4)
#define DMC_MEMORY_CFG2_MEM_WIDTH_16 (0x0 << 6)
#define DMC_MEMORY_CFG2_MEM_WIDTH_32 (0x1 << 6)
#define DMC_MEMORY_CFG2_MEM_WIDTH_64 (0x2 << 6)
#define DMC_MEMORY_CFG2_MEM_WIDTH_RESERVED (0x3 << 6)
//
// DMC Configuration Register Map
//
#define DMC_STATUS_REG 0x00
#define DMC_COMMAND_REG 0x04
#define DMC_DIRECT_CMD_REG 0x08
#define DMC_MEMORY_CONFIG_REG 0x0C
#define DMC_REFRESH_PRD_REG 0x10
#define DMC_CAS_LATENCY_REG 0x14
#define DMC_WRITE_LATENCY_REG 0x18
#define DMC_T_MRD_REG 0x1C
#define DMC_T_RAS_REG 0x20
#define DMC_T_RC_REG 0x24
#define DMC_T_RCD_REG 0x28
#define DMC_T_RFC_REG 0x2C
#define DMC_T_RP_REG 0x30
#define DMC_T_RRD_REG 0x34
#define DMC_T_WR_REG 0x38
#define DMC_T_WTR_REG 0x3C
#define DMC_T_XP_REG 0x40
#define DMC_T_XSR_REG 0x44
#define DMC_T_ESR_REG 0x48
#define DMC_MEMORY_CFG2_REG 0x4C
#define DMC_MEMORY_CFG3_REG 0x50
#define DMC_T_FAW_REG 0x54
#define DMC_T_RDATA_EN 0x5C /* DFI read data enable register */
#define DMC_T_WRLAT_DIFF 0x60 /* DFI write data enable register */
// Returns the state of the memory controller:
#define DMC_STATUS_CONFIG 0x0
#define DMC_STATUS_READY 0x1
#define DMC_STATUS_PAUSED 0x2
#define DMC_STATUS_LOWPOWER 0x3
// Changes the state of the memory controller:
#define DMC_COMMAND_GO 0x0
#define DMC_COMMAND_SLEEP 0x1
#define DMC_COMMAND_WAKEUP 0x2
#define DMC_COMMAND_PAUSE 0x3
#define DMC_COMMAND_CONFIGURE 0x4
#define DMC_COMMAND_ACTIVEPAUSE 0x7
// Determines the command required
#define DMC_DIRECT_CMD_MEMCMD_PRECHARGEALL 0x0
#define DMC_DIRECT_CMD_MEMCMD_AUTOREFRESH (0x1 << 18)
#define DMC_DIRECT_CMD_MEMCMD_MODEREG (0x2 << 18)
#define DMC_DIRECT_CMD_MEMCMD_EXTMODEREG (0x2 << 18)
#define DMC_DIRECT_CMD_MEMCMD_NOP (0x3 << 18)
#define DMC_DIRECT_CMD_MEMCMD_DPD (0x1 << 22)
#define DMC_DIRECT_CMD_BANKADDR(n) ((n & 0x3) << 16)
#define DMC_DIRECT_CMD_CHIP_ADDR(n) ((n & 0x3) << 20)
//
// AXI ID configuration register map
//
#define DMC_ID_0_CFG_REG 0x100
#define DMC_ID_1_CFG_REG 0x104
#define DMC_ID_2_CFG_REG 0x108
#define DMC_ID_3_CFG_REG 0x10C
#define DMC_ID_4_CFG_REG 0x110
#define DMC_ID_5_CFG_REG 0x114
#define DMC_ID_6_CFG_REG 0x118
#define DMC_ID_7_CFG_REG 0x11C
#define DMC_ID_8_CFG_REG 0x120
#define DMC_ID_9_CFG_REG 0x124
#define DMC_ID_10_CFG_REG 0x128
#define DMC_ID_11_CFG_REG 0x12C
#define DMC_ID_12_CFG_REG 0x130
#define DMC_ID_13_CFG_REG 0x134
#define DMC_ID_14_CFG_REG 0x138
#define DMC_ID_15_CFG_REG 0x13C
// Set the QoS
#define DMC_ID_CFG_QOS_DISABLE 0
#define DMC_ID_CFG_QOS_ENABLE 1
#define DMC_ID_CFG_QOS_MIN 2
//
// Chip configuration register map
//
#define DMC_CHIP_0_CFG_REG 0x200
#define DMC_CHIP_1_CFG_REG 0x204
#define DMC_CHIP_2_CFG_REG 0x208
#define DMC_CHIP_3_CFG_REG 0x20C
//
// User Defined Pins
//
#define DMC_USER_STATUS_REG 0x300
#define DMC_USER_0_CFG_REG 0x304
#define DMC_USER_1_CFG_REG 0x308
#define DMC_FEATURE_CRTL_REG 0x30C
#define DMC_USER_2_CFG_REG 0x310
//
// PHY Register Settings
//
#define PHY_PTM_DFI_CLK_RANGE 0xE00 // DDR2 PHY PTM register offset
#define PHY_PTM_IOTERM 0xE04
#define PHY_PTM_PLL_EN 0xe0c
#define PHY_PTM_PLL_RANGE 0xe18
#define PHY_PTM_FEEBACK_DIV 0xe1c
#define PHY_PTM_RCLK_DIV 0xe20
#define PHY_PTM_LOCK_STATUS 0xe28
#define PHY_PTM_INIT_DONE 0xe34
#define PHY_PTM_ADDCOM_IOSTR_OFF 0xec8
#define PHY_PTM_SQU_TRAINING 0xee8
#define PHY_PTM_SQU_STAT 0xeec
// ==============================================================================
// PIPD 40G DDR2/DDR3 PHY Register definitions
//
// Offsets from APB Base Address
// ==============================================================================
#define PHY_BYTE0_OFFSET 0x000
#define PHY_BYTE1_OFFSET 0x200
#define PHY_BYTE2_OFFSET 0x400
#define PHY_BYTE3_OFFSET 0x600
#define PHY_BYTE0_COARSE_SQADJ_INIT 0x064 ;// Coarse squelch adjust
#define PHY_BYTE1_COARSE_SQADJ_INIT 0x264 ;// Coarse squelch adjust
#define PHY_BYTE2_COARSE_SQADJ_INIT 0x464 ;// Coarse squelch adjust
#define PHY_BYTE3_COARSE_SQADJ_INIT 0x664 ;// Coarse squelch adjust
#define PHY_BYTE0_IOSTR_OFFSET 0x004
#define PHY_BYTE1_IOSTR_OFFSET 0x204
#define PHY_BYTE2_IOSTR_OFFSET 0x404
#define PHY_BYTE3_IOSTR_OFFSET 0x604
;//--------------------------------------------------------------------------
// DFI Clock ranges:
#define PHY_PTM_DFI_CLK_RANGE_200MHz 0x0
#define PHY_PTM_DFI_CLK_RANGE_201_267MHz 0x1
#define PHY_PTM_DFI_CLK_RANGE_268_333MHz 0x2
#define PHY_PTM_DFI_CLK_RANGE_334_400MHz 0x3
#define PHY_PTM_DFI_CLK_RANGE_401_533MHz 0x4
#define PHY_PTM_DFI_CLK_RANGE_534_667MHz 0x5
#define PHY_PTM_DFI_CLK_RANGE_668_800MHz 0x6
#define PHY_PTM_DFI_CLK_RANGE_VAL PHY_PTM_DFI_CLK_RANGE_334_400MHz
//--------------------------------------------------------------------------
// PLL Range
#define PHY_PTM_PLL_RANGE_200_400MHz 0x0 // b0 = frequency >= 200 MHz and < 400 MHz
#define PHY_PTM_PLL_RANGE_400_800MHz 0x1 // b1 = frequency >= 400 MHz.
#define PHY_PTM_FEEBACK_DIV_200_400MHz 0x0 // b0 = frequency >= 200 MHz and < 400 MHz
#define PHY_PTM_FEEBACK_DIV_400_800MHz 0x1 // b1 = frequency >= 400 MHz.
#define PHY_PTM_REFCLK_DIV_200_400MHz 0x0
#define PHY_PTM_REFCLK_DIV_400_800MHz 0x1
#define TC_UIOLHNC_MASK 0x000003C0
#define TC_UIOLHNC_SHIFT 0x6
#define TC_UIOLHPC_MASK 0x0000003F
#define TC_UIOLHPC_SHIFT 0x2
#define TC_UIOHOCT_MASK 0x2
#define TC_UIOHOCT_SHIFT 0x1
#define TC_UIOHSTOP_SHIFT 0x0
#define TC_UIOLHXC_VALUE 0x4
#define PHY_PTM_SQU_TRAINING_ENABLE 0x1
#define PHY_PTM_SQU_TRAINING_DISABLE 0x0
//--------------------------------------
// JEDEC DDR2 Device Register definitions and settings
//--------------------------------------
#define DDR_MODESET_SHFT 14
#define DDR_MODESET_MR 0x0 ;// Mode register
#define DDR_MODESET_EMR 0x1 ;// Extended Mode register
#define DDR_MODESET_EMR2 0x2
#define DDR_MODESET_EMR3 0x3
//
// Extended Mode Register settings
//
#define DDR_EMR_OCD_MASK 0x0000380
#define DDR_EMR_OCD_SHIFT 0x7
#define DDR_EMR_RTT_MASK 0x00000044 // DDR2 Device RTT (ODT) settings
#define DDR_EMR_RTT_SHIFT 0x2
#define DDR_EMR_ODS_MASK 0x00000002 // DDR2 Output Drive Strength
#define DDR_EMR_ODS_SHIFT 0x0001
// Termination Values:
#define DDR_EMR_RTT_50R 0x00000044 // DDR2 50 Ohm termination
#define DDR_EMR_RTT_75R 0x00000004 // DDR2 75 Ohm termination
#define DDR_EMR_RTT_150 0x00000040 // DDR2 150 Ohm termination
// Output Drive Strength Values:
#define DDR_EMR_ODS_FULL 0x0 // DDR2 Full Drive Strength
#define DDR_EMR_ODS_HALF 0x1 // DDR2 Half Drive Strength
// OCD values
#define DDR_EMR_OCD_DEFAULT 0x7
#define DDR_EMR_OCD_NS 0x0
#define DDR_EMR_ODS_VAL DDR_EMR_ODS_FULL
#define DDR_SDRAM_START_ADDR 0x10000000
// ----------------------------------------
// PHY IOTERM values
// ----------------------------------------
#define PHY_PTM_IOTERM_OFF 0x0
#define PHY_PTM_IOTERM_150R 0x1
#define PHY_PTM_IOTERM_75R 0x2
#define PHY_PTM_IOTERM_50R 0x3
#define PHY_BYTE_IOSTR_60OHM 0x0
#define PHY_BYTE_IOSTR_40OHM 0x1
#define PHY_BYTE_IOSTR_30OHM 0x2
#define PHY_BYTE_IOSTR_30AOHM 0x3
#define DDR2_MR_BURST_LENGTH_4 (2)
#define DDR2_MR_BURST_LENGTH_8 (3)
#define DDR2_MR_DLL_RESET (1 << 8)
#define DDR2_MR_CAS_LATENCY_4 (4 << 4)
#define DDR2_MR_CAS_LATENCY_5 (5 << 4)
#define DDR2_MR_CAS_LATENCY_6 (6 << 4)
#define DDR2_MR_WR_CYCLES_2 (1 << 9)
#define DDR2_MR_WR_CYCLES_3 (2 << 9)
#define DDR2_MR_WR_CYCLES_4 (3 << 9)
#define DDR2_MR_WR_CYCLES_5 (4 << 9)
#define DDR2_MR_WR_CYCLES_6 (5 << 9)
VOID
PL341DmcInit (
IN UINTN DmcBase,
IN PL341_DMC_CONFIG* DmcConfig
);
VOID PL341DmcPhyInit (
IN UINTN DmcPhyBase
);
VOID PL341DmcTrainPHY (
IN UINTN DmcPhyBase
);
#endif /* _PL341DMC_H_ */