tyler.durden
/
audk
mirror of https://github.com/acidanthera/audk.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
audk/UefiCpuPkg/Library/MpInitLib/MpLib.c

1956 lines
58 KiB
C
Raw Blame History

/** @file
CPU MP Initialize Library common functions.
Copyright (c) 2016, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include "MpLib.h"
EFI_GUID mCpuInitMpLibHobGuid = CPU_INIT_MP_LIB_HOB_GUID;
/**
The function will check if BSP Execute Disable is enabled.
DxeIpl may have enabled Execute Disable for BSP,
APs need to get the status and sync up the settings.
@retval TRUE BSP Execute Disable is enabled.
@retval FALSE BSP Execute Disable is not enabled.
**/
BOOLEAN
IsBspExecuteDisableEnabled (
VOID
)
{
UINT32 Eax;
CPUID_EXTENDED_CPU_SIG_EDX Edx;
MSR_IA32_EFER_REGISTER EferMsr;
BOOLEAN Enabled;
Enabled = FALSE;
AsmCpuid (CPUID_EXTENDED_FUNCTION, &Eax, NULL, NULL, NULL);
if (Eax >= CPUID_EXTENDED_CPU_SIG) {
AsmCpuid (CPUID_EXTENDED_CPU_SIG, NULL, NULL, NULL, &Edx.Uint32);
//
// CPUID 0x80000001
// Bit 20: Execute Disable Bit available.
//
if (Edx.Bits.NX != 0) {
EferMsr.Uint64 = AsmReadMsr64 (MSR_IA32_EFER);
//
// MSR 0xC0000080
// Bit 11: Execute Disable Bit enable.
//
if (EferMsr.Bits.NXE != 0) {
Enabled = TRUE;
}
}
}
return Enabled;
}
/**
Worker function for SwitchBSP().
Worker function for SwitchBSP(), assigned to the AP which is intended
to become BSP.
@param[in] Buffer Pointer to CPU MP Data
**/
VOID
EFIAPI
FutureBSPProc (
IN VOID *Buffer
)
{
CPU_MP_DATA *DataInHob;
DataInHob = (CPU_MP_DATA *) Buffer;
AsmExchangeRole (&DataInHob->APInfo, &DataInHob->BSPInfo);
}
/**
Get the Application Processors state.
@param[in] CpuData The pointer to CPU_AP_DATA of specified AP
@return The AP status
**/
CPU_STATE
GetApState (
IN CPU_AP_DATA *CpuData
)
{
return CpuData->State;
}
/**
Set the Application Processors state.
@param[in] CpuData The pointer to CPU_AP_DATA of specified AP
@param[in] State The AP status
**/
VOID
SetApState (
IN CPU_AP_DATA *CpuData,
IN CPU_STATE State
)
{
AcquireSpinLock (&CpuData->ApLock);
CpuData->State = State;
ReleaseSpinLock (&CpuData->ApLock);
}
/**
Save the volatile registers required to be restored following INIT IPI.
@param[out] VolatileRegisters Returns buffer saved the volatile resisters
**/
VOID
SaveVolatileRegisters (
OUT CPU_VOLATILE_REGISTERS *VolatileRegisters
)
{
CPUID_VERSION_INFO_EDX VersionInfoEdx;
VolatileRegisters->Cr0 = AsmReadCr0 ();
VolatileRegisters->Cr3 = AsmReadCr3 ();
VolatileRegisters->Cr4 = AsmReadCr4 ();
AsmCpuid (CPUID_VERSION_INFO, NULL, NULL, NULL, &VersionInfoEdx.Uint32);
if (VersionInfoEdx.Bits.DE != 0) {
//
// If processor supports Debugging Extensions feature
// by CPUID.[EAX=01H]:EDX.BIT2
//
VolatileRegisters->Dr0 = AsmReadDr0 ();
VolatileRegisters->Dr1 = AsmReadDr1 ();
VolatileRegisters->Dr2 = AsmReadDr2 ();
VolatileRegisters->Dr3 = AsmReadDr3 ();
VolatileRegisters->Dr6 = AsmReadDr6 ();
VolatileRegisters->Dr7 = AsmReadDr7 ();
}
}
/**
Restore the volatile registers following INIT IPI.
@param[in] VolatileRegisters Pointer to volatile resisters
@param[in] IsRestoreDr TRUE: Restore DRx if supported
FALSE: Do not restore DRx
**/
VOID
RestoreVolatileRegisters (
IN CPU_VOLATILE_REGISTERS *VolatileRegisters,
IN BOOLEAN IsRestoreDr
)
{
CPUID_VERSION_INFO_EDX VersionInfoEdx;
AsmWriteCr0 (VolatileRegisters->Cr0);
AsmWriteCr3 (VolatileRegisters->Cr3);
AsmWriteCr4 (VolatileRegisters->Cr4);
if (IsRestoreDr) {
AsmCpuid (CPUID_VERSION_INFO, NULL, NULL, NULL, &VersionInfoEdx.Uint32);
if (VersionInfoEdx.Bits.DE != 0) {
//
// If processor supports Debugging Extensions feature
// by CPUID.[EAX=01H]:EDX.BIT2
//
AsmWriteDr0 (VolatileRegisters->Dr0);
AsmWriteDr1 (VolatileRegisters->Dr1);
AsmWriteDr2 (VolatileRegisters->Dr2);
AsmWriteDr3 (VolatileRegisters->Dr3);
AsmWriteDr6 (VolatileRegisters->Dr6);
AsmWriteDr7 (VolatileRegisters->Dr7);
}
}
}
/**
Detect whether Mwait-monitor feature is supported.
@retval TRUE Mwait-monitor feature is supported.
@retval FALSE Mwait-monitor feature is not supported.
**/
BOOLEAN
IsMwaitSupport (
VOID
)
{
CPUID_VERSION_INFO_ECX VersionInfoEcx;
AsmCpuid (CPUID_VERSION_INFO, NULL, NULL, &VersionInfoEcx.Uint32, NULL);
return (VersionInfoEcx.Bits.MONITOR == 1) ? TRUE : FALSE;
}
/**
Get AP loop mode.
@param[out] MonitorFilterSize Returns the largest monitor-line size in bytes.
@return The AP loop mode.
**/
UINT8
GetApLoopMode (
OUT UINT32 *MonitorFilterSize
)
{
UINT8 ApLoopMode;
CPUID_MONITOR_MWAIT_EBX MonitorMwaitEbx;
ASSERT (MonitorFilterSize != NULL);
ApLoopMode = PcdGet8 (PcdCpuApLoopMode);
ASSERT (ApLoopMode >= ApInHltLoop && ApLoopMode <= ApInRunLoop);
if (ApLoopMode == ApInMwaitLoop) {
if (!IsMwaitSupport ()) {
//
// If processor does not support MONITOR/MWAIT feature,
// force AP in Hlt-loop mode
//
ApLoopMode = ApInHltLoop;
}
}
if (ApLoopMode != ApInMwaitLoop) {
*MonitorFilterSize = sizeof (UINT32);
} else {
//
// CPUID.[EAX=05H]:EBX.BIT0-15: Largest monitor-line size in bytes
// CPUID.[EAX=05H].EDX: C-states supported using MWAIT
//
AsmCpuid (CPUID_MONITOR_MWAIT, NULL, &MonitorMwaitEbx.Uint32, NULL, NULL);
*MonitorFilterSize = MonitorMwaitEbx.Bits.LargestMonitorLineSize;
}
return ApLoopMode;
}
/**
Sort the APIC ID of all processors.
This function sorts the APIC ID of all processors so that processor number is
assigned in the ascending order of APIC ID which eases MP debugging.
@param[in] CpuMpData Pointer to PEI CPU MP Data
**/
VOID
SortApicId (
IN CPU_MP_DATA *CpuMpData
)
{
UINTN Index1;
UINTN Index2;
UINTN Index3;
UINT32 ApicId;
CPU_INFO_IN_HOB CpuInfo;
UINT32 ApCount;
CPU_INFO_IN_HOB *CpuInfoInHob;
ApCount = CpuMpData->CpuCount - 1;
CpuInfoInHob = (CPU_INFO_IN_HOB *) (UINTN) CpuMpData->CpuInfoInHob;
if (ApCount != 0) {
for (Index1 = 0; Index1 < ApCount; Index1++) {
Index3 = Index1;
//
// Sort key is the hardware default APIC ID
//
ApicId = CpuInfoInHob[Index1].ApicId;
for (Index2 = Index1 + 1; Index2 <= ApCount; Index2++) {
if (ApicId > CpuInfoInHob[Index2].ApicId) {
Index3 = Index2;
ApicId = CpuInfoInHob[Index2].ApicId;
}
}
if (Index3 != Index1) {
CopyMem (&CpuInfo, &CpuInfoInHob[Index3], sizeof (CPU_INFO_IN_HOB));
CopyMem (
&CpuInfoInHob[Index3],
&CpuInfoInHob[Index1],
sizeof (CPU_INFO_IN_HOB)
);
CopyMem (&CpuInfoInHob[Index1], &CpuInfo, sizeof (CPU_INFO_IN_HOB));
}
}
//
// Get the processor number for the BSP
//
ApicId = GetInitialApicId ();
for (Index1 = 0; Index1 < CpuMpData->CpuCount; Index1++) {
if (CpuInfoInHob[Index1].ApicId == ApicId) {
CpuMpData->BspNumber = (UINT32) Index1;
break;
}
}
}
}
/**
Enable x2APIC mode on APs.
@param[in, out] Buffer Pointer to private data buffer.
**/
VOID
EFIAPI
ApFuncEnableX2Apic (
IN OUT VOID *Buffer
)
{
SetApicMode (LOCAL_APIC_MODE_X2APIC);
}
/**
Do sync on APs.
@param[in, out] Buffer Pointer to private data buffer.
**/
VOID
EFIAPI
ApInitializeSync (
IN OUT VOID *Buffer
)
{
CPU_MP_DATA *CpuMpData;
CpuMpData = (CPU_MP_DATA *) Buffer;
//
// Sync BSP's MTRR table to AP
//
MtrrSetAllMtrrs (&CpuMpData->MtrrTable);
//
// Load microcode on AP
//
MicrocodeDetect (CpuMpData);
}
/**
Find the current Processor number by APIC ID.
@param[in] CpuMpData Pointer to PEI CPU MP Data
@param[in] ProcessorNumber Return the pocessor number found
@retval EFI_SUCCESS ProcessorNumber is found and returned.
@retval EFI_NOT_FOUND ProcessorNumber is not found.
**/
EFI_STATUS
GetProcessorNumber (
IN CPU_MP_DATA *CpuMpData,
OUT UINTN *ProcessorNumber
)
{
UINTN TotalProcessorNumber;
UINTN Index;
CPU_INFO_IN_HOB *CpuInfoInHob;
CpuInfoInHob = (CPU_INFO_IN_HOB *) (UINTN) CpuMpData->CpuInfoInHob;
TotalProcessorNumber = CpuMpData->CpuCount;
for (Index = 0; Index < TotalProcessorNumber; Index ++) {
if (CpuInfoInHob[Index].ApicId == GetApicId ()) {
*ProcessorNumber = Index;
return EFI_SUCCESS;
}
}
return EFI_NOT_FOUND;
}
/**
This function will get CPU count in the system.
@param[in] CpuMpData Pointer to PEI CPU MP Data
@return CPU count detected
**/
UINTN
CollectProcessorCount (
IN CPU_MP_DATA *CpuMpData
)
{
//
// Send 1st broadcast IPI to APs to wakeup APs
//
CpuMpData->InitFlag = ApInitConfig;
CpuMpData->X2ApicEnable = FALSE;
WakeUpAP (CpuMpData, TRUE, 0, NULL, NULL);
CpuMpData->InitFlag = ApInitDone;
ASSERT (CpuMpData->CpuCount <= PcdGet32 (PcdCpuMaxLogicalProcessorNumber));
//
// Wait for all APs finished the initialization
//
while (CpuMpData->FinishedCount < (CpuMpData->CpuCount - 1)) {
CpuPause ();
}
if (CpuMpData->X2ApicEnable) {
DEBUG ((DEBUG_INFO, "Force x2APIC mode!\n"));
//
// Wakeup all APs to enable x2APIC mode
//
WakeUpAP (CpuMpData, TRUE, 0, ApFuncEnableX2Apic, NULL);
//
// Wait for all known APs finished
//
while (CpuMpData->FinishedCount < (CpuMpData->CpuCount - 1)) {
CpuPause ();
}
//
// Enable x2APIC on BSP
//
SetApicMode (LOCAL_APIC_MODE_X2APIC);
}
DEBUG ((DEBUG_INFO, "APIC MODE is %d\n", GetApicMode ()));
//
// Sort BSP/Aps by CPU APIC ID in ascending order
//
SortApicId (CpuMpData);
DEBUG ((DEBUG_INFO, "MpInitLib: Find %d processors in system.\n", CpuMpData->CpuCount));
return CpuMpData->CpuCount;
}
/*
Initialize CPU AP Data when AP is wakeup at the first time.
@param[in, out] CpuMpData Pointer to PEI CPU MP Data
@param[in] ProcessorNumber The handle number of processor
@param[in] BistData Processor BIST data
**/
VOID
InitializeApData (
IN OUT CPU_MP_DATA *CpuMpData,
IN UINTN ProcessorNumber,
IN UINT32 BistData,
IN UINT64 ApTopOfStack
)
{
CPU_INFO_IN_HOB *CpuInfoInHob;
CpuInfoInHob = (CPU_INFO_IN_HOB *) (UINTN) CpuMpData->CpuInfoInHob;
CpuInfoInHob[ProcessorNumber].InitialApicId = GetInitialApicId ();
CpuInfoInHob[ProcessorNumber].ApicId = GetApicId ();
CpuInfoInHob[ProcessorNumber].Health = BistData;
CpuInfoInHob[ProcessorNumber].ApTopOfStack = ApTopOfStack;
CpuMpData->CpuData[ProcessorNumber].Waiting = FALSE;
CpuMpData->CpuData[ProcessorNumber].CpuHealthy = (BistData == 0) ? TRUE : FALSE;
if (CpuInfoInHob[ProcessorNumber].InitialApicId >= 0xFF) {
//
// Set x2APIC mode if there are any logical processor reporting
// an Initial APIC ID of 255 or greater.
//
AcquireSpinLock(&CpuMpData->MpLock);
CpuMpData->X2ApicEnable = TRUE;
ReleaseSpinLock(&CpuMpData->MpLock);
}
InitializeSpinLock(&CpuMpData->CpuData[ProcessorNumber].ApLock);
SetApState (&CpuMpData->CpuData[ProcessorNumber], CpuStateIdle);
}
/**
This function will be called from AP reset code if BSP uses WakeUpAP.
@param[in] ExchangeInfo Pointer to the MP exchange info buffer
@param[in] NumApsExecuting Number of current executing AP
**/
VOID
EFIAPI
ApWakeupFunction (
IN MP_CPU_EXCHANGE_INFO *ExchangeInfo,
IN UINTN NumApsExecuting
)
{
CPU_MP_DATA *CpuMpData;
UINTN ProcessorNumber;
EFI_AP_PROCEDURE Procedure;
VOID *Parameter;
UINT32 BistData;
volatile UINT32 *ApStartupSignalBuffer;
CPU_INFO_IN_HOB *CpuInfoInHob;
UINT64 ApTopOfStack;
//
// AP finished assembly code and begin to execute C code
//
CpuMpData = ExchangeInfo->CpuMpData;
ProgramVirtualWireMode ();
while (TRUE) {
if (CpuMpData->InitFlag == ApInitConfig) {
//
// Add CPU number
//
InterlockedIncrement ((UINT32 *) &CpuMpData->CpuCount);
ProcessorNumber = NumApsExecuting;
//
// This is first time AP wakeup, get BIST information from AP stack
//
ApTopOfStack = CpuMpData->Buffer + (ProcessorNumber + 1) * CpuMpData->CpuApStackSize;
BistData = *(UINT32 *) ((UINTN) ApTopOfStack - sizeof (UINTN));
//
// Do some AP initialize sync
//
ApInitializeSync (CpuMpData);
//
// Sync BSP's Control registers to APs
//
RestoreVolatileRegisters (&CpuMpData->CpuData[0].VolatileRegisters, FALSE);
InitializeApData (CpuMpData, ProcessorNumber, BistData, ApTopOfStack);
ApStartupSignalBuffer = CpuMpData->CpuData[ProcessorNumber].StartupApSignal;
} else {
//
// Execute AP function if AP is ready
//
GetProcessorNumber (CpuMpData, &ProcessorNumber);
//
// Clear AP start-up signal when AP waken up
//
ApStartupSignalBuffer = CpuMpData->CpuData[ProcessorNumber].StartupApSignal;
InterlockedCompareExchange32 (
(UINT32 *) ApStartupSignalBuffer,
WAKEUP_AP_SIGNAL,
0
);
if (CpuMpData->ApLoopMode == ApInHltLoop) {
//
// Restore AP's volatile registers saved
//
RestoreVolatileRegisters (&CpuMpData->CpuData[ProcessorNumber].VolatileRegisters, TRUE);
}
if (GetApState (&CpuMpData->CpuData[ProcessorNumber]) == CpuStateReady) {
Procedure = (EFI_AP_PROCEDURE)CpuMpData->CpuData[ProcessorNumber].ApFunction;
Parameter = (VOID *) CpuMpData->CpuData[ProcessorNumber].ApFunctionArgument;
if (Procedure != NULL) {
SetApState (&CpuMpData->CpuData[ProcessorNumber], CpuStateBusy);
//
// Invoke AP function here
//
Procedure (Parameter);
CpuInfoInHob = (CPU_INFO_IN_HOB *) (UINTN) CpuMpData->CpuInfoInHob;
if (CpuMpData->SwitchBspFlag) {
//
// Re-get the processor number due to BSP/AP maybe exchange in AP function
//
GetProcessorNumber (CpuMpData, &ProcessorNumber);
CpuMpData->CpuData[ProcessorNumber].ApFunction = 0;
CpuMpData->CpuData[ProcessorNumber].ApFunctionArgument = 0;
ApStartupSignalBuffer = CpuMpData->CpuData[ProcessorNumber].StartupApSignal;
CpuInfoInHob[ProcessorNumber].ApTopOfStack = CpuInfoInHob[CpuMpData->NewBspNumber].ApTopOfStack;
} else {
//
// Re-get the CPU APICID and Initial APICID
//
CpuInfoInHob[ProcessorNumber].ApicId = GetApicId ();
CpuInfoInHob[ProcessorNumber].InitialApicId = GetInitialApicId ();
}
}
SetApState (&CpuMpData->CpuData[ProcessorNumber], CpuStateFinished);
}
}
//
// AP finished executing C code
//
InterlockedIncrement ((UINT32 *) &CpuMpData->FinishedCount);
//
// Place AP is specified loop mode
//
if (CpuMpData->ApLoopMode == ApInHltLoop) {
//
// Save AP volatile registers
//
SaveVolatileRegisters (&CpuMpData->CpuData[ProcessorNumber].VolatileRegisters);
//
// Place AP in HLT-loop
//
while (TRUE) {
DisableInterrupts ();
CpuSleep ();
CpuPause ();
}
}
while (TRUE) {
DisableInterrupts ();
if (CpuMpData->ApLoopMode == ApInMwaitLoop) {
//
// Place AP in MWAIT-loop
//
AsmMonitor ((UINTN) ApStartupSignalBuffer, 0, 0);
if (*ApStartupSignalBuffer != WAKEUP_AP_SIGNAL) {
//
// Check AP start-up signal again.
// If AP start-up signal is not set, place AP into
// the specified C-state
//
AsmMwait (CpuMpData->ApTargetCState << 4, 0);
}
} else if (CpuMpData->ApLoopMode == ApInRunLoop) {
//
// Place AP in Run-loop
//
CpuPause ();
} else {
ASSERT (FALSE);
}
//
// If AP start-up signal is written, AP is waken up
// otherwise place AP in loop again
//
if (*ApStartupSignalBuffer == WAKEUP_AP_SIGNAL) {
break;
}
}
}
}
/**
Wait for AP wakeup and write AP start-up signal till AP is waken up.
@param[in] ApStartupSignalBuffer Pointer to AP wakeup signal
**/
VOID
WaitApWakeup (
IN volatile UINT32 *ApStartupSignalBuffer
)
{
//
// If AP is waken up, StartupApSignal should be cleared.
// Otherwise, write StartupApSignal again till AP waken up.
//
while (InterlockedCompareExchange32 (
(UINT32 *) ApStartupSignalBuffer,
WAKEUP_AP_SIGNAL,
WAKEUP_AP_SIGNAL
) != 0) {
CpuPause ();
}
}
/**
This function will fill the exchange info structure.
@param[in] CpuMpData Pointer to CPU MP Data
**/
VOID
FillExchangeInfoData (
IN CPU_MP_DATA *CpuMpData
)
{
volatile MP_CPU_EXCHANGE_INFO *ExchangeInfo;
ExchangeInfo = CpuMpData->MpCpuExchangeInfo;
ExchangeInfo->Lock = 0;
ExchangeInfo->StackStart = CpuMpData->Buffer;
ExchangeInfo->StackSize = CpuMpData->CpuApStackSize;
ExchangeInfo->BufferStart = CpuMpData->WakeupBuffer;
ExchangeInfo->ModeOffset = CpuMpData->AddressMap.ModeEntryOffset;
ExchangeInfo->CodeSegment = AsmReadCs ();
ExchangeInfo->DataSegment = AsmReadDs ();
ExchangeInfo->Cr3 = AsmReadCr3 ();
ExchangeInfo->CFunction = (UINTN) ApWakeupFunction;
ExchangeInfo->NumApsExecuting = 0;
ExchangeInfo->InitFlag = (UINTN) CpuMpData->InitFlag;
ExchangeInfo->CpuInfo = (CPU_INFO_IN_HOB *) (UINTN) CpuMpData->CpuInfoInHob;
ExchangeInfo->CpuMpData = CpuMpData;
ExchangeInfo->EnableExecuteDisable = IsBspExecuteDisableEnabled ();
//
// Get the BSP's data of GDT and IDT
//
AsmReadGdtr ((IA32_DESCRIPTOR *) &ExchangeInfo->GdtrProfile);
AsmReadIdtr ((IA32_DESCRIPTOR *) &ExchangeInfo->IdtrProfile);
}
/**
This function will be called by BSP to wakeup AP.
@param[in] CpuMpData Pointer to CPU MP Data
@param[in] Broadcast TRUE: Send broadcast IPI to all APs
FALSE: Send IPI to AP by ApicId
@param[in] ProcessorNumber The handle number of specified processor
@param[in] Procedure The function to be invoked by AP
@param[in] ProcedureArgument The argument to be passed into AP function
**/
VOID
WakeUpAP (
IN CPU_MP_DATA *CpuMpData,
IN BOOLEAN Broadcast,
IN UINTN ProcessorNumber,
IN EFI_AP_PROCEDURE Procedure, OPTIONAL
IN VOID *ProcedureArgument OPTIONAL
)
{
volatile MP_CPU_EXCHANGE_INFO *ExchangeInfo;
UINTN Index;
CPU_AP_DATA *CpuData;
BOOLEAN ResetVectorRequired;
CPU_INFO_IN_HOB *CpuInfoInHob;
CpuMpData->FinishedCount = 0;
ResetVectorRequired = FALSE;
if (CpuMpData->ApLoopMode == ApInHltLoop ||
CpuMpData->InitFlag != ApInitDone) {
ResetVectorRequired = TRUE;
AllocateResetVector (CpuMpData);
FillExchangeInfoData (CpuMpData);
} else if (CpuMpData->ApLoopMode == ApInMwaitLoop) {
//
// Get AP target C-state each time when waking up AP,
// for it maybe updated by platform again
//
CpuMpData->ApTargetCState = PcdGet8 (PcdCpuApTargetCstate);
}
ExchangeInfo = CpuMpData->MpCpuExchangeInfo;
if (Broadcast) {
for (Index = 0; Index < CpuMpData->CpuCount; Index++) {
if (Index != CpuMpData->BspNumber) {
CpuData = &CpuMpData->CpuData[Index];
CpuData->ApFunction = (UINTN) Procedure;
CpuData->ApFunctionArgument = (UINTN) ProcedureArgument;
SetApState (CpuData, CpuStateReady);
if (CpuMpData->InitFlag != ApInitConfig) {
*(UINT32 *) CpuData->StartupApSignal = WAKEUP_AP_SIGNAL;
}
}
}
if (ResetVectorRequired) {
//
// Wakeup all APs
//
SendInitSipiSipiAllExcludingSelf ((UINT32) ExchangeInfo->BufferStart);
}
if (CpuMpData->InitFlag == ApInitConfig) {
//
// Wait for all potential APs waken up in one specified period
//
MicroSecondDelay (PcdGet32(PcdCpuApInitTimeOutInMicroSeconds));
} else {
//
// Wait all APs waken up if this is not the 1st broadcast of SIPI
//
for (Index = 0; Index < CpuMpData->CpuCount; Index++) {
CpuData = &CpuMpData->CpuData[Index];
if (Index != CpuMpData->BspNumber) {
WaitApWakeup (CpuData->StartupApSignal);
}
}
}
} else {
CpuData = &CpuMpData->CpuData[ProcessorNumber];
CpuData->ApFunction = (UINTN) Procedure;
CpuData->ApFunctionArgument = (UINTN) ProcedureArgument;
SetApState (CpuData, CpuStateReady);
//
// Wakeup specified AP
//
ASSERT (CpuMpData->InitFlag != ApInitConfig);
*(UINT32 *) CpuData->StartupApSignal = WAKEUP_AP_SIGNAL;
if (ResetVectorRequired) {
CpuInfoInHob = (CPU_INFO_IN_HOB *) (UINTN) CpuMpData->CpuInfoInHob;
SendInitSipiSipi (
CpuInfoInHob[ProcessorNumber].ApicId,
(UINT32) ExchangeInfo->BufferStart
);
}
//
// Wait specified AP waken up
//
WaitApWakeup (CpuData->StartupApSignal);
}
if (ResetVectorRequired) {
FreeResetVector (CpuMpData);
}
}
/**
Calculate timeout value and return the current performance counter value.
Calculate the number of performance counter ticks required for a timeout.
If TimeoutInMicroseconds is 0, return value is also 0, which is recognized
as infinity.
@param[in] TimeoutInMicroseconds Timeout value in microseconds.
@param[out] CurrentTime Returns the current value of the performance counter.
@return Expected time stamp counter for timeout.
If TimeoutInMicroseconds is 0, return value is also 0, which is recognized
as infinity.
**/
UINT64
CalculateTimeout (
IN UINTN TimeoutInMicroseconds,
OUT UINT64 *CurrentTime
)
{
//
// Read the current value of the performance counter
//
*CurrentTime = GetPerformanceCounter ();
//
// If TimeoutInMicroseconds is 0, return value is also 0, which is recognized
// as infinity.
//
if (TimeoutInMicroseconds == 0) {
return 0;
}
//
// GetPerformanceCounterProperties () returns the timestamp counter's frequency
// in Hz. So multiply the return value with TimeoutInMicroseconds and then divide
// it by 1,000,000, to get the number of ticks for the timeout value.
//
return DivU64x32 (
MultU64x64 (
GetPerformanceCounterProperties (NULL, NULL),
TimeoutInMicroseconds
),
1000000
);
}
/**
Checks whether timeout expires.
Check whether the number of elapsed performance counter ticks required for
a timeout condition has been reached.
If Timeout is zero, which means infinity, return value is always FALSE.
@param[in, out] PreviousTime On input, the value of the performance counter
when it was last read.
On output, the current value of the performance
counter
@param[in] TotalTime The total amount of elapsed time in performance
counter ticks.
@param[in] Timeout The number of performance counter ticks required
to reach a timeout condition.
@retval TRUE A timeout condition has been reached.
@retval FALSE A timeout condition has not been reached.
**/
BOOLEAN
CheckTimeout (
IN OUT UINT64 *PreviousTime,
IN UINT64 *TotalTime,
IN UINT64 Timeout
)
{
UINT64 Start;
UINT64 End;
UINT64 CurrentTime;
INT64 Delta;
INT64 Cycle;
if (Timeout == 0) {
return FALSE;
}
GetPerformanceCounterProperties (&Start, &End);
Cycle = End - Start;
if (Cycle < 0) {
Cycle = -Cycle;
}
Cycle++;
CurrentTime = GetPerformanceCounter();
Delta = (INT64) (CurrentTime - *PreviousTime);
if (Start > End) {
Delta = -Delta;
}
if (Delta < 0) {
Delta += Cycle;
}
*TotalTime += Delta;
*PreviousTime = CurrentTime;
if (*TotalTime > Timeout) {
return TRUE;
}
return FALSE;
}
/**
Reset an AP to Idle state.
Any task being executed by the AP will be aborted and the AP
will be waiting for a new task in Wait-For-SIPI state.
@param[in] ProcessorNumber The handle number of processor.
**/
VOID
ResetProcessorToIdleState (
IN UINTN ProcessorNumber
)
{
CPU_MP_DATA *CpuMpData;
CpuMpData = GetCpuMpData ();
CpuMpData->InitFlag = ApInitReconfig;
WakeUpAP (CpuMpData, FALSE, ProcessorNumber, NULL, NULL);
while (CpuMpData->FinishedCount < 1) {
CpuPause ();
}
CpuMpData->InitFlag = ApInitDone;
SetApState (&CpuMpData->CpuData[ProcessorNumber], CpuStateIdle);
}
/**
Searches for the next waiting AP.
Search for the next AP that is put in waiting state by single-threaded StartupAllAPs().
@param[out] NextProcessorNumber Pointer to the processor number of the next waiting AP.
@retval EFI_SUCCESS The next waiting AP has been found.
@retval EFI_NOT_FOUND No waiting AP exists.
**/
EFI_STATUS
GetNextWaitingProcessorNumber (
OUT UINTN *NextProcessorNumber
)
{
UINTN ProcessorNumber;
CPU_MP_DATA *CpuMpData;
CpuMpData = GetCpuMpData ();
for (ProcessorNumber = 0; ProcessorNumber < CpuMpData->CpuCount; ProcessorNumber++) {
if (CpuMpData->CpuData[ProcessorNumber].Waiting) {
*NextProcessorNumber = ProcessorNumber;
return EFI_SUCCESS;
}
}
return EFI_NOT_FOUND;
}
/** Checks status of specified AP.
This function checks whether the specified AP has finished the task assigned
by StartupThisAP(), and whether timeout expires.
@param[in] ProcessorNumber The handle number of processor.
@retval EFI_SUCCESS Specified AP has finished task assigned by StartupThisAPs().
@retval EFI_TIMEOUT The timeout expires.
@retval EFI_NOT_READY Specified AP has not finished task and timeout has not expired.
**/
EFI_STATUS
CheckThisAP (
IN UINTN ProcessorNumber
)
{
CPU_MP_DATA *CpuMpData;
CPU_AP_DATA *CpuData;
CpuMpData = GetCpuMpData ();
CpuData = &CpuMpData->CpuData[ProcessorNumber];
//
// Check the CPU state of AP. If it is CpuStateFinished, then the AP has finished its task.
// Only BSP and corresponding AP access this unit of CPU Data. This means the AP will not modify the
// value of state after setting the it to CpuStateFinished, so BSP can safely make use of its value.
//
//
// If the AP finishes for StartupThisAP(), return EFI_SUCCESS.
//
if (GetApState(CpuData) == CpuStateFinished) {
if (CpuData->Finished != NULL) {
*(CpuData->Finished) = TRUE;
}
SetApState (CpuData, CpuStateIdle);
return EFI_SUCCESS;
} else {
//
// If timeout expires for StartupThisAP(), report timeout.
//
if (CheckTimeout (&CpuData->CurrentTime, &CpuData->TotalTime, CpuData->ExpectedTime)) {
if (CpuData->Finished != NULL) {
*(CpuData->Finished) = FALSE;
}
//
// Reset failed AP to idle state
//
ResetProcessorToIdleState (ProcessorNumber);
return EFI_TIMEOUT;
}
}
return EFI_NOT_READY;
}
/**
Checks status of all APs.
This function checks whether all APs have finished task assigned by StartupAllAPs(),
and whether timeout expires.
@retval EFI_SUCCESS All APs have finished task assigned by StartupAllAPs().
@retval EFI_TIMEOUT The timeout expires.
@retval EFI_NOT_READY APs have not finished task and timeout has not expired.
**/
EFI_STATUS
CheckAllAPs (
VOID
)
{
UINTN ProcessorNumber;
UINTN NextProcessorNumber;
UINTN ListIndex;
EFI_STATUS Status;
CPU_MP_DATA *CpuMpData;
CPU_AP_DATA *CpuData;
CpuMpData = GetCpuMpData ();
NextProcessorNumber = 0;
//
// Go through all APs that are responsible for the StartupAllAPs().
//
for (ProcessorNumber = 0; ProcessorNumber < CpuMpData->CpuCount; ProcessorNumber++) {
if (!CpuMpData->CpuData[ProcessorNumber].Waiting) {
continue;
}
CpuData = &CpuMpData->CpuData[ProcessorNumber];
//
// Check the CPU state of AP. If it is CpuStateFinished, then the AP has finished its task.
// Only BSP and corresponding AP access this unit of CPU Data. This means the AP will not modify the
// value of state after setting the it to CpuStateFinished, so BSP can safely make use of its value.
//
if (GetApState(CpuData) == CpuStateFinished) {
CpuMpData->RunningCount ++;
CpuMpData->CpuData[ProcessorNumber].Waiting = FALSE;
SetApState(CpuData, CpuStateIdle);
//
// If in Single Thread mode, then search for the next waiting AP for execution.
//
if (CpuMpData->SingleThread) {
Status = GetNextWaitingProcessorNumber (&NextProcessorNumber);
if (!EFI_ERROR (Status)) {
WakeUpAP (
CpuMpData,
FALSE,
(UINT32) NextProcessorNumber,
CpuMpData->Procedure,
CpuMpData->ProcArguments
);
}
}
}
}
//
// If all APs finish, return EFI_SUCCESS.
//
if (CpuMpData->RunningCount == CpuMpData->StartCount) {
return EFI_SUCCESS;
}
//
// If timeout expires, report timeout.
//
if (CheckTimeout (
&CpuMpData->CurrentTime,
&CpuMpData->TotalTime,
CpuMpData->ExpectedTime)
) {
//
// If FailedCpuList is not NULL, record all failed APs in it.
//
if (CpuMpData->FailedCpuList != NULL) {
*CpuMpData->FailedCpuList =
AllocatePool ((CpuMpData->StartCount - CpuMpData->FinishedCount + 1) * sizeof (UINTN));
ASSERT (*CpuMpData->FailedCpuList != NULL);
}
ListIndex = 0;
for (ProcessorNumber = 0; ProcessorNumber < CpuMpData->CpuCount; ProcessorNumber++) {
//
// Check whether this processor is responsible for StartupAllAPs().
//
if (CpuMpData->CpuData[ProcessorNumber].Waiting) {
//
// Reset failed APs to idle state
//
ResetProcessorToIdleState (ProcessorNumber);
CpuMpData->CpuData[ProcessorNumber].Waiting = FALSE;
if (CpuMpData->FailedCpuList != NULL) {
(*CpuMpData->FailedCpuList)[ListIndex++] = ProcessorNumber;
}
}
}
if (CpuMpData->FailedCpuList != NULL) {
(*CpuMpData->FailedCpuList)[ListIndex] = END_OF_CPU_LIST;
}
return EFI_TIMEOUT;
}
return EFI_NOT_READY;
}
/**
MP Initialize Library initialization.
This service will allocate AP reset vector and wakeup all APs to do APs
initialization.
This service must be invoked before all other MP Initialize Library
service are invoked.
@retval EFI_SUCCESS MP initialization succeeds.
@retval Others MP initialization fails.
**/
EFI_STATUS
EFIAPI
MpInitLibInitialize (
VOID
)
{
CPU_MP_DATA *OldCpuMpData;
CPU_INFO_IN_HOB *CpuInfoInHob;
UINT32 MaxLogicalProcessorNumber;
UINT32 ApStackSize;
MP_ASSEMBLY_ADDRESS_MAP AddressMap;
UINTN BufferSize;
UINT32 MonitorFilterSize;
VOID *MpBuffer;
UINTN Buffer;
CPU_MP_DATA *CpuMpData;
UINT8 ApLoopMode;
UINT8 *MonitorBuffer;
UINTN Index;
UINTN ApResetVectorSize;
UINTN BackupBufferAddr;
OldCpuMpData = GetCpuMpDataFromGuidedHob ();
if (OldCpuMpData == NULL) {
MaxLogicalProcessorNumber = PcdGet32(PcdCpuMaxLogicalProcessorNumber);
} else {
MaxLogicalProcessorNumber = OldCpuMpData->CpuCount;
}
ASSERT (MaxLogicalProcessorNumber != 0);
AsmGetAddressMap (&AddressMap);
ApResetVectorSize = AddressMap.RendezvousFunnelSize + sizeof (MP_CPU_EXCHANGE_INFO);
ApStackSize = PcdGet32(PcdCpuApStackSize);
ApLoopMode = GetApLoopMode (&MonitorFilterSize);
BufferSize = ApStackSize * MaxLogicalProcessorNumber;
BufferSize += MonitorFilterSize * MaxLogicalProcessorNumber;
BufferSize += sizeof (CPU_MP_DATA);
BufferSize += ApResetVectorSize;
BufferSize += (sizeof (CPU_AP_DATA) + sizeof (CPU_INFO_IN_HOB))* MaxLogicalProcessorNumber;
MpBuffer = AllocatePages (EFI_SIZE_TO_PAGES (BufferSize));
ASSERT (MpBuffer != NULL);
ZeroMem (MpBuffer, BufferSize);
Buffer = (UINTN) MpBuffer;
MonitorBuffer = (UINT8 *) (Buffer + ApStackSize * MaxLogicalProcessorNumber);
BackupBufferAddr = (UINTN) MonitorBuffer + MonitorFilterSize * MaxLogicalProcessorNumber;
CpuMpData = (CPU_MP_DATA *) (BackupBufferAddr + ApResetVectorSize);
CpuMpData->Buffer = Buffer;
CpuMpData->CpuApStackSize = ApStackSize;
CpuMpData->BackupBuffer = BackupBufferAddr;
CpuMpData->BackupBufferSize = ApResetVectorSize;
CpuMpData->SaveRestoreFlag = FALSE;
CpuMpData->WakeupBuffer = (UINTN) -1;
CpuMpData->CpuCount = 1;
CpuMpData->BspNumber = 0;
CpuMpData->WaitEvent = NULL;
CpuMpData->SwitchBspFlag = FALSE;
CpuMpData->CpuData = (CPU_AP_DATA *) (CpuMpData + 1);
CpuMpData->CpuInfoInHob = (UINT64) (UINTN) (CpuMpData->CpuData + MaxLogicalProcessorNumber);
InitializeSpinLock(&CpuMpData->MpLock);
//
// Save BSP's Control registers to APs
//
SaveVolatileRegisters (&CpuMpData->CpuData[0].VolatileRegisters);
//
// Set BSP basic information
//
InitializeApData (CpuMpData, 0, 0, CpuMpData->Buffer);
//
// Save assembly code information
//
CopyMem (&CpuMpData->AddressMap, &AddressMap, sizeof (MP_ASSEMBLY_ADDRESS_MAP));
//
// Finally set AP loop mode
//
CpuMpData->ApLoopMode = ApLoopMode;
DEBUG ((DEBUG_INFO, "AP Loop Mode is %d\n", CpuMpData->ApLoopMode));
//
// Set up APs wakeup signal buffer
//
for (Index = 0; Index < MaxLogicalProcessorNumber; Index++) {
CpuMpData->CpuData[Index].StartupApSignal =
(UINT32 *)(MonitorBuffer + MonitorFilterSize * Index);
}
//
// Load Microcode on BSP
//
MicrocodeDetect (CpuMpData);
//
// Store BSP's MTRR setting
//
MtrrGetAllMtrrs (&CpuMpData->MtrrTable);
if (OldCpuMpData == NULL) {
if (MaxLogicalProcessorNumber > 1) {
//
// Wakeup all APs and calculate the processor count in system
//
CollectProcessorCount (CpuMpData);
}
} else {
//
// APs have been wakeup before, just get the CPU Information
// from HOB
//
CpuMpData->CpuCount = OldCpuMpData->CpuCount;
CpuMpData->BspNumber = OldCpuMpData->BspNumber;
CpuMpData->InitFlag = ApInitReconfig;
CpuMpData->CpuInfoInHob = OldCpuMpData->CpuInfoInHob;
CpuInfoInHob = (CPU_INFO_IN_HOB *) (UINTN) CpuMpData->CpuInfoInHob;
for (Index = 0; Index < CpuMpData->CpuCount; Index++) {
InitializeSpinLock(&CpuMpData->CpuData[Index].ApLock);
if (CpuInfoInHob[Index].InitialApicId >= 255) {
CpuMpData->X2ApicEnable = TRUE;
}
CpuMpData->CpuData[Index].CpuHealthy = (CpuInfoInHob[Index].Health == 0)? TRUE:FALSE;
CpuMpData->CpuData[Index].ApFunction = 0;
CopyMem (
&CpuMpData->CpuData[Index].VolatileRegisters,
&CpuMpData->CpuData[0].VolatileRegisters,
sizeof (CPU_VOLATILE_REGISTERS)
);
}
if (MaxLogicalProcessorNumber > 1) {
//
// Wakeup APs to do some AP initialize sync
//
WakeUpAP (CpuMpData, TRUE, 0, ApInitializeSync, CpuMpData);
//
// Wait for all APs finished initialization
//
while (CpuMpData->FinishedCount < (CpuMpData->CpuCount - 1)) {
CpuPause ();
}
CpuMpData->InitFlag = ApInitDone;
for (Index = 0; Index < CpuMpData->CpuCount; Index++) {
SetApState (&CpuMpData->CpuData[Index], CpuStateIdle);
}
}
}
//
// Initialize global data for MP support
//
InitMpGlobalData (CpuMpData);
return EFI_SUCCESS;
}
/**
Gets detailed MP-related information on the requested processor at the
instant this call is made. This service may only be called from the BSP.
@param[in] ProcessorNumber The handle number of processor.
@param[out] ProcessorInfoBuffer A pointer to the buffer where information for
the requested processor is deposited.
@param[out] HealthData Return processor health data.
@retval EFI_SUCCESS Processor information was returned.
@retval EFI_DEVICE_ERROR The calling processor is an AP.
@retval EFI_INVALID_PARAMETER ProcessorInfoBuffer is NULL.
@retval EFI_NOT_FOUND The processor with the handle specified by
ProcessorNumber does not exist in the platform.
@retval EFI_NOT_READY MP Initialize Library is not initialized.
**/
EFI_STATUS
EFIAPI
MpInitLibGetProcessorInfo (
IN UINTN ProcessorNumber,
OUT EFI_PROCESSOR_INFORMATION *ProcessorInfoBuffer,
OUT EFI_HEALTH_FLAGS *HealthData OPTIONAL
)
{
CPU_MP_DATA *CpuMpData;
UINTN CallerNumber;
CPU_INFO_IN_HOB *CpuInfoInHob;
CpuMpData = GetCpuMpData ();
CpuInfoInHob = (CPU_INFO_IN_HOB *) (UINTN) CpuMpData->CpuInfoInHob;
//
// Check whether caller processor is BSP
//
MpInitLibWhoAmI (&CallerNumber);
if (CallerNumber != CpuMpData->BspNumber) {
return EFI_DEVICE_ERROR;
}
if (ProcessorInfoBuffer == NULL) {
return EFI_INVALID_PARAMETER;
}
if (ProcessorNumber >= CpuMpData->CpuCount) {
return EFI_NOT_FOUND;
}
ProcessorInfoBuffer->ProcessorId = (UINT64) CpuInfoInHob[ProcessorNumber].ApicId;
ProcessorInfoBuffer->StatusFlag = 0;
if (ProcessorNumber == CpuMpData->BspNumber) {
ProcessorInfoBuffer->StatusFlag |= PROCESSOR_AS_BSP_BIT;
}
if (CpuMpData->CpuData[ProcessorNumber].CpuHealthy) {
ProcessorInfoBuffer->StatusFlag |= PROCESSOR_HEALTH_STATUS_BIT;
}
if (GetApState (&CpuMpData->CpuData[ProcessorNumber]) == CpuStateDisabled) {
ProcessorInfoBuffer->StatusFlag &= ~PROCESSOR_ENABLED_BIT;
} else {
ProcessorInfoBuffer->StatusFlag |= PROCESSOR_ENABLED_BIT;
}
//
// Get processor location information
//
GetProcessorLocationByApicId (
CpuInfoInHob[ProcessorNumber].ApicId,
&ProcessorInfoBuffer->Location.Package,
&ProcessorInfoBuffer->Location.Core,
&ProcessorInfoBuffer->Location.Thread
);
if (HealthData != NULL) {
HealthData->Uint32 = CpuInfoInHob[ProcessorNumber].Health;
}
return EFI_SUCCESS;
}
/**
Worker function to switch the requested AP to be the BSP from that point onward.
@param[in] ProcessorNumber The handle number of AP that is to become the new BSP.
@param[in] EnableOldBSP If TRUE, then the old BSP will be listed as an
enabled AP. Otherwise, it will be disabled.
@retval EFI_SUCCESS BSP successfully switched.
@retval others Failed to switch BSP.
**/
EFI_STATUS
SwitchBSPWorker (
IN UINTN ProcessorNumber,
IN BOOLEAN EnableOldBSP
)
{
CPU_MP_DATA *CpuMpData;
UINTN CallerNumber;
CPU_STATE State;
MSR_IA32_APIC_BASE_REGISTER ApicBaseMsr;
CpuMpData = GetCpuMpData ();
//
// Check whether caller processor is BSP
//
MpInitLibWhoAmI (&CallerNumber);
if (CallerNumber != CpuMpData->BspNumber) {
return EFI_SUCCESS;
}
if (ProcessorNumber >= CpuMpData->CpuCount) {
return EFI_NOT_FOUND;
}
//
// Check whether specified AP is disabled
//
State = GetApState (&CpuMpData->CpuData[ProcessorNumber]);
if (State == CpuStateDisabled) {
return EFI_INVALID_PARAMETER;
}
//
// Check whether ProcessorNumber specifies the current BSP
//
if (ProcessorNumber == CpuMpData->BspNumber) {
return EFI_INVALID_PARAMETER;
}
//
// Check whether specified AP is busy
//
if (State == CpuStateBusy) {
return EFI_NOT_READY;
}
CpuMpData->BSPInfo.State = CPU_SWITCH_STATE_IDLE;
CpuMpData->APInfo.State = CPU_SWITCH_STATE_IDLE;
CpuMpData->SwitchBspFlag = TRUE;
CpuMpData->NewBspNumber = ProcessorNumber;
//
// Clear the BSP bit of MSR_IA32_APIC_BASE
//
ApicBaseMsr.Uint64 = AsmReadMsr64 (MSR_IA32_APIC_BASE);
ApicBaseMsr.Bits.BSP = 0;
AsmWriteMsr64 (MSR_IA32_APIC_BASE, ApicBaseMsr.Uint64);
//
// Need to wakeUp AP (future BSP).
//
WakeUpAP (CpuMpData, FALSE, ProcessorNumber, FutureBSPProc, CpuMpData);
AsmExchangeRole (&CpuMpData->BSPInfo, &CpuMpData->APInfo);
//
// Set the BSP bit of MSR_IA32_APIC_BASE on new BSP
//
ApicBaseMsr.Uint64 = AsmReadMsr64 (MSR_IA32_APIC_BASE);
ApicBaseMsr.Bits.BSP = 1;
AsmWriteMsr64 (MSR_IA32_APIC_BASE, ApicBaseMsr.Uint64);
//
// Wait for old BSP finished AP task
//
while (GetApState (&CpuMpData->CpuData[CallerNumber]) != CpuStateFinished) {
CpuPause ();
}
CpuMpData->SwitchBspFlag = FALSE;
//
// Set old BSP enable state
//
if (!EnableOldBSP) {
SetApState (&CpuMpData->CpuData[CallerNumber], CpuStateDisabled);
}
//
// Save new BSP number
//
CpuMpData->BspNumber = (UINT32) ProcessorNumber;
return EFI_SUCCESS;
}
/**
Worker function to let the caller enable or disable an AP from this point onward.
This service may only be called from the BSP.
@param[in] ProcessorNumber The handle number of AP.
@param[in] EnableAP Specifies the new state for the processor for
enabled, FALSE for disabled.
@param[in] HealthFlag If not NULL, a pointer to a value that specifies
the new health status of the AP.
@retval EFI_SUCCESS The specified AP was enabled or disabled successfully.
@retval others Failed to Enable/Disable AP.
**/
EFI_STATUS
EnableDisableApWorker (
IN UINTN ProcessorNumber,
IN BOOLEAN EnableAP,
IN UINT32 *HealthFlag OPTIONAL
)
{
CPU_MP_DATA *CpuMpData;
UINTN CallerNumber;
CpuMpData = GetCpuMpData ();
//
// Check whether caller processor is BSP
//
MpInitLibWhoAmI (&CallerNumber);
if (CallerNumber != CpuMpData->BspNumber) {
return EFI_DEVICE_ERROR;
}
if (ProcessorNumber == CpuMpData->BspNumber) {
return EFI_INVALID_PARAMETER;
}
if (ProcessorNumber >= CpuMpData->CpuCount) {
return EFI_NOT_FOUND;
}
if (!EnableAP) {
SetApState (&CpuMpData->CpuData[ProcessorNumber], CpuStateDisabled);
} else {
SetApState (&CpuMpData->CpuData[ProcessorNumber], CpuStateIdle);
}
if (HealthFlag != NULL) {
CpuMpData->CpuData[ProcessorNumber].CpuHealthy =
(BOOLEAN) ((*HealthFlag & PROCESSOR_HEALTH_STATUS_BIT) != 0);
}
return EFI_SUCCESS;
}
/**
This return the handle number for the calling processor. This service may be
called from the BSP and APs.
@param[out] ProcessorNumber Pointer to the handle number of AP.
The range is from 0 to the total number of
logical processors minus 1. The total number of
logical processors can be retrieved by
MpInitLibGetNumberOfProcessors().
@retval EFI_SUCCESS The current processor handle number was returned
in ProcessorNumber.
@retval EFI_INVALID_PARAMETER ProcessorNumber is NULL.
@retval EFI_NOT_READY MP Initialize Library is not initialized.
**/
EFI_STATUS
EFIAPI
MpInitLibWhoAmI (
OUT UINTN *ProcessorNumber
)
{
CPU_MP_DATA *CpuMpData;
if (ProcessorNumber == NULL) {
return EFI_INVALID_PARAMETER;
}
CpuMpData = GetCpuMpData ();
return GetProcessorNumber (CpuMpData, ProcessorNumber);
}
/**
Retrieves the number of logical processor in the platform and the number of
those logical processors that are enabled on this boot. This service may only
be called from the BSP.
@param[out] NumberOfProcessors Pointer to the total number of logical
processors in the system, including the BSP
and disabled APs.
@param[out] NumberOfEnabledProcessors Pointer to the number of enabled logical
processors that exist in system, including
the BSP.
@retval EFI_SUCCESS The number of logical processors and enabled
logical processors was retrieved.
@retval EFI_DEVICE_ERROR The calling processor is an AP.
@retval EFI_INVALID_PARAMETER NumberOfProcessors is NULL and NumberOfEnabledProcessors
is NULL.
@retval EFI_NOT_READY MP Initialize Library is not initialized.
**/
EFI_STATUS
EFIAPI
MpInitLibGetNumberOfProcessors (
OUT UINTN *NumberOfProcessors, OPTIONAL
OUT UINTN *NumberOfEnabledProcessors OPTIONAL
)
{
CPU_MP_DATA *CpuMpData;
UINTN CallerNumber;
UINTN ProcessorNumber;
UINTN EnabledProcessorNumber;
UINTN Index;
CpuMpData = GetCpuMpData ();
if ((NumberOfProcessors == NULL) && (NumberOfEnabledProcessors == NULL)) {
return EFI_INVALID_PARAMETER;
}
//
// Check whether caller processor is BSP
//
MpInitLibWhoAmI (&CallerNumber);
if (CallerNumber != CpuMpData->BspNumber) {
return EFI_DEVICE_ERROR;
}
ProcessorNumber = CpuMpData->CpuCount;
EnabledProcessorNumber = 0;
for (Index = 0; Index < ProcessorNumber; Index++) {
if (GetApState (&CpuMpData->CpuData[Index]) != CpuStateDisabled) {
EnabledProcessorNumber ++;
}
}
if (NumberOfProcessors != NULL) {
*NumberOfProcessors = ProcessorNumber;
}
if (NumberOfEnabledProcessors != NULL) {
*NumberOfEnabledProcessors = EnabledProcessorNumber;
}
return EFI_SUCCESS;
}
/**
Worker function to execute a caller provided function on all enabled APs.
@param[in] Procedure A pointer to the function to be run on
enabled APs of the system.
@param[in] SingleThread If TRUE, then all the enabled APs execute
the function specified by Procedure one by
one, in ascending order of processor handle
number. If FALSE, then all the enabled APs
execute the function specified by Procedure
simultaneously.
@param[in] WaitEvent The event created by the caller with CreateEvent()
service.
@param[in] TimeoutInMicrosecsond Indicates the time limit in microseconds for
APs to return from Procedure, either for
blocking or non-blocking mode.
@param[in] ProcedureArgument The parameter passed into Procedure for
all APs.
@param[out] FailedCpuList If all APs finish successfully, then its
content is set to NULL. If not all APs
finish before timeout expires, then its
content is set to address of the buffer
holding handle numbers of the failed APs.
@retval EFI_SUCCESS In blocking mode, all APs have finished before
the timeout expired.
@retval EFI_SUCCESS In non-blocking mode, function has been dispatched
to all enabled APs.
@retval others Failed to Startup all APs.
**/
EFI_STATUS
StartupAllAPsWorker (
IN EFI_AP_PROCEDURE Procedure,
IN BOOLEAN SingleThread,
IN EFI_EVENT WaitEvent OPTIONAL,
IN UINTN TimeoutInMicroseconds,
IN VOID *ProcedureArgument OPTIONAL,
OUT UINTN **FailedCpuList OPTIONAL
)
{
EFI_STATUS Status;
CPU_MP_DATA *CpuMpData;
UINTN ProcessorCount;
UINTN ProcessorNumber;
UINTN CallerNumber;
CPU_AP_DATA *CpuData;
BOOLEAN HasEnabledAp;
CPU_STATE ApState;
CpuMpData = GetCpuMpData ();
if (FailedCpuList != NULL) {
*FailedCpuList = NULL;
}
if (CpuMpData->CpuCount == 1) {
return EFI_NOT_STARTED;
}
if (Procedure == NULL) {
return EFI_INVALID_PARAMETER;
}
//
// Check whether caller processor is BSP
//
MpInitLibWhoAmI (&CallerNumber);
if (CallerNumber != CpuMpData->BspNumber) {
return EFI_DEVICE_ERROR;
}
//
// Update AP state
//
CheckAndUpdateApsStatus ();
ProcessorCount = CpuMpData->CpuCount;
HasEnabledAp = FALSE;
//
// Check whether all enabled APs are idle.
// If any enabled AP is not idle, return EFI_NOT_READY.
//
for (ProcessorNumber = 0; ProcessorNumber < ProcessorCount; ProcessorNumber++) {
CpuData = &CpuMpData->CpuData[ProcessorNumber];
if (ProcessorNumber != CpuMpData->BspNumber) {
ApState = GetApState (CpuData);
if (ApState != CpuStateDisabled) {
HasEnabledAp = TRUE;
if (ApState != CpuStateIdle) {
//
// If any enabled APs are busy, return EFI_NOT_READY.
//
return EFI_NOT_READY;
}
}
}
}
if (!HasEnabledAp) {
//
// If no enabled AP exists, return EFI_NOT_STARTED.
//
return EFI_NOT_STARTED;
}
CpuMpData->StartCount = 0;
for (ProcessorNumber = 0; ProcessorNumber < ProcessorCount; ProcessorNumber++) {
CpuData = &CpuMpData->CpuData[ProcessorNumber];
CpuData->Waiting = FALSE;
if (ProcessorNumber != CpuMpData->BspNumber) {
if (CpuData->State == CpuStateIdle) {
//
// Mark this processor as responsible for current calling.
//
CpuData->Waiting = TRUE;
CpuMpData->StartCount++;
}
}
}
CpuMpData->Procedure = Procedure;
CpuMpData->ProcArguments = ProcedureArgument;
CpuMpData->SingleThread = SingleThread;
CpuMpData->FinishedCount = 0;
CpuMpData->RunningCount = 0;
CpuMpData->FailedCpuList = FailedCpuList;
CpuMpData->ExpectedTime = CalculateTimeout (
TimeoutInMicroseconds,
&CpuMpData->CurrentTime
);
CpuMpData->TotalTime = 0;
CpuMpData->WaitEvent = WaitEvent;
if (!SingleThread) {
WakeUpAP (CpuMpData, TRUE, 0, Procedure, ProcedureArgument);
} else {
for (ProcessorNumber = 0; ProcessorNumber < ProcessorCount; ProcessorNumber++) {
if (ProcessorNumber == CallerNumber) {
continue;
}
if (CpuMpData->CpuData[ProcessorNumber].Waiting) {
WakeUpAP (CpuMpData, FALSE, ProcessorNumber, Procedure, ProcedureArgument);
break;
}
}
}
Status = EFI_SUCCESS;
if (WaitEvent == NULL) {
do {
Status = CheckAllAPs ();
} while (Status == EFI_NOT_READY);
}
return Status;
}
/**
Worker function to let the caller get one enabled AP to execute a caller-provided
function.
@param[in] Procedure A pointer to the function to be run on
enabled APs of the system.
@param[in] ProcessorNumber The handle number of the AP.
@param[in] WaitEvent The event created by the caller with CreateEvent()
service.
@param[in] TimeoutInMicrosecsond Indicates the time limit in microseconds for
APs to return from Procedure, either for
blocking or non-blocking mode.
@param[in] ProcedureArgument The parameter passed into Procedure for
all APs.
@param[out] Finished If AP returns from Procedure before the
timeout expires, its content is set to TRUE.
Otherwise, the value is set to FALSE.
@retval EFI_SUCCESS In blocking mode, specified AP finished before
the timeout expires.
@retval others Failed to Startup AP.
**/
EFI_STATUS
StartupThisAPWorker (
IN EFI_AP_PROCEDURE Procedure,
IN UINTN ProcessorNumber,
IN EFI_EVENT WaitEvent OPTIONAL,
IN UINTN TimeoutInMicroseconds,
IN VOID *ProcedureArgument OPTIONAL,
OUT BOOLEAN *Finished OPTIONAL
)
{
EFI_STATUS Status;
CPU_MP_DATA *CpuMpData;
CPU_AP_DATA *CpuData;
UINTN CallerNumber;
CpuMpData = GetCpuMpData ();
if (Finished != NULL) {
*Finished = FALSE;
}
//
// Check whether caller processor is BSP
//
MpInitLibWhoAmI (&CallerNumber);
if (CallerNumber != CpuMpData->BspNumber) {
return EFI_DEVICE_ERROR;
}
//
// Check whether processor with the handle specified by ProcessorNumber exists
//
if (ProcessorNumber >= CpuMpData->CpuCount) {
return EFI_NOT_FOUND;
}
//
// Check whether specified processor is BSP
//
if (ProcessorNumber == CpuMpData->BspNumber) {
return EFI_INVALID_PARAMETER;
}
//
// Check parameter Procedure
//
if (Procedure == NULL) {
return EFI_INVALID_PARAMETER;
}
//
// Update AP state
//
CheckAndUpdateApsStatus ();
//
// Check whether specified AP is disabled
//
if (GetApState (&CpuMpData->CpuData[ProcessorNumber]) == CpuStateDisabled) {
return EFI_INVALID_PARAMETER;
}
//
// If WaitEvent is not NULL, execute in non-blocking mode.
// BSP saves data for CheckAPsStatus(), and returns EFI_SUCCESS.
// CheckAPsStatus() will check completion and timeout periodically.
//
CpuData = &CpuMpData->CpuData[ProcessorNumber];
CpuData->WaitEvent = WaitEvent;
CpuData->Finished = Finished;
CpuData->ExpectedTime = CalculateTimeout (TimeoutInMicroseconds, &CpuData->CurrentTime);
CpuData->TotalTime = 0;
WakeUpAP (CpuMpData, FALSE, ProcessorNumber, Procedure, ProcedureArgument);
//
// If WaitEvent is NULL, execute in blocking mode.
// BSP checks AP's state until it finishes or TimeoutInMicrosecsond expires.
//
Status = EFI_SUCCESS;
if (WaitEvent == NULL) {
do {
Status = CheckThisAP (ProcessorNumber);
} while (Status == EFI_NOT_READY);
}
return Status;
}
/**
Get pointer to CPU MP Data structure from GUIDed HOB.
@return The pointer to CPU MP Data structure.
**/
CPU_MP_DATA *
GetCpuMpDataFromGuidedHob (
VOID
)
{
EFI_HOB_GUID_TYPE *GuidHob;
VOID *DataInHob;
CPU_MP_DATA *CpuMpData;
CpuMpData = NULL;
GuidHob = GetFirstGuidHob (&mCpuInitMpLibHobGuid);
if (GuidHob != NULL) {
DataInHob = GET_GUID_HOB_DATA (GuidHob);
CpuMpData = (CPU_MP_DATA *) (*(UINTN *) DataInHob);
}
return CpuMpData;
}
/**
Get available system memory below 1MB by specified size.
@param[in] CpuMpData The pointer to CPU MP Data structure.
**/
VOID
BackupAndPrepareWakeupBuffer(
IN CPU_MP_DATA *CpuMpData
)
{
CopyMem (
(VOID *) CpuMpData->BackupBuffer,
(VOID *) CpuMpData->WakeupBuffer,
CpuMpData->BackupBufferSize
);
CopyMem (
(VOID *) CpuMpData->WakeupBuffer,
(VOID *) CpuMpData->AddressMap.RendezvousFunnelAddress,
CpuMpData->AddressMap.RendezvousFunnelSize
);
}
/**
Restore wakeup buffer data.
@param[in] CpuMpData The pointer to CPU MP Data structure.
**/
VOID
RestoreWakeupBuffer(
IN CPU_MP_DATA *CpuMpData
)
{
CopyMem (
(VOID *) CpuMpData->WakeupBuffer,
(VOID *) CpuMpData->BackupBuffer,
CpuMpData->BackupBufferSize
);
}
Reference in New Issue View Git Blame Copy Permalink