audk/QuarkPlatformPkg/Library/Tpm12DeviceLibAtmelI2c/TisPc.c

415 lines
11 KiB
C

/** @file
Basic TIS (TPM Interface Specification) functions for Atmel I2C TPM.
Copyright (c) 2016 - 2017, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include <PiPei.h>
#include <Library/Tpm12DeviceLib.h>
#include <Library/BaseLib.h>
#include <Library/TimerLib.h>
#include <Library/DebugLib.h>
#include <Library/I2cLib.h>
//
// Atmel I2C TPM slave address
//
#define ATMEL_I2C_TPM_SLAVE_ADDRESS 0x29
//
// Maximum I2C transfer size for Atmel I2C TPM
//
#define ATMEL_I2C_TPM_MAX_TRANSFER_SIZE 0x10
//
// Default TimeOut values in microseconds
//
#define TIS_TIMEOUT_A ( 750 * 1000) // 750ms
#define TIS_TIMEOUT_B (2000 * 1000) // 2s
#define TIS_TIMEOUT_C ( 750 * 1000) // 750ms
#define TIS_TIMEOUT_D ( 750 * 1000) // 750ms
/**
Send command to Atmel I2c TPM breaking request up into multiple I2C transfers
if required.
@param[in] Buffer Pointer to TPM command data.
@param[in] Length Number of bytes of TPM command data.
@retval EFI_SUCCESS TPM command sent.
@retval EFI_NOT_FOUND TPM chip doesn't exit.
@retval EFI_TIMEOUT Can't get the TPM control in time.
**/
EFI_STATUS
WriteTpmBufferMultiple (
IN UINT8 *Buffer,
IN UINTN Length
)
{
EFI_STATUS Status;
EFI_I2C_DEVICE_ADDRESS I2CDeviceAddr;
UINTN Index;
UINTN PartialLength;
Status = EFI_SUCCESS;
I2CDeviceAddr.I2CDeviceAddress = ATMEL_I2C_TPM_SLAVE_ADDRESS;
DEBUG ((EFI_D_VERBOSE, "WriteTpmBufferMultiple: Addr=%02x Length=%02x\n", I2CDeviceAddr.I2CDeviceAddress, Length));
for (PartialLength = 0; Length > 0; Length -= PartialLength, Buffer += PartialLength) {
//
// Write data to TPM.
//
PartialLength = MIN (Length, ATMEL_I2C_TPM_MAX_TRANSFER_SIZE);
Status = I2cWriteMultipleByte (
I2CDeviceAddr,
EfiI2CSevenBitAddrMode,
&PartialLength,
Buffer
);
DEBUG ((EFI_D_VERBOSE, " "));
for (Index = 0; Index < PartialLength; Index++) {
DEBUG ((EFI_D_VERBOSE, "%02x ", Buffer[Index]));
}
DEBUG ((EFI_D_VERBOSE, "\n"));
if (EFI_ERROR (Status)) {
DEBUG ((EFI_D_VERBOSE, " Status = %r\n", Status));
return Status;
}
}
DEBUG ((EFI_D_VERBOSE, " Status = %r\n", Status));
return Status;
}
/**
Receive a response to a command from Atmel I2c TPM breaking response into
multiple I2C transfers if required.
@param[out] Buffer Pointer to TPM response data.
@param[in] Length Maximum number of bytes to receive.
@retval EFI_SUCCESS TPM response received.
@retval EFI_NOT_FOUND TPM chip doesn't exit.
@retval EFI_TIMEOUT Can't get the TPM control in time.
**/
EFI_STATUS
ReadTpmBufferMultiple (
OUT UINT8 *Buffer,
IN UINTN Length
)
{
EFI_STATUS Status;
EFI_I2C_DEVICE_ADDRESS I2CDeviceAddr;
UINTN WriteLength;
UINTN Index;
UINTN PartialLength;
Status = EFI_SUCCESS;
I2CDeviceAddr.I2CDeviceAddress = ATMEL_I2C_TPM_SLAVE_ADDRESS;
WriteLength = 0;
DEBUG ((EFI_D_VERBOSE, "ReadTpmBufferMultiple: Addr=%02x Length=%02x\n", I2CDeviceAddr.I2CDeviceAddress, Length));
for (PartialLength = 0; Length > 0; Length -= PartialLength, Buffer += PartialLength) {
//
// Read data from TPM.
//
PartialLength = MIN (Length, ATMEL_I2C_TPM_MAX_TRANSFER_SIZE);
Status = I2cReadMultipleByte (
I2CDeviceAddr,
EfiI2CSevenBitAddrMode,
&WriteLength,
&PartialLength,
Buffer
);
if (!EFI_ERROR (Status)) {
DEBUG ((EFI_D_VERBOSE, " "));
for (Index = 0; Index < PartialLength; Index++) {
DEBUG ((EFI_D_VERBOSE, "%02x ", Buffer[Index]));
}
DEBUG ((EFI_D_VERBOSE, "\n"));
}
if (EFI_ERROR (Status)) {
DEBUG ((EFI_D_VERBOSE, " Status = %r\n", Status));
return Status;
}
}
DEBUG ((EFI_D_VERBOSE, " Status = %r\n", Status));
return Status;
}
/**
This service requests use TPM12.
@retval EFI_SUCCESS Get the control of TPM12 chip.
@retval EFI_NOT_FOUND TPM12 not found.
@retval EFI_DEVICE_ERROR Unexpected device behavior.
**/
EFI_STATUS
EFIAPI
Tpm12RequestUseTpm (
VOID
)
{
EFI_STATUS Status;
UINT8 Data;
UINT64 Current;
UINT64 Previous;
UINT64 Total;
UINT64 Start;
UINT64 End;
UINT64 Timeout;
INT64 Cycle;
INT64 Delta;
//
// Get the current timer value
//
Current = GetPerformanceCounter();
//
// Initialize local variables
//
Start = 0;
End = 0;
Total = 0;
//
// Retrieve the performance counter properties and compute the number of
// performance counter ticks required to reach the maximum TIS timeout of
// TIS_TIMEOUT_A. TIS_TIMEOUT_A is in microseconds.
//
Timeout = DivU64x32 (
MultU64x32 (
GetPerformanceCounterProperties (&Start, &End),
TIS_TIMEOUT_A
),
1000000
);
Cycle = End - Start;
if (Cycle < 0) {
Cycle = -Cycle;
}
Cycle++;
//
// Attempt to read a byte from the Atmel I2C TPM
//
do {
Status = ReadTpmBufferMultiple (&Data, sizeof(Data));
Previous = Current;
Current = GetPerformanceCounter();
Delta = (INT64) (Current - Previous);
if (Start > End) {
Delta = -Delta;
}
if (Delta < 0) {
Delta += Cycle;
}
Total += Delta;
if (Total >= Timeout) {
Status = EFI_TIMEOUT;
DEBUG ((EFI_D_ERROR, "Atmel I2C TPM failed to read: %r\n", Status));
return Status;
}
} while (EFI_ERROR (Status));
return EFI_SUCCESS;
}
/**
This service enables the sending of commands to the TPM12.
@param[in] InputParameterBlockSize Size of the TPM12 input parameter block.
@param[in] InputParameterBlock Pointer to the TPM12 input parameter block.
@param[in,out] OutputParameterBlockSize Size of the TPM12 output parameter block.
@param[in] OutputParameterBlock Pointer to the TPM12 output parameter block.
@retval EFI_SUCCESS The command byte stream was successfully sent to
the device and a response was successfully received.
@retval EFI_DEVICE_ERROR The command was not successfully sent to the
device or a response was not successfully received
from the device.
@retval EFI_BUFFER_TOO_SMALL The output parameter block is too small.
**/
EFI_STATUS
EFIAPI
Tpm12SubmitCommand (
IN UINT32 InputParameterBlockSize,
IN UINT8 *InputParameterBlock,
IN OUT UINT32 *OutputParameterBlockSize,
IN UINT8 *OutputParameterBlock
)
{
EFI_STATUS Status;
UINT32 TpmOutSize;
TPM_RSP_COMMAND_HDR *ResponseHeader;
UINT64 Current;
UINT64 Previous;
UINT64 Total;
UINT64 Start;
UINT64 End;
UINT64 Timeout;
INT64 Cycle;
INT64 Delta;
//
// Initialize local variables
//
Start = 0;
End = 0;
Total = 0;
//
// Make sure response buffer is big enough to hold a response header
//
if (*OutputParameterBlockSize < sizeof (TPM_RSP_COMMAND_HDR)) {
Status = EFI_BUFFER_TOO_SMALL;
goto Done;
}
//
// Get the current timer value
//
Current = GetPerformanceCounter();
//
// Retrieve the performance counter properties and compute the number of
// performance counter ticks required to reach the maximum TIS timeout of
// TIS_TIMEOUT_A. TIS_TIMEOUT_A is in microseconds.
//
Timeout = DivU64x32 (
MultU64x32 (
GetPerformanceCounterProperties (&Start, &End),
TIS_TIMEOUT_A
),
1000000
);
Cycle = End - Start;
if (Cycle < 0) {
Cycle = -Cycle;
}
Cycle++;
//
// Send command
//
do {
Status = WriteTpmBufferMultiple (InputParameterBlock, InputParameterBlockSize);
Previous = Current;
Current = GetPerformanceCounter();
Delta = (INT64) (Current - Previous);
if (Start > End) {
Delta = -Delta;
}
if (Delta < 0) {
Delta += Cycle;
}
Total += Delta;
if (Total >= Timeout) {
Status = EFI_TIMEOUT;
goto Done;
}
} while (EFI_ERROR (Status));
//
// Receive response header
//
do {
Status = ReadTpmBufferMultiple (OutputParameterBlock, sizeof (TPM_RSP_COMMAND_HDR));
Previous = Current;
Current = GetPerformanceCounter();
Delta = (INT64) (Current - Previous);
if (Start > End) {
Delta = -Delta;
}
if (Delta < 0) {
Delta += Cycle;
}
Total += Delta;
if (Total >= Timeout) {
Status = EFI_TIMEOUT;
goto Done;
}
} while (EFI_ERROR (Status));
//
// Check the response data header (tag, parasize and returncode)
//
ResponseHeader = (TPM_RSP_COMMAND_HDR *)OutputParameterBlock;
if (SwapBytes16 (ReadUnaligned16 (&ResponseHeader->tag)) != TPM_TAG_RSP_COMMAND) {
Status = EFI_DEVICE_ERROR;
goto Done;
}
TpmOutSize = SwapBytes32 (ReadUnaligned32 (&ResponseHeader->paramSize));
if (TpmOutSize == sizeof (TPM_RSP_COMMAND_HDR)) {
*OutputParameterBlockSize = TpmOutSize;
Status = EFI_SUCCESS;
goto Done;
}
if (TpmOutSize < sizeof (TPM_RSP_COMMAND_HDR)) {
Status = EFI_DEVICE_ERROR;
goto Done;
}
if (*OutputParameterBlockSize < TpmOutSize) {
Status = EFI_BUFFER_TOO_SMALL;
goto Done;
}
*OutputParameterBlockSize = TpmOutSize;
//
// Receive the remaining data in the response header
//
do {
Status = ReadTpmBufferMultiple (
OutputParameterBlock + sizeof (TPM_RSP_COMMAND_HDR),
TpmOutSize - sizeof (TPM_RSP_COMMAND_HDR)
);
Previous = Current;
Current = GetPerformanceCounter();
Delta = (INT64) (Current - Previous);
if (Start > End) {
Delta = -Delta;
}
if (Delta < 0) {
Delta += Cycle;
}
Total += Delta;
if (Total >= Timeout) {
Status = EFI_TIMEOUT;
goto Done;
}
} while (EFI_ERROR (Status));
Done:
DEBUG ((
EFI_D_VERBOSE,
"Tpm12SubmitCommand() Status = %r Time = %ld ms\n",
Status,
DivU64x64Remainder (
MultU64x32 (Total, 1000),
GetPerformanceCounterProperties (NULL, NULL),
NULL
)
));
return Status;
}