audk/MdePkg/Include/Protocol/IsaHc.h

111 lines
3.9 KiB
C

/** @file
ISA HC Protocol as defined in the PI 1.2.1 specification.
This protocol provides registration for ISA devices on a positive- or
subtractive-decode ISA bus. It allows devices to be registered and also
handles opening and closing the apertures which are positively-decoded.
Copyright (c) 2015 - 2018, Intel Corporation. All rights reserved.<BR>
SPDX-License-Identifier: BSD-2-Clause-Patent
@par Revision Reference:
This protocol is from PI Version 1.2.1.
**/
#ifndef __ISA_HC_PROTOCOL_H__
#define __ISA_HC_PROTOCOL_H__
#define EFI_ISA_HC_PROTOCOL_GUID \
{ \
0xbcdaf080, 0x1bde, 0x4e22, {0xae, 0x6a, 0x43, 0x54, 0x1e, 0x12, 0x8e, 0xc4} \
}
#define EFI_ISA_HC_SERVICE_BINDING_PROTOCOL_GUID \
{ \
0xfad7933a, 0x6c21, 0x4234, {0xa4, 0x34, 0x0a, 0x8a, 0x0d, 0x2b, 0x07, 0x81} \
}
typedef struct _EFI_ISA_HC_PROTOCOL EFI_ISA_HC_PROTOCOL;
typedef struct _EFI_ISA_HC_PROTOCOL *PEFI_ISA_HC_PROTOCOL;
/**
Open I/O aperture.
This function opens an I/O aperture in a ISA Host Controller for the I/O addresses
specified by IoAddress to IoAddress + IoLength - 1. It may be possible that a
single hardware aperture may be used for more than one device. This function
tracks the number of times that each aperture is referenced, and does not close
the hardware aperture (via CloseIoAperture()) until there are no more references to it.
@param This A pointer to this instance of the EFI_ISA_HC_PROTOCOL.
@param IoAddress An unsigned integer that specifies the first byte of the
I/O space required.
@param IoLength An unsigned integer that specifies the number of bytes
of the I/O space required.
@param IoApertureHandle A pointer to the returned I/O aperture handle. This
value can be used on subsequent calls to CloseIoAperture().
@retval EFI_SUCCESS The I/O aperture was opened successfully.
@retval EFI_UNSUPPORTED The ISA Host Controller is a subtractive-decode controller.
@retval EFI_OUT_OF_RESOURCES There is no available I/O aperture.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_ISA_HC_OPEN_IO) (
IN CONST EFI_ISA_HC_PROTOCOL *This,
IN UINT16 IoAddress,
IN UINT16 IoLength,
OUT UINT64 *IoApertureHandle
);
/**
Close I/O aperture.
This function closes a previously opened I/O aperture handle. If there are no
more I/O aperture handles that refer to the hardware I/O aperture resource,
then the hardware I/O aperture is closed. It may be possible that a single
hardware aperture may be used for more than one device. This function tracks
the number of times that each aperture is referenced, and does not close the
hardware aperture (via CloseIoAperture()) until there are no more references to it.
@param This A pointer to this instance of the EFI_ISA_HC_PROTOCOL.
@param IoApertureHandle The I/O aperture handle previously returned from a
call to OpenIoAperture().
@retval EFI_SUCCESS The IO aperture was closed successfully.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_ISA_HC_CLOSE_IO) (
IN CONST EFI_ISA_HC_PROTOCOL *This,
IN UINT64 IoApertureHandle
);
///
/// ISA HC Protocol
///
struct _EFI_ISA_HC_PROTOCOL {
///
/// The version of this protocol. Higher version numbers are backward
/// compatible with lower version numbers.
///
UINT32 Version;
///
/// Open an I/O aperture.
///
EFI_ISA_HC_OPEN_IO OpenIoAperture;
///
/// Close an I/O aperture.
///
EFI_ISA_HC_CLOSE_IO CloseIoAperture;
};
///
/// Reference to variable defined in the .DEC file
///
extern EFI_GUID gEfiIsaHcProtocolGuid;
extern EFI_GUID gEfiIsaHcServiceBindingProtocolGuid;
#endif // __ISA_HC_H__