tyler.durden
/
audk
mirror of https://github.com/acidanthera/audk.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
audk/EmulatorPkg/EmuBlockIoDxe/EmuBlockIo.c

744 lines
27 KiB
C
Raw Blame History

/**@file
Copyright (c) 2004 - 2018, Intel Corporation. All rights reserved.<BR>
SPDX-License-Identifier: BSD-2-Clause-Patent
bbe
**/
#include "EmuBlockIo.h"
/**
Reset the block device hardware.
@param[in] This Indicates a pointer to the calling context.
@param[in] ExtendedVerification Indicates that the driver may perform a more
exhausive verfication operation of the device
during reset.
@retval EFI_SUCCESS The device was reset.
@retval EFI_DEVICE_ERROR The device is not functioning properly and could
not be reset.
**/
EFI_STATUS
EFIAPI
EmuBlockIo2Reset (
IN EFI_BLOCK_IO2_PROTOCOL *This,
IN BOOLEAN ExtendedVerification
)
{
EFI_STATUS Status;
EMU_BLOCK_IO_PRIVATE *Private;
EFI_TPL OldTpl;
Private = EMU_BLOCK_IO2_PRIVATE_DATA_FROM_THIS (This);
OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
Status = Private->Io->Reset (Private->Io, ExtendedVerification);
gBS->RestoreTPL (OldTpl);
return Status;
}
/**
Read BufferSize bytes from Lba into Buffer.
This function reads the requested number of blocks from the device. All the
blocks are read, or an error is returned.
If EFI_DEVICE_ERROR, EFI_NO_MEDIA,_or EFI_MEDIA_CHANGED is returned and
non-blocking I/O is being used, the Event associated with this request will
not be signaled.
@param[in] This Indicates a pointer to the calling context.
@param[in] MediaId Id of the media, changes every time the media is
replaced.
@param[in] Lba The starting Logical Block Address to read from.
@param[in, out] Token A pointer to the token associated with the transaction.
@param[in] BufferSize Size of Buffer, must be a multiple of device block size.
@param[out] Buffer A pointer to the destination buffer for the data. The
caller is responsible for either having implicit or
explicit ownership of the buffer.
@retval EFI_SUCCESS The read request was queued if Token->Event is
not NULL.The data was read correctly from the
device if the Token->Event is NULL.
@retval EFI_DEVICE_ERROR The device reported an error while performing
the read.
@retval EFI_NO_MEDIA There is no media in the device.
@retval EFI_MEDIA_CHANGED The MediaId is not for the current media.
@retval EFI_BAD_BUFFER_SIZE The BufferSize parameter is not a multiple of the
intrinsic block size of the device.
@retval EFI_INVALID_PARAMETER The read request contains LBAs that are not valid,
or the buffer is not on proper alignment.
@retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack
of resources.
**/
EFI_STATUS
EFIAPI
EmuBlockIo2ReadBlocksEx (
IN EFI_BLOCK_IO2_PROTOCOL *This,
IN UINT32 MediaId,
IN EFI_LBA LBA,
IN OUT EFI_BLOCK_IO2_TOKEN *Token,
IN UINTN BufferSize,
OUT VOID *Buffer
)
{
EFI_STATUS Status;
EMU_BLOCK_IO_PRIVATE *Private;
EFI_TPL OldTpl;
Private = EMU_BLOCK_IO2_PRIVATE_DATA_FROM_THIS (This);
OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
Status = Private->Io->ReadBlocks (Private->Io, MediaId, LBA, Token, BufferSize, Buffer);
gBS->RestoreTPL (OldTpl);
return Status;
}
/**
Write BufferSize bytes from Lba into Buffer.
This function writes the requested number of blocks to the device. All blocks
are written, or an error is returned.If EFI_DEVICE_ERROR, EFI_NO_MEDIA,
EFI_WRITE_PROTECTED or EFI_MEDIA_CHANGED is returned and non-blocking I/O is
being used, the Event associated with this request will not be signaled.
@param[in] This Indicates a pointer to the calling context.
@param[in] MediaId The media ID that the write request is for.
@param[in] Lba The starting logical block address to be written. The
caller is responsible for writing to only legitimate
locations.
@param[in, out] Token A pointer to the token associated with the transaction.
@param[in] BufferSize Size of Buffer, must be a multiple of device block size.
@param[in] Buffer A pointer to the source buffer for the data.
@retval EFI_SUCCESS The write request was queued if Event is not NULL.
The data was written correctly to the device if
the Event is NULL.
@retval EFI_WRITE_PROTECTED The device can not be written to.
@retval EFI_NO_MEDIA There is no media in the device.
@retval EFI_MEDIA_CHNAGED The MediaId does not matched the current device.
@retval EFI_DEVICE_ERROR The device reported an error while performing the write.
@retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block size of the device.
@retval EFI_INVALID_PARAMETER The write request contains LBAs that are not valid,
or the buffer is not on proper alignment.
@retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack
of resources.
**/
EFI_STATUS
EFIAPI
EmuBlockIo2WriteBlocksEx (
IN EFI_BLOCK_IO2_PROTOCOL *This,
IN UINT32 MediaId,
IN EFI_LBA LBA,
IN OUT EFI_BLOCK_IO2_TOKEN *Token,
IN UINTN BufferSize,
IN VOID *Buffer
)
{
EFI_STATUS Status;
EMU_BLOCK_IO_PRIVATE *Private;
EFI_TPL OldTpl;
Private = EMU_BLOCK_IO2_PRIVATE_DATA_FROM_THIS (This);
OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
Status = Private->Io->WriteBlocks (Private->Io, MediaId, LBA, Token, BufferSize, Buffer);
gBS->RestoreTPL (OldTpl);
return Status;
}
/**
Flush the Block Device.
If EFI_DEVICE_ERROR, EFI_NO_MEDIA,_EFI_WRITE_PROTECTED or EFI_MEDIA_CHANGED
is returned and non-blocking I/O is being used, the Event associated with
this request will not be signaled.
@param[in] This Indicates a pointer to the calling context.
@param[in,out] Token A pointer to the token associated with the transaction
@retval EFI_SUCCESS The flush request was queued if Event is not NULL.
All outstanding data was written correctly to the
device if the Event is NULL.
@retval EFI_DEVICE_ERROR The device reported an error while writting back
the data.
@retval EFI_WRITE_PROTECTED The device cannot be written to.
@retval EFI_NO_MEDIA There is no media in the device.
@retval EFI_MEDIA_CHANGED The MediaId is not for the current media.
@retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack
of resources.
**/
EFI_STATUS
EFIAPI
EmuBlockIo2Flush (
IN EFI_BLOCK_IO2_PROTOCOL *This,
IN OUT EFI_BLOCK_IO2_TOKEN *Token
)
{
EFI_STATUS Status;
EMU_BLOCK_IO_PRIVATE *Private;
EFI_TPL OldTpl;
Private = EMU_BLOCK_IO2_PRIVATE_DATA_FROM_THIS (This);
OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
Status = Private->Io->FlushBlocks (Private->Io, Token);
gBS->RestoreTPL (OldTpl);
return Status;
}
/**
Reset the Block Device.
@param This Indicates a pointer to the calling context.
@param ExtendedVerification Driver may perform diagnostics on reset.
@retval EFI_SUCCESS The device was reset.
@retval EFI_DEVICE_ERROR The device is not functioning properly and could
not be reset.
**/
EFI_STATUS
EFIAPI
EmuBlockIoReset (
IN EFI_BLOCK_IO_PROTOCOL *This,
IN BOOLEAN ExtendedVerification
)
{
EFI_STATUS Status;
EMU_BLOCK_IO_PRIVATE *Private;
EFI_TPL OldTpl;
Private = EMU_BLOCK_IO_PRIVATE_DATA_FROM_THIS (This);
OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
Status = Private->Io->Reset (Private->Io, ExtendedVerification);
gBS->RestoreTPL (OldTpl);
return Status;
}
/**
Read BufferSize bytes from Lba into Buffer.
@param This Indicates a pointer to the calling context.
@param MediaId Id of the media, changes every time the media is replaced.
@param Lba The starting Logical Block Address to read from
@param BufferSize Size of Buffer, must be a multiple of device block size.
@param Buffer A pointer to the destination buffer for the data. The caller is
responsible for either having implicit or explicit ownership of the buffer.
@retval EFI_SUCCESS The data was read correctly from the device.
@retval EFI_DEVICE_ERROR The device reported an error while performing the read.
@retval EFI_NO_MEDIA There is no media in the device.
@retval EFI_MEDIA_CHANGED The MediaId does not matched the current device.
@retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block size of the device.
@retval EFI_INVALID_PARAMETER The read request contains LBAs that are not valid,
or the buffer is not on proper alignment.
**/
EFI_STATUS
EFIAPI
EmuBlockIoReadBlocks (
IN EFI_BLOCK_IO_PROTOCOL *This,
IN UINT32 MediaId,
IN EFI_LBA Lba,
IN UINTN BufferSize,
OUT VOID *Buffer
)
{
EFI_STATUS Status;
EMU_BLOCK_IO_PRIVATE *Private;
EFI_TPL OldTpl;
EFI_BLOCK_IO2_TOKEN Token;
Private = EMU_BLOCK_IO_PRIVATE_DATA_FROM_THIS (This);
OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
Token.Event = NULL;
Status = Private->Io->ReadBlocks (Private->Io, MediaId, Lba, &Token, BufferSize, Buffer);
gBS->RestoreTPL (OldTpl);
return Status;
}
/**
Write BufferSize bytes from Lba into Buffer.
@param This Indicates a pointer to the calling context.
@param MediaId The media ID that the write request is for.
@param Lba The starting logical block address to be written. The caller is
responsible for writing to only legitimate locations.
@param BufferSize Size of Buffer, must be a multiple of device block size.
@param Buffer A pointer to the source buffer for the data.
@retval EFI_SUCCESS The data was written correctly to the device.
@retval EFI_WRITE_PROTECTED The device can not be written to.
@retval EFI_DEVICE_ERROR The device reported an error while performing the write.
@retval EFI_NO_MEDIA There is no media in the device.
@retval EFI_MEDIA_CHNAGED The MediaId does not matched the current device.
@retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block size of the device.
@retval EFI_INVALID_PARAMETER The write request contains LBAs that are not valid,
or the buffer is not on proper alignment.
**/
EFI_STATUS
EFIAPI
EmuBlockIoWriteBlocks (
IN EFI_BLOCK_IO_PROTOCOL *This,
IN UINT32 MediaId,
IN EFI_LBA Lba,
IN UINTN BufferSize,
IN VOID *Buffer
)
{
EFI_STATUS Status;
EMU_BLOCK_IO_PRIVATE *Private;
EFI_TPL OldTpl;
EFI_BLOCK_IO2_TOKEN Token;
Private = EMU_BLOCK_IO_PRIVATE_DATA_FROM_THIS (This);
OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
Token.Event = NULL;
Status = Private->Io->WriteBlocks (Private->Io, MediaId, Lba, &Token, BufferSize, Buffer);
gBS->RestoreTPL (OldTpl);
return Status;
}
/**
Flush the Block Device.
@param This Indicates a pointer to the calling context.
@retval EFI_SUCCESS All outstanding data was written to the device
@retval EFI_DEVICE_ERROR The device reported an error while writting back the data
@retval EFI_NO_MEDIA There is no media in the device.
**/
EFI_STATUS
EFIAPI
EmuBlockIoFlushBlocks (
IN EFI_BLOCK_IO_PROTOCOL *This
)
{
EFI_STATUS Status;
EMU_BLOCK_IO_PRIVATE *Private;
EFI_TPL OldTpl;
EFI_BLOCK_IO2_TOKEN Token;
Private = EMU_BLOCK_IO_PRIVATE_DATA_FROM_THIS (This);
OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
Token.Event = NULL;
Status = Private->Io->FlushBlocks (Private->Io, &Token);
gBS->RestoreTPL (OldTpl);
return Status;
}
/**
Tests to see if this driver supports a given controller. If a child device is provided,
it further tests to see if this driver supports creating a handle for the specified child device.
This function checks to see if the driver specified by This supports the device specified by
ControllerHandle. Drivers will typically use the device path attached to
ControllerHandle and/or the services from the bus I/O abstraction attached to
ControllerHandle to determine if the driver supports ControllerHandle. This function
may be called many times during platform initialization. In order to reduce boot times, the tests
performed by this function must be very small, and take as little time as possible to execute. This
function must not change the state of any hardware devices, and this function must be aware that the
device specified by ControllerHandle may already be managed by the same driver or a
different driver. This function must match its calls to AllocatePages() with FreePages(),
AllocatePool() with FreePool(), and OpenProtocol() with CloseProtocol().
Because ControllerHandle may have been previously started by the same driver, if a protocol is
already in the opened state, then it must not be closed with CloseProtocol(). This is required
to guarantee the state of ControllerHandle is not modified by this function.
@param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
@param[in] ControllerHandle The handle of the controller to test. This handle
must support a protocol interface that supplies
an I/O abstraction to the driver.
@param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This
parameter is ignored by device drivers, and is optional for bus
drivers. For bus drivers, if this parameter is not NULL, then
the bus driver must determine if the bus controller specified
by ControllerHandle and the child controller specified
by RemainingDevicePath are both supported by this
bus driver.
@retval EFI_SUCCESS The device specified by ControllerHandle and
RemainingDevicePath is supported by the driver specified by This.
@retval EFI_ALREADY_STARTED The device specified by ControllerHandle and
RemainingDevicePath is already being managed by the driver
specified by This.
@retval EFI_ACCESS_DENIED The device specified by ControllerHandle and
RemainingDevicePath is already being managed by a different
driver or an application that requires exclusive access.
Currently not implemented.
@retval EFI_UNSUPPORTED The device specified by ControllerHandle and
RemainingDevicePath is not supported by the driver specified by This.
**/
EFI_STATUS
EFIAPI
EmuBlockIoDriverBindingSupported (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE Handle,
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
)
{
EFI_STATUS Status;
EMU_IO_THUNK_PROTOCOL *EmuIoThunk;
//
// Open the IO Abstraction(s) needed to perform the supported test
//
Status = gBS->OpenProtocol (
Handle,
&gEmuIoThunkProtocolGuid,
(VOID **)&EmuIoThunk,
This->DriverBindingHandle,
Handle,
EFI_OPEN_PROTOCOL_BY_DRIVER
);
if (EFI_ERROR (Status)) {
return Status;
}
//
// Make sure GUID is for a File System handle.
//
Status = EFI_UNSUPPORTED;
if (CompareGuid (EmuIoThunk->Protocol, &gEmuBlockIoProtocolGuid)) {
Status = EFI_SUCCESS;
}
//
// Close the I/O Abstraction(s) used to perform the supported test
//
gBS->CloseProtocol (
Handle,
&gEmuIoThunkProtocolGuid,
This->DriverBindingHandle,
Handle
);
return Status;
}
/**
Starts a device controller or a bus controller.
The Start() function is designed to be invoked from the EFI boot service ConnectController().
As a result, much of the error checking on the parameters to Start() has been moved into this
common boot service. It is legal to call Start() from other locations,
but the following calling restrictions must be followed, or the system behavior will not be deterministic.
1. ControllerHandle must be a valid EFI_HANDLE.
2. If RemainingDevicePath is not NULL, then it must be a pointer to a naturally aligned
EFI_DEVICE_PATH_PROTOCOL.
3. Prior to calling Start(), the Supported() function for the driver specified by This must
have been called with the same calling parameters, and Supported() must have returned EFI_SUCCESS.
@param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
@param[in] ControllerHandle The handle of the controller to start. This handle
must support a protocol interface that supplies
an I/O abstraction to the driver.
@param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This
parameter is ignored by device drivers, and is optional for bus
drivers. For a bus driver, if this parameter is NULL, then handles
for all the children of Controller are created by this driver.
If this parameter is not NULL and the first Device Path Node is
not the End of Device Path Node, then only the handle for the
child device specified by the first Device Path Node of
RemainingDevicePath is created by this driver.
If the first Device Path Node of RemainingDevicePath is
the End of Device Path Node, no child handle is created by this
driver.
@retval EFI_SUCCESS The device was started.
@retval EFI_DEVICE_ERROR The device could not be started due to a device error.Currently not implemented.
@retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
@retval Others The driver failded to start the device.
**/
EFI_STATUS
EFIAPI
EmuBlockIoDriverBindingStart (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE Handle,
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
)
{
EFI_STATUS Status;
EMU_IO_THUNK_PROTOCOL *EmuIoThunk;
EMU_BLOCK_IO_PRIVATE *Private = NULL;
//
// Grab the protocols we need
//
Status = gBS->OpenProtocol (
Handle,
&gEmuIoThunkProtocolGuid,
(void *)&EmuIoThunk,
This->DriverBindingHandle,
Handle,
EFI_OPEN_PROTOCOL_BY_DRIVER
);
if (EFI_ERROR (Status)) {
return Status;
}
if (!CompareGuid (EmuIoThunk->Protocol, &gEmuBlockIoProtocolGuid)) {
Status = EFI_UNSUPPORTED;
goto Done;
}
Status = EmuIoThunk->Open (EmuIoThunk);
if (EFI_ERROR (Status)) {
goto Done;
}
Private = AllocatePool (sizeof (EMU_BLOCK_IO_PRIVATE));
if (Private == NULL) {
goto Done;
}
Private->Signature = EMU_BLOCK_IO_PRIVATE_SIGNATURE;
Private->IoThunk = EmuIoThunk;
Private->Io = EmuIoThunk->Interface;
Private->EfiHandle = Handle;
Private->BlockIo.Revision = EFI_BLOCK_IO_PROTOCOL_REVISION2;
Private->BlockIo.Media = &Private->Media;
Private->BlockIo.Reset = EmuBlockIoReset;
Private->BlockIo.ReadBlocks = EmuBlockIoReadBlocks;
Private->BlockIo.WriteBlocks = EmuBlockIoWriteBlocks;
Private->BlockIo.FlushBlocks = EmuBlockIoFlushBlocks;
Private->BlockIo2.Media = &Private->Media;
Private->BlockIo2.Reset = EmuBlockIo2Reset;
Private->BlockIo2.ReadBlocksEx = EmuBlockIo2ReadBlocksEx;
Private->BlockIo2.WriteBlocksEx = EmuBlockIo2WriteBlocksEx;
Private->BlockIo2.FlushBlocksEx = EmuBlockIo2Flush;
Private->ControllerNameTable = NULL;
Status = Private->Io->CreateMapping (Private->Io, &Private->Media);
if (EFI_ERROR (Status)) {
goto Done;
}
AddUnicodeString2 (
"eng",
gEmuBlockIoComponentName.SupportedLanguages,
&Private->ControllerNameTable,
EmuIoThunk->ConfigString,
TRUE
);
AddUnicodeString2 (
"en",
gEmuBlockIoComponentName2.SupportedLanguages,
&Private->ControllerNameTable,
EmuIoThunk->ConfigString,
FALSE
);
Status = gBS->InstallMultipleProtocolInterfaces (
&Handle,
&gEfiBlockIoProtocolGuid, &Private->BlockIo,
&gEfiBlockIo2ProtocolGuid, &Private->BlockIo2,
NULL
);
Done:
if (EFI_ERROR (Status)) {
if (Private != NULL) {
if (Private->ControllerNameTable != NULL) {
FreeUnicodeStringTable (Private->ControllerNameTable);
}
gBS->FreePool (Private);
}
gBS->CloseProtocol (
Handle,
&gEmuIoThunkProtocolGuid,
This->DriverBindingHandle,
Handle
);
}
return Status;
}
/**
Stops a device controller or a bus controller.
The Stop() function is designed to be invoked from the EFI boot service DisconnectController().
As a result, much of the error checking on the parameters to Stop() has been moved
into this common boot service. It is legal to call Stop() from other locations,
but the following calling restrictions must be followed, or the system behavior will not be deterministic.
1. ControllerHandle must be a valid EFI_HANDLE that was used on a previous call to this
same driver's Start() function.
2. The first NumberOfChildren handles of ChildHandleBuffer must all be a valid
EFI_HANDLE. In addition, all of these handles must have been created in this driver's
Start() function, and the Start() function must have called OpenProtocol() on
ControllerHandle with an Attribute of EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER.
@param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
@param[in] ControllerHandle A handle to the device being stopped. The handle must
support a bus specific I/O protocol for the driver
to use to stop the device.
@param[in] NumberOfChildren The number of child device handles in ChildHandleBuffer.
@param[in] ChildHandleBuffer An array of child handles to be freed. May be NULL
if NumberOfChildren is 0.
@retval EFI_SUCCESS The device was stopped.
@retval EFI_DEVICE_ERROR The device could not be stopped due to a device error.
**/
EFI_STATUS
EFIAPI
EmuBlockIoDriverBindingStop (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE Handle,
IN UINTN NumberOfChildren,
IN EFI_HANDLE *ChildHandleBuffer
)
{
EFI_BLOCK_IO_PROTOCOL *BlockIo;
EFI_STATUS Status;
EMU_BLOCK_IO_PRIVATE *Private;
//
// Get our context back
//
Status = gBS->OpenProtocol (
Handle,
&gEfiBlockIoProtocolGuid,
(void *)&BlockIo,
This->DriverBindingHandle,
Handle,
EFI_OPEN_PROTOCOL_GET_PROTOCOL
);
if (EFI_ERROR (Status)) {
return EFI_UNSUPPORTED;
}
Private = EMU_BLOCK_IO_PRIVATE_DATA_FROM_THIS (BlockIo);
Status = gBS->UninstallMultipleProtocolInterfaces (
Private->EfiHandle,
&gEfiBlockIoProtocolGuid, &Private->BlockIo,
&gEfiBlockIo2ProtocolGuid, &Private->BlockIo2,
NULL
);
if (!EFI_ERROR (Status)) {
Status = gBS->CloseProtocol (
Handle,
&gEmuIoThunkProtocolGuid,
This->DriverBindingHandle,
Handle
);
ASSERT_EFI_ERROR (Status);
//
// Destroy the IO interface.
//
Status = Private->IoThunk->Close (Private->IoThunk);
ASSERT_EFI_ERROR (Status);
//
// Free our instance data
//
FreeUnicodeStringTable (Private->ControllerNameTable);
FreePool (Private);
}
return Status;
}
EFI_DRIVER_BINDING_PROTOCOL gEmuBlockIoDriverBinding = {
EmuBlockIoDriverBindingSupported,
EmuBlockIoDriverBindingStart,
EmuBlockIoDriverBindingStop,
0xa,
NULL,
NULL
};
/**
The user Entry Point for module EmuBlockIo . The user code starts with this function.
@param[in] ImageHandle The firmware allocated handle for the EFI image.
@param[in] SystemTable A pointer to the EFI System Table.
@retval EFI_SUCCESS The entry point is executed successfully.
@retval other Some error occurs when executing this entry point.
**/
EFI_STATUS
EFIAPI
InitializeEmuBlockIo (
IN EFI_HANDLE ImageHandle,
IN EFI_SYSTEM_TABLE *SystemTable
)
{
EFI_STATUS Status;
Status = EfiLibInstallAllDriverProtocols2 (
ImageHandle,
SystemTable,
&gEmuBlockIoDriverBinding,
ImageHandle,
&gEmuBlockIoComponentName,
&gEmuBlockIoComponentName2,
NULL,
NULL,
&gEmuBlockIoDriverDiagnostics,
&gEmuBlockIoDriverDiagnostics2
);
ASSERT_EFI_ERROR (Status);
return Status;
}
Reference in New Issue View Git Blame Copy Permalink