mirror of https://github.com/acidanthera/audk.git
252 lines
14 KiB
C
252 lines
14 KiB
C
/**
|
|
|
|
Copyright (c) 2012 - 2014, Intel Corporation. All rights reserved
|
|
|
|
This program and the accompanying materials are licensed and made available under
|
|
the terms and conditions of the BSD License that accompanies this distribution.
|
|
The full text of the license may be found at
|
|
http://opensource.org/licenses/bsd-license.php.
|
|
|
|
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
|
|
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
|
|
|
|
|
|
|
|
@file
|
|
PchRegsSata.h
|
|
|
|
@brief
|
|
Register names for VLV SATA controllers
|
|
|
|
Conventions:
|
|
|
|
- Prefixes:
|
|
Definitions beginning with "R_" are registers
|
|
Definitions beginning with "B_" are bits within registers
|
|
Definitions beginning with "V_" are meaningful values of bits within the registers
|
|
Definitions beginning with "S_" are register sizes
|
|
Definitions beginning with "N_" are the bit position
|
|
- In general, PCH registers are denoted by "_PCH_" in register names
|
|
- Registers / bits that are different between PCH generations are denoted by
|
|
"_PCH_<generation_name>_" in register/bit names. e.g., "_PCH_VLV_"
|
|
- Registers / bits that are different between SKUs are denoted by "_<SKU_name>"
|
|
at the end of the register/bit names
|
|
- Registers / bits of new devices introduced in a PCH generation will be just named
|
|
as "_PCH_" without <generation_name> inserted.
|
|
|
|
**/
|
|
#ifndef _PCH_REGS_SATA_H_
|
|
#define _PCH_REGS_SATA_H_
|
|
|
|
///
|
|
/// VLV SATA Message Bus
|
|
///
|
|
#define PCH_SATA_PHY_PORT_ID 0xA3 // SATA PHY Port ID
|
|
#define PCH_SATA_PHY_MMIO_READ_OPCODE 0x00 // CUnit to SATA PHY MMIO Read Opcode
|
|
#define PCH_SATA_PHY_MMIO_WRITE_OPCODE 0x01 // CUnit to SATA PHY MMIO Write Opcode
|
|
|
|
///
|
|
/// SATA Controller Registers (D19:F0)
|
|
///
|
|
#define PCI_DEVICE_NUMBER_PCH_SATA 19
|
|
#define PCI_FUNCTION_NUMBER_PCH_SATA 0
|
|
|
|
#define R_PCH_SATA_ID 0x00 // Identifiers
|
|
#define B_PCH_SATA_ID_DID 0xFFFF0000 // Device ID
|
|
#define B_PCH_SATA_ID_VID 0x0000FFFF // Vendor ID
|
|
#define V_PCH_SATA_VENDOR_ID V_PCH_INTEL_VENDOR_ID
|
|
#define V_PCH_SATA_DEVICE_ID_D_IDE 0x0F20 // Desktop IDE Mode (Ports 0 and 1)
|
|
#define V_PCH_SATA_DEVICE_ID_D_AHCI 0x0F22 // Desktop AHCI Mode (Ports 0 and 1)
|
|
#define V_PCH_SATA_DEVICE_ID_D_RAID 0x2822 // Desktop RAID 0/1/5/10 Mode, based on D19:F0:9Ch[7]
|
|
|
|
#define V_PCH_SATA_DEVICE_ID_M_IDE 0x0F21 // Mobile IDE Mode (Ports 0 and 1)
|
|
#define V_PCH_SATA_DEVICE_ID_M_AHCI 0x0F23 // Mobile AHCI Mode (Ports 0 and 1)
|
|
#define V_PCH_SATA_DEVICE_ID_M_RAID 0x282A // Mobile RAID 0/1/5/10 Mode, based on D19:F0:9Ch[7]
|
|
|
|
#define R_PCH_SATA_COMMAND 0x04 // Command
|
|
#define B_PCH_SATA_COMMAND_INT_DIS BIT10 // Interrupt Disable
|
|
#define B_PCH_SATA_COMMAND_FBE BIT9 // Fast Back-to-back Enable
|
|
#define B_PCH_SATA_COMMAND_SERR_EN BIT8 // SERR# Enable
|
|
#define B_PCH_SATA_COMMAND_WCC BIT7 // Wait Cycle Enable
|
|
#define B_PCH_SATA_COMMAND_PER BIT6 // Parity Error Response Enable
|
|
#define B_PCH_SATA_COMMAND_VPS BIT5 // VGA Palette Snooping Enable
|
|
#define B_PCH_SATA_COMMAND_PMWE BIT4 // Memory Write and Invalidate Enable
|
|
#define B_PCH_SATA_COMMAND_SCE BIT3 // Special Cycle Enable
|
|
#define B_PCH_SATA_COMMAND_BME BIT2 // Bus Master Enable
|
|
#define B_PCH_SATA_COMMAND_MSE BIT1 // Memory Space Enable
|
|
#define B_PCH_SATA_COMMAND_IOSE BIT0 // I/O Space Enable
|
|
|
|
#define R_PCH_SATA_PCISTS 0x06 // Device Status
|
|
#define B_PCH_SATA_PCISTS_DPE BIT15 // Detected Parity Error
|
|
#define B_PCH_SATA_PCISTS_SSE BIT14 // Signaled System Error
|
|
#define B_PCH_SATA_PCISTS_RMA BIT13 // Received Master-Abort Status
|
|
#define B_PCH_SATA_PCISTS_RTA BIT12 // Received Target-Abort Status
|
|
#define B_PCH_SATA_PCISTS_STA BIT11 // Signaled Target-Abort Status
|
|
#define B_PCH_SATA_PCISTS_DEV_STS_MASK (BIT10 | BIT9) // DEVSEL# Timing Status
|
|
#define B_PCH_SATA_PCISTS_DPED BIT8 // Master Data Parity Error Detected
|
|
#define B_PCH_SATA_PCISTS_CAP_LIST BIT4 // Capabilities List
|
|
#define B_PCH_SATA_PCISTS_ITNS BIT3 // Interrupt Status
|
|
|
|
#define R_PCH_SATA_RID 0x08 // Revision ID (8 bits)
|
|
|
|
#define R_PCH_SATA_PI_REGISTER 0x09 // Programming Interface (8 bits)
|
|
#define B_PCH_SATA_PI_REGISTER_SNC BIT3 // Secondary Mode Native Capable
|
|
#define B_PCH_SATA_PI_REGISTER_SNE BIT2 // Secondary Mode Native Enable
|
|
#define B_PCH_SATA_PI_REGISTER_PNC BIT1 // Primary Mode Native Capable
|
|
#define B_PCH_SATA_PI_REGISTER_PNE BIT0 // Primary Mode Native Enable
|
|
|
|
#define R_PCH_SATA_CC 0x0A // Class Code
|
|
#define B_PCH_SATA_CC_BCC 0xFF00 // Base Class Code
|
|
#define B_PCH_SATA_CC_SCC 0x00FF // Sub Class Code
|
|
#define V_PCH_SATA_CC_SCC_IDE 0x01
|
|
#define V_PCH_SATA_CC_SCC_AHCI 0x06
|
|
#define V_PCH_SATA_CC_SCC_RAID 0x04
|
|
|
|
#define R_PCH_SATA_CLS 0x0C // Cache Line Size (8 bits)
|
|
#define B_PCH_SATA_CLS 0xFF
|
|
|
|
#define R_PCH_SATA_MLT 0x0D // Master Latency Timer (8 bits)
|
|
#define B_PCH_SATA_MLT 0xFF
|
|
|
|
#define R_PCH_SATA_HTYPE 0x0E // Header Type
|
|
#define B_PCH_SATA_HTYPE_MFD BIT7 // Multi-function Device
|
|
#define B_PCH_SATA_HTYPE_HL 0x7F // Header Layout
|
|
|
|
#define R_PCH_SATA_PCMD_BAR 0x10 // Primary Command Block Base Address
|
|
#define B_PCH_SATA_PCMD_BAR_BA 0x0000FFF8 // Base Address
|
|
#define B_PCH_SATA_PCMD_BAR_RTE BIT0 // Resource Type Indicator
|
|
|
|
#define R_PCH_SATA_PCTL_BAR 0x14 // Primary Control Block Base Address
|
|
#define B_PCH_SATA_PCTL_BAR_BA 0x0000FFFC // Base Address
|
|
#define B_PCH_SATA_PCTL_BAR_RTE BIT0 // Resource Type Indicator
|
|
|
|
#define R_PCH_SATA_SCMD_BAR 0x18 // Secondary Command Block Base Address
|
|
#define B_PCH_SATA_SCMD_BAR_BA 0x0000FFF8 // Base Address
|
|
#define B_PCH_SATA_SCMD_BAR_RTE BIT0 // Resource Type Indicator
|
|
|
|
#define R_PCH_SATA_SCTL_BAR 0x1C // Secondary Control Block Base Address
|
|
#define B_PCH_SATA_SCTL_BAR_BA 0x0000FFFC // Base Address
|
|
#define B_PCH_SATA_SCTL_BAR_RTE BIT0 // Resource Type Indicator
|
|
|
|
#define R_PCH_SATA_LBAR 0x20 // Legacy IDE Base Address / AHCI Index Data Pair Base Address
|
|
#define B_PCH_SATA_LBAR_BA 0x0000FFE0 // Base Address
|
|
#define B_PCH_SATA_LBAR_BA4 BIT4 // Base Address 4
|
|
#define B_PCH_SATA_LBAR_RTE BIT0 // Resource Type Indicator
|
|
|
|
#define R_PCH_SATA_SIDPBA 0x24 // Serial ATA Index Data Pair Base Address
|
|
#define R_PCH_SATA_ABAR 0x24 // AHCI Base Address
|
|
#define B_PCH_SATA_ABAR_BA 0xFFFFF800 // AHCI Memory Base Address (When CC.SCC not equal 0x01)
|
|
#define V_PCH_SATA_ABAR_LENGTH 0x800 // AHCI Memory Length (When CC.SCC not equal 0x01)
|
|
#define N_PCH_SATA_ABAR_ALIGNMENT 11 // AHCI Base Address Alignment (When CC.SCC not equal 0x01)
|
|
#define B_PCH_SATA_SIDPBA_BA 0x0000FFF0 // Serial ATA Index Data Pair IO Base Address (When CC.SCC equal 0x01)
|
|
#define V_PCH_SATA_SIDPBA_LENGTH 0x10 // Serial ATA Index Data Pair IO Length (When CC.SCC equal 0x01)
|
|
#define N_PCH_SATA_SIDPBA_ALIGNMENT 4 // Serial ATA Index Data Pair Base Address Alignment (When CC.SCC not equal 0x01)
|
|
#define B_PCH_SATA_ABAR_PF BIT3 // Prefetchable
|
|
#define B_PCH_SATA_ABAR_TP (BIT2 | BIT1) // Type
|
|
#define B_PCH_SATA_ABAR_RTE BIT0 // Resource Type Indicator
|
|
|
|
#define R_PCH_SATA_SS 0x2C // Sub System Identifiers
|
|
#define B_PCH_SATA_SS_SSID 0xFFFF0000 // Subsystem ID
|
|
#define B_PCH_SATA_SS_SSVID 0x0000FFFF // Subsystem Vendor ID
|
|
|
|
#define R_PCH_SATA_AHCI_CAP_PTR 0x34 // Capabilities Pointer (8 bits)
|
|
#define B_PCH_SATA_AHCI_CAP_PTR 0xFF
|
|
|
|
#define R_PCH_SATA_INTR 0x3C // Interrupt Information
|
|
#define B_PCH_SATA_INTR_IPIN 0xFFFF0000 // Interrupt Pin
|
|
#define B_PCH_SATA_INTR_ILINE 0x0000FFFF // Interrupt Line
|
|
|
|
#define R_PCH_SATA_PMCS 0x74 // PCI Power Management Control and Status
|
|
#define B_PCH_SATA_PMCS_PMES BIT15 // PME Status
|
|
#define B_PCH_SATA_PMCS_PMEE BIT8 // PME Enable
|
|
#define B_PCH_SATA_PMCS_NSFRST BIT3 // No Soft Reset
|
|
#define V_PCH_SATA_PMCS_NSFRST_1 0x01
|
|
#define V_PCH_SATA_PMCS_NSFRST_0 0x00
|
|
#define B_PCH_SATA_PMCS_PS (BIT1 | BIT0) // Power State
|
|
#define V_PCH_SATA_PMCS_PS_3 0x03
|
|
#define V_PCH_SATA_PMCS_PS_0 0x00
|
|
|
|
#define R_PCH_SATA_MAP 0x90 // Port Mapping Register
|
|
#define B_PCH_SATA_MAP_SPD (BIT14 | BIT13 | BIT12 | BIT11 | BIT10 | BIT9 | BIT8) // SATA Port Disable
|
|
#define B_PCH_SATA_PORT6_DISABLED BIT14
|
|
#define B_PCH_SATA_PORT5_DISABLED BIT13
|
|
#define B_PCH_SATA_PORT4_DISABLED BIT12
|
|
#define B_PCH_SATA_PORT3_DISABLED BIT11
|
|
#define B_PCH_SATA_PORT2_DISABLED BIT10
|
|
#define B_PCH_SATA_PORT1_DISABLED BIT9
|
|
#define B_PCH_SATA_PORT0_DISABLED BIT8
|
|
#define B_PCH_SATA_MAP_SMS_MASK (BIT7 | BIT6) // SATA Mode Select
|
|
#define V_PCH_SATA_MAP_SMS_IDE 0x00
|
|
#define V_PCH_SATA_MAP_SMS_AHCI 0x40
|
|
#define V_PCH_SATA_MAP_SMS_RAID 0x80
|
|
#define B_PCH_SATA_PORT_TO_CONTROLLER_CFG BIT5 // SATA Port-to-Controller Configuration
|
|
|
|
#define R_PCH_SATA_PCS 0x92 // Port Control and Status
|
|
#define S_PCH_SATA_PCS 0x2
|
|
#define B_PCH_SATA_PCS_OOB_RETRY BIT15 // OOB Retry Mode
|
|
#define B_PCH_SATA_PCS_PORT6_DET BIT14 // Port 6 Present
|
|
#define B_PCH_SATA_PCS_PORT5_DET BIT13 // Port 5 Present
|
|
#define B_PCH_SATA_PCS_PORT4_DET BIT12 // Port 4 Present
|
|
#define B_PCH_SATA_PCS_PORT3_DET BIT11 // Port 3 Present
|
|
#define B_PCH_SATA_PCS_PORT2_DET BIT10 // Port 2 Present
|
|
#define B_PCH_SATA_PCS_PORT1_DET BIT9 // Port 1 Present
|
|
#define B_PCH_SATA_PCS_PORT0_DET BIT8 // Port 0 Present
|
|
#define B_PCH_SATA_PCS_PORT5_EN BIT5 // Port 5 Enabled
|
|
#define B_PCH_SATA_PCS_PORT4_EN BIT4 // Port 4 Enabled
|
|
#define B_PCH_SATA_PCS_PORT3_EN BIT3 // Port 3 Enabled
|
|
#define B_PCH_SATA_PCS_PORT2_EN BIT2 // Port 2 Enabled
|
|
#define B_PCH_SATA_PCS_PORT1_EN BIT1 // Port 1 Enabled
|
|
#define B_PCH_SATA_PCS_PORT0_EN BIT0 // Port 0 Enabled
|
|
|
|
#define R_PCH_SATA_AHCI_PI 0x0C // Ports Implemented
|
|
#define B_PCH_SATA_PORT_MASK 0x3F
|
|
#define B_PCH_SATA_PORT5_IMPLEMENTED BIT5 // Port 5 Implemented
|
|
#define B_PCH_SATA_PORT4_IMPLEMENTED BIT4 // Port 4 Implemented
|
|
#define B_PCH_SATA_PORT3_IMPLEMENTED BIT3 // Port 3 Implemented
|
|
#define B_PCH_SATA_PORT2_IMPLEMENTED BIT2 // Port 2 Implemented
|
|
#define B_PCH_SATA_PORT1_IMPLEMENTED BIT1 // Port 1 Implemented
|
|
#define B_PCH_SATA_PORT0_IMPLEMENTED BIT0 // Port 0 Implemented
|
|
|
|
#define R_PCH_SATA_AHCI_P0SSTS 0x128 // Port 0 Serial ATA Status
|
|
#define R_PCH_SATA_AHCI_P1SSTS 0x1A8 // Port 1 Serial ATA Status
|
|
#define B_PCH_SATA_AHCI_PXSSTS_IPM 0x00000F00 // Interface Power Management
|
|
#define B_PCH_SATA_AHCI_PXSSTS_IPM_0 0x00000000
|
|
#define B_PCH_SATA_AHCI_PXSSTS_IPM_1 0x00000100
|
|
#define B_PCH_SATA_AHCI_PXSSTS_IPM_2 0x00000200
|
|
#define B_PCH_SATA_AHCI_PXSSTS_IPM_6 0x00000600
|
|
#define B_PCH_SATA_AHCI_PXSSTS_SPD 0x000000F0 // Current Interface Speed
|
|
#define B_PCH_SATA_AHCI_PXSSTS_SPD_0 0x00000000
|
|
#define B_PCH_SATA_AHCI_PXSSTS_SPD_1 0x00000010
|
|
#define B_PCH_SATA_AHCI_PXSSTS_SPD_2 0x00000020
|
|
#define B_PCH_SATA_AHCI_PXSSTS_SPD_3 0x00000030
|
|
#define B_PCH_SATA_AHCI_PXSSTS_DET 0x0000000F // Device Detection
|
|
#define B_PCH_SATA_AHCI_PXSSTS_DET_0 0x00000000
|
|
#define B_PCH_SATA_AHCI_PXSSTS_DET_1 0x00000001
|
|
#define B_PCH_SATA_AHCI_PXSSTS_DET_3 0x00000003
|
|
#define B_PCH_SATA_AHCI_PXSSTS_DET_4 0x00000004
|
|
|
|
//
|
|
// Macros of VLV capabilities for SATA controller which are used by SATA controller driver
|
|
//
|
|
//
|
|
//
|
|
// Define the individual capabilities of each SATA controller
|
|
//
|
|
#define PCH_SATA_MAX_CONTROLLERS 1 // Max SATA controllers number supported
|
|
#define PCH_SATA_MAX_DEVICES 2 // Max SATA devices number of single SATA channel
|
|
#define PCH_IDE_MAX_CHANNELS 2 // Max IDE channels number of single SATA controller
|
|
#define PCH_IDE_MAX_DEVICES 2 // Max IDE devices number of single SATA channel
|
|
#define PCH_AHCI_MAX_PORTS 2 // Max number of SATA ports in VLV
|
|
#define PCH_IDE_MAX_PORTS 2 // Max number of IDE ports in VLV
|
|
|
|
//
|
|
// GPIOS_14 SATA0GP is the SATA port 0 reset pin.
|
|
//
|
|
#define PCH_GPIO_SATA_PORT0_RESET 14
|
|
//
|
|
// GPIOS_15 SATA1GP is the SATA port 1 reset pin.
|
|
//
|
|
#define PCH_GPIO_SATA_PORT1_RESET 15
|
|
|
|
#endif
|