audk/ArmPlatformPkg/ArmVExpressPkg/Include/VExpressMotherBoard.h

141 lines
6.8 KiB
C

/** @file
* Header defining Versatile Express constants (Base addresses, sizes, flags)
*
* Copyright (c) 2011-2015, ARM Limited. All rights reserved.
*
* This program and the accompanying materials
* are licensed and made available under the terms and conditions of the BSD License
* which accompanies this distribution. The full text of the license may be found at
* http://opensource.org/licenses/bsd-license.php
*
* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
*
**/
#ifndef __VEXPRESSMOTHERBOARD_H_
#define __VEXPRESSMOTHERBOARD_H_
#include <ArmPlatform.h>
/***********************************************************************************
// Motherboard memory-mapped peripherals
************************************************************************************/
// Define MotherBoard SYS flags offsets (from ARM_VE_BOARD_PERIPH_BASE)
#define ARM_VE_SYS_ID_REG (ARM_VE_BOARD_PERIPH_BASE + 0x00000)
#define ARM_VE_SYS_SW_REG (ARM_VE_BOARD_PERIPH_BASE + 0x00004)
#define ARM_VE_SYS_LED_REG (ARM_VE_BOARD_PERIPH_BASE + 0x00008)
#define ARM_VE_SYS_FLAGS_REG (ARM_VE_BOARD_PERIPH_BASE + 0x00030)
#define ARM_VE_SYS_FLAGS_SET_REG (ARM_VE_BOARD_PERIPH_BASE + 0x00030)
#define ARM_VE_SYS_FLAGS_CLR_REG (ARM_VE_BOARD_PERIPH_BASE + 0x00034)
#define ARM_VE_SYS_FLAGS_NV_REG (ARM_VE_BOARD_PERIPH_BASE + 0x00038)
#define ARM_VE_SYS_FLAGS_NV_SET_REG (ARM_VE_BOARD_PERIPH_BASE + 0x00038)
#define ARM_VE_SYS_FLAGS_NV_CLR_REG (ARM_VE_BOARD_PERIPH_BASE + 0x0003C)
#define ARM_VE_SYS_FLASH (ARM_VE_BOARD_PERIPH_BASE + 0x0004C)
#define ARM_VE_SYS_CFGSWR_REG (ARM_VE_BOARD_PERIPH_BASE + 0x00058)
#define ARM_VE_SYS_MISC (ARM_VE_BOARD_PERIPH_BASE + 0x00060)
#define ARM_VE_SYS_PROCID0_REG (ARM_VE_BOARD_PERIPH_BASE + 0x00084)
#define ARM_VE_SYS_PROCID1_REG (ARM_VE_BOARD_PERIPH_BASE + 0x00088)
#define ARM_VE_SYS_CFGDATA_REG (ARM_VE_BOARD_PERIPH_BASE + 0x000A0)
#define ARM_VE_SYS_CFGCTRL_REG (ARM_VE_BOARD_PERIPH_BASE + 0x000A4)
#define ARM_VE_SYS_CFGSTAT_REG (ARM_VE_BOARD_PERIPH_BASE + 0x000A8)
// SP810 Controller
#ifndef SP810_CTRL_BASE
#define SP810_CTRL_BASE (ARM_VE_BOARD_PERIPH_BASE + 0x01000)
#endif
// PL111 Colour LCD Controller - motherboard
#define PL111_CLCD_MOTHERBOARD_BASE (ARM_VE_BOARD_PERIPH_BASE + 0x1F000)
#define PL111_CLCD_MOTHERBOARD_VIDEO_MODE_OSC_ID 1
// VRAM offset for the PL111 Colour LCD Controller on the motherboard
#define VRAM_MOTHERBOARD_BASE (ARM_VE_SMB_PERIPH_BASE + 0x00000)
#define ARM_VE_SYS_PROC_ID_HBI 0xFFF
#define ARM_VE_SYS_PROC_ID_MASK (UINT32)(0xFFU << 24)
#define ARM_VE_SYS_PROC_ID_UNSUPPORTED (UINT32)(0xFFU << 24)
#define ARM_VE_SYS_PROC_ID_CORTEX_A9 (UINT32)(0x0CU << 24)
#define ARM_VE_SYS_PROC_ID_CORTEX_A5 (UINT32)(0x12U << 24)
#define ARM_VE_SYS_PROC_ID_CORTEX_A15 (UINT32)(0x14U << 24)
#define ARM_VE_SYS_PROC_ID_CORTEX_A7 (UINT32)(0x18U << 24)
#define ARM_VE_SYS_PROC_ID_CORTEX_A12 (UINT32)(0x1CU << 24)
// Boot Master Select:
// 0 = Site 1 boot master
// 1 = Site 2 boot master
#define ARM_VE_SYS_MISC_MASTERSITE (1 << 14)
//
// Sites where the peripheral is fitted
//
#define ARM_VE_UNSUPPORTED ~0
#define ARM_VE_MOTHERBOARD_SITE 0
#define ARM_VE_DAUGHTERBOARD_1_SITE 1
#define ARM_VE_DAUGHTERBOARD_2_SITE 2
#define VIRTUAL_SYS_CFG(site,func) (((site) << 24) | (func))
//
// System Configuration Control Functions
//
#define SYS_CFG_OSC 1
#define SYS_CFG_VOLT 2
#define SYS_CFG_AMP 3
#define SYS_CFG_TEMP 4
#define SYS_CFG_RESET 5
#define SYS_CFG_SCC 6
#define SYS_CFG_MUXFPGA 7
#define SYS_CFG_SHUTDOWN 8
#define SYS_CFG_REBOOT 9
#define SYS_CFG_DVIMODE 11
#define SYS_CFG_POWER 12
// Oscillator for Site 1
#define SYS_CFG_OSC_SITE1 VIRTUAL_SYS_CFG(ARM_VE_DAUGHTERBOARD_1_SITE,SYS_CFG_OSC)
// Oscillator for Site 2
#define SYS_CFG_OSC_SITE2 VIRTUAL_SYS_CFG(ARM_VE_DAUGHTERBOARD_2_SITE,SYS_CFG_OSC)
// Can not access the battery backed-up hardware clock on the Versatile Express motherboard
#define SYS_CFG_RTC VIRTUAL_SYS_CFG(ARM_VE_UNSUPPORTED,1)
//
// System ID
//
// All RTSM VE models have the same System ID : 0x225F500
//
// FVP models have a different System ID.
// Default Base model System ID : 0x00201100
// [31:28] Rev - Board revision: 0x0 = Rev A
// [27:16] HBI - HBI board number in BCD: 0x020 = v8 Base Platform
// [15:12] Variant - Build variant of board: 0x1 = Variant B. (GIC 64k map)
// [11:8] Plat - Platform type: 0x1 = Model
// [7:0] FPGA - FPGA build, BCD coded: 0x00
//
//HBI = 010 = Foundation Model
//HBI = 020 = Base Platform
//
// And specifically, the GIC register banks start at the following
// addresses:
// Variant = 0 Variant = 1
//GICD 0x2c001000 0x2f000000
//GICC 0x2c002000 0x2c000000
//GICH 0x2c004000 0x2c010000
//GICV 0x2c006000 0x2c020000
#define ARM_FVP_BASE_BOARD_SYS_ID (0x00200100)
#define ARM_FVP_FOUNDATION_BOARD_SYS_ID (0x00100100)
#define ARM_FVP_SYS_ID_REV_MASK (UINT32)(0xFUL << 28)
#define ARM_FVP_SYS_ID_HBI_MASK (UINT32)(0xFFFUL << 16)
#define ARM_FVP_SYS_ID_VARIANT_MASK (UINT32)(0xFUL << 12)
#define ARM_FVP_SYS_ID_PLAT_MASK (UINT32)(0xFUL << 8 )
#define ARM_FVP_SYS_ID_FPGA_MASK (UINT32)(0xFFUL << 0 )
#define ARM_FVP_GIC_VE_MMAP 0x0
#define ARM_FVP_GIC_BASE_MMAP (UINT32)(1 << 12)
// The default SYS_IDs. These can be changed when starting the model.
#define ARM_RTSM_SYS_ID (0x225F500)
#define ARM_FVP_BASE_SYS_ID (ARM_FVP_BASE_BOARD_SYS_ID | ARM_FVP_GIC_BASE_MMAP)
#define ARM_FVP_FOUNDATION_SYS_ID (ARM_FVP_FOUNDATION_BOARD_SYS_ID | ARM_FVP_GIC_BASE_MMAP)
#endif /* VEXPRESSMOTHERBOARD_H_ */