mirror of https://github.com/acidanthera/audk.git
954 lines
32 KiB
C
954 lines
32 KiB
C
/** @file
|
|
The header file provides interface definitions exposed by CSM (Compatible Support Module).
|
|
|
|
The CSM provides compatibility support between the Framework and traditional, legacy BIOS code
|
|
and allows booting a traditional OS or booting an EFI OS off a device that requires a traditional
|
|
option ROM (OpROM).
|
|
|
|
These definitions are from Compatibility Support Module Spec Version 0.97.
|
|
|
|
Copyright (c) 2007-2009, Intel Corporation
|
|
All rights reserved. This program and the accompanying materials
|
|
are licensed and made available under the terms and conditions of the BSD License
|
|
which accompanies this distribution. The full text of the license may be found at
|
|
http://opensource.org/licenses/bsd-license.php
|
|
|
|
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
|
|
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
|
|
|
|
**/
|
|
|
|
#ifndef _FRAMEWORK_LEGACY_16_H_
|
|
#define _FRAMEWORK_LEGACY_16_H_
|
|
|
|
#include <Base.h>
|
|
|
|
#pragma pack(1)
|
|
|
|
typedef UINT8 SERIAL_MODE;
|
|
typedef UINT8 PARALLEL_MODE;
|
|
|
|
#define EFI_COMPATIBILITY16_TABLE_SIGNATURE SIGNATURE_32 ('I', 'F', 'E', '$')
|
|
|
|
///
|
|
/// There is a table located within the traditional BIOS in either the 0xF000:xxxx or 0xE000:xxxx
|
|
/// physical address range. It is located on a 16-byte boundary and provides the physical address of the
|
|
/// entry point for the Compatibility16 functions. These functions provide the platform-specific
|
|
/// information that is required by the generic EfiCompatibility code. The functions are invoked via
|
|
/// thunking by using EFI_LEGACY_BIOS_PROTOCOL.FarCall86() with the 32-bit physical
|
|
/// entry point.
|
|
///
|
|
typedef struct {
|
|
///
|
|
/// The string "$EFI" denotes the start of the EfiCompatibility table. Byte 0 is "I," byte
|
|
/// 1 is "F," byte 2 is "E," and byte 3 is "$" and is normally accessed as a DWORD or UINT32.
|
|
///
|
|
UINT32 Signature;
|
|
|
|
///
|
|
/// The value required such that byte checksum of TableLength equals zero.
|
|
///
|
|
UINT8 TableChecksum;
|
|
|
|
///
|
|
/// The length of this table.
|
|
///
|
|
UINT8 TableLength;
|
|
|
|
///
|
|
/// The major EFI revision for which this table was generated.
|
|
///
|
|
UINT8 EfiMajorRevision;
|
|
|
|
///
|
|
/// The minor EFI revision for which this table was generated.
|
|
///
|
|
UINT8 EfiMinorRevision;
|
|
|
|
///
|
|
/// The major revision of this table.
|
|
///
|
|
UINT8 TableMajorRevision;
|
|
|
|
///
|
|
/// The minor revision of this table.
|
|
///
|
|
UINT8 TableMinorRevision;
|
|
|
|
///
|
|
/// Reserved for future usage.
|
|
///
|
|
UINT16 Reserved;
|
|
|
|
///
|
|
/// The segment of the entry point within the traditional BIOS for Compatibility16 functions.
|
|
///
|
|
UINT16 Compatibility16CallSegment;
|
|
|
|
///
|
|
/// The offset of the entry point within the traditional BIOS for Compatibility16 functions.
|
|
///
|
|
UINT16 Compatibility16CallOffset;
|
|
|
|
///
|
|
/// The segment of the entry point within the traditional BIOS for EfiCompatibility to invoke the PnP installation check.
|
|
///
|
|
UINT16 PnPInstallationCheckSegment;
|
|
|
|
///
|
|
/// The Offset of the entry point within the traditional BIOS for EfiCompatibility to invoke the PnP installation check.
|
|
///
|
|
UINT16 PnPInstallationCheckOffset;
|
|
|
|
///
|
|
/// EFI system resources table. Type EFI_SYSTEM_TABLE is defined in the IntelPlatform Innovation Framework for EFI
|
|
/// Driver Execution Environment Core Interface Specification (DXE CIS).
|
|
///
|
|
UINT32 EfiSystemTable;
|
|
|
|
///
|
|
/// The address of an OEM-provided identifier string. The string is null terminated.
|
|
///
|
|
UINT32 OemIdStringPointer;
|
|
|
|
///
|
|
/// The 32-bit physical address where ACPI RSD PTR is stored within the traditional
|
|
/// BIOS. The remained of the ACPI tables are located at their EFI addresses. The size
|
|
/// reserved is the maximum for ACPI 2.0. The EfiCompatibility will fill in the ACPI
|
|
/// RSD PTR with either the ACPI 1.0b or 2.0 values.
|
|
///
|
|
UINT32 AcpiRsdPtrPointer;
|
|
|
|
///
|
|
/// The OEM revision number. Usage is undefined but provided for OEM module usage.
|
|
///
|
|
UINT16 OemRevision;
|
|
|
|
///
|
|
/// The 32-bit physical address where INT15 E820 data is stored within the traditional
|
|
/// BIOS. The EfiCompatibility code will fill in the E820Pointer value and copy the
|
|
/// data to the indicated area.
|
|
///
|
|
UINT32 E820Pointer;
|
|
|
|
///
|
|
/// The length of the E820 data and is filled in by the EfiCompatibility code.
|
|
///
|
|
UINT32 E820Length;
|
|
|
|
///
|
|
/// The 32-bit physical address where the $PIR table is stored in the traditional BIOS.
|
|
/// The EfiCompatibility code will fill in the IrqRoutingTablePointer value and
|
|
/// copy the data to the indicated area.
|
|
///
|
|
UINT32 IrqRoutingTablePointer;
|
|
|
|
///
|
|
/// The length of the $PIR table and is filled in by the EfiCompatibility code.
|
|
///
|
|
UINT32 IrqRoutingTableLength;
|
|
|
|
///
|
|
/// The 32-bit physical address where the MP table is stored in the traditional BIOS.
|
|
/// The EfiCompatibility code will fill in the MpTablePtr value and copy the data to the indicated area.
|
|
///
|
|
UINT32 MpTablePtr;
|
|
|
|
///
|
|
/// The length of the MP table and is filled in by the EfiCompatibility code.
|
|
///
|
|
UINT32 MpTableLength;
|
|
|
|
///
|
|
/// The segment of the OEM-specific INT table/code.
|
|
///
|
|
UINT16 OemIntSegment;
|
|
|
|
///
|
|
/// The offset of the OEM-specific INT table/code.
|
|
///
|
|
UINT16 OemIntOffset;
|
|
|
|
///
|
|
/// The segment of the OEM-specific 32-bit table/code.
|
|
///
|
|
UINT16 Oem32Segment;
|
|
|
|
///
|
|
/// The offset of the OEM-specific 32-bit table/code.
|
|
///
|
|
UINT16 Oem32Offset;
|
|
|
|
///
|
|
/// The segment of the OEM-specific 16-bit table/code.
|
|
///
|
|
UINT16 Oem16Segment;
|
|
|
|
///
|
|
/// The offset of the OEM-specific 16-bit table/code.
|
|
///
|
|
UINT16 Oem16Offset;
|
|
|
|
///
|
|
/// The segment of the TPM binary passed to 16-bit CSM.
|
|
///
|
|
UINT16 TpmSegment;
|
|
|
|
///
|
|
/// The offset of the TPM binary passed to 16-bit CSM.
|
|
///
|
|
UINT16 TpmOffset;
|
|
|
|
///
|
|
/// A pointer to a string identifying the independent BIOS vendor.
|
|
///
|
|
UINT32 IbvPointer;
|
|
|
|
///
|
|
/// This field is NULL for all systems not supporting PCI Express. This field is the base
|
|
/// value of the start of the PCI Express memory-mapped configuration registers and
|
|
/// must be filled in prior to EfiCompatibility code issuing the Compatibility16 function
|
|
/// Compatibility16InitializeYourself().
|
|
/// Compatibility16InitializeYourself() is defined in Compatability16
|
|
/// Functions.
|
|
///
|
|
UINT32 PciExpressBase;
|
|
|
|
///
|
|
/// Maximum PCI bus number assigned.
|
|
///
|
|
UINT8 LastPciBus;
|
|
} EFI_COMPATIBILITY16_TABLE;
|
|
|
|
///
|
|
/// Functions provided by the CSM binary which communicate between the EfiCompatibility
|
|
/// and Compatability16 code.
|
|
///
|
|
typedef enum {
|
|
///
|
|
/// Causes the Compatibility16 code to do any internal initialization required.
|
|
/// Input:
|
|
/// AX = Compatibility16InitializeYourself
|
|
/// ES:BX = Pointer to EFI_TO_COMPATIBILITY16_INIT_TABLE
|
|
/// Return:
|
|
/// AX = Return Status codes
|
|
///
|
|
Compatibility16InitializeYourself = 0x0000,
|
|
|
|
///
|
|
/// Causes the Compatibility16 BIOS to perform any drive number translations to match the boot sequence.
|
|
/// Input:
|
|
/// AX = Compatibility16UpdateBbs
|
|
/// ES:BX = Pointer to EFI_TO_COMPATIBILITY16_BOOT_TABLE
|
|
/// Return:
|
|
/// AX = Returned status codes
|
|
///
|
|
Compatibility16UpdateBbs = 0x0001,
|
|
|
|
///
|
|
/// Allows the Compatibility16 code to perform any final actions before booting. The Compatibility16
|
|
/// code is read/write.
|
|
/// Input:
|
|
/// AX = Compatibility16PrepareToBoot
|
|
/// ES:BX = Pointer to EFI_TO_COMPATIBILITY16_BOOT_TABLE structure
|
|
/// Return:
|
|
/// AX = Returned status codes
|
|
///
|
|
Compatibility16PrepareToBoot = 0x0002,
|
|
|
|
///
|
|
/// Causes the Compatibility16 BIOS to boot. The Compatibility16 code is Read/Only.
|
|
/// Input:
|
|
/// AX = Compatibility16Boot
|
|
/// Output:
|
|
/// AX = Returned status codes
|
|
///
|
|
Compatibility16Boot = 0x0003,
|
|
|
|
///
|
|
/// Allows the Compatibility16 code to get the last device from which a boot was attempted. This is
|
|
/// stored in CMOS and is the priority number of the last attempted boot device.
|
|
/// Input:
|
|
/// AX = Compatibility16RetrieveLastBootDevice
|
|
/// Output:
|
|
/// AX = Returned status codes
|
|
/// BX = Priority number of the boot device.
|
|
///
|
|
Compatibility16RetrieveLastBootDevice= 0x0004,
|
|
|
|
///
|
|
/// Allows the Compatibility16 code rehook INT13, INT18, and/or INT19 after dispatching a legacy OpROM.
|
|
/// Input:
|
|
/// AX = Compatibility16DispatchOprom
|
|
/// ES:BX = Pointer to EFI_DISPATCH_OPROM_TABLE
|
|
/// Output:
|
|
/// AX = Returned status codes
|
|
/// BX = Number of non-BBS-compliant devices found. Equals 0 if BBS compliant.
|
|
///
|
|
Compatibility16DispatchOprom = 0x0005,
|
|
|
|
///
|
|
/// Finds a free area in the 0xFxxxx or 0xExxxx region of the specified length and returns the address
|
|
/// of that region.
|
|
/// Input:
|
|
/// AX = Compatibility16GetTableAddress
|
|
/// BX = Allocation region
|
|
/// 00 = Allocate from either 0xE0000 or 0xF0000 64 KB blocks.
|
|
/// Bit 0 = 1 Allocate from 0xF0000 64 KB block
|
|
/// Bit 1 = 1 Allocate from 0xE0000 64 KB block
|
|
/// CX = Requested length in bytes.
|
|
/// DX = Required address alignment. Bit mapped. First non-zero bit from the right is the alignment.
|
|
/// Output:
|
|
/// AX = Returned status codes
|
|
/// DS:BX = Address of the region
|
|
///
|
|
Compatibility16GetTableAddress = 0x0006,
|
|
|
|
///
|
|
/// Enables the EfiCompatibility module to do any nonstandard processing of keyboard LEDs or state.
|
|
/// Input:
|
|
/// AX = Compatibility16SetKeyboardLeds
|
|
/// CL = LED status.
|
|
/// Bit 0 Scroll Lock 0 = Off
|
|
/// Bit 1 NumLock
|
|
/// Bit 2 Caps Lock
|
|
/// Output:
|
|
/// AX = Returned status codes
|
|
///
|
|
Compatibility16SetKeyboardLeds = 0x0007,
|
|
|
|
///
|
|
/// Enables the EfiCompatibility module to install an interrupt handler for PCI mass media devices that
|
|
/// do not have an OpROM associated with them. An example is SATA.
|
|
/// Input:
|
|
/// AX = Compatibility16InstallPciHandler
|
|
/// ES:BX = Pointer to EFI_LEGACY_INSTALL_PCI_HANDLER structure
|
|
/// Output:
|
|
/// AX = Returned status codes
|
|
///
|
|
Compatibility16InstallPciHandler = 0x0008
|
|
} EFI_COMPATIBILITY_FUNCTIONS;
|
|
|
|
|
|
///
|
|
/// EFI_DISPATCH_OPROM_TABLE
|
|
///
|
|
typedef struct {
|
|
UINT16 PnPInstallationCheckSegment; ///< Pointer to the PnpInstallationCheck data structure.
|
|
UINT16 PnPInstallationCheckOffset; ///< Pointer to the PnpInstallationCheck data structure.
|
|
UINT16 OpromSegment; ///< The segment where the OpROM was placed. Offset is assumed to be 3.
|
|
UINT8 PciBus; ///< The PCI bus.
|
|
UINT8 PciDeviceFunction; ///< The PCI device * 0x08 | PCI function.
|
|
UINT8 NumberBbsEntries; ///< The number of valid BBS table entries upon entry and exit. The IBV code may
|
|
///< increase this number, if BBS-compliant devices also hook INTs in order to force the
|
|
///< OpROM BIOS Setup to be executed.
|
|
VOID *BbsTablePointer; ///< Pointer to the BBS table.
|
|
UINT16 OpromDestinationSegment; ///< The segment where the OpROM can be relocated to. If this value is 0x0000, this
|
|
///< means that the relocation of this run time code is not supported.
|
|
} EFI_DISPATCH_OPROM_TABLE;
|
|
|
|
///
|
|
/// EFI_TO_COMPATIBILITY16_INIT_TABLE
|
|
///
|
|
typedef struct {
|
|
///
|
|
/// Starting address of memory under 1 MB. The ending address is assumed to be 640 KB or 0x9FFFF.
|
|
///
|
|
UINT32 BiosLessThan1MB;
|
|
|
|
///
|
|
/// Starting address of the high memory block.
|
|
///
|
|
UINT32 HiPmmMemory;
|
|
|
|
///
|
|
/// Length of high memory block.
|
|
///
|
|
UINT32 HiPmmMemorySizeInBytes;
|
|
|
|
///
|
|
/// The segment of the reverse thunk call code.
|
|
///
|
|
UINT16 ReverseThunkCallSegment;
|
|
|
|
///
|
|
/// The offset of the reverse thunk call code.
|
|
///
|
|
UINT16 ReverseThunkCallOffset;
|
|
|
|
///
|
|
/// The number of E820 entries copied to the Compatibility16 BIOS.
|
|
///
|
|
UINT32 NumberE820Entries;
|
|
|
|
///
|
|
/// The amount of usable memory above 1 MB, e.g., E820 type 1 memory.
|
|
///
|
|
UINT32 OsMemoryAbove1Mb;
|
|
|
|
///
|
|
/// The start of thunk code in main memory. Memory cannot be used by BIOS or PMM.
|
|
///
|
|
UINT32 ThunkStart;
|
|
|
|
///
|
|
/// The size of the thunk code.
|
|
///
|
|
UINT32 ThunkSizeInBytes;
|
|
|
|
///
|
|
/// Starting address of memory under 1 MB.
|
|
///
|
|
UINT32 LowPmmMemory;
|
|
|
|
///
|
|
/// Length of low Memory block.
|
|
///
|
|
UINT32 LowPmmMemorySizeInBytes;
|
|
} EFI_TO_COMPATIBILITY16_INIT_TABLE;
|
|
|
|
///
|
|
/// DEVICE_PRODUCER_SERIAL
|
|
///
|
|
typedef struct {
|
|
UINT16 Address; ///< I/O address assigned to the serial port
|
|
UINT8 Irq; ///< IRQ assigned to the serial port.
|
|
SERIAL_MODE Mode; ///< Mode of serial port. Values are defined below.
|
|
} DEVICE_PRODUCER_SERIAL;
|
|
|
|
///
|
|
/// DEVICE_PRODUCER_SERIAL's modes
|
|
///@{
|
|
#define DEVICE_SERIAL_MODE_NORMAL 0x00
|
|
#define DEVICE_SERIAL_MODE_IRDA 0x01
|
|
#define DEVICE_SERIAL_MODE_ASK_IR 0x02
|
|
#define DEVICE_SERIAL_MODE_DUPLEX_HALF 0x00
|
|
#define DEVICE_SERIAL_MODE_DUPLEX_FULL 0x10
|
|
///@)
|
|
|
|
///
|
|
/// DEVICE_PRODUCER_PARALLEL
|
|
///
|
|
typedef struct {
|
|
UINT16 Address; ///< I/O address assigned to the parallel port
|
|
UINT8 Irq; ///< IRQ assigned to the parallel port.
|
|
UINT8 Dma; ///< DMA assigned to the parallel port.
|
|
PARALLEL_MODE Mode; ///< Mode of the parallel port. Values are defined below.
|
|
} DEVICE_PRODUCER_PARALLEL;
|
|
|
|
///
|
|
/// DEVICE_PRODUCER_PARALLEL's modes
|
|
///@{
|
|
#define DEVICE_PARALLEL_MODE_MODE_OUTPUT_ONLY 0x00
|
|
#define DEVICE_PARALLEL_MODE_MODE_BIDIRECTIONAL 0x01
|
|
#define DEVICE_PARALLEL_MODE_MODE_EPP 0x02
|
|
#define DEVICE_PARALLEL_MODE_MODE_ECP 0x03
|
|
///@}
|
|
|
|
///
|
|
/// DEVICE_PRODUCER_FLOPPY
|
|
///
|
|
typedef struct {
|
|
UINT16 Address; ///< I/O address assigned to the floppy
|
|
UINT8 Irq; ///< IRQ assigned to the floppy.
|
|
UINT8 Dma; ///< DMA assigned to the floppy.
|
|
UINT8 NumberOfFloppy; ///< Number of floppies in the system.
|
|
} DEVICE_PRODUCER_FLOPPY;
|
|
|
|
///
|
|
/// LEGACY_DEVICE_FLAGS
|
|
///
|
|
typedef struct {
|
|
UINT32 A20Kybd : 1; ///< A20 controller by keyboard controller.
|
|
UINT32 A20Port90 : 1; ///< A20 controlled by port 0x92.
|
|
UINT32 Reserved : 30; ///< Reserved for future usage.
|
|
} LEGACY_DEVICE_FLAGS;
|
|
|
|
///
|
|
/// DEVICE_PRODUCER_DATA_HEADER
|
|
///
|
|
typedef struct {
|
|
DEVICE_PRODUCER_SERIAL Serial[4]; ///< Data for serial port x. Type DEVICE_PRODUCER_SERIAL is defined below.
|
|
DEVICE_PRODUCER_PARALLEL Parallel[3]; ///< Data for parallel port x. Type DEVICE_PRODUCER_PARALLEL is defined below.
|
|
DEVICE_PRODUCER_FLOPPY Floppy; ///< Data for floppy. Type DEVICE_PRODUCER_FLOPPY is defined below.
|
|
UINT8 MousePresent; ///< Flag to indicate if mouse is present.
|
|
LEGACY_DEVICE_FLAGS Flags; ///< Miscellaneous Boolean state information passed to CSM.
|
|
} DEVICE_PRODUCER_DATA_HEADER;
|
|
|
|
///
|
|
/// ATAPI_IDENTIFY
|
|
///
|
|
typedef struct {
|
|
UINT16 Raw[256]; ///< Raw data from the IDE IdentifyDrive command.
|
|
} ATAPI_IDENTIFY;
|
|
|
|
///
|
|
/// HDD_INFO
|
|
///
|
|
typedef struct {
|
|
///
|
|
/// Status of IDE device. Values are defined below. There is one HDD_INFO structure
|
|
/// per IDE controller. The IdentifyDrive is per drive. Index 0 is master and index
|
|
/// 1 is slave.
|
|
///
|
|
UINT16 Status;
|
|
|
|
///
|
|
/// PCI bus of IDE controller.
|
|
///
|
|
UINT32 Bus;
|
|
|
|
///
|
|
/// PCI device of IDE controller.
|
|
///
|
|
UINT32 Device;
|
|
|
|
///
|
|
/// PCI function of IDE controller.
|
|
///
|
|
UINT32 Function;
|
|
|
|
///
|
|
/// Command ports base address.
|
|
///
|
|
UINT16 CommandBaseAddress;
|
|
|
|
///
|
|
/// Control ports base address.
|
|
///
|
|
UINT16 ControlBaseAddress;
|
|
|
|
///
|
|
/// Bus master address
|
|
///
|
|
UINT16 BusMasterAddress;
|
|
|
|
UINT8 HddIrq;
|
|
|
|
///
|
|
/// Data that identifies the drive data, one per possible attached drive
|
|
///
|
|
ATAPI_IDENTIFY IdentifyDrive[2];
|
|
} HDD_INFO;
|
|
|
|
///
|
|
/// HDD_INFO status bits
|
|
///
|
|
#define HDD_PRIMARY 0x01
|
|
#define HDD_SECONDARY 0x02
|
|
#define HDD_MASTER_ATAPI_CDROM 0x04
|
|
#define HDD_SLAVE_ATAPI_CDROM 0x08
|
|
#define HDD_MASTER_IDE 0x20
|
|
#define HDD_SLAVE_IDE 0x40
|
|
#define HDD_MASTER_ATAPI_ZIPDISK 0x10
|
|
#define HDD_SLAVE_ATAPI_ZIPDISK 0x80
|
|
|
|
///
|
|
/// BBS_STATUS_FLAGS
|
|
///
|
|
typedef struct {
|
|
UINT16 OldPosition : 4; ///< Prior priority.
|
|
UINT16 Reserved1 : 4; ///< Reserved for future use.
|
|
UINT16 Enabled : 1; ///< If 0, ignore this entry.
|
|
UINT16 Failed : 1; ///< 0 = Not known if boot failure occurred.
|
|
///< 1 = Boot attempted failed.
|
|
|
|
///
|
|
/// State of media present.
|
|
/// 00 = No bootable media is present in the device.
|
|
/// 01 = Unknown if a bootable media present.
|
|
/// 10 = Media is present and appears bootable.
|
|
/// 11 = Reserved.
|
|
///
|
|
UINT16 MediaPresent : 2;
|
|
UINT16 Reserved2 : 4; ///< Reserved for future use.
|
|
} BBS_STATUS_FLAGS;
|
|
|
|
///
|
|
/// BBS_TABLE, device type values & boot priority values
|
|
///
|
|
typedef struct {
|
|
///
|
|
/// The boot priority for this boot device. Values are defined below.
|
|
///
|
|
UINT16 BootPriority;
|
|
|
|
///
|
|
/// The PCI bus for this boot device.
|
|
///
|
|
UINT32 Bus;
|
|
|
|
///
|
|
/// The PCI device for this boot device.
|
|
///
|
|
UINT32 Device;
|
|
|
|
///
|
|
/// The PCI function for the boot device.
|
|
///
|
|
UINT32 Function;
|
|
|
|
///
|
|
/// The PCI class for this boot device.
|
|
///
|
|
UINT8 Class;
|
|
|
|
///
|
|
/// The PCI Subclass for this boot device.
|
|
///
|
|
UINT8 SubClass;
|
|
|
|
///
|
|
/// Segment:offset address of an ASCIIZ description string describing the manufacturer.
|
|
///
|
|
UINT16 MfgStringOffset;
|
|
|
|
///
|
|
/// Segment:offset address of an ASCIIZ description string describing the manufacturer.
|
|
///
|
|
UINT16 MfgStringSegment;
|
|
|
|
///
|
|
/// BBS device type. BBS device types are defined below.
|
|
///
|
|
UINT16 DeviceType;
|
|
|
|
///
|
|
/// Status of this boot device. Type BBS_STATUS_FLAGS is defined below.
|
|
///
|
|
BBS_STATUS_FLAGS StatusFlags;
|
|
|
|
///
|
|
/// Segment:Offset address of boot loader for IPL devices or install INT13 handler for
|
|
/// BCV devices.
|
|
///
|
|
UINT16 BootHandlerOffset;
|
|
|
|
///
|
|
/// Segment:Offset address of boot loader for IPL devices or install INT13 handler for
|
|
/// BCV devices.
|
|
///
|
|
UINT16 BootHandlerSegment;
|
|
|
|
///
|
|
/// Segment:offset address of an ASCIIZ description string describing this device.
|
|
///
|
|
UINT16 DescStringOffset;
|
|
|
|
///
|
|
/// Segment:offset address of an ASCIIZ description string describing this device.
|
|
///
|
|
UINT16 DescStringSegment;
|
|
|
|
///
|
|
/// Reserved.
|
|
///
|
|
UINT32 InitPerReserved;
|
|
|
|
///
|
|
/// The use of these fields is IBV dependent. They can be used to flag that an OpROM
|
|
/// has hooked the specified IRQ. The OpROM may be BBS compliant as some SCSI
|
|
/// BBS-compliant OpROMs also hook IRQ vectors in order to run their BIOS Setup
|
|
///
|
|
UINT32 AdditionalIrq13Handler;
|
|
|
|
///
|
|
/// The use of these fields is IBV dependent. They can be used to flag that an OpROM
|
|
/// has hooked the specified IRQ. The OpROM may be BBS compliant as some SCSI
|
|
/// BBS-compliant OpROMs also hook IRQ vectors in order to run their BIOS Setup
|
|
///
|
|
UINT32 AdditionalIrq18Handler;
|
|
|
|
///
|
|
/// The use of these fields is IBV dependent. They can be used to flag that an OpROM
|
|
/// has hooked the specified IRQ. The OpROM may be BBS compliant as some SCSI
|
|
/// BBS-compliant OpROMs also hook IRQ vectors in order to run their BIOS Setup
|
|
///
|
|
UINT32 AdditionalIrq19Handler;
|
|
|
|
///
|
|
/// The use of these fields is IBV dependent. They can be used to flag that an OpROM
|
|
/// has hooked the specified IRQ. The OpROM may be BBS compliant as some SCSI
|
|
/// BBS-compliant OpROMs also hook IRQ vectors in order to run their BIOS Setup
|
|
///
|
|
UINT32 AdditionalIrq40Handler;
|
|
UINT8 AssignedDriveNumber;
|
|
UINT32 AdditionalIrq41Handler;
|
|
UINT32 AdditionalIrq46Handler;
|
|
UINT32 IBV1;
|
|
UINT32 IBV2;
|
|
} BBS_TABLE;
|
|
|
|
///
|
|
/// BBS device type values
|
|
///@{
|
|
#define BBS_FLOPPY 0x01
|
|
#define BBS_HARDDISK 0x02
|
|
#define BBS_CDROM 0x03
|
|
#define BBS_PCMCIA 0x04
|
|
#define BBS_USB 0x05
|
|
#define BBS_EMBED_NETWORK 0x06
|
|
#define BBS_BEV_DEVICE 0x80
|
|
#define BBS_UNKNOWN 0xff
|
|
///@}
|
|
|
|
///
|
|
/// BBS boot priority values
|
|
///@{
|
|
#define BBS_DO_NOT_BOOT_FROM 0xFFFC
|
|
#define BBS_LOWEST_PRIORITY 0xFFFD
|
|
#define BBS_UNPRIORITIZED_ENTRY 0xFFFE
|
|
#define BBS_IGNORE_ENTRY 0xFFFF
|
|
///@}
|
|
|
|
///
|
|
/// SMM_ATTRIBUTES
|
|
///
|
|
typedef struct {
|
|
///
|
|
/// Access mechanism used to generate the soft SMI. Defined types are below. The other
|
|
/// values are reserved for future usage.
|
|
///
|
|
UINT16 Type : 3;
|
|
|
|
///
|
|
/// Size of "port" in bits. Defined values are below.
|
|
///
|
|
UINT16 PortGranularity : 3;
|
|
|
|
///
|
|
/// Size of data in bits. Defined values are below.
|
|
///
|
|
UINT16 DataGranularity : 3;
|
|
|
|
///
|
|
/// Reserved for future use.
|
|
///
|
|
UINT16 Reserved : 7;
|
|
} SMM_ATTRIBUTES;
|
|
|
|
///
|
|
/// SMM_ATTRIBUTES type values
|
|
///@{
|
|
#define STANDARD_IO 0x00
|
|
#define STANDARD_MEMORY 0x01
|
|
///@}
|
|
|
|
///
|
|
/// SMM_ATTRIBUTES port size constants
|
|
///@{
|
|
#define PORT_SIZE_8 0x00
|
|
#define PORT_SIZE_16 0x01
|
|
#define PORT_SIZE_32 0x02
|
|
#define PORT_SIZE_64 0x03
|
|
///@}
|
|
|
|
///
|
|
/// SMM_ATTRIBUTES data size constants
|
|
///@{
|
|
#define DATA_SIZE_8 0x00
|
|
#define DATA_SIZE_16 0x01
|
|
#define DATA_SIZE_32 0x02
|
|
#define DATA_SIZE_64 0x03
|
|
///@}
|
|
|
|
///
|
|
/// SMM_FUNCTION & relating constants
|
|
///
|
|
typedef struct {
|
|
UINT16 Function : 15;
|
|
UINT16 Owner : 1;
|
|
} SMM_FUNCTION;
|
|
|
|
///
|
|
/// SMM_FUNCTION Function constants
|
|
///@{
|
|
#define INT15_D042 0x0000
|
|
#define GET_USB_BOOT_INFO 0x0001
|
|
#define DMI_PNP_50_57 0x0002
|
|
///@}
|
|
|
|
///
|
|
/// SMM_FUNCTION Owner constants
|
|
///@{
|
|
#define STANDARD_OWNER 0x0
|
|
#define OEM_OWNER 0x1
|
|
///@}
|
|
|
|
/**
|
|
* SMM_ENTRY
|
|
*
|
|
* This structure assumes both port and data sizes are 1. SmmAttribute must be
|
|
* properly to reflect that assumption.
|
|
**/
|
|
typedef struct {
|
|
///
|
|
/// Describes the access mechanism, SmmPort, and SmmData sizes. Type
|
|
/// SMM_ATTRIBUTES is defined below.
|
|
///
|
|
SMM_ATTRIBUTES SmmAttributes;
|
|
|
|
///
|
|
/// Function Soft SMI is to perform. Type SMM_FUNCTION is defined below.
|
|
///
|
|
SMM_FUNCTION SmmFunction;
|
|
|
|
///
|
|
/// SmmPort size depends upon SmmAttributes and ranges from2 bytes to 16 bytes
|
|
///
|
|
UINT8 SmmPort;
|
|
|
|
///
|
|
/// SmmData size depends upon SmmAttributes and ranges from2 bytes to 16 bytes
|
|
///
|
|
UINT8 SmmData;
|
|
} SMM_ENTRY;
|
|
|
|
///
|
|
/// SMM_TABLE
|
|
///
|
|
typedef struct {
|
|
UINT16 NumSmmEntries; ///< Number of entries represented by SmmEntry.
|
|
SMM_ENTRY SmmEntry; ///< One entry per function. Type SMM_ENTRY is defined below.
|
|
} SMM_TABLE;
|
|
|
|
///
|
|
/// UDC_ATTRIBUTES
|
|
///
|
|
typedef struct {
|
|
///
|
|
/// This bit set indicates that the ServiceAreaData is valid.
|
|
///
|
|
UINT8 DirectoryServiceValidity : 1;
|
|
|
|
///
|
|
/// This bit set indicates to use the Reserve Area Boot Code Address (RACBA) only if
|
|
/// DirectoryServiceValidity is 0.
|
|
///
|
|
UINT8 RabcaUsedFlag : 1;
|
|
|
|
///
|
|
/// This bit set indicates to execute hard disk diagnostics.
|
|
///
|
|
UINT8 ExecuteHddDiagnosticsFlag : 1;
|
|
|
|
///
|
|
/// Reserved for future use. Set to 0.
|
|
///
|
|
UINT8 Reserved : 5;
|
|
} UDC_ATTRIBUTES;
|
|
|
|
///
|
|
/// UD_TABLE
|
|
///
|
|
typedef struct {
|
|
///
|
|
/// This field contains the bit-mapped attributes of the PARTIES information. Type
|
|
/// UDC_ATTRIBUTES is defined below.
|
|
///
|
|
UDC_ATTRIBUTES Attributes;
|
|
|
|
///
|
|
/// This field contains the zero-based device on which the selected
|
|
/// ServiceDataArea is present. It is 0 for master and 1 for the slave device.
|
|
///
|
|
UINT8 DeviceNumber;
|
|
|
|
///
|
|
/// This field contains the zero-based index into the BbsTable for the parent device.
|
|
/// This index allows the user to reference the parent device information such as PCI
|
|
/// bus, device function.
|
|
///
|
|
UINT8 BbsTableEntryNumberForParentDevice;
|
|
|
|
///
|
|
/// This field contains the zero-based index into the BbsTable for the boot entry.
|
|
///
|
|
UINT8 BbsTableEntryNumberForBoot;
|
|
|
|
///
|
|
/// This field contains the zero-based index into the BbsTable for the HDD diagnostics entry.
|
|
///
|
|
UINT8 BbsTableEntryNumberForHddDiag;
|
|
|
|
///
|
|
/// The raw Beer data.
|
|
///
|
|
UINT8 BeerData[128];
|
|
|
|
///
|
|
/// The raw data of selected service area.
|
|
///
|
|
UINT8 ServiceAreaData[64];
|
|
} UD_TABLE;
|
|
|
|
#define EFI_TO_LEGACY_MAJOR_VERSION 0x02
|
|
#define EFI_TO_LEGACY_MINOR_VERSION 0x00
|
|
#define MAX_IDE_CONTROLLER 8
|
|
|
|
///
|
|
/// EFI_TO_COMPATIBILITY16_BOOT_TABLE
|
|
///
|
|
typedef struct {
|
|
UINT16 MajorVersion; ///< The EfiCompatibility major version number.
|
|
UINT16 MinorVersion; ///< The EfiCompatibility minor version number.
|
|
UINT32 AcpiTable; ///< Location of the RSDT ACPI table. < 4G range
|
|
UINT32 SmbiosTable; ///< Location of the SMBIOS table in EFI memory. < 4G range
|
|
UINT32 SmbiosTableLength;
|
|
//
|
|
// Legacy SIO state
|
|
//
|
|
DEVICE_PRODUCER_DATA_HEADER SioData; ///< Standard traditional device information.
|
|
UINT16 DevicePathType; ///< The default boot type.
|
|
UINT16 PciIrqMask; ///< Mask of which IRQs have been assigned to PCI.
|
|
UINT32 NumberE820Entries; ///< Number of E820 entries. The number can change from the
|
|
///< Compatibility16InitializeYourself() function.
|
|
//
|
|
// Controller & Drive Identify[2] per controller information
|
|
//
|
|
HDD_INFO HddInfo[MAX_IDE_CONTROLLER]; ///< Hard disk drive information, including raw Identify Drive data.
|
|
UINT32 NumberBbsEntries; ///< Number of entries in the BBS table
|
|
UINT32 BbsTable; ///< Pointer to the BBS table. Type BBS_TABLE is defined below.
|
|
UINT32 SmmTable; ///< Pointer to the SMM table. Type SMM_TABLE is defined below.
|
|
UINT32 OsMemoryAbove1Mb; ///< The amount of usable memory above 1 MB, i.e. E820 type 1 memory. This value can
|
|
///< differ from the value in EFI_TO_COMPATIBILITY16_INIT_TABLE as more
|
|
///< memory may have been discovered.
|
|
UINT32 UnconventionalDeviceTable; ///< Information to boot off an unconventional device like a PARTIES partition. Type
|
|
///< UD_TABLE is defined below.
|
|
} EFI_TO_COMPATIBILITY16_BOOT_TABLE;
|
|
|
|
///
|
|
/// EFI_LEGACY_INSTALL_PCI_HANDLER
|
|
///
|
|
typedef struct {
|
|
UINT8 PciBus; ///< The PCI bus of the device.
|
|
UINT8 PciDeviceFun; ///< The PCI device in bits 7:3 and function in bits 2:0.
|
|
UINT8 PciSegment; ///< The PCI segment of the device.
|
|
UINT8 PciClass; ///< The PCI class code of the device.
|
|
UINT8 PciSubclass; ///< The PCI subclass code of the device.
|
|
UINT8 PciInterface; ///< The PCI interface code of the device.
|
|
//
|
|
// Primary section
|
|
//
|
|
UINT8 PrimaryIrq; ///< The primary device IRQ.
|
|
UINT8 PrimaryReserved; ///< Reserved.
|
|
UINT16 PrimaryControl; ///< The primary device control I/O base.
|
|
UINT16 PrimaryBase; ///< The primary device I/O base.
|
|
UINT16 PrimaryBusMaster; ///< The primary device bus master I/O base.
|
|
//
|
|
// Secondary Section
|
|
//
|
|
UINT8 SecondaryIrq; ///< The secondary device IRQ.
|
|
UINT8 SecondaryReserved; ///< Reserved.
|
|
UINT16 SecondaryControl; ///< The secondary device control I/O base.
|
|
UINT16 SecondaryBase; ///< The secondary device I/O base.
|
|
UINT16 SecondaryBusMaster; ///< The secondary device bus master I/O base.
|
|
} EFI_LEGACY_INSTALL_PCI_HANDLER;
|
|
|
|
//
|
|
// Restore default pack value
|
|
//
|
|
#pragma pack()
|
|
|
|
#endif /* _FRAMEWORK_LEGACY_16_H_ */
|