audk/Vlv2TbltDevicePkg/Library/SerialPortLib/SioInit.h

69 lines
3.2 KiB
C

/** @file
Header file of Serial port hardware definition.
Copyright (c) 2012 - 2017, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials are licensed and made available under
the terms and conditions of the BSD License that accompanies this distribution.
The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php.
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#ifndef _SIO_INIT_H_
#define _SIO_INIT_H_
#define WPCN381U_CONFIG_INDEX 0x2E
#define WPCN381U_CONFIG_DATA 0x2F
#define WPCN381U_CONFIG_INDEX1 0x164E
#define WPCN381U_CONFIG_DATA1 0x164F
#define WPCN381U_CHIP_ID 0xF4
#define WDCP376_CHIP_ID 0xF1
//
// SIO Logical Devices Numbers
//
#define WPCN381U_LDN_UART0 0x03 // LDN for Serial Port Controller
#define WPCN381U_LDN_UART1 0x02 // LDN for Parallel Port Controller
#define WPCN381U_LDN_PS2K 0x06 // LDN for PS2 Keyboard Controller
#define WPCN381U_LDN_PS2M 0x05 // LDN for PS2 Mouse Controller
#define WPCN381U_KB_BASE1_ADDRESS 0x60 // Base Address of KB controller
#define WPCN381U_KB_BASE2_ADDRESS 0x64 // Base Address of KB controller
#define SIO_KBC_CLOCK 0x01 // 0/1/2 - 8/12/16 MHz KBC Clock Source
#define WPCN381U_LDN_GPIO 0x07 // LDN for GPIO
//
// SIO Registers Layout
//
#define WPCN381U_LD_SEL_REGISTER 0x07 // Logical Device Select Register Address
#define WPCN381U_DEV_ID_REGISTER 0x20 // Device Identification Register Address
#define WPCN381U_ACTIVATE_REGISTER 0x30 // Device Identification Register Address
#define WPCN381U_BASE1_HI_REGISTER 0x60 // Device BaseAddres Register #1 MSB Address
#define WPCN381U_BASE1_LO_REGISTER 0x61 // Device BaseAddres Register #1 LSB Address
#define WPCN381U_BASE2_HI_REGISTER 0x62 // Device BaseAddres Register #1 MSB Address
#define WPCN381U_BASE2_LO_REGISTER 0x63 // Device Ba1eAddres Register #1 LSB Address
#define WPCN381U_IRQ1_REGISTER 0x70 // Device IRQ Register #1 Address
#define WPCN381U_IRQ2_REGISTER 0x71 // Device IRQ Register #2 Address
//
// SIO Activation Values
//
#define WPCN381U_ACTIVATE_VALUE 0x01 // Value to activate Device
#define WPCN381U_DEACTIVATE_VALUE 0x00 // Value to deactivate Device
//
// SIO GPIO
//
#define WPCN381U_GPIO_BASE_ADDRESS 0x0A20 // SIO GPIO Base Address
//
// SIO Serial Port Settings
//
#define WPCN381U_SERIAL_PORT0_BASE_ADDRESS 0x03F8 // Base Address of Serial Port 0 (COMA / UART0)
#define WPCN381U_SERIAL_PORT1_BASE_ADDRESS 0x02F8 // Base Address of Serial Port 1 (COMB / UART1)
#endif