audk/MdeModulePkg/Universal/Network/SnpDxe/Snp.c

1001 lines
28 KiB
C

/** @file
Copyright (c) 2004 - 2005, Intel Corporation
All rights reserved. This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
Module name:
snp.c
Abstract:
**/
#include "Snp.h"
EFI_STATUS
pxe_start (
SNP_DRIVER *snp
);
EFI_STATUS
pxe_stop (
SNP_DRIVER *snp
);
EFI_STATUS
pxe_init (
SNP_DRIVER *snp,
UINT16 OpFlags
);
EFI_STATUS
pxe_shutdown (
SNP_DRIVER *snp
);
EFI_STATUS
pxe_get_stn_addr (
SNP_DRIVER *snp
);
EFI_STATUS
EFIAPI
InitializeSnpNiiDriver (
IN EFI_HANDLE image_handle,
IN EFI_SYSTEM_TABLE *system_table
);
EFI_STATUS
EFIAPI
SimpleNetworkDriverSupported (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE Controller,
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
);
EFI_STATUS
EFIAPI
SimpleNetworkDriverStart (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE Controller,
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
);
EFI_STATUS
EFIAPI
SimpleNetworkDriverStop (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE Controller,
IN UINTN NumberOfChildren,
IN EFI_HANDLE *ChildHandleBuffer
);
//
// Simple Network Protocol Driver Global Variables
//
EFI_DRIVER_BINDING_PROTOCOL mSimpleNetworkDriverBinding = {
SimpleNetworkDriverSupported,
SimpleNetworkDriverStart,
SimpleNetworkDriverStop,
0xa,
NULL,
NULL
};
//
// Module global variables needed to support undi 3.0 interface
//
EFI_PCI_IO_PROTOCOL *mPciIoFncs;
struct s_v2p *_v2p = NULL; // undi3.0 map_list head
// End Global variables
//
/**
This routine maps the given CPU address to a Device address. It creates a
an entry in the map list with the virtual and physical addresses and the
un map cookie.
@param v2p pointer to return a map list node pointer.
@param type the direction in which the data flows from the given
virtual address device->cpu or cpu->device or both
ways.
@param vaddr virtual address (or CPU address) to be mapped
@param bsize size of the buffer to be mapped.
@retval EFI_SUCEESS routine has completed the mapping
@retval other error as indicated.
**/
EFI_STATUS
add_v2p (
IN OUT struct s_v2p **v2p,
EFI_PCI_IO_PROTOCOL_OPERATION type,
VOID *vaddr,
UINTN bsize
)
{
EFI_STATUS Status;
if ((v2p == NULL) || (vaddr == NULL) || (bsize == 0)) {
return EFI_INVALID_PARAMETER;
}
*v2p = AllocatePool (sizeof (struct s_v2p));
if (*v2p != NULL) {
return EFI_OUT_OF_RESOURCES;
}
Status = mPciIoFncs->Map (
mPciIoFncs,
type,
vaddr,
&bsize,
&(*v2p)->paddr,
&(*v2p)->unmap
);
if (Status != EFI_SUCCESS) {
FreePool (*v2p);
return Status;
}
(*v2p)->vaddr = vaddr;
(*v2p)->bsize = bsize;
(*v2p)->next = _v2p;
_v2p = *v2p;
return EFI_SUCCESS;
}
/**
This routine searches the linked list of mapped address nodes (for undi3.0
interface) to find the node that corresponds to the given virtual address and
returns a pointer to that node.
@param v2p pointer to return a map list node pointer.
@param vaddr virtual address (or CPU address) to be searched in
the map list
@retval EFI_SUCEESS if a match found!
@retval Other match not found
**/
EFI_STATUS
find_v2p (
struct s_v2p **v2p,
VOID *vaddr
)
{
struct s_v2p *v;
if (v2p == NULL || vaddr == NULL) {
return EFI_INVALID_PARAMETER;
}
for (v = _v2p; v != NULL; v = v->next) {
if (v->vaddr == vaddr) {
*v2p = v;
return EFI_SUCCESS;
}
}
return EFI_NOT_FOUND;
}
/**
This routine unmaps the given virtual address and frees the memory allocated
for the map list node corresponding to that address.
@param vaddr virtual address (or CPU address) to be unmapped
@retval EFI_SUCEESS if successfully unmapped
@retval Other as indicated by the error
**/
EFI_STATUS
del_v2p (
VOID *vaddr
)
{
struct s_v2p *v;
struct s_v2p *t;
EFI_STATUS Status;
if (vaddr == NULL) {
return EFI_INVALID_PARAMETER;
}
if (_v2p == NULL) {
return EFI_NOT_FOUND;
}
//
// Is our node at the head of the list??
//
if ((v = _v2p)->vaddr == vaddr) {
_v2p = _v2p->next;
Status = mPciIoFncs->Unmap (mPciIoFncs, v->unmap);
FreePool (v);
if (Status) {
DEBUG ((EFI_D_ERROR, "Unmap failed with status = %x\n", Status));
}
return Status;
}
for (; v->next != NULL; v = t) {
if ((t = v->next)->vaddr == vaddr) {
v->next = t->next;
Status = mPciIoFncs->Unmap (mPciIoFncs, t->unmap);
FreePool (t);
if (Status) {
DEBUG ((EFI_D_ERROR, "Unmap failed with status = %x\n", Status));
}
return Status;
}
}
return EFI_NOT_FOUND;
}
STATIC
EFI_STATUS
issue_hwundi_command (
UINT64 cdb
)
/*++
Routine Description:
Arguments:
Returns:
--*/
{
DEBUG ((EFI_D_ERROR, "\nissue_hwundi_command() - This should not be called!"));
if (cdb == 0) {
return EFI_INVALID_PARAMETER;
}
//
// %%TBD - For now, nothing is done.
//
return EFI_UNSUPPORTED;
}
/**
Compute 8-bit checksum of a buffer.
@param ptr Pointer to buffer.
@param len Length of buffer in bytes.
@return 8-bit checksum of all bytes in buffer.
@return If ptr is NULL or len is zero, zero is returned.
**/
STATIC
UINT8
calc_8bit_cksum (
VOID *ptr,
UINTN len
)
{
UINT8 *bptr;
UINT8 cksum;
bptr = ptr;
cksum = 0;
if (ptr == NULL || len == 0) {
return 0;
}
while (len--) {
cksum = (UINT8) (cksum +*bptr++);
}
return cksum;
}
/**
Test to see if this driver supports Controller. Any Controller
that contains a Nii protocol can be supported.
@param This Protocol instance pointer.
@param Controller Handle of device to test.
@param RemainingDevicePath Not used.
@retval EFI_SUCCESS This driver supports this device.
@retval EFI_ALREADY_STARTED This driver is already running on this device.
@retval other This driver does not support this device.
**/
EFI_STATUS
EFIAPI
SimpleNetworkDriverSupported (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE Controller,
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
)
{
EFI_STATUS Status;
EFI_NETWORK_INTERFACE_IDENTIFIER_PROTOCOL *NiiProtocol;
PXE_UNDI *pxe;
Status = gBS->OpenProtocol (
Controller,
&gEfiDevicePathProtocolGuid,
NULL,
This->DriverBindingHandle,
Controller,
EFI_OPEN_PROTOCOL_TEST_PROTOCOL
);
if (EFI_ERROR (Status)) {
return Status;
}
Status = gBS->OpenProtocol (
Controller,
&gEfiNetworkInterfaceIdentifierProtocolGuid_31,
(VOID **) &NiiProtocol,
This->DriverBindingHandle,
Controller,
EFI_OPEN_PROTOCOL_BY_DRIVER
);
if (EFI_ERROR (Status)) {
if (Status == EFI_ALREADY_STARTED) {
DEBUG ((EFI_D_INFO, "Support(): Already Started. on handle %x\n", Controller));
}
return Status;
}
DEBUG ((EFI_D_INFO, "Support(): UNDI3.1 found on handle %x\n", Controller));
//
// check the version, we don't want to connect to the undi16
//
if (NiiProtocol->Type != EfiNetworkInterfaceUndi) {
Status = EFI_UNSUPPORTED;
goto Done;
}
//
// Check to see if !PXE structure is valid. Paragraph alignment of !PXE structure is required.
//
if (NiiProtocol->ID & 0x0F) {
DEBUG ((EFI_D_NET, "\n!PXE structure is not paragraph aligned.\n"));
Status = EFI_UNSUPPORTED;
goto Done;
}
pxe = (PXE_UNDI *) (UINTN) (NiiProtocol->ID);
//
// Verify !PXE revisions.
//
if (pxe->hw.Signature != PXE_ROMID_SIGNATURE) {
DEBUG ((EFI_D_NET, "\n!PXE signature is not valid.\n"));
Status = EFI_UNSUPPORTED;
goto Done;
}
if (pxe->hw.Rev < PXE_ROMID_REV) {
DEBUG ((EFI_D_NET, "\n!PXE.Rev is not supported.\n"));
Status = EFI_UNSUPPORTED;
goto Done;
}
if (pxe->hw.MajorVer < PXE_ROMID_MAJORVER) {
DEBUG ((EFI_D_NET, "\n!PXE.MajorVer is not supported.\n"));
Status = EFI_UNSUPPORTED;
goto Done;
} else if (pxe->hw.MajorVer == PXE_ROMID_MAJORVER && pxe->hw.MinorVer < PXE_ROMID_MINORVER) {
DEBUG ((EFI_D_NET, "\n!PXE.MinorVer is not supported."));
Status = EFI_UNSUPPORTED;
goto Done;
}
//
// Do S/W UNDI specific checks.
//
if ((pxe->hw.Implementation & PXE_ROMID_IMP_HW_UNDI) == 0) {
if (pxe->sw.EntryPoint < pxe->sw.Len) {
DEBUG ((EFI_D_NET, "\n!PXE S/W entry point is not valid."));
Status = EFI_UNSUPPORTED;
goto Done;
}
if (pxe->sw.BusCnt == 0) {
DEBUG ((EFI_D_NET, "\n!PXE.BusCnt is zero."));
Status = EFI_UNSUPPORTED;
goto Done;
}
}
Status = EFI_SUCCESS;
DEBUG ((EFI_D_INFO, "Support(): supported on %x\n", Controller));
Done:
gBS->CloseProtocol (
Controller,
&gEfiNetworkInterfaceIdentifierProtocolGuid_31,
This->DriverBindingHandle,
Controller
);
return Status;
}
/**
called for any handle that we said "supported" in the above call!
@param This Protocol instance pointer.
@param Controller Handle of device to start
@param RemainingDevicePath Not used.
@retval EFI_SUCCESS This driver supports this device.
@retval other This driver failed to start this device.
**/
EFI_STATUS
EFIAPI
SimpleNetworkDriverStart (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE Controller,
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
)
{
EFI_NETWORK_INTERFACE_IDENTIFIER_PROTOCOL *Nii;
EFI_DEVICE_PATH_PROTOCOL *NiiDevicePath;
EFI_STATUS Status;
PXE_UNDI *pxe;
SNP_DRIVER *snp;
VOID *addr;
EFI_HANDLE Handle;
PXE_PCI_CONFIG_INFO ConfigInfo;
PCI_TYPE00 *ConfigHeader;
UINT32 *TempBar;
UINT8 BarIndex;
PXE_STATFLAGS InitStatFlags;
DEBUG ((EFI_D_NET, "\nSnpNotifyNetworkInterfaceIdentifier() "));
Status = gBS->OpenProtocol (
Controller,
&gEfiDevicePathProtocolGuid,
(VOID **) &NiiDevicePath,
This->DriverBindingHandle,
Controller,
EFI_OPEN_PROTOCOL_BY_DRIVER
);
if (EFI_ERROR (Status)) {
return Status;
}
Status = gBS->LocateDevicePath (
&gEfiPciIoProtocolGuid,
&NiiDevicePath,
&Handle
);
if (EFI_ERROR (Status)) {
return Status;
}
Status = gBS->OpenProtocol (
Handle,
&gEfiPciIoProtocolGuid,
(VOID **) &mPciIoFncs,
This->DriverBindingHandle,
Controller,
EFI_OPEN_PROTOCOL_GET_PROTOCOL
);
if (EFI_ERROR (Status)) {
return Status;
}
//
// Get the NII interface.
//
Status = gBS->OpenProtocol (
Controller,
&gEfiNetworkInterfaceIdentifierProtocolGuid_31,
(VOID **) &Nii,
This->DriverBindingHandle,
Controller,
EFI_OPEN_PROTOCOL_BY_DRIVER
);
if (EFI_ERROR (Status)) {
gBS->CloseProtocol (
Controller,
&gEfiDevicePathProtocolGuid,
This->DriverBindingHandle,
Controller
);
return Status;
}
DEBUG ((EFI_D_INFO, "Start(): UNDI3.1 found\n"));
pxe = (PXE_UNDI *) (UINTN) (Nii->ID);
if (calc_8bit_cksum (pxe, pxe->hw.Len) != 0) {
DEBUG ((EFI_D_NET, "\n!PXE checksum is not correct.\n"));
goto NiiError;
}
if ((pxe->hw.Implementation & PXE_ROMID_IMP_PROMISCUOUS_RX_SUPPORTED) != 0) {
//
// We can get any packets.
//
} else if ((pxe->hw.Implementation & PXE_ROMID_IMP_BROADCAST_RX_SUPPORTED) != 0) {
//
// We need to be able to get broadcast packets for DHCP.
// If we do not have promiscuous support, we must at least have
// broadcast support or we cannot do DHCP!
//
} else {
DEBUG ((EFI_D_NET, "\nUNDI does not have promiscuous or broadcast support."));
goto NiiError;
}
//
// OK, we like this UNDI, and we know snp is not already there on this handle
// Allocate and initialize a new simple network protocol structure.
//
Status = mPciIoFncs->AllocateBuffer (
mPciIoFncs,
AllocateAnyPages,
EfiBootServicesData,
SNP_MEM_PAGES (sizeof (SNP_DRIVER)),
&addr,
0
);
if (Status != EFI_SUCCESS) {
DEBUG ((EFI_D_NET, "\nCould not allocate SNP_DRIVER structure.\n"));
goto NiiError;
}
snp = (SNP_DRIVER *) (UINTN) addr;
ZeroMem (snp, sizeof (SNP_DRIVER));
snp->IoFncs = mPciIoFncs;
snp->Signature = SNP_DRIVER_SIGNATURE;
EfiInitializeLock (&snp->lock, TPL_NOTIFY);
snp->snp.Revision = EFI_SIMPLE_NETWORK_PROTOCOL_REVISION;
snp->snp.Start = snp_undi32_start;
snp->snp.Stop = snp_undi32_stop;
snp->snp.Initialize = snp_undi32_initialize;
snp->snp.Reset = snp_undi32_reset;
snp->snp.Shutdown = snp_undi32_shutdown;
snp->snp.ReceiveFilters = snp_undi32_receive_filters;
snp->snp.StationAddress = snp_undi32_station_address;
snp->snp.Statistics = snp_undi32_statistics;
snp->snp.MCastIpToMac = snp_undi32_mcast_ip_to_mac;
snp->snp.NvData = snp_undi32_nvdata;
snp->snp.GetStatus = snp_undi32_get_status;
snp->snp.Transmit = snp_undi32_transmit;
snp->snp.Receive = snp_undi32_receive;
snp->snp.WaitForPacket = NULL;
snp->snp.Mode = &snp->mode;
snp->tx_rx_bufsize = 0;
snp->tx_rx_buffer = NULL;
snp->if_num = Nii->IfNum;
if ((pxe->hw.Implementation & PXE_ROMID_IMP_HW_UNDI) != 0) {
snp->is_swundi = FALSE;
snp->issue_undi32_command = &issue_hwundi_command;
} else {
snp->is_swundi = TRUE;
if ((pxe->sw.Implementation & PXE_ROMID_IMP_SW_VIRT_ADDR) != 0) {
snp->issue_undi32_command = (issue_undi32_command) (UINTN) pxe->sw.EntryPoint;
} else {
snp->issue_undi32_command = (issue_undi32_command) (UINTN) ((UINT8) (UINTN) pxe + pxe->sw.EntryPoint);
}
}
//
// Allocate a global CPB and DB buffer for this UNDI interface.
// we do this because:
//
// -UNDI 3.0 wants all the addresses passed to it (even the cpb and db) to be
// within 2GB limit, create them here and map them so that when undi calls
// v2p callback to check if the physical address is < 2gb, we will pass.
//
// -This is not a requirement for 3.1 or later UNDIs but the code looks
// simpler if we use the same cpb, db variables for both old and new undi
// interfaces from all the SNP interface calls (we don't map the buffers
// for the newer undi interfaces though)
// .
// -it is OK to allocate one global set of CPB, DB pair for each UNDI
// interface as EFI does not multi-task and so SNP will not be re-entered!
//
Status = mPciIoFncs->AllocateBuffer (
mPciIoFncs,
AllocateAnyPages,
EfiBootServicesData,
SNP_MEM_PAGES (4096),
&addr,
0
);
if (Status != EFI_SUCCESS) {
DEBUG ((EFI_D_NET, "\nCould not allocate CPB and DB structures.\n"));
goto Error_DeleteSNP;
}
snp->cpb = (VOID *) (UINTN) addr;
snp->db = (VOID *) ((UINTN) addr + 2048);
//
// pxe_start call is going to give the callback functions to UNDI, these callback
// functions use the BarIndex values from the snp structure, so these must be initialized
// with default values before doing a pxe_start. The correct values can be obtained after
// getting the config information from UNDI
//
snp->MemoryBarIndex = 0;
snp->IoBarIndex = 1;
//
// we need the undi init information many times in this snp code, just get it
// once here and store it in the snp driver structure. to get Init Info
// from UNDI we have to start undi first.
//
Status = pxe_start (snp);
if (Status != EFI_SUCCESS) {
goto Error_DeleteSNP;
}
snp->cdb.OpCode = PXE_OPCODE_GET_INIT_INFO;
snp->cdb.OpFlags = PXE_OPFLAGS_NOT_USED;
snp->cdb.CPBsize = PXE_CPBSIZE_NOT_USED;
snp->cdb.CPBaddr = PXE_DBADDR_NOT_USED;
snp->cdb.DBsize = sizeof snp->init_info;
snp->cdb.DBaddr = (UINT64)(UINTN) &snp->init_info;
snp->cdb.StatCode = PXE_STATCODE_INITIALIZE;
snp->cdb.StatFlags = PXE_STATFLAGS_INITIALIZE;
snp->cdb.IFnum = snp->if_num;
snp->cdb.Control = PXE_CONTROL_LAST_CDB_IN_LIST;
DEBUG ((EFI_D_NET, "\nsnp->undi.get_init_info() "));
(*snp->issue_undi32_command) ((UINT64)(UINTN) &snp->cdb);
//
// Save the INIT Stat Code...
//
InitStatFlags = snp->cdb.StatFlags;
if (snp->cdb.StatCode != PXE_STATCODE_SUCCESS) {
DEBUG ((EFI_D_NET, "\nsnp->undi.init_info() %xh:%xh\n", snp->cdb.StatFlags, snp->cdb.StatCode));
pxe_stop (snp);
goto Error_DeleteSNP;
}
snp->cdb.OpCode = PXE_OPCODE_GET_CONFIG_INFO;
snp->cdb.OpFlags = PXE_OPFLAGS_NOT_USED;
snp->cdb.CPBsize = PXE_CPBSIZE_NOT_USED;
snp->cdb.CPBaddr = PXE_DBADDR_NOT_USED;
snp->cdb.DBsize = sizeof ConfigInfo;
snp->cdb.DBaddr = (UINT64)(UINTN) &ConfigInfo;
snp->cdb.StatCode = PXE_STATCODE_INITIALIZE;
snp->cdb.StatFlags = PXE_STATFLAGS_INITIALIZE;
snp->cdb.IFnum = snp->if_num;
snp->cdb.Control = PXE_CONTROL_LAST_CDB_IN_LIST;
DEBUG ((EFI_D_NET, "\nsnp->undi.get_config_info() "));
(*snp->issue_undi32_command) ((UINT64)(UINTN) &snp->cdb);
if (snp->cdb.StatCode != PXE_STATCODE_SUCCESS) {
DEBUG ((EFI_D_NET, "\nsnp->undi.config_info() %xh:%xh\n", snp->cdb.StatFlags, snp->cdb.StatCode));
pxe_stop (snp);
goto Error_DeleteSNP;
}
//
// Find the correct BAR to do IO.
//
//
// Enumerate through the PCI BARs for the device to determine which one is
// the IO BAR. Save the index of the BAR into the adapter info structure.
// for regular 32bit BARs, 0 is memory mapped, 1 is io mapped
//
ConfigHeader = (PCI_TYPE00 *) &ConfigInfo.Config.Byte[0];
TempBar = (UINT32 *) &ConfigHeader->Device.Bar[0];
for (BarIndex = 0; BarIndex <= 5; BarIndex++) {
if ((*TempBar & PCI_BAR_MEM_MASK) == PCI_BAR_MEM_64BIT) {
//
// This is a 64-bit memory bar, skip this and the
// next bar as well.
//
TempBar++;
}
if ((*TempBar & PCI_BAR_IO_MASK) == PCI_BAR_IO_MODE) {
snp->IoBarIndex = BarIndex;
break;
}
TempBar++;
}
//
// Initialize simple network protocol mode structure
//
snp->mode.State = EfiSimpleNetworkStopped;
snp->mode.HwAddressSize = snp->init_info.HWaddrLen;
snp->mode.MediaHeaderSize = snp->init_info.MediaHeaderLen;
snp->mode.MaxPacketSize = snp->init_info.FrameDataLen;
snp->mode.NvRamAccessSize = snp->init_info.NvWidth;
snp->mode.NvRamSize = snp->init_info.NvCount * snp->mode.NvRamAccessSize;
snp->mode.IfType = snp->init_info.IFtype;
snp->mode.MaxMCastFilterCount = snp->init_info.MCastFilterCnt;
snp->mode.MCastFilterCount = 0;
switch (InitStatFlags & PXE_STATFLAGS_CABLE_DETECT_MASK) {
case PXE_STATFLAGS_CABLE_DETECT_SUPPORTED:
snp->mode.MediaPresentSupported = TRUE;
break;
case PXE_STATFLAGS_CABLE_DETECT_NOT_SUPPORTED:
default:
snp->mode.MediaPresentSupported = FALSE;
}
if ((pxe->hw.Implementation & PXE_ROMID_IMP_STATION_ADDR_SETTABLE) != 0) {
snp->mode.MacAddressChangeable = TRUE;
} else {
snp->mode.MacAddressChangeable = FALSE;
}
if ((pxe->hw.Implementation & PXE_ROMID_IMP_MULTI_FRAME_SUPPORTED) != 0) {
snp->mode.MultipleTxSupported = TRUE;
} else {
snp->mode.MultipleTxSupported = FALSE;
}
snp->mode.ReceiveFilterMask = EFI_SIMPLE_NETWORK_RECEIVE_UNICAST;
if ((pxe->hw.Implementation & PXE_ROMID_IMP_PROMISCUOUS_MULTICAST_RX_SUPPORTED) != 0) {
snp->mode.ReceiveFilterMask |= EFI_SIMPLE_NETWORK_RECEIVE_PROMISCUOUS_MULTICAST;
}
if ((pxe->hw.Implementation & PXE_ROMID_IMP_PROMISCUOUS_RX_SUPPORTED) != 0) {
snp->mode.ReceiveFilterMask |= EFI_SIMPLE_NETWORK_RECEIVE_PROMISCUOUS;
}
if ((pxe->hw.Implementation & PXE_ROMID_IMP_BROADCAST_RX_SUPPORTED) != 0) {
snp->mode.ReceiveFilterMask |= EFI_SIMPLE_NETWORK_RECEIVE_BROADCAST;
}
if ((pxe->hw.Implementation & PXE_ROMID_IMP_FILTERED_MULTICAST_RX_SUPPORTED) != 0) {
snp->mode.ReceiveFilterMask |= EFI_SIMPLE_NETWORK_RECEIVE_MULTICAST;
}
if (pxe->hw.Implementation & PXE_ROMID_IMP_PROMISCUOUS_MULTICAST_RX_SUPPORTED) {
snp->mode.ReceiveFilterMask |= EFI_SIMPLE_NETWORK_RECEIVE_PROMISCUOUS_MULTICAST;
}
snp->mode.ReceiveFilterSetting = 0;
//
// need to get the station address to save in the mode structure. we need to
// initialize the UNDI first for this.
//
snp->tx_rx_bufsize = snp->init_info.MemoryRequired;
Status = pxe_init (snp, PXE_OPFLAGS_INITIALIZE_DO_NOT_DETECT_CABLE);
if (Status) {
pxe_stop (snp);
goto Error_DeleteSNP;
}
Status = pxe_get_stn_addr (snp);
if (Status != EFI_SUCCESS) {
DEBUG ((EFI_D_ERROR, "\nsnp->undi.get_station_addr() failed.\n"));
pxe_shutdown (snp);
pxe_stop (snp);
goto Error_DeleteSNP;
}
snp->mode.MediaPresent = FALSE;
//
// We should not leave UNDI started and initialized here. this DriverStart()
// routine must only find and attach the SNP interface to UNDI layer that it
// finds on the given handle!
// The UNDI layer will be started when upper layers call snp->start.
// How ever, this DriverStart() must fill up the snp mode structure which
// contains the MAC address of the NIC. For this reason we started and
// initialized UNDI here, now we are done, do a shutdown and stop of the
// UNDI interface!
//
pxe_shutdown (snp);
pxe_stop (snp);
//
// add SNP to the undi handle
//
Status = gBS->InstallProtocolInterface (
&Controller,
&gEfiSimpleNetworkProtocolGuid,
EFI_NATIVE_INTERFACE,
&(snp->snp)
);
if (!EFI_ERROR (Status)) {
return Status;
}
Status = mPciIoFncs->FreeBuffer (
mPciIoFncs,
SNP_MEM_PAGES (4096),
snp->cpb
);
Error_DeleteSNP:
mPciIoFncs->FreeBuffer (
mPciIoFncs,
SNP_MEM_PAGES (sizeof (SNP_DRIVER)),
snp
);
NiiError:
gBS->CloseProtocol (
Controller,
&gEfiNetworkInterfaceIdentifierProtocolGuid_31,
This->DriverBindingHandle,
Controller
);
gBS->CloseProtocol (
Controller,
&gEfiDevicePathProtocolGuid,
This->DriverBindingHandle,
Controller
);
return Status;
}
/**
**/
EFI_STATUS
EFIAPI
SimpleNetworkDriverStop (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE Controller,
IN UINTN NumberOfChildren,
IN EFI_HANDLE *ChildHandleBuffer
)
{
EFI_STATUS Status;
EFI_SIMPLE_NETWORK_PROTOCOL *SnpProtocol;
SNP_DRIVER *Snp;
//
// Get our context back.
//
Status = gBS->OpenProtocol (
Controller,
&gEfiSimpleNetworkProtocolGuid,
(VOID **) &SnpProtocol,
This->DriverBindingHandle,
Controller,
EFI_OPEN_PROTOCOL_GET_PROTOCOL
);
if (EFI_ERROR (Status)) {
return EFI_UNSUPPORTED;
}
Snp = EFI_SIMPLE_NETWORK_DEV_FROM_THIS (SnpProtocol);
Status = gBS->UninstallProtocolInterface (
Controller,
&gEfiSimpleNetworkProtocolGuid,
&Snp->snp
);
if (EFI_ERROR (Status)) {
return Status;
}
Status = gBS->CloseProtocol (
Controller,
&gEfiNetworkInterfaceIdentifierProtocolGuid_31,
This->DriverBindingHandle,
Controller
);
Status = gBS->CloseProtocol (
Controller,
&gEfiDevicePathProtocolGuid,
This->DriverBindingHandle,
Controller
);
pxe_shutdown (Snp);
pxe_stop (Snp);
mPciIoFncs->FreeBuffer (
mPciIoFncs,
SNP_MEM_PAGES (4096),
Snp->cpb
);
mPciIoFncs->FreeBuffer (
mPciIoFncs,
SNP_MEM_PAGES (sizeof (SNP_DRIVER)),
Snp
);
return Status;
}
/**
Install all the driver protocol
@param entry EFI_IMAGE_ENTRY_POINT)
@retval EFI_SUCEESS Initialization routine has found UNDI hardware,
loaded it's ROM, and installed a notify event for
the Network Indentifier Interface Protocol
successfully.
@retval Other Return value from HandleProtocol for
DeviceIoProtocol or LoadedImageProtocol
**/
EFI_STATUS
EFIAPI
InitializeSnpNiiDriver (
IN EFI_HANDLE ImageHandle,
IN EFI_SYSTEM_TABLE *SystemTable
)
{
return EfiLibInstallDriverBindingComponentName2 (
ImageHandle,
SystemTable,
&mSimpleNetworkDriverBinding,
NULL,
&gSimpleNetworkComponentName,
&gSimpleNetworkComponentName2
);
}