audk/MdeModulePkg/Library/PiDxeS3BootScriptLib/BootScriptExecute.c

1793 lines
63 KiB
C

/** @file
Interpret and execute the S3 data in S3 boot script.
Copyright (c) 2006 - 2015, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions
of the BSD License which accompanies this distribution. The
full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include "InternalBootScriptLib.h"
/**
Executes an SMBus operation to an SMBus controller. Returns when either the command has been
executed or an error is encountered in doing the operation.
The SmbusExecute() function provides a standard way to execute an operation as defined in the System
Management Bus (SMBus) Specification. The resulting transaction will be either that the SMBus
slave devices accept this transaction or that this function returns with error.
@param SmbusAddress Address that encodes the SMBUS Slave Address, SMBUS Command, SMBUS Data Length,
and PEC.
@param Operation Signifies which particular SMBus hardware protocol instance that
it will use to execute the SMBus transactions. This SMBus
hardware protocol is defined by the SMBus Specification and is
not related to EFI.
@param Length Signifies the number of bytes that this operation will do. The
maximum number of bytes can be revision specific and operation
specific. This field will contain the actual number of bytes that
are executed for this operation. Not all operations require this
argument.
@param Buffer Contains the value of data to execute to the SMBus slave device.
Not all operations require this argument. The length of this
buffer is identified by Length.
@retval EFI_SUCCESS The last data that was returned from the access matched the poll
exit criteria.
@retval EFI_CRC_ERROR Checksum is not correct (PEC is incorrect).
@retval EFI_TIMEOUT Timeout expired before the operation was completed. Timeout is
determined by the SMBus host controller device.
@retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
@retval EFI_DEVICE_ERROR The request was not completed because a failure that was
reflected in the Host Status Register bit. Device errors are a
result of a transaction collision, illegal command field,
unclaimed cycle (host initiated), or bus errors (collisions).
@retval EFI_INVALID_PARAMETER Operation is not defined in EFI_SMBUS_OPERATION.
@retval EFI_INVALID_PARAMETER Length/Buffer is NULL for operations except for EfiSmbusQuickRead
and EfiSmbusQuickWrite. Length is outside the range of valid
values.
@retval EFI_UNSUPPORTED The SMBus operation or PEC is not supported.
@retval EFI_BUFFER_TOO_SMALL Buffer is not sufficient for this operation.
**/
EFI_STATUS
SmbusExecute (
IN UINTN SmbusAddress,
IN EFI_SMBUS_OPERATION Operation,
IN OUT UINTN *Length,
IN OUT VOID *Buffer
)
{
EFI_STATUS Status;
UINT8 WorkBuffer[MAX_SMBUS_BLOCK_LEN];
switch (Operation) {
case EfiSmbusQuickRead:
DEBUG ((EFI_D_INFO, "EfiSmbusQuickRead - 0x%08x\n", SmbusAddress));
SmBusQuickRead (SmbusAddress, &Status);
break;
case EfiSmbusQuickWrite:
DEBUG ((EFI_D_INFO, "EfiSmbusQuickWrite - 0x%08x\n", SmbusAddress));
SmBusQuickWrite (SmbusAddress, &Status);
break;
case EfiSmbusReceiveByte:
DEBUG ((EFI_D_INFO, "EfiSmbusReceiveByte - 0x%08x\n", SmbusAddress));
SmBusReceiveByte (SmbusAddress, &Status);
break;
case EfiSmbusSendByte:
DEBUG ((EFI_D_INFO, "EfiSmbusSendByte - 0x%08x (0x%02x)\n", SmbusAddress, (UINTN)*(UINT8 *) Buffer));
SmBusSendByte (SmbusAddress, *(UINT8 *) Buffer, &Status);
break;
case EfiSmbusReadByte:
DEBUG ((EFI_D_INFO, "EfiSmbusReadByte - 0x%08x\n", SmbusAddress));
SmBusReadDataByte (SmbusAddress, &Status);
break;
case EfiSmbusWriteByte:
DEBUG ((EFI_D_INFO, "EfiSmbusWriteByte - 0x%08x (0x%02x)\n", SmbusAddress, (UINTN)*(UINT8 *) Buffer));
SmBusWriteDataByte (SmbusAddress, *(UINT8 *) Buffer, &Status);
break;
case EfiSmbusReadWord:
DEBUG ((EFI_D_INFO, "EfiSmbusReadWord - 0x%08x\n", SmbusAddress));
SmBusReadDataWord (SmbusAddress, &Status);
break;
case EfiSmbusWriteWord:
DEBUG ((EFI_D_INFO, "EfiSmbusWriteWord - 0x%08x (0x%04x)\n", SmbusAddress, (UINTN)*(UINT16 *) Buffer));
SmBusWriteDataWord (SmbusAddress, *(UINT16 *) Buffer, &Status);
break;
case EfiSmbusProcessCall:
DEBUG ((EFI_D_INFO, "EfiSmbusProcessCall - 0x%08x (0x%04x)\n", SmbusAddress, (UINTN)*(UINT16 *) Buffer));
SmBusProcessCall (SmbusAddress, *(UINT16 *) Buffer, &Status);
break;
case EfiSmbusReadBlock:
DEBUG ((EFI_D_INFO, "EfiSmbusReadBlock - 0x%08x\n", SmbusAddress));
SmBusReadBlock (SmbusAddress, WorkBuffer, &Status);
break;
case EfiSmbusWriteBlock:
DEBUG ((EFI_D_INFO, "EfiSmbusWriteBlock - 0x%08x\n", SmbusAddress));
SmBusWriteBlock ((SmbusAddress + SMBUS_LIB_ADDRESS (0, 0, (*Length), FALSE)), Buffer, &Status);
break;
case EfiSmbusBWBRProcessCall:
DEBUG ((EFI_D_INFO, "EfiSmbusBWBRProcessCall - 0x%08x\n", SmbusAddress));
SmBusBlockProcessCall ((SmbusAddress + SMBUS_LIB_ADDRESS (0, 0, (*Length), FALSE)), Buffer, WorkBuffer, &Status);
break;
default:
return EFI_INVALID_PARAMETER;
}
return Status;
}
/**
Translates boot script width and address stride to MDE library interface.
@param Width Width of the operation.
@param Address Address of the operation.
@param AddressStride Instride for stepping input buffer.
@param BufferStride Outstride for stepping output buffer.
@retval EFI_SUCCESS Successful translation.
@retval EFI_INVALID_PARAMETER Width or Address is invalid.
**/
EFI_STATUS
BuildLoopData (
IN S3_BOOT_SCRIPT_LIB_WIDTH Width,
IN UINT64 Address,
OUT UINTN *AddressStride,
OUT UINTN *BufferStride
)
{
UINTN AlignMask;
if (Width >= S3BootScriptWidthMaximum) {
return EFI_INVALID_PARAMETER;
}
*AddressStride = (UINT32)(1 << (Width & 0x03));
*BufferStride = *AddressStride;
AlignMask = *AddressStride - 1;
if ((Address & AlignMask) != 0) {
return EFI_INVALID_PARAMETER;
}
if (Width >= S3BootScriptWidthFifoUint8 && Width <= S3BootScriptWidthFifoUint64) {
*AddressStride = 0;
}
if (Width >= S3BootScriptWidthFillUint8 && Width <= S3BootScriptWidthFillUint64) {
*BufferStride = 0;
}
return EFI_SUCCESS;
}
/**
Perform IO read operation
@param[in] Width Width of the operation.
@param[in] Address Address of the operation.
@param[in] Count Count of the number of accesses to perform.
@param[out] Buffer Pointer to the buffer to read from I/O space.
@retval EFI_SUCCESS The data was written to the EFI System.
@retval EFI_INVALID_PARAMETER Width is invalid for this EFI System.
Buffer is NULL.
The Buffer is not aligned for the given Width.
Address is outside the legal range of I/O ports.
**/
EFI_STATUS
ScriptIoRead (
IN S3_BOOT_SCRIPT_LIB_WIDTH Width,
IN UINT64 Address,
IN UINTN Count,
OUT VOID *Buffer
)
{
EFI_STATUS Status;
UINTN AddressStride;
UINTN BufferStride;
PTR Out;
Out.Buf = (UINT8 *) Buffer;
if (Address > MAX_IO_ADDRESS) {
return EFI_INVALID_PARAMETER;
}
Status = BuildLoopData (Width, Address, &AddressStride, &BufferStride);
if (EFI_ERROR (Status)) {
return Status;
}
//
// Loop for each iteration and move the data
//
for (; Count > 0; Count--, Address += AddressStride, Out.Buf += BufferStride) {
switch (Width) {
case S3BootScriptWidthUint8:
DEBUG ((EFI_D_INFO, "S3BootScriptWidthUint8 - 0x%08x\n", (UINTN) Address));
*Out.Uint8 = IoRead8 ((UINTN) Address);
break;
case S3BootScriptWidthFifoUint8:
DEBUG ((EFI_D_INFO, "S3BootScriptWidthFifoUint8 - 0x%08x\n", (UINTN) Address));
*Out.Uint8 = IoRead8 ((UINTN) Address);
break;
case S3BootScriptWidthFillUint8:
DEBUG ((EFI_D_INFO, "S3BootScriptWidthFillUint8 - 0x%08x\n", (UINTN) Address));
*Out.Uint8 = IoRead8 ((UINTN) Address);
break;
case S3BootScriptWidthUint16:
DEBUG ((EFI_D_INFO, "S3BootScriptWidthUint16 - 0x%08x\n", (UINTN) Address));
*Out.Uint16 = IoRead16 ((UINTN) Address);
break;
case S3BootScriptWidthFifoUint16:
DEBUG ((EFI_D_INFO, "S3BootScriptWidthFifoUint16 - 0x%08x\n", (UINTN) Address));
*Out.Uint16 = IoRead16 ((UINTN) Address);
break;
case S3BootScriptWidthFillUint16:
DEBUG ((EFI_D_INFO, "S3BootScriptWidthFillUint16 - 0x%08x\n", (UINTN) Address));
*Out.Uint16 = IoRead16 ((UINTN) Address);
break;
case S3BootScriptWidthUint32:
DEBUG ((EFI_D_INFO, "S3BootScriptWidthUint32 - 0x%08x\n", (UINTN) Address));
*Out.Uint32 = IoRead32 ((UINTN) Address);
break;
case S3BootScriptWidthFifoUint32:
DEBUG ((EFI_D_INFO, "S3BootScriptWidthFifoUint32 - 0x%08x\n", (UINTN) Address));
*Out.Uint32 = IoRead32 ((UINTN) Address);
break;
case S3BootScriptWidthFillUint32:
DEBUG ((EFI_D_INFO, "S3BootScriptWidthFillUint32 - 0x%08x\n", (UINTN) Address));
*Out.Uint32 = IoRead32 ((UINTN) Address);
break;
case S3BootScriptWidthUint64:
DEBUG ((EFI_D_INFO, "S3BootScriptWidthUint64 - 0x%08x\n", (UINTN) Address));
*Out.Uint64 = IoRead64 ((UINTN) Address);
break;
case S3BootScriptWidthFifoUint64:
DEBUG ((EFI_D_INFO, "S3BootScriptWidthFifoUint64 - 0x%08x\n", (UINTN) Address));
*Out.Uint64 = IoRead64 ((UINTN) Address);
break;
case S3BootScriptWidthFillUint64:
DEBUG ((EFI_D_INFO, "S3BootScriptWidthFillUint64 - 0x%08x\n", (UINTN) Address));
*Out.Uint64 = IoRead64 ((UINTN) Address);
break;
default:
return EFI_INVALID_PARAMETER;
}
}
return EFI_SUCCESS;
}
/**
Perform IO write operation
@param[in] Width Width of the operation.
@param[in] Address Address of the operation.
@param[in] Count Count of the number of accesses to perform.
@param[in] Buffer Pointer to the buffer to write to I/O space.
@retval EFI_SUCCESS The data was written to the EFI System.
@retval EFI_INVALID_PARAMETER Width is invalid for this EFI System.
Buffer is NULL.
The Buffer is not aligned for the given Width.
Address is outside the legal range of I/O ports.
**/
EFI_STATUS
ScriptIoWrite (
IN S3_BOOT_SCRIPT_LIB_WIDTH Width,
IN UINT64 Address,
IN UINTN Count,
IN VOID *Buffer
)
{
EFI_STATUS Status;
UINTN AddressStride;
UINTN BufferStride;
UINT64 OriginalAddress;
PTR In;
PTR OriginalIn;
In.Buf = (UINT8 *) Buffer;
if (Address > MAX_IO_ADDRESS) {
return EFI_INVALID_PARAMETER;
}
Status = BuildLoopData (Width, Address, &AddressStride, &BufferStride);
if (EFI_ERROR (Status)) {
return Status;
}
//
// Loop for each iteration and move the data
//
OriginalAddress = Address;
OriginalIn.Buf = In.Buf;
for (; Count > 0; Count--, Address += AddressStride, In.Buf += BufferStride) {
switch (Width) {
case S3BootScriptWidthUint8:
DEBUG ((EFI_D_INFO, "S3BootScriptWidthUint8 - 0x%08x (0x%02x)\n", (UINTN)Address, (UINTN)*In.Uint8));
IoWrite8 ((UINTN) Address, *In.Uint8);
break;
case S3BootScriptWidthFifoUint8:
DEBUG ((EFI_D_INFO, "S3BootScriptWidthFifoUint8 - 0x%08x (0x%02x)\n", (UINTN)OriginalAddress, (UINTN)*In.Uint8));
IoWrite8 ((UINTN) OriginalAddress, *In.Uint8);
break;
case S3BootScriptWidthFillUint8:
DEBUG ((EFI_D_INFO, "S3BootScriptWidthFillUint8 - 0x%08x (0x%02x)\n", (UINTN)Address, (UINTN)*OriginalIn.Uint8));
IoWrite8 ((UINTN) Address, *OriginalIn.Uint8);
break;
case S3BootScriptWidthUint16:
DEBUG ((EFI_D_INFO, "S3BootScriptWidthUint16 - 0x%08x (0x%04x)\n", (UINTN)Address, (UINTN)*In.Uint16));
IoWrite16 ((UINTN) Address, *In.Uint16);
break;
case S3BootScriptWidthFifoUint16:
DEBUG ((EFI_D_INFO, "S3BootScriptWidthFifoUint16 - 0x%08x (0x%04x)\n", (UINTN)OriginalAddress, (UINTN)*In.Uint16));
IoWrite16 ((UINTN) OriginalAddress, *In.Uint16);
break;
case S3BootScriptWidthFillUint16:
DEBUG ((EFI_D_INFO, "S3BootScriptWidthFillUint16 - 0x%08x (0x%04x)\n", (UINTN)Address, (UINTN)*OriginalIn.Uint16));
IoWrite16 ((UINTN) Address, *OriginalIn.Uint16);
break;
case S3BootScriptWidthUint32:
DEBUG ((EFI_D_INFO, "S3BootScriptWidthUint32 - 0x%08x (0x%08x)\n", (UINTN)Address, (UINTN)*In.Uint32));
IoWrite32 ((UINTN) Address, *In.Uint32);
break;
case S3BootScriptWidthFifoUint32:
DEBUG ((EFI_D_INFO, "S3BootScriptWidthFifoUint32 - 0x%08x (0x%08x)\n", (UINTN)OriginalAddress, (UINTN)*In.Uint32));
IoWrite32 ((UINTN) OriginalAddress, *In.Uint32);
break;
case S3BootScriptWidthFillUint32:
DEBUG ((EFI_D_INFO, "S3BootScriptWidthFillUint32 - 0x%08x (0x%08x)\n", (UINTN)Address, (UINTN)*OriginalIn.Uint32));
IoWrite32 ((UINTN) Address, *OriginalIn.Uint32);
break;
case S3BootScriptWidthUint64:
DEBUG ((EFI_D_INFO, "S3BootScriptWidthUint64 - 0x%08x (0x%016lx)\n", (UINTN)Address, *In.Uint64));
IoWrite64 ((UINTN) Address, *In.Uint64);
break;
case S3BootScriptWidthFifoUint64:
DEBUG ((EFI_D_INFO, "S3BootScriptWidthFifoUint64 - 0x%08x (0x%016lx)\n", (UINTN)OriginalAddress, *In.Uint64));
IoWrite64 ((UINTN) OriginalAddress, *In.Uint64);
break;
case S3BootScriptWidthFillUint64:
DEBUG ((EFI_D_INFO, "S3BootScriptWidthFillUint64 - 0x%08x (0x%016lx)\n", (UINTN)Address, *OriginalIn.Uint64));
IoWrite64 ((UINTN) Address, *OriginalIn.Uint64);
break;
default:
return EFI_INVALID_PARAMETER;
}
}
return EFI_SUCCESS;
}
/**
Interprete the boot script node with EFI_BOOT_SCRIPT_IO_WRITE OP code.
@param Script Pointer to the node which is to be interpreted.
@retval EFI_SUCCESS The data was written to the EFI System.
@retval EFI_INVALID_PARAMETER Width is invalid for this EFI System.
Buffer is NULL.
The Buffer is not aligned for the given Width.
Address is outside the legal range of I/O ports.
**/
EFI_STATUS
BootScriptExecuteIoWrite (
IN UINT8 *Script
)
{
S3_BOOT_SCRIPT_LIB_WIDTH Width;
UINT64 Address;
UINTN Count;
VOID *Buffer;
EFI_BOOT_SCRIPT_IO_WRITE IoWrite;
CopyMem ((VOID*)&IoWrite, (VOID*)Script, sizeof(EFI_BOOT_SCRIPT_IO_WRITE));
Width = (S3_BOOT_SCRIPT_LIB_WIDTH) IoWrite.Width;
Address = IoWrite.Address;
Count = IoWrite.Count;
Buffer = Script + sizeof (EFI_BOOT_SCRIPT_IO_WRITE);
DEBUG ((EFI_D_INFO, "BootScriptExecuteIoWrite - 0x%08x, 0x%08x, 0x%08x\n", (UINTN)Address, Count, (UINTN)Width));
return ScriptIoWrite(Width, Address, Count, Buffer);
}
/**
Perform memory read operation
@param Width Width of the operation.
@param Address Address of the operation.
@param Count Count of the number of accesses to perform.
@param Buffer Pointer to the buffer read from memory.
@retval EFI_SUCCESS The data was written to the EFI System.
@retval EFI_INVALID_PARAMETER Width is invalid for this EFI System.
Buffer is NULL.
The Buffer is not aligned for the given Width.
@retval EFI_UNSUPPORTED The address range specified by Address, Width, and Count
is not valid for this EFI System.
**/
EFI_STATUS
ScriptMemoryRead (
IN S3_BOOT_SCRIPT_LIB_WIDTH Width,
IN UINT64 Address,
IN UINTN Count,
IN OUT VOID *Buffer
)
{
EFI_STATUS Status;
UINTN AddressStride;
UINTN BufferStride;
PTR Out;
Out.Buf = Buffer;
Status = BuildLoopData (Width, Address, &AddressStride, &BufferStride);
if (EFI_ERROR (Status)) {
return Status;
}
//
// Loop for each iteration and move the data
//
for (; Count > 0; Count--, Address += AddressStride, Out.Buf += BufferStride) {
switch (Width) {
case S3BootScriptWidthUint8:
DEBUG ((EFI_D_INFO, "S3BootScriptWidthUint8 - 0x%08x\n", (UINTN)Address));
*Out.Uint8 = MmioRead8 ((UINTN) Address);
break;
case S3BootScriptWidthFifoUint8:
DEBUG ((EFI_D_INFO, "S3BootScriptWidthFifoUint8 - 0x%08x\n", (UINTN)Address));
*Out.Uint8 = MmioRead8 ((UINTN) Address);
break;
case S3BootScriptWidthFillUint8:
DEBUG ((EFI_D_INFO, "S3BootScriptWidthFillUint8 - 0x%08x\n", (UINTN)Address));
*Out.Uint8 = MmioRead8 ((UINTN) Address);
break;
case S3BootScriptWidthUint16:
DEBUG ((EFI_D_INFO, "S3BootScriptWidthUint16 - 0x%08x\n", (UINTN)Address));
*Out.Uint16 = MmioRead16 ((UINTN) Address);
break;
case S3BootScriptWidthFifoUint16:
DEBUG ((EFI_D_INFO, "S3BootScriptWidthFifoUint16 - 0x%08x\n", (UINTN)Address));
*Out.Uint16 = MmioRead16 ((UINTN) Address);
break;
case S3BootScriptWidthFillUint16:
DEBUG ((EFI_D_INFO, "S3BootScriptWidthFillUint16 - 0x%08x\n", (UINTN)Address));
*Out.Uint16 = MmioRead16 ((UINTN) Address);
break;
case S3BootScriptWidthUint32:
DEBUG ((EFI_D_INFO, "S3BootScriptWidthUint32 - 0x%08x\n", (UINTN)Address));
*Out.Uint32 = MmioRead32 ((UINTN) Address);
break;
case S3BootScriptWidthFifoUint32:
DEBUG ((EFI_D_INFO, "S3BootScriptWidthFifoUint32 - 0x%08x\n", (UINTN)Address));
*Out.Uint32 = MmioRead32 ((UINTN) Address);
break;
case S3BootScriptWidthFillUint32:
DEBUG ((EFI_D_INFO, "S3BootScriptWidthFillUint32 - 0x%08x\n", (UINTN)Address));
*Out.Uint32 = MmioRead32 ((UINTN) Address);
break;
case S3BootScriptWidthUint64:
DEBUG ((EFI_D_INFO, "S3BootScriptWidthUint64 - 0x%08x\n", (UINTN)Address));
*Out.Uint64 = MmioRead64 ((UINTN) Address);
break;
case S3BootScriptWidthFifoUint64:
DEBUG ((EFI_D_INFO, "S3BootScriptWidthFifoUint64 - 0x%08x\n", (UINTN)Address));
*Out.Uint64 = MmioRead64 ((UINTN) Address);
break;
case S3BootScriptWidthFillUint64:
DEBUG ((EFI_D_INFO, "S3BootScriptWidthFillUint64 - 0x%08x\n", (UINTN)Address));
*Out.Uint64 = MmioRead64 ((UINTN) Address);
break;
default:
return EFI_UNSUPPORTED;
}
}
return EFI_SUCCESS;
}
/**
Perform memory write operation
@param Width Width of the operation.
@param Address Address of the operation.
@param Count Count of the number of accesses to perform.
@param Buffer Pointer to the buffer write to memory.
@retval EFI_SUCCESS The data was written to the EFI System.
@retval EFI_INVALID_PARAMETER Width is invalid for this EFI System.
Buffer is NULL.
The Buffer is not aligned for the given Width.
@retval EFI_UNSUPPORTED The address range specified by Address, Width, and Count
is not valid for this EFI System.
**/
EFI_STATUS
ScriptMemoryWrite (
IN S3_BOOT_SCRIPT_LIB_WIDTH Width,
IN UINT64 Address,
IN UINTN Count,
IN OUT VOID *Buffer
)
{
EFI_STATUS Status;
UINTN AddressStride;
UINT64 OriginalAddress;
UINTN BufferStride;
PTR In;
PTR OriginalIn;
In.Buf = Buffer;
Status = BuildLoopData (Width, Address, &AddressStride, &BufferStride);
if (EFI_ERROR (Status)) {
return Status;
}
//
// Loop for each iteration and move the data
//
OriginalAddress = Address;
OriginalIn.Buf = In.Buf;
for (; Count > 0; Count--, Address += AddressStride, In.Buf += BufferStride) {
switch (Width) {
case S3BootScriptWidthUint8:
DEBUG ((EFI_D_INFO, "S3BootScriptWidthUint8 - 0x%08x (0x%02x)\n", (UINTN)Address, (UINTN)*In.Uint8));
MmioWrite8 ((UINTN) Address, *In.Uint8);
break;
case S3BootScriptWidthFifoUint8:
DEBUG ((EFI_D_INFO, "S3BootScriptWidthFifoUint8 - 0x%08x (0x%02x)\n", (UINTN)OriginalAddress, (UINTN)*In.Uint8));
MmioWrite8 ((UINTN) OriginalAddress, *In.Uint8);
break;
case S3BootScriptWidthFillUint8:
DEBUG ((EFI_D_INFO, "S3BootScriptWidthFillUint8 - 0x%08x (0x%02x)\n", (UINTN)Address, (UINTN)*OriginalIn.Uint8));
MmioWrite8 ((UINTN) Address, *OriginalIn.Uint8);
break;
case S3BootScriptWidthUint16:
DEBUG ((EFI_D_INFO, "S3BootScriptWidthUint16 - 0x%08x (0x%04x)\n", (UINTN)Address, (UINTN)*In.Uint16));
MmioWrite16 ((UINTN) Address, *In.Uint16);
break;
case S3BootScriptWidthFifoUint16:
DEBUG ((EFI_D_INFO, "S3BootScriptWidthFifoUint16 - 0x%08x (0x%04x)\n", (UINTN)OriginalAddress, (UINTN)*In.Uint16));
MmioWrite16 ((UINTN) OriginalAddress, *In.Uint16);
break;
case S3BootScriptWidthFillUint16:
DEBUG ((EFI_D_INFO, "S3BootScriptWidthFillUint16 - 0x%08x (0x%04x)\n", (UINTN)Address, (UINTN)*OriginalIn.Uint16));
MmioWrite16 ((UINTN) Address, *OriginalIn.Uint16);
break;
case S3BootScriptWidthUint32:
DEBUG ((EFI_D_INFO, "S3BootScriptWidthUint32 - 0x%08x (0x%08x)\n", (UINTN)Address, (UINTN)*In.Uint32));
MmioWrite32 ((UINTN) Address, *In.Uint32);
break;
case S3BootScriptWidthFifoUint32:
DEBUG ((EFI_D_INFO, "S3BootScriptWidthFifoUint32 - 0x%08x (0x%08x)\n", (UINTN)OriginalAddress, (UINTN)*In.Uint32));
MmioWrite32 ((UINTN) OriginalAddress, *In.Uint32);
break;
case S3BootScriptWidthFillUint32:
DEBUG ((EFI_D_INFO, "S3BootScriptWidthFillUint32 - 0x%08x (0x%08x)\n", (UINTN)Address, (UINTN)*OriginalIn.Uint32));
MmioWrite32 ((UINTN) Address, *OriginalIn.Uint32);
break;
case S3BootScriptWidthUint64:
DEBUG ((EFI_D_INFO, "S3BootScriptWidthUint64 - 0x%08x (0x%016lx)\n", (UINTN)Address, *In.Uint64));
MmioWrite64 ((UINTN) Address, *In.Uint64);
break;
case S3BootScriptWidthFifoUint64:
DEBUG ((EFI_D_INFO, "S3BootScriptWidthFifoUint64 - 0x%08x (0x%016lx)\n", (UINTN)OriginalAddress, *In.Uint64));
MmioWrite64 ((UINTN) OriginalAddress, *In.Uint64);
break;
case S3BootScriptWidthFillUint64:
DEBUG ((EFI_D_INFO, "S3BootScriptWidthFillUint64 - 0x%08x (0x%016lx)\n", (UINTN)Address, *OriginalIn.Uint64));
MmioWrite64 ((UINTN) Address, *OriginalIn.Uint64);
break;
default:
return EFI_UNSUPPORTED;
}
}
return EFI_SUCCESS;
}
/**
Interprete the boot script node with EFI_BOOT_SCRIPT_MEM_WRITE OP code.
@param[in] Script Pointer to the node which is to be interpreted.
@retval EFI_SUCCESS The data was written to the EFI System.
@retval EFI_INVALID_PARAMETER Width is invalid for this EFI System.
Buffer is NULL.
The Buffer is not aligned for the given Width.
@retval EFI_UNSUPPORTED The address range specified by Address, Width, and Count
is not valid for this EFI System.
**/
EFI_STATUS
BootScriptExecuteMemoryWrite (
IN UINT8 *Script
)
{
VOID *Buffer;
S3_BOOT_SCRIPT_LIB_WIDTH Width;
UINT64 Address;
UINTN Count;
EFI_BOOT_SCRIPT_MEM_WRITE MemWrite;
CopyMem((VOID*)&MemWrite, (VOID*)Script, sizeof(EFI_BOOT_SCRIPT_MEM_WRITE));
Width = (S3_BOOT_SCRIPT_LIB_WIDTH)MemWrite.Width;
Address = MemWrite.Address;
Count = MemWrite.Count;
Buffer = Script + sizeof(EFI_BOOT_SCRIPT_MEM_WRITE);
DEBUG ((EFI_D_INFO, "BootScriptExecuteMemoryWrite - 0x%08x, 0x%08x, 0x%08x\n", (UINTN)Address, Count, (UINTN)Width));
return ScriptMemoryWrite (Width,Address, Count, Buffer);
}
/**
Performance PCI configuration read operation
@param Width Width of the operation.
@param Address Address of the operation.
@param Count Count of the number of accesses to perform.
@param Buffer Pointer to the buffer read from PCI config space
@retval EFI_SUCCESS The read succeed.
@retval EFI_INVALID_PARAMETER if Width is not defined
@note A known Limitations in the implementation which is 64bits operations are not supported.
**/
EFI_STATUS
ScriptPciCfgRead (
IN S3_BOOT_SCRIPT_LIB_WIDTH Width,
IN UINT64 Address,
IN UINTN Count,
OUT VOID *Buffer
)
{
EFI_STATUS Status;
UINTN AddressStride;
UINTN BufferStride;
PTR Out;
UINTN PciAddress;
Out.Buf = (UINT8 *) Buffer;
PciAddress = PCI_ADDRESS_ENCODE (Address);
Status = BuildLoopData (Width, PciAddress, &AddressStride, &BufferStride);
if (EFI_ERROR (Status)) {
return Status;
}
//
// Loop for each iteration and move the data
//
for (; Count > 0; Count--, PciAddress += AddressStride, Out.Buf += BufferStride) {
switch (Width) {
case S3BootScriptWidthUint8:
DEBUG ((EFI_D_INFO, "S3BootScriptWidthUint8 - 0x%08x\n", PciAddress));
*Out.Uint8 = PciRead8 (PciAddress);
break;
case S3BootScriptWidthFifoUint8:
DEBUG ((EFI_D_INFO, "S3BootScriptWidthFifoUint8 - 0x%08x\n", PciAddress));
*Out.Uint8 = PciRead8 (PciAddress);
break;
case S3BootScriptWidthFillUint8:
DEBUG ((EFI_D_INFO, "S3BootScriptWidthFillUint8 - 0x%08x\n", PciAddress));
*Out.Uint8 = PciRead8 (PciAddress);
break;
case S3BootScriptWidthUint16:
DEBUG ((EFI_D_INFO, "S3BootScriptWidthUint16 - 0x%08x\n", PciAddress));
*Out.Uint16 = PciRead16 (PciAddress);
break;
case S3BootScriptWidthFifoUint16:
DEBUG ((EFI_D_INFO, "S3BootScriptWidthFifoUint16 - 0x%08x\n", PciAddress));
*Out.Uint16 = PciRead16 (PciAddress);
break;
case S3BootScriptWidthFillUint16:
DEBUG ((EFI_D_INFO, "S3BootScriptWidthFillUint16 - 0x%08x\n", PciAddress));
*Out.Uint16 = PciRead16 (PciAddress);
break;
case S3BootScriptWidthUint32:
DEBUG ((EFI_D_INFO, "S3BootScriptWidthUint32 - 0x%08x\n", PciAddress));
*Out.Uint32 = PciRead32 (PciAddress);
break;
case S3BootScriptWidthFifoUint32:
DEBUG ((EFI_D_INFO, "S3BootScriptWidthFifoUint32 - 0x%08x\n", PciAddress));
*Out.Uint32 = PciRead32 (PciAddress);
break;
case S3BootScriptWidthFillUint32:
DEBUG ((EFI_D_INFO, "S3BootScriptWidthFillUint32 - 0x%08x\n", PciAddress));
*Out.Uint32 = PciRead32 (PciAddress);
break;
default:
return EFI_INVALID_PARAMETER;
}
}
return EFI_SUCCESS;
}
/**
Performance PCI configuration write operation
@param Width Width of the operation.
@param Address Address of the operation.
@param Count Count of the number of accesses to perform.
@param Buffer Pointer to the buffer write to PCI config space
@retval EFI_SUCCESS The write succeed.
@retval EFI_INVALID_PARAMETER if Width is not defined
@note A known Limitations in the implementation which is 64bits operations are not supported.
**/
EFI_STATUS
ScriptPciCfgWrite (
IN S3_BOOT_SCRIPT_LIB_WIDTH Width,
IN UINT64 Address,
IN UINTN Count,
IN VOID *Buffer
)
{
EFI_STATUS Status;
UINTN AddressStride;
UINTN BufferStride;
UINTN OriginalPciAddress;
PTR In;
PTR OriginalIn;
UINTN PciAddress;
In.Buf = (UINT8 *) Buffer;
PciAddress = PCI_ADDRESS_ENCODE (Address);
Status = BuildLoopData (Width, PciAddress, &AddressStride, &BufferStride);
if (EFI_ERROR (Status)) {
return Status;
}
//
// Loop for each iteration and move the data
//
OriginalPciAddress = PciAddress;
OriginalIn.Buf = In.Buf;
for (; Count > 0; Count--, PciAddress += AddressStride, In.Buf += BufferStride) {
switch (Width) {
case S3BootScriptWidthUint8:
DEBUG ((EFI_D_INFO, "S3BootScriptWidthUint8 - 0x%08x (0x%02x)\n", PciAddress, (UINTN)*In.Uint8));
PciWrite8 (PciAddress, *In.Uint8);
break;
case S3BootScriptWidthFifoUint8:
DEBUG ((EFI_D_INFO, "S3BootScriptWidthFifoUint8 - 0x%08x (0x%02x)\n", OriginalPciAddress, (UINTN)*In.Uint8));
PciWrite8 (OriginalPciAddress, *In.Uint8);
break;
case S3BootScriptWidthFillUint8:
DEBUG ((EFI_D_INFO, "S3BootScriptWidthFillUint8 - 0x%08x (0x%02x)\n", PciAddress, (UINTN)*OriginalIn.Uint8));
PciWrite8 (PciAddress, *OriginalIn.Uint8);
break;
case S3BootScriptWidthUint16:
DEBUG ((EFI_D_INFO, "S3BootScriptWidthUint16 - 0x%08x (0x%04x)\n", PciAddress, (UINTN)*In.Uint16));
PciWrite16 (PciAddress, *In.Uint16);
break;
case S3BootScriptWidthFifoUint16:
DEBUG ((EFI_D_INFO, "S3BootScriptWidthFifoUint16 - 0x%08x (0x%04x)\n", OriginalPciAddress, (UINTN)*In.Uint16));
PciWrite16 (OriginalPciAddress, *In.Uint16);
break;
case S3BootScriptWidthFillUint16:
DEBUG ((EFI_D_INFO, "S3BootScriptWidthFillUint16 - 0x%08x (0x%04x)\n", PciAddress, (UINTN)*OriginalIn.Uint16));
PciWrite16 (PciAddress, *OriginalIn.Uint16);
break;
case S3BootScriptWidthUint32:
DEBUG ((EFI_D_INFO, "S3BootScriptWidthUint32 - 0x%08x (0x%08x)\n", PciAddress, (UINTN)*In.Uint32));
PciWrite32 (PciAddress, *In.Uint32);
break;
case S3BootScriptWidthFifoUint32:
DEBUG ((EFI_D_INFO, "S3BootScriptWidthFifoUint32 - 0x%08x (0x%08x)\n", OriginalPciAddress, (UINTN)*In.Uint32));
PciWrite32 (OriginalPciAddress, *In.Uint32);
break;
case S3BootScriptWidthFillUint32:
DEBUG ((EFI_D_INFO, "S3BootScriptWidthFillUint32 - 0x%08x (0x%08x)\n", (UINTN)PciAddress, (UINTN)*OriginalIn.Uint32));
PciWrite32 (PciAddress, *OriginalIn.Uint32);
break;
default:
return EFI_INVALID_PARAMETER;
}
}
return EFI_SUCCESS;
}
/**
Performance PCI configuration 2 read operation
@param Width Width of the operation.
@param Segment Pci segment number
@param Address Address of the operation.
@param Count Count of the number of accesses to perform.
@param Buffer Pointer to the buffer to read from PCI config space.
@retval EFI_SUCCESS The data was written to the EFI System.
@retval EFI_INVALID_PARAMETER Width is invalid for this EFI System.
Buffer is NULL.
The Buffer is not aligned for the given Width.
Address is outside the legal range of I/O ports.
@note A known Limitations in the implementation which is the 'Segment' parameter is assumed as
Zero, or else, assert.
**/
EFI_STATUS
ScriptPciCfg2Read (
IN S3_BOOT_SCRIPT_LIB_WIDTH Width,
IN UINT16 Segment,
IN UINT64 Address,
IN UINTN Count,
OUT VOID *Buffer
)
{
ASSERT (Segment==0);
return ScriptPciCfgRead (Width, Address, Count, Buffer);
}
/**
Performance PCI configuration 2 write operation
@param Width Width of the operation.
@param Segment Pci segment number
@param Address Address of the operation.
@param Count Count of the number of accesses to perform.
@param Buffer Pointer to the buffer to write to PCI config space.
@retval EFI_SUCCESS The data was written to the EFI System.
@retval EFI_INVALID_PARAMETER Width is invalid for this EFI System.
Buffer is NULL.
The Buffer is not aligned for the given Width.
Address is outside the legal range of I/O ports.
@note A known Limitations in the implementation which is the 'Segment' parameter is assumed as
Zero, or else, assert.
**/
EFI_STATUS
EFIAPI
ScriptPciCfg2Write (
IN S3_BOOT_SCRIPT_LIB_WIDTH Width,
IN UINT16 Segment,
IN UINT64 Address,
IN UINTN Count,
IN VOID *Buffer
)
{
ASSERT (Segment==0);
return ScriptPciCfgWrite (Width, Address, Count, Buffer);
}
/**
Interprete the boot script node with EFI_BOOT_SCRIPT_PCI_CONFIG_WRITE OP code.
@param Script The pointer of typed node in boot script table
@retval EFI_SUCCESS The operation was executed successfully
**/
EFI_STATUS
BootScriptExecutePciCfgWrite (
IN UINT8 *Script
)
{
VOID *Buffer;
S3_BOOT_SCRIPT_LIB_WIDTH Width;
UINT64 Address;
UINTN Count;
EFI_BOOT_SCRIPT_PCI_CONFIG_WRITE PciCfgWrite;
CopyMem ((VOID*)&PciCfgWrite, (VOID*)Script, sizeof(EFI_BOOT_SCRIPT_PCI_CONFIG_WRITE));
Width = (S3_BOOT_SCRIPT_LIB_WIDTH)PciCfgWrite.Width;
Address = PciCfgWrite.Address;
Count = PciCfgWrite.Count;
Buffer = Script + sizeof(EFI_BOOT_SCRIPT_PCI_CONFIG_WRITE);
DEBUG ((EFI_D_INFO, "BootScriptExecutePciCfgWrite - 0x%08x, 0x%08x, 0x%08x\n", PCI_ADDRESS_ENCODE (Address), Count, (UINTN)Width));
return ScriptPciCfgWrite (Width, Address, Count, Buffer);
}
/**
Interprete the boot script node with EFI_BOOT_SCRIPT_IO_READ_WRITE OP code.
@param Script The pointer of typed node in boot script table
@param AndMask Mask value for 'and' operation
@param OrMask Mask value for 'or' operation
@retval EFI_SUCCESS The operation was executed successfully
**/
EFI_STATUS
BootScriptExecuteIoReadWrite (
IN UINT8 *Script,
IN UINT64 AndMask,
IN UINT64 OrMask
)
{
EFI_STATUS Status;
UINT64 Data;
EFI_BOOT_SCRIPT_IO_READ_WRITE IoReadWrite;
Data = 0;
CopyMem((VOID*)&IoReadWrite, (VOID*)Script, sizeof(EFI_BOOT_SCRIPT_IO_READ_WRITE));
DEBUG ((EFI_D_INFO, "BootScriptExecuteIoReadWrite - 0x%08x, 0x%016lx, 0x%016lx\n", (UINTN)IoReadWrite.Address, AndMask, OrMask));
Status = ScriptIoRead (
(S3_BOOT_SCRIPT_LIB_WIDTH) IoReadWrite.Width,
IoReadWrite.Address,
1,
&Data
);
if (!EFI_ERROR (Status)) {
Data = (Data & AndMask) | OrMask;
Status = ScriptIoWrite (
(S3_BOOT_SCRIPT_LIB_WIDTH) IoReadWrite.Width,
IoReadWrite.Address,
1,
&Data
);
}
return Status;
}
/**
Interprete the boot script node with EFI_BOOT_SCRIPT_MEM_READ_WRITE OP code.
@param Script The pointer of typed node in boot script table
@param AndMask Mask value for 'and' operation
@param OrMask Mask value for 'or' operation
@retval EFI_SUCCESS The operation was executed successfully
**/
EFI_STATUS
BootScriptExecuteMemoryReadWrite (
IN UINT8 *Script,
IN UINT64 AndMask,
IN UINT64 OrMask
)
{
EFI_STATUS Status;
UINT64 Data;
EFI_BOOT_SCRIPT_MEM_READ_WRITE MemReadWrite;
Data = 0;
CopyMem((VOID*)&MemReadWrite, (VOID*)Script, sizeof(EFI_BOOT_SCRIPT_MEM_READ_WRITE));
DEBUG ((EFI_D_INFO, "BootScriptExecuteMemoryReadWrite - 0x%08x, 0x%016lx, 0x%016lx\n", (UINTN)MemReadWrite.Address, AndMask, OrMask));
Status = ScriptMemoryRead (
(S3_BOOT_SCRIPT_LIB_WIDTH) MemReadWrite.Width,
MemReadWrite.Address,
1,
&Data
);
if (!EFI_ERROR (Status)) {
Data = (Data & AndMask) | OrMask;
Status = ScriptMemoryWrite (
(S3_BOOT_SCRIPT_LIB_WIDTH) MemReadWrite.Width,
MemReadWrite.Address,
1,
&Data
);
}
return Status;
}
/**
Interprete the boot script node with EFI_BOOT_SCRIPT_PCI_CFG_READ_WRITE OP code.
@param Script The pointer of typed node in boot script table
@param AndMask Mask value for 'and' operation
@param OrMask Mask value for 'or' operation
@retval EFI_SUCCESS The operation was executed successfully
**/
EFI_STATUS
BootScriptExecutePciCfgReadWrite (
IN UINT8 *Script,
IN UINT64 AndMask,
IN UINT64 OrMask
)
{
EFI_STATUS Status;
UINT64 Data;
EFI_BOOT_SCRIPT_PCI_CONFIG_READ_WRITE PciCfgReadWrite;
Data = 0;
CopyMem((VOID*)&PciCfgReadWrite, (VOID*)Script, sizeof(EFI_BOOT_SCRIPT_PCI_CONFIG_READ_WRITE));
DEBUG ((EFI_D_INFO, "BootScriptExecutePciCfgReadWrite - 0x%08x, 0x%016lx, 0x%016lx\n", PCI_ADDRESS_ENCODE (PciCfgReadWrite.Address), AndMask, OrMask));
Status = ScriptPciCfgRead (
(S3_BOOT_SCRIPT_LIB_WIDTH) PciCfgReadWrite.Width,
PciCfgReadWrite.Address,
1,
&Data
);
if (EFI_ERROR (Status)) {
return Status;
}
Data = (Data & AndMask) | OrMask;
Status = ScriptPciCfgWrite (
(S3_BOOT_SCRIPT_LIB_WIDTH) PciCfgReadWrite.Width,
PciCfgReadWrite.Address,
1,
&Data
);
return Status;
}
/**
Interprete the boot script node with EFI_BOOT_SCRIPT_SMBUS_EXECUTE OP code.
@param Script The pointer of typed node in boot script table
@retval EFI_SUCCESS The operation was executed successfully
@retval EFI_UNSUPPORTED Cannot locate smbus ppi or occur error of script execution
@retval Others Result of script execution
**/
EFI_STATUS
BootScriptExecuteSmbusExecute (
IN UINT8 *Script
)
{
UINTN SmBusAddress;
UINTN DataSize;
EFI_BOOT_SCRIPT_SMBUS_EXECUTE SmbusExecuteEntry;
CopyMem ((VOID*)&SmbusExecuteEntry, (VOID*)Script, sizeof(EFI_BOOT_SCRIPT_SMBUS_EXECUTE ));
DEBUG ((EFI_D_INFO, "BootScriptExecuteSmbusExecute - 0x%08x, 0x%08x\n", (UINTN)SmbusExecuteEntry.SmBusAddress, (UINTN)SmbusExecuteEntry.Operation));
SmBusAddress = (UINTN)SmbusExecuteEntry.SmBusAddress;
DataSize = (UINTN) SmbusExecuteEntry.DataSize;
return SmbusExecute (
SmBusAddress,
(EFI_SMBUS_OPERATION) SmbusExecuteEntry.Operation,
&DataSize,
Script + sizeof (EFI_BOOT_SCRIPT_SMBUS_EXECUTE)
);
}
/**
Interprete the boot script node with EFI_BOOT_SCRIPT_STALL OP code.
@param Script The pointer of typed node in boot script table
@retval EFI_SUCCESS The operation was executed successfully
**/
EFI_STATUS
BootScriptExecuteStall (
IN UINT8 *Script
)
{
EFI_BOOT_SCRIPT_STALL Stall;
CopyMem ((VOID*)&Stall, (VOID*)Script, sizeof(EFI_BOOT_SCRIPT_STALL));
DEBUG ((EFI_D_INFO, "BootScriptExecuteStall - 0x%08x\n", (UINTN)Stall.Duration));
MicroSecondDelay ((UINTN) Stall.Duration);
return EFI_SUCCESS;
}
/**
Interprete the boot script node with EFI_BOOT_SCRIPT_DISPATCH OP code.
@param Script The pointer of typed node in boot script table
@retval EFI_SUCCESS The operation was executed successfully
**/
EFI_STATUS
BootScriptExecuteDispatch (
IN UINT8 *Script
)
{
EFI_STATUS Status;
DISPATCH_ENTRYPOINT_FUNC EntryFunc;
EFI_BOOT_SCRIPT_DISPATCH ScriptDispatch;
CopyMem ((VOID*)&ScriptDispatch, (VOID*)Script, sizeof(EFI_BOOT_SCRIPT_DISPATCH));
EntryFunc = (DISPATCH_ENTRYPOINT_FUNC) (UINTN) (ScriptDispatch.EntryPoint);
DEBUG ((EFI_D_INFO, "BootScriptExecuteDispatch - 0x%08x\n", (UINTN)ScriptDispatch.EntryPoint));
Status = EntryFunc (NULL, NULL);
return Status;
}
/**
Interprete the boot script node with EFI_BOOT_SCRIPT_DISPATCH_2 OP code.
@param Script The pointer of typed node in boot script table
@retval EFI_SUCCESS The operation was executed successfully
**/
EFI_STATUS
BootScriptExecuteDispatch2 (
IN UINT8 *Script
)
{
EFI_STATUS Status;
DISPATCH_ENTRYPOINT_FUNC EntryFunc;
EFI_BOOT_SCRIPT_DISPATCH_2 ScriptDispatch2;
CopyMem ((VOID*)&ScriptDispatch2, (VOID*)Script, sizeof(EFI_BOOT_SCRIPT_DISPATCH_2));
DEBUG ((EFI_D_INFO, "BootScriptExecuteDispatch2 - 0x%08x(0x%08x)\n", (UINTN)ScriptDispatch2.EntryPoint, (UINTN)ScriptDispatch2.Context));
EntryFunc = (DISPATCH_ENTRYPOINT_FUNC) (UINTN) (ScriptDispatch2.EntryPoint);
Status = EntryFunc (NULL, (VOID *) (UINTN) ScriptDispatch2.Context);
return Status;
}
/**
Interprete the boot script node with EFI_BOOT_SCRIPT_MEM_POLL OP code.
@param Script The pointer of typed node in boot script table
@param AndMask Mask value for 'and' operation
@param OrMask Mask value for 'or' operation
@retval EFI_DEVICE_ERROR Data polled from memory does not equal to
the epecting data within the Loop Times.
@retval EFI_SUCCESS The operation was executed successfully
**/
EFI_STATUS
BootScriptExecuteMemPoll (
IN UINT8 *Script,
IN UINT64 AndMask,
IN UINT64 OrMask
)
{
UINT64 Data;
UINT64 LoopTimes;
EFI_STATUS Status;
EFI_BOOT_SCRIPT_MEM_POLL MemPoll;
CopyMem ((VOID*)&MemPoll, (VOID*)Script, sizeof(EFI_BOOT_SCRIPT_MEM_POLL));
DEBUG ((EFI_D_INFO, "BootScriptExecuteMemPoll - 0x%08x, 0x%016lx, 0x%016lx\n", (UINTN)MemPoll.Address, AndMask, OrMask));
Data = 0;
Status = ScriptMemoryRead (
(S3_BOOT_SCRIPT_LIB_WIDTH) MemPoll.Width,
MemPoll.Address,
1,
&Data
);
if ((!EFI_ERROR (Status)) && (Data & AndMask) == OrMask) {
return EFI_SUCCESS;
}
for (LoopTimes = 0; LoopTimes < MemPoll.LoopTimes; LoopTimes++) {
MicroSecondDelay ((UINTN)MemPoll.Duration);
Data = 0;
Status = ScriptMemoryRead (
(S3_BOOT_SCRIPT_LIB_WIDTH) MemPoll.Width,
MemPoll.Address,
1,
&Data
);
if ((!EFI_ERROR (Status)) && (Data & AndMask) == OrMask) {
return EFI_SUCCESS;
}
}
if (LoopTimes < MemPoll.LoopTimes) {
return EFI_SUCCESS;
} else {
return EFI_DEVICE_ERROR;
}
}
/**
Execute the boot script to interpret the Store arbitrary information.
This opcode is a no-op on dispatch and is only used for debugging script issues.
@param Script The pointer of node in boot script table
**/
VOID
BootScriptExecuteInformation (
IN UINT8 *Script
)
{
UINT32 Index;
EFI_BOOT_SCRIPT_INFORMATION Information;
UINT8 *InformationData;
CopyMem ((VOID*)&Information, (VOID*)Script, sizeof(EFI_BOOT_SCRIPT_INFORMATION));
InformationData = Script + sizeof (EFI_BOOT_SCRIPT_INFORMATION);
DEBUG ((EFI_D_INFO, "BootScriptExecuteInformation - 0x%08x\n", (UINTN) InformationData));
DEBUG ((EFI_D_INFO, "BootScriptInformation: "));
for (Index = 0; Index < Information.InformationLength; Index++) {
DEBUG ((EFI_D_INFO, "%02x ", InformationData[Index]));
}
DEBUG ((EFI_D_INFO, "\n"));
}
/**
Execute the boot script to interpret the Label information.
@param Script The pointer of node in boot script table
**/
VOID
BootScriptExecuteLabel (
IN UINT8 *Script
)
{
UINT32 Index;
EFI_BOOT_SCRIPT_INFORMATION Information;
UINT8 *InformationData;
CopyMem ((VOID*)&Information, (VOID*)Script, sizeof(EFI_BOOT_SCRIPT_INFORMATION));
InformationData = Script + sizeof (EFI_BOOT_SCRIPT_INFORMATION);
DEBUG ((EFI_D_INFO, "BootScriptExecuteLabel - 0x%08x\n", (UINTN) InformationData));
DEBUG ((EFI_D_INFO, "BootScriptLabel: "));
for (Index = 0; Index < Information.InformationLength; Index++) {
DEBUG ((EFI_D_INFO, "%02x ", InformationData[Index]));
}
DEBUG ((EFI_D_INFO, "\n"));
}
/**
calculate the mask value for 'and' and 'or' operation
@param ScriptHeader The pointer of header of node in boot script table
@param AndMask The Mask value for 'and' operation
@param OrMask The Mask value for 'or' operation
@param Script Pointer to the entry.
**/
VOID
CheckAndOrMask (
IN EFI_BOOT_SCRIPT_COMMON_HEADER *ScriptHeader,
OUT UINT64 *AndMask,
OUT UINT64 *OrMask,
IN UINT8 *Script
)
{
UINT8 *DataPtr;
UINTN Size;
switch (ScriptHeader->OpCode) {
case EFI_BOOT_SCRIPT_IO_READ_WRITE_OPCODE:
Size = sizeof (EFI_BOOT_SCRIPT_IO_READ_WRITE);
break;
case EFI_BOOT_SCRIPT_MEM_READ_WRITE_OPCODE:
Size = sizeof (EFI_BOOT_SCRIPT_MEM_READ_WRITE);
break;
case EFI_BOOT_SCRIPT_PCI_CONFIG_READ_WRITE_OPCODE:
Size = sizeof (EFI_BOOT_SCRIPT_PCI_CONFIG_READ_WRITE);
break;
case EFI_BOOT_SCRIPT_MEM_POLL_OPCODE:
Size = sizeof (EFI_BOOT_SCRIPT_MEM_POLL);
break;
case EFI_BOOT_SCRIPT_IO_POLL_OPCODE:
Size = sizeof (EFI_BOOT_SCRIPT_IO_POLL);
break;
case EFI_BOOT_SCRIPT_PCI_CONFIG2_READ_WRITE_OPCODE:
Size = sizeof (EFI_BOOT_SCRIPT_PCI_CONFIG2_READ_WRITE);
break;
case EFI_BOOT_SCRIPT_PCI_CONFIG2_POLL_OPCODE:
Size = sizeof (EFI_BOOT_SCRIPT_PCI_CONFIG2_POLL);
break;
case EFI_BOOT_SCRIPT_PCI_CONFIG_POLL_OPCODE:
Size = sizeof (EFI_BOOT_SCRIPT_PCI_CONFIG_POLL);
break;
default:
return;
}
DataPtr = Script + Size;
switch (ScriptHeader->Width) {
case S3BootScriptWidthUint8:
*AndMask = (UINT64) (*(UINT8*) (DataPtr + 1));
*OrMask = (UINT64) (*DataPtr);
break;
case S3BootScriptWidthUint16:
*AndMask = (UINT64) (*(UINT16 *) (DataPtr + 2));
*OrMask = (UINT64) (*(UINT16 *) DataPtr);
break;
case S3BootScriptWidthUint32:
*AndMask = (UINT64) (*(UINT32 *) (DataPtr + 4));
*OrMask = (UINT64) (*(UINT32 *) DataPtr);
break;
case S3BootScriptWidthUint64:
*AndMask = (UINT64) (*(UINT64 *) (DataPtr + 8));
*OrMask = (UINT64) (*(UINT64 *) DataPtr);
break;
default:
break;
}
return;
}
/**
Interprete the boot script node with EFI_BOOT_SCRIPT_IO_POLL OP code.
@param Script The pointer of typed node in boot script table
@param AndMask Mask value for 'and' operation
@param OrMask Mask value for 'or' operation
@retval EFI_DEVICE_ERROR Data polled from memory does not equal to
the epecting data within the Loop Times.
@retval EFI_SUCCESS The operation was executed successfully
**/
EFI_STATUS
BootScriptExecuteIoPoll (
IN UINT8 *Script,
IN UINT64 AndMask,
IN UINT64 OrMask
)
{
EFI_STATUS Status;
UINT64 Data;
UINT64 LoopTimes;
EFI_BOOT_SCRIPT_IO_POLL IoPoll;
CopyMem ((VOID*)&IoPoll, (VOID*)Script, sizeof(EFI_BOOT_SCRIPT_IO_POLL));
DEBUG ((EFI_D_INFO, "BootScriptExecuteIoPoll - 0x%08x, 0x%016lx, 0x%016lx\n", (UINTN)IoPoll.Address, AndMask, OrMask));
Data = 0;
Status = ScriptIoRead (
(S3_BOOT_SCRIPT_LIB_WIDTH) IoPoll.Width,
IoPoll.Address,
1,
&Data
);
if ((!EFI_ERROR (Status)) && (Data & AndMask) == OrMask) {
return EFI_SUCCESS;
}
for (LoopTimes = 0; LoopTimes < IoPoll.Delay; LoopTimes++) {
NanoSecondDelay (100);
Data = 0;
Status = ScriptIoRead (
(S3_BOOT_SCRIPT_LIB_WIDTH) IoPoll.Width,
IoPoll.Address,
1,
&Data
);
if ((!EFI_ERROR (Status)) &&(Data & AndMask) == OrMask) {
return EFI_SUCCESS;
}
}
if (LoopTimes < IoPoll.Delay) {
return EFI_SUCCESS;
} else {
return EFI_DEVICE_ERROR;
}
}
/**
Interprete the boot script node with EFI_BOOT_SCRIPT_PCI_CONFIG2_WRITE OP code.
@param Script The pointer of S3 boot script
@retval EFI_SUCCESS The operation was executed successfully
**/
EFI_STATUS
BootScriptExecutePciCfg2Write (
IN UINT8 *Script
)
{
VOID *Buffer;
S3_BOOT_SCRIPT_LIB_WIDTH Width;
UINT16 Segment;
UINT64 Address;
UINTN Count;
EFI_BOOT_SCRIPT_PCI_CONFIG2_WRITE PciCfg2Write;
CopyMem ((VOID*)&PciCfg2Write, (VOID*)Script, sizeof(EFI_BOOT_SCRIPT_PCI_CONFIG2_WRITE));
Width = (S3_BOOT_SCRIPT_LIB_WIDTH)PciCfg2Write.Width;
Segment = PciCfg2Write.Segment;
Address = PciCfg2Write.Address;
Count = PciCfg2Write.Count;
Buffer = Script + sizeof(EFI_BOOT_SCRIPT_PCI_CONFIG2_WRITE);
DEBUG ((EFI_D_INFO, "BootScriptExecutePciCfg2Write - 0x%04x, 0x%08x, 0x%08x, 0x%08x\n", Segment, PCI_ADDRESS_ENCODE (Address), Count, (UINTN)Width));
return ScriptPciCfg2Write (Width, Segment, Address, Count, Buffer);
}
/**
Interprete the boot script node with EFI_BOOT_SCRIPT_PCI_CONFIG2_READ_WRITE OP code.
@param Script The pointer of S3 boot script
@param AndMask Mask value for 'and' operation
@param OrMask Mask value for 'or' operation
@retval EFI_SUCCESS The operation was executed successfully
**/
EFI_STATUS
BootScriptExecutePciCfg2ReadWrite (
IN UINT8 *Script,
IN UINT64 AndMask,
IN UINT64 OrMask
)
{
UINT64 Data;
EFI_STATUS Status;
EFI_BOOT_SCRIPT_PCI_CONFIG2_READ_WRITE PciCfg2ReadWrite;
Data = 0;
CopyMem ((VOID*)&PciCfg2ReadWrite, (VOID*)Script, sizeof(EFI_BOOT_SCRIPT_PCI_CONFIG2_READ_WRITE));
DEBUG ((EFI_D_INFO, "BootScriptExecutePciCfg2ReadWrite - 0x%04x, 0x%08x, 0x%016lx, 0x%016lx\n", PciCfg2ReadWrite.Segment, PCI_ADDRESS_ENCODE (PciCfg2ReadWrite.Address), AndMask, OrMask));
Status = ScriptPciCfg2Read (
(S3_BOOT_SCRIPT_LIB_WIDTH) PciCfg2ReadWrite.Width,
PciCfg2ReadWrite.Segment,
PciCfg2ReadWrite.Address,
1,
&Data
);
if (EFI_ERROR (Status)) {
return Status;
}
Data = (Data & AndMask) | OrMask;
Status = ScriptPciCfg2Write (
(S3_BOOT_SCRIPT_LIB_WIDTH) PciCfg2ReadWrite.Width,
PciCfg2ReadWrite.Segment,
PciCfg2ReadWrite.Address,
1,
&Data
);
return Status;
}
/**
Interprete the boot script node with EFI_BOOT_SCRIPT_PCI_CONFIG_POLL OP code.
@param Script The pointer of S3 boot script
@param AndMask Mask value for 'and' operation
@param OrMask Mask value for 'or' operation
@retval EFI_SUCCESS The operation was executed successfully
@retval EFI_DEVICE_ERROR Data polled from Pci configuration space does not equal to
epecting data within the Loop Times.
**/
EFI_STATUS
BootScriptPciCfgPoll (
IN UINT8 *Script,
IN UINT64 AndMask,
IN UINT64 OrMask
)
{
UINT64 Data;
UINT64 LoopTimes;
EFI_STATUS Status;
EFI_BOOT_SCRIPT_PCI_CONFIG_POLL PciCfgPoll;
CopyMem ((VOID*)&PciCfgPoll, (VOID*)Script, sizeof(EFI_BOOT_SCRIPT_PCI_CONFIG_POLL));
DEBUG ((EFI_D_INFO, "BootScriptPciCfgPoll - 0x%08x, 0x%016lx, 0x%016lx\n", PCI_ADDRESS_ENCODE (PciCfgPoll.Address), AndMask, OrMask));
Data = 0;
Status = ScriptPciCfgRead (
(S3_BOOT_SCRIPT_LIB_WIDTH) PciCfgPoll.Width,
PciCfgPoll.Address,
1,
&Data
);
if ((!EFI_ERROR (Status)) &&(Data & AndMask) == OrMask) {
return EFI_SUCCESS;
}
for (LoopTimes = 0; LoopTimes < PciCfgPoll.Delay; LoopTimes++) {
NanoSecondDelay (100);
Data = 0;
Status = ScriptPciCfgRead (
(S3_BOOT_SCRIPT_LIB_WIDTH) PciCfgPoll.Width,
PciCfgPoll.Address,
1,
&Data
);
if ((!EFI_ERROR (Status)) &&
(Data & AndMask) == OrMask) {
return EFI_SUCCESS;
}
}
if (LoopTimes < PciCfgPoll.Delay) {
return EFI_SUCCESS;
} else {
return EFI_DEVICE_ERROR;
}
}
/**
Interprete the boot script node with EFI_BOOT_SCRIPT_PCI_CONFIG2_POLL OP code.
@param Script The pointer of S3 Boot Script
@param AndMask Mask value for 'and' operation
@param OrMask Mask value for 'or' operation
@retval EFI_SUCCESS The operation was executed successfully
@retval EFI_DEVICE_ERROR Data polled from Pci configuration space does not equal to
epecting data within the Loop Times.
**/
EFI_STATUS
BootScriptPciCfg2Poll (
IN UINT8 *Script,
IN UINT64 AndMask,
IN UINT64 OrMask
)
{
EFI_STATUS Status;
UINT64 Data;
UINT64 LoopTimes;
EFI_BOOT_SCRIPT_PCI_CONFIG2_POLL PciCfg2Poll;
Data = 0;
CopyMem ((VOID*)&PciCfg2Poll, (VOID*)Script, sizeof(EFI_BOOT_SCRIPT_PCI_CONFIG2_POLL));
DEBUG ((EFI_D_INFO, "BootScriptPciCfg2Poll - 0x%04x, 0x%08x, 0x%016lx, 0x%016lx\n", PciCfg2Poll.Segment, PCI_ADDRESS_ENCODE (PciCfg2Poll.Address), AndMask, OrMask));
Status = ScriptPciCfg2Read (
(S3_BOOT_SCRIPT_LIB_WIDTH) PciCfg2Poll.Width,
PciCfg2Poll.Segment,
PciCfg2Poll.Address,
1,
&Data
);
if ((!EFI_ERROR (Status)) && (Data & AndMask) == OrMask) {
return EFI_SUCCESS;
}
for (LoopTimes = 0; LoopTimes < PciCfg2Poll.Delay; LoopTimes++) {
NanoSecondDelay (100);
Data = 0;
Status = ScriptPciCfg2Read (
(S3_BOOT_SCRIPT_LIB_WIDTH) PciCfg2Poll.Width,
PciCfg2Poll.Segment,
PciCfg2Poll.Address,
1,
&Data
);
if ((!EFI_ERROR (Status)) && (Data & AndMask) == OrMask) {
return EFI_SUCCESS;
}
}
if (LoopTimes < PciCfg2Poll.Delay) {
return EFI_SUCCESS;
} else {
return EFI_DEVICE_ERROR;
}
}
/**
Executes the S3 boot script table.
@retval RETURN_SUCCESS The boot script table was executed successfully.
@retval RETURN_UNSUPPORTED Invalid script table or opcode.
@note A known Limitations in the implementation: When interpreting the opcode EFI_BOOT_SCRIPT_PCI_CONFIG2_WRITE_OPCODE
EFI_BOOT_SCRIPT_PCI_CONFIG2_READ_WRITE_OPCODE and EFI_BOOT_SCRIPT_PCI_CONFIG2_POLL_OPCODE, the 'Segment' parameter is assumed as
Zero, or else, assert.
**/
RETURN_STATUS
EFIAPI
S3BootScriptExecute (
VOID
)
{
EFI_STATUS Status;
UINT8* Script;
UINTN StartAddress;
UINT32 TableLength;
UINT64 AndMask;
UINT64 OrMask;
EFI_BOOT_SCRIPT_COMMON_HEADER ScriptHeader;
EFI_BOOT_SCRIPT_TABLE_HEADER TableHeader;
Script = mS3BootScriptTablePtr->TableBase;
if (Script != 0) {
CopyMem ((VOID*)&TableHeader, Script, sizeof(EFI_BOOT_SCRIPT_TABLE_HEADER));
} else {
return EFI_INVALID_PARAMETER;
}
DEBUG ((EFI_D_INFO, "S3BootScriptExecute:\n"));
if (TableHeader.OpCode != S3_BOOT_SCRIPT_LIB_TABLE_OPCODE) {
return EFI_UNSUPPORTED;
}
DEBUG ((EFI_D_INFO, "TableHeader - 0x%08x\n", Script));
StartAddress = (UINTN) Script;
TableLength = TableHeader.TableLength;
Script = Script + TableHeader.Length;
Status = EFI_SUCCESS;
AndMask = 0;
OrMask = 0;
DEBUG ((EFI_D_INFO, "TableHeader.Version - 0x%04x\n", (UINTN)TableHeader.Version));
DEBUG ((EFI_D_INFO, "TableHeader.TableLength - 0x%08x\n", (UINTN)TableLength));
while ((UINTN) Script < (UINTN) (StartAddress + TableLength)) {
DEBUG ((EFI_D_INFO, "ExecuteBootScript - %08x\n", (UINTN)Script));
CopyMem ((VOID*)&ScriptHeader, Script, sizeof(EFI_BOOT_SCRIPT_COMMON_HEADER));
switch (ScriptHeader.OpCode) {
case EFI_BOOT_SCRIPT_MEM_WRITE_OPCODE:
DEBUG ((EFI_D_INFO, "EFI_BOOT_SCRIPT_MEM_WRITE_OPCODE\n"));
Status = BootScriptExecuteMemoryWrite (Script);
break;
case EFI_BOOT_SCRIPT_MEM_READ_WRITE_OPCODE:
DEBUG ((EFI_D_INFO, "EFI_BOOT_SCRIPT_MEM_READ_WRITE_OPCODE\n"));
CheckAndOrMask (&ScriptHeader, &AndMask, &OrMask, Script);
Status = BootScriptExecuteMemoryReadWrite (
Script,
AndMask,
OrMask
);
break;
case EFI_BOOT_SCRIPT_IO_WRITE_OPCODE:
DEBUG ((EFI_D_INFO, "EFI_BOOT_SCRIPT_IO_WRITE_OPCODE\n"));
Status = BootScriptExecuteIoWrite (Script);
break;
case EFI_BOOT_SCRIPT_PCI_CONFIG_WRITE_OPCODE:
DEBUG ((EFI_D_INFO, "EFI_BOOT_SCRIPT_PCI_CONFIG_WRITE_OPCODE\n"));
Status = BootScriptExecutePciCfgWrite (Script);
break;
case EFI_BOOT_SCRIPT_PCI_CONFIG_READ_WRITE_OPCODE:
DEBUG ((EFI_D_INFO, "EFI_BOOT_SCRIPT_PCI_CONFIG_READ_WRITE_OPCODE\n"));
CheckAndOrMask (&ScriptHeader, &AndMask, &OrMask, Script);
Status = BootScriptExecutePciCfgReadWrite (
Script,
AndMask,
OrMask
);
break;
case EFI_BOOT_SCRIPT_PCI_CONFIG2_WRITE_OPCODE:
DEBUG ((EFI_D_INFO, "EFI_BOOT_SCRIPT_PCI_CONFIG2_WRITE_OPCODE\n"));
Status = BootScriptExecutePciCfg2Write (Script);
break;
case EFI_BOOT_SCRIPT_PCI_CONFIG2_READ_WRITE_OPCODE:
DEBUG ((EFI_D_INFO, "EFI_BOOT_SCRIPT_PCI_CONFIG2_READ_WRITE_OPCODE\n"));
CheckAndOrMask (&ScriptHeader, &AndMask, &OrMask, Script);
Status = BootScriptExecutePciCfg2ReadWrite (
Script,
AndMask,
OrMask
);
break;
case EFI_BOOT_SCRIPT_DISPATCH_OPCODE:
DEBUG ((EFI_D_INFO, "EFI_BOOT_SCRIPT_DISPATCH_OPCODE\n"));
Status = BootScriptExecuteDispatch (Script);
break;
case EFI_BOOT_SCRIPT_DISPATCH_2_OPCODE:
DEBUG ((EFI_D_INFO, "EFI_BOOT_SCRIPT_DISPATCH_2_OPCODE\n"));
Status = BootScriptExecuteDispatch2 (Script);
break;
case EFI_BOOT_SCRIPT_INFORMATION_OPCODE:
DEBUG ((EFI_D_INFO, "EFI_BOOT_SCRIPT_INFORMATION_OPCODE\n"));
BootScriptExecuteInformation (Script);
break;
case S3_BOOT_SCRIPT_LIB_TERMINATE_OPCODE:
DEBUG ((EFI_D_INFO, "S3_BOOT_SCRIPT_LIB_TERMINATE_OPCODE\n"));
DEBUG ((EFI_D_INFO, "S3BootScriptDone - %r\n", EFI_SUCCESS));
return EFI_SUCCESS;
case EFI_BOOT_SCRIPT_IO_READ_WRITE_OPCODE:
DEBUG ((EFI_D_INFO, "EFI_BOOT_SCRIPT_IO_READ_WRITE_OPCODE\n"));
CheckAndOrMask (&ScriptHeader, &AndMask, &OrMask, Script);
Status = BootScriptExecuteIoReadWrite (
Script,
AndMask,
OrMask
);
break;
case EFI_BOOT_SCRIPT_SMBUS_EXECUTE_OPCODE:
DEBUG ((EFI_D_INFO, "EFI_BOOT_SCRIPT_SMBUS_EXECUTE_OPCODE\n"));
Status = BootScriptExecuteSmbusExecute (Script);
break;
case EFI_BOOT_SCRIPT_STALL_OPCODE:
DEBUG ((EFI_D_INFO, "EFI_BOOT_SCRIPT_STALL_OPCODE\n"));
Status = BootScriptExecuteStall (Script);
break;
case EFI_BOOT_SCRIPT_MEM_POLL_OPCODE:
DEBUG ((EFI_D_INFO, "EFI_BOOT_SCRIPT_MEM_POLL_OPCODE\n"));
CheckAndOrMask (&ScriptHeader, &AndMask, &OrMask, Script);
Status = BootScriptExecuteMemPoll (Script, AndMask, OrMask);
break;
case EFI_BOOT_SCRIPT_IO_POLL_OPCODE:
DEBUG ((EFI_D_INFO, "EFI_BOOT_SCRIPT_IO_POLL_OPCODE\n"));
CheckAndOrMask (&ScriptHeader, &AndMask, &OrMask, Script);
Status = BootScriptExecuteIoPoll (Script, AndMask, OrMask);
break;
case EFI_BOOT_SCRIPT_PCI_CONFIG_POLL_OPCODE:
DEBUG ((EFI_D_INFO, "EFI_BOOT_SCRIPT_PCI_CONFIG_POLL_OPCODE\n"));
CheckAndOrMask (&ScriptHeader, &AndMask, &OrMask, Script);
Status = BootScriptPciCfgPoll (Script, AndMask, OrMask);
break;
case EFI_BOOT_SCRIPT_PCI_CONFIG2_POLL_OPCODE:
DEBUG ((EFI_D_INFO, "EFI_BOOT_SCRIPT_PCI_CONFIG2_POLL_OPCODE\n"));
CheckAndOrMask (&ScriptHeader, &AndMask, &OrMask, Script);
Status = BootScriptPciCfg2Poll (Script, AndMask, OrMask);
break;
case S3_BOOT_SCRIPT_LIB_LABEL_OPCODE:
//
// For label
//
DEBUG ((EFI_D_INFO, "S3_BOOT_SCRIPT_LIB_LABEL_OPCODE\n"));
BootScriptExecuteLabel (Script);
break;
default:
DEBUG ((EFI_D_INFO, "S3BootScriptDone - %r\n", EFI_UNSUPPORTED));
return EFI_UNSUPPORTED;
}
if (EFI_ERROR (Status)) {
DEBUG ((EFI_D_INFO, "S3BootScriptDone - %r\n", Status));
return Status;
}
Script = Script + ScriptHeader.Length;
}
DEBUG ((EFI_D_INFO, "S3BootScriptDone - %r\n", Status));
return Status;
}