mirror of https://github.com/acidanthera/audk.git
475 lines
15 KiB
C
475 lines
15 KiB
C
/** @file
|
|
Serial I/O Port library functions with no library constructor/destructor
|
|
|
|
Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR>
|
|
Copyright (c) 2011 - 2016, ARM Ltd. All rights reserved.<BR>
|
|
|
|
This program and the accompanying materials
|
|
are licensed and made available under the terms and conditions of the BSD License
|
|
which accompanies this distribution. The full text of the license may be found at
|
|
http://opensource.org/licenses/bsd-license.php
|
|
|
|
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
|
|
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
|
|
|
|
**/
|
|
|
|
#include <Uefi.h>
|
|
|
|
#include <Library/DebugLib.h>
|
|
#include <Library/IoLib.h>
|
|
#include <Library/PcdLib.h>
|
|
|
|
#include <Protocol/SerialIo.h>
|
|
|
|
#include "PL011Uart.h"
|
|
|
|
#define FRACTION_PART_SIZE_IN_BITS 6
|
|
#define FRACTION_PART_MASK ((1 << FRACTION_PART_SIZE_IN_BITS) - 1)
|
|
|
|
//
|
|
// EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE is the only
|
|
// control bit that is not supported.
|
|
//
|
|
STATIC CONST UINT32 mInvalidControlBits = EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE;
|
|
|
|
/**
|
|
|
|
Initialise the serial port to the specified settings.
|
|
The serial port is re-configured only if the specified settings
|
|
are different from the current settings.
|
|
All unspecified settings will be set to the default values.
|
|
|
|
@param UartBase The base address of the serial device.
|
|
@param UartClkInHz The clock in Hz for the serial device.
|
|
Ignored if the PCD PL011UartInteger is not 0
|
|
@param BaudRate The baud rate of the serial device. If the
|
|
baud rate is not supported, the speed will be
|
|
reduced to the nearest supported one and the
|
|
variable's value will be updated accordingly.
|
|
@param ReceiveFifoDepth The number of characters the device will
|
|
buffer on input. Value of 0 will use the
|
|
device's default FIFO depth.
|
|
@param Parity If applicable, this is the EFI_PARITY_TYPE
|
|
that is computed or checked as each character
|
|
is transmitted or received. If the device
|
|
does not support parity, the value is the
|
|
default parity value.
|
|
@param DataBits The number of data bits in each character.
|
|
@param StopBits If applicable, the EFI_STOP_BITS_TYPE number
|
|
of stop bits per character.
|
|
If the device does not support stop bits, the
|
|
value is the default stop bit value.
|
|
|
|
@retval RETURN_SUCCESS All attributes were set correctly on the
|
|
serial device.
|
|
@retval RETURN_INVALID_PARAMETER One or more of the attributes has an
|
|
unsupported value.
|
|
|
|
**/
|
|
RETURN_STATUS
|
|
EFIAPI
|
|
PL011UartInitializePort (
|
|
IN UINTN UartBase,
|
|
IN UINT32 UartClkInHz,
|
|
IN OUT UINT64 *BaudRate,
|
|
IN OUT UINT32 *ReceiveFifoDepth,
|
|
IN OUT EFI_PARITY_TYPE *Parity,
|
|
IN OUT UINT8 *DataBits,
|
|
IN OUT EFI_STOP_BITS_TYPE *StopBits
|
|
)
|
|
{
|
|
UINT32 LineControl;
|
|
UINT32 Divisor;
|
|
UINT32 Integer;
|
|
UINT32 Fractional;
|
|
UINT32 HardwareFifoDepth;
|
|
|
|
HardwareFifoDepth = (PL011_UARTPID2_VER (MmioRead32 (UartBase + UARTPID2)) \
|
|
> PL011_VER_R1P4) \
|
|
? 32 : 16 ;
|
|
// The PL011 supports a buffer of 1, 16 or 32 chars. Therefore we can accept
|
|
// 1 char buffer as the minimum FIFO size. Because everything can be rounded
|
|
// down, there is no maximum FIFO size.
|
|
if ((*ReceiveFifoDepth == 0) || (*ReceiveFifoDepth >= HardwareFifoDepth)) {
|
|
// Enable FIFO
|
|
LineControl = PL011_UARTLCR_H_FEN;
|
|
*ReceiveFifoDepth = HardwareFifoDepth;
|
|
} else {
|
|
// Disable FIFO
|
|
LineControl = 0;
|
|
// Nothing else to do. 1 byte FIFO is default.
|
|
*ReceiveFifoDepth = 1;
|
|
}
|
|
|
|
//
|
|
// Parity
|
|
//
|
|
switch (*Parity) {
|
|
case DefaultParity:
|
|
*Parity = NoParity;
|
|
case NoParity:
|
|
// Nothing to do. Parity is disabled by default.
|
|
break;
|
|
case EvenParity:
|
|
LineControl |= (PL011_UARTLCR_H_PEN | PL011_UARTLCR_H_EPS);
|
|
break;
|
|
case OddParity:
|
|
LineControl |= PL011_UARTLCR_H_PEN;
|
|
break;
|
|
case MarkParity:
|
|
LineControl |= ( PL011_UARTLCR_H_PEN \
|
|
| PL011_UARTLCR_H_SPS \
|
|
| PL011_UARTLCR_H_EPS);
|
|
break;
|
|
case SpaceParity:
|
|
LineControl |= (PL011_UARTLCR_H_PEN | PL011_UARTLCR_H_SPS);
|
|
break;
|
|
default:
|
|
return RETURN_INVALID_PARAMETER;
|
|
}
|
|
|
|
//
|
|
// Data Bits
|
|
//
|
|
switch (*DataBits) {
|
|
case 0:
|
|
*DataBits = 8;
|
|
case 8:
|
|
LineControl |= PL011_UARTLCR_H_WLEN_8;
|
|
break;
|
|
case 7:
|
|
LineControl |= PL011_UARTLCR_H_WLEN_7;
|
|
break;
|
|
case 6:
|
|
LineControl |= PL011_UARTLCR_H_WLEN_6;
|
|
break;
|
|
case 5:
|
|
LineControl |= PL011_UARTLCR_H_WLEN_5;
|
|
break;
|
|
default:
|
|
return RETURN_INVALID_PARAMETER;
|
|
}
|
|
|
|
//
|
|
// Stop Bits
|
|
//
|
|
switch (*StopBits) {
|
|
case DefaultStopBits:
|
|
*StopBits = OneStopBit;
|
|
case OneStopBit:
|
|
// Nothing to do. One stop bit is enabled by default.
|
|
break;
|
|
case TwoStopBits:
|
|
LineControl |= PL011_UARTLCR_H_STP2;
|
|
break;
|
|
case OneFiveStopBits:
|
|
// Only 1 or 2 stop bits are supported
|
|
default:
|
|
return RETURN_INVALID_PARAMETER;
|
|
}
|
|
|
|
// Don't send the LineControl value to the PL011 yet,
|
|
// wait until after the Baud Rate setting.
|
|
// This ensures we do not mess up the UART settings halfway through
|
|
// in the rare case when there is an error with the Baud Rate.
|
|
|
|
//
|
|
// Baud Rate
|
|
//
|
|
|
|
// If PL011 Integer value has been defined then always ignore the BAUD rate
|
|
if (FixedPcdGet32 (PL011UartInteger) != 0) {
|
|
Integer = FixedPcdGet32 (PL011UartInteger);
|
|
Fractional = FixedPcdGet32 (PL011UartFractional);
|
|
} else {
|
|
// If BAUD rate is zero then replace it with the system default value
|
|
if (*BaudRate == 0) {
|
|
*BaudRate = FixedPcdGet32 (PcdSerialBaudRate);
|
|
if (*BaudRate == 0) {
|
|
return RETURN_INVALID_PARAMETER;
|
|
}
|
|
}
|
|
if (0 == UartClkInHz) {
|
|
return RETURN_INVALID_PARAMETER;
|
|
}
|
|
|
|
Divisor = (UartClkInHz * 4) / *BaudRate;
|
|
Integer = Divisor >> FRACTION_PART_SIZE_IN_BITS;
|
|
Fractional = Divisor & FRACTION_PART_MASK;
|
|
}
|
|
|
|
//
|
|
// If PL011 is already initialized, check the current settings
|
|
// and re-initialize only if the settings are different.
|
|
//
|
|
if (((MmioRead32 (UartBase + UARTCR) & PL011_UARTCR_UARTEN) != 0) &&
|
|
(MmioRead32 (UartBase + UARTLCR_H) == LineControl) &&
|
|
(MmioRead32 (UartBase + UARTIBRD) == Integer) &&
|
|
(MmioRead32 (UartBase + UARTFBRD) == Fractional)) {
|
|
// Nothing to do - already initialized with correct attributes
|
|
return RETURN_SUCCESS;
|
|
}
|
|
|
|
// Wait for the end of transmission
|
|
while ((MmioRead32 (UartBase + UARTFR) & PL011_UARTFR_TXFE) == 0);
|
|
|
|
// Disable UART: "The UARTLCR_H, UARTIBRD, and UARTFBRD registers must not be changed
|
|
// when the UART is enabled"
|
|
MmioWrite32 (UartBase + UARTCR, 0);
|
|
|
|
// Set Baud Rate Registers
|
|
MmioWrite32 (UartBase + UARTIBRD, Integer);
|
|
MmioWrite32 (UartBase + UARTFBRD, Fractional);
|
|
|
|
// No parity, 1 stop, no fifo, 8 data bits
|
|
MmioWrite32 (UartBase + UARTLCR_H, LineControl);
|
|
|
|
// Clear any pending errors
|
|
MmioWrite32 (UartBase + UARTECR, 0);
|
|
|
|
// Enable Tx, Rx, and UART overall
|
|
MmioWrite32 (UartBase + UARTCR,
|
|
PL011_UARTCR_RXE | PL011_UARTCR_TXE | PL011_UARTCR_UARTEN);
|
|
|
|
return RETURN_SUCCESS;
|
|
}
|
|
|
|
/**
|
|
|
|
Assert or deassert the control signals on a serial port.
|
|
The following control signals are set according their bit settings :
|
|
. Request to Send
|
|
. Data Terminal Ready
|
|
|
|
@param[in] UartBase UART registers base address
|
|
@param[in] Control The following bits are taken into account :
|
|
. EFI_SERIAL_REQUEST_TO_SEND : assert/deassert the
|
|
"Request To Send" control signal if this bit is
|
|
equal to one/zero.
|
|
. EFI_SERIAL_DATA_TERMINAL_READY : assert/deassert
|
|
the "Data Terminal Ready" control signal if this
|
|
bit is equal to one/zero.
|
|
. EFI_SERIAL_HARDWARE_LOOPBACK_ENABLE : enable/disable
|
|
the hardware loopback if this bit is equal to
|
|
one/zero.
|
|
. EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE : not supported.
|
|
. EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE : enable/
|
|
disable the hardware flow control based on CTS (Clear
|
|
To Send) and RTS (Ready To Send) control signals.
|
|
|
|
@retval RETURN_SUCCESS The new control bits were set on the device.
|
|
@retval RETURN_UNSUPPORTED The device does not support this operation.
|
|
|
|
**/
|
|
RETURN_STATUS
|
|
EFIAPI
|
|
PL011UartSetControl (
|
|
IN UINTN UartBase,
|
|
IN UINT32 Control
|
|
)
|
|
{
|
|
UINT32 Bits;
|
|
|
|
if (Control & (mInvalidControlBits)) {
|
|
return RETURN_UNSUPPORTED;
|
|
}
|
|
|
|
Bits = MmioRead32 (UartBase + UARTCR);
|
|
|
|
if (Control & EFI_SERIAL_REQUEST_TO_SEND) {
|
|
Bits |= PL011_UARTCR_RTS;
|
|
} else {
|
|
Bits &= ~PL011_UARTCR_RTS;
|
|
}
|
|
|
|
if (Control & EFI_SERIAL_DATA_TERMINAL_READY) {
|
|
Bits |= PL011_UARTCR_DTR;
|
|
} else {
|
|
Bits &= ~PL011_UARTCR_DTR;
|
|
}
|
|
|
|
if (Control & EFI_SERIAL_HARDWARE_LOOPBACK_ENABLE) {
|
|
Bits |= PL011_UARTCR_LBE;
|
|
} else {
|
|
Bits &= ~PL011_UARTCR_LBE;
|
|
}
|
|
|
|
if (Control & EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE) {
|
|
Bits |= (PL011_UARTCR_CTSEN | PL011_UARTCR_RTSEN);
|
|
} else {
|
|
Bits &= ~(PL011_UARTCR_CTSEN | PL011_UARTCR_RTSEN);
|
|
}
|
|
|
|
MmioWrite32 (UartBase + UARTCR, Bits);
|
|
|
|
return RETURN_SUCCESS;
|
|
}
|
|
|
|
/**
|
|
|
|
Retrieve the status of the control bits on a serial device.
|
|
|
|
@param[in] UartBase UART registers base address
|
|
@param[out] Control Status of the control bits on a serial device :
|
|
|
|
. EFI_SERIAL_DATA_CLEAR_TO_SEND,
|
|
EFI_SERIAL_DATA_SET_READY,
|
|
EFI_SERIAL_RING_INDICATE,
|
|
EFI_SERIAL_CARRIER_DETECT,
|
|
EFI_SERIAL_REQUEST_TO_SEND,
|
|
EFI_SERIAL_DATA_TERMINAL_READY
|
|
are all related to the DTE (Data Terminal Equipment)
|
|
and DCE (Data Communication Equipment) modes of
|
|
operation of the serial device.
|
|
. EFI_SERIAL_INPUT_BUFFER_EMPTY : equal to one if the
|
|
receive buffer is empty, 0 otherwise.
|
|
. EFI_SERIAL_OUTPUT_BUFFER_EMPTY : equal to one if the
|
|
transmit buffer is empty, 0 otherwise.
|
|
. EFI_SERIAL_HARDWARE_LOOPBACK_ENABLE : equal to one if
|
|
the hardware loopback is enabled (the ouput feeds the
|
|
receive buffer), 0 otherwise.
|
|
. EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE : equal to one if
|
|
a loopback is accomplished by software, 0 otherwise.
|
|
. EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE : equal to
|
|
one if the hardware flow control based on CTS (Clear
|
|
To Send) and RTS (Ready To Send) control signals is
|
|
enabled, 0 otherwise.
|
|
|
|
@retval RETURN_SUCCESS The control bits were read from the serial device.
|
|
|
|
**/
|
|
RETURN_STATUS
|
|
EFIAPI
|
|
PL011UartGetControl (
|
|
IN UINTN UartBase,
|
|
OUT UINT32 *Control
|
|
)
|
|
{
|
|
UINT32 FlagRegister;
|
|
UINT32 ControlRegister;
|
|
|
|
|
|
FlagRegister = MmioRead32 (UartBase + UARTFR);
|
|
ControlRegister = MmioRead32 (UartBase + UARTCR);
|
|
|
|
*Control = 0;
|
|
|
|
if ((FlagRegister & PL011_UARTFR_CTS) == PL011_UARTFR_CTS) {
|
|
*Control |= EFI_SERIAL_CLEAR_TO_SEND;
|
|
}
|
|
|
|
if ((FlagRegister & PL011_UARTFR_DSR) == PL011_UARTFR_DSR) {
|
|
*Control |= EFI_SERIAL_DATA_SET_READY;
|
|
}
|
|
|
|
if ((FlagRegister & PL011_UARTFR_RI) == PL011_UARTFR_RI) {
|
|
*Control |= EFI_SERIAL_RING_INDICATE;
|
|
}
|
|
|
|
if ((FlagRegister & PL011_UARTFR_DCD) == PL011_UARTFR_DCD) {
|
|
*Control |= EFI_SERIAL_CARRIER_DETECT;
|
|
}
|
|
|
|
if ((ControlRegister & PL011_UARTCR_RTS) == PL011_UARTCR_RTS) {
|
|
*Control |= EFI_SERIAL_REQUEST_TO_SEND;
|
|
}
|
|
|
|
if ((ControlRegister & PL011_UARTCR_DTR) == PL011_UARTCR_DTR) {
|
|
*Control |= EFI_SERIAL_DATA_TERMINAL_READY;
|
|
}
|
|
|
|
if ((FlagRegister & PL011_UARTFR_RXFE) == PL011_UARTFR_RXFE) {
|
|
*Control |= EFI_SERIAL_INPUT_BUFFER_EMPTY;
|
|
}
|
|
|
|
if ((FlagRegister & PL011_UARTFR_TXFE) == PL011_UARTFR_TXFE) {
|
|
*Control |= EFI_SERIAL_OUTPUT_BUFFER_EMPTY;
|
|
}
|
|
|
|
if ((ControlRegister & (PL011_UARTCR_CTSEN | PL011_UARTCR_RTSEN))
|
|
== (PL011_UARTCR_CTSEN | PL011_UARTCR_RTSEN)) {
|
|
*Control |= EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE;
|
|
}
|
|
|
|
if ((ControlRegister & PL011_UARTCR_LBE) == PL011_UARTCR_LBE) {
|
|
*Control |= EFI_SERIAL_HARDWARE_LOOPBACK_ENABLE;
|
|
}
|
|
|
|
return RETURN_SUCCESS;
|
|
}
|
|
|
|
/**
|
|
Write data to serial device.
|
|
|
|
@param Buffer Point of data buffer which need to be written.
|
|
@param NumberOfBytes Number of output bytes which are cached in Buffer.
|
|
|
|
@retval 0 Write data failed.
|
|
@retval !0 Actual number of bytes written to serial device.
|
|
|
|
**/
|
|
UINTN
|
|
EFIAPI
|
|
PL011UartWrite (
|
|
IN UINTN UartBase,
|
|
IN UINT8 *Buffer,
|
|
IN UINTN NumberOfBytes
|
|
)
|
|
{
|
|
UINT8* CONST Final = &Buffer[NumberOfBytes];
|
|
|
|
while (Buffer < Final) {
|
|
// Wait until UART able to accept another char
|
|
while ((MmioRead32 (UartBase + UARTFR) & UART_TX_FULL_FLAG_MASK));
|
|
|
|
MmioWrite8 (UartBase + UARTDR, *Buffer++);
|
|
}
|
|
|
|
return NumberOfBytes;
|
|
}
|
|
|
|
/**
|
|
Read data from serial device and save the data in buffer.
|
|
|
|
@param Buffer Point of data buffer which need to be written.
|
|
@param NumberOfBytes Number of output bytes which are cached in Buffer.
|
|
|
|
@retval 0 Read data failed.
|
|
@retval !0 Actual number of bytes read from serial device.
|
|
|
|
**/
|
|
UINTN
|
|
EFIAPI
|
|
PL011UartRead (
|
|
IN UINTN UartBase,
|
|
OUT UINT8 *Buffer,
|
|
IN UINTN NumberOfBytes
|
|
)
|
|
{
|
|
UINTN Count;
|
|
|
|
for (Count = 0; Count < NumberOfBytes; Count++, Buffer++) {
|
|
while ((MmioRead32 (UartBase + UARTFR) & UART_RX_EMPTY_FLAG_MASK) != 0);
|
|
*Buffer = MmioRead8 (UartBase + UARTDR);
|
|
}
|
|
|
|
return NumberOfBytes;
|
|
}
|
|
|
|
/**
|
|
Check to see if any data is available to be read from the debug device.
|
|
|
|
@retval TRUE At least one byte of data is available to be read
|
|
@retval FALSE No data is available to be read
|
|
|
|
**/
|
|
BOOLEAN
|
|
EFIAPI
|
|
PL011UartPoll (
|
|
IN UINTN UartBase
|
|
)
|
|
{
|
|
return ((MmioRead32 (UartBase + UARTFR) & UART_RX_EMPTY_FLAG_MASK) == 0);
|
|
}
|