tyler.durden
/
audk
mirror of https://github.com/acidanthera/audk.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
audk/MdePkg/Include/Protocol/UsbFunctionIo.h

688 lines
27 KiB
C
Raw Blame History

/** @file
The USB Function Protocol provides an I/O abstraction for a USB Controller
operating in Function mode (also commonly referred to as Device, Peripheral,
or Target mode) and the mechanisms by which the USB Function can communicate
with the USB Host. It is used by other UEFI drivers or applications to
perform data transactions and basic USB controller management over a USB
Function port.
This simple protocol only supports USB 2.0 bulk transfers on systems with a
single configuration and a single interface. It does not support isochronous
or interrupt transfers, alternate interfaces, or USB 3.0 functionality.
Future revisions of this protocol may support these or additional features.
Copyright (c) 2015 - 2017, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#ifndef __USB_FUNCTION_IO_H__
#define __USB_FUNCTION_IO_H__
#include <Protocol/UsbIo.h>
#define EFI_USBFN_IO_PROTOCOL_GUID \
{ \
0x32d2963a, 0xfe5d, 0x4f30, {0xb6, 0x33, 0x6e, 0x5d, 0xc5, 0x58, 0x3, 0xcc} \
}
typedef struct _EFI_USBFN_IO_PROTOCOL EFI_USBFN_IO_PROTOCOL;
#define EFI_USBFN_IO_PROTOCOL_REVISION 0x00010001
typedef enum _EFI_USBFN_PORT_TYPE {
EfiUsbUnknownPort = 0,
EfiUsbStandardDownstreamPort,
EfiUsbChargingDownstreamPort,
EfiUsbDedicatedChargingPort,
EfiUsbInvalidDedicatedChargingPort
} EFI_USBFN_PORT_TYPE;
typedef struct {
EFI_USB_INTERFACE_DESCRIPTOR *InterfaceDescriptor;
EFI_USB_ENDPOINT_DESCRIPTOR **EndpointDescriptorTable;
} EFI_USB_INTERFACE_INFO;
typedef struct {
EFI_USB_CONFIG_DESCRIPTOR *ConfigDescriptor;
EFI_USB_INTERFACE_INFO **InterfaceInfoTable;
} EFI_USB_CONFIG_INFO;
typedef struct {
EFI_USB_DEVICE_DESCRIPTOR *DeviceDescriptor;
EFI_USB_CONFIG_INFO **ConfigInfoTable;
} EFI_USB_DEVICE_INFO;
typedef enum _EFI_USB_ENDPOINT_TYPE {
UsbEndpointControl = 0x00,
//UsbEndpointIsochronous = 0x01,
UsbEndpointBulk = 0x02,
//UsbEndpointInterrupt = 0x03
} EFI_USB_ENDPOINT_TYPE;
typedef enum _EFI_USBFN_DEVICE_INFO_ID {
EfiUsbDeviceInfoUnknown = 0,
EfiUsbDeviceInfoSerialNumber,
EfiUsbDeviceInfoManufacturerName,
EfiUsbDeviceInfoProductName
} EFI_USBFN_DEVICE_INFO_ID;
typedef enum _EFI_USBFN_ENDPOINT_DIRECTION {
EfiUsbEndpointDirectionHostOut = 0,
EfiUsbEndpointDirectionHostIn,
EfiUsbEndpointDirectionDeviceTx = EfiUsbEndpointDirectionHostIn,
EfiUsbEndpointDirectionDeviceRx = EfiUsbEndpointDirectionHostOut
} EFI_USBFN_ENDPOINT_DIRECTION;
typedef enum _EFI_USBFN_MESSAGE {
//
// Nothing
//
EfiUsbMsgNone = 0,
//
// SETUP packet is received, returned Buffer contains
// EFI_USB_DEVICE_REQUEST struct
//
EfiUsbMsgSetupPacket,
//
// Indicates that some of the requested data has been received from the
// host. It is the responsibility of the class driver to determine if it
// needs to wait for any remaining data. Returned Buffer contains
// EFI_USBFN_TRANSFER_RESULT struct containing endpoint number, transfer
// status and count of bytes received.
//
EfiUsbMsgEndpointStatusChangedRx,
//
// Indicates that some of the requested data has been transmitted to the
// host. It is the responsibility of the class driver to determine if any
// remaining data needs to be resent. Returned Buffer contains
// EFI_USBFN_TRANSFER_RESULT struct containing endpoint number, transfer
// status and count of bytes sent.
//
EfiUsbMsgEndpointStatusChangedTx,
//
// DETACH bus event signaled
//
EfiUsbMsgBusEventDetach,
//
// ATTACH bus event signaled
//
EfiUsbMsgBusEventAttach,
//
// RESET bus event signaled
//
EfiUsbMsgBusEventReset,
//
// SUSPEND bus event signaled
//
EfiUsbMsgBusEventSuspend,
//
// RESUME bus event signaled
//
EfiUsbMsgBusEventResume,
//
// Bus speed updated, returned buffer indicated bus speed using
// following enumeration named EFI_USB_BUS_SPEED
//
EfiUsbMsgBusEventSpeed
} EFI_USBFN_MESSAGE;
typedef enum _EFI_USBFN_TRANSFER_STATUS {
UsbTransferStatusUnknown = 0,
UsbTransferStatusComplete,
UsbTransferStatusAborted,
UsbTransferStatusActive,
UsbTransferStatusNone
} EFI_USBFN_TRANSFER_STATUS;
typedef struct _EFI_USBFN_TRANSFER_RESULT {
UINTN BytesTransferred;
EFI_USBFN_TRANSFER_STATUS TransferStatus;
UINT8 EndpointIndex;
EFI_USBFN_ENDPOINT_DIRECTION Direction;
VOID *Buffer;
} EFI_USBFN_TRANSFER_RESULT;
typedef enum _EFI_USB_BUS_SPEED {
UsbBusSpeedUnknown = 0,
UsbBusSpeedLow,
UsbBusSpeedFull,
UsbBusSpeedHigh,
UsbBusSpeedSuper,
UsbBusSpeedMaximum = UsbBusSpeedSuper
} EFI_USB_BUS_SPEED;
typedef union _EFI_USBFN_MESSAGE_PAYLOAD {
EFI_USB_DEVICE_REQUEST udr;
EFI_USBFN_TRANSFER_RESULT utr;
EFI_USB_BUS_SPEED ubs;
} EFI_USBFN_MESSAGE_PAYLOAD;
typedef enum _EFI_USBFN_POLICY_TYPE {
EfiUsbPolicyUndefined = 0,
EfiUsbPolicyMaxTransactionSize,
EfiUsbPolicyZeroLengthTerminationSupport,
EfiUsbPolicyZeroLengthTermination
} EFI_USBFN_POLICY_TYPE;
/**
Returns information about what USB port type was attached.
@param[in] This A pointer to the EFI_USBFN_IO_PROTOCOL instance.
@param[out] PortType Returns the USB port type.
@retval EFI_SUCCESS The function returned successfully.
@retval EFI_INVALID_PARAMETER A parameter is invalid.
@retval EFI_DEVICE_ERROR The physical device reported an error.
@retval EFI_NOT_READY The physical device is busy or not ready to
process this request or there is no USB port
attached to the device.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_USBFN_IO_DETECT_PORT) (
IN EFI_USBFN_IO_PROTOCOL *This,
OUT EFI_USBFN_PORT_TYPE *PortType
);
/**
Configures endpoints based on supplied device and configuration descriptors.
Assuming that the hardware has already been initialized, this function configures
the endpoints using the device information supplied by DeviceInfo, activates the
port, and starts receiving USB events.
This function must ignore the bMaxPacketSize0field of the Standard Device Descriptor
and the wMaxPacketSize field of the Standard Endpoint Descriptor that are made
available through DeviceInfo.
@param[in] This A pointer to the EFI_USBFN_IO_PROTOCOL instance.
@param[out] DeviceInfo A pointer to EFI_USBFN_DEVICE_INFO instance.
@retval EFI_SUCCESS The function returned successfully.
@retval EFI_INVALID_PARAMETER A parameter is invalid.
@retval EFI_DEVICE_ERROR The physical device reported an error.
@retval EFI_NOT_READY The physical device is busy or not ready to process
this request.
@retval EFI_OUT_OF_RESOURCES The request could not be completed due to lack of
resources.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_USBFN_IO_CONFIGURE_ENABLE_ENDPOINTS) (
IN EFI_USBFN_IO_PROTOCOL *This,
OUT EFI_USB_DEVICE_INFO *DeviceInfo
);
/**
Returns the maximum packet size of the specified endpoint type for the supplied
bus speed.
If the BusSpeed is UsbBusSpeedUnknown, the maximum speed the underlying controller
supports is assumed.
This protocol currently does not support isochronous or interrupt transfers. Future
revisions of this protocol may eventually support it.
@param[in] This A pointer to the EFI_USBFN_IO_PROTOCOLinstance.
@param[in] EndpointType Endpoint type as defined as EFI_USB_ENDPOINT_TYPE.
@param[in] BusSpeed Bus speed as defined as EFI_USB_BUS_SPEED.
@param[out] MaxPacketSize The maximum packet size, in bytes, of the specified
endpoint type.
@retval EFI_SUCCESS The function returned successfully.
@retval EFI_INVALID_PARAMETER A parameter is invalid.
@retval EFI_DEVICE_ERROR The physical device reported an error.
@retval EFI_NOT_READY The physical device is busy or not ready to process
this request.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_USBFN_IO_GET_ENDPOINT_MAXPACKET_SIZE) (
IN EFI_USBFN_IO_PROTOCOL *This,
IN EFI_USB_ENDPOINT_TYPE EndpointType,
IN EFI_USB_BUS_SPEED BusSpeed,
OUT UINT16 *MaxPacketSize
);
/**
Returns device specific information based on the supplied identifier as a Unicode string.
If the supplied Buffer isn't large enough, or is NULL, the method fails with
EFI_BUFFER_TOO_SMALL and the required size is returned through BufferSize. All returned
strings are in Unicode format.
An Id of EfiUsbDeviceInfoUnknown is treated as an invalid parameter.
@param[in] This A pointer to the EFI_USBFN_IO_PROTOCOLinstance.
@param[in] Id The requested information id.
@param[in] BufferSize On input, the size of the Buffer in bytes. On output, the
amount of data returned in Buffer in bytes.
@param[out] Buffer A pointer to a buffer to returnthe requested information
as a Unicode string.
@retval EFI_SUCCESS The function returned successfully.
@retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:
BufferSize is NULL.
*BufferSize is not 0 and Buffer is NULL.
Id in invalid.
@retval EFI_DEVICE_ERROR The physical device reported an error.
@retval EFI_BUFFER_TOO_SMALL The buffer is too small to hold the buffer.
*BufferSize has been updated with the size needed to hold the request string.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_USBFN_IO_GET_DEVICE_INFO) (
IN EFI_USBFN_IO_PROTOCOL *This,
IN EFI_USBFN_DEVICE_INFO_ID Id,
IN OUT UINTN *BufferSize,
OUT VOID *Buffer OPTIONAL
);
/**
Returns the vendor-id and product-id of the device.
@param[in] This A pointer to the EFI_USBFN_IO_PROTOCOL instance.
@param[out] Vid Returned vendor-id of the device.
@param[out] Pid Returned product-id of the device.
@retval EFI_SUCCESS The function returned successfully.
@retval EFI_INVALID_PARAMETER A parameter is invalid.
@retval EFI_NOT_FOUND Unable to return the vendor-id or the product-id.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_USBFN_IO_GET_VENDOR_ID_PRODUCT_ID) (
IN EFI_USBFN_IO_PROTOCOL *This,
OUT UINT16 *Vid,
OUT UINT16 *Pid
);
/**
Aborts the transfer on the specified endpoint.
This function should fail with EFI_INVALID_PARAMETER if the specified direction
is incorrect for the endpoint.
@param[in] This A pointer to the EFI_USBFN_IO_PROTOCOL instance.
@param[in] EndpointIndex Indicates the endpoint on which the ongoing transfer
needs to be canceled.
@param[in] Direction Direction of the endpoint.
@retval EFI_SUCCESS The function returned successfully.
@retval EFI_INVALID_PARAMETER A parameter is invalid.
@retval EFI_DEVICE_ERROR The physical device reported an error.
@retval EFI_NOT_READY The physical device is busy or not ready to process
this request.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_USBFN_IO_ABORT_TRANSFER) (
IN EFI_USBFN_IO_PROTOCOL *This,
IN UINT8 EndpointIndex,
IN EFI_USBFN_ENDPOINT_DIRECTION Direction
);
/**
Returns the stall state on the specified endpoint.
This function should fail with EFI_INVALID_PARAMETER if the specified direction
is incorrect for the endpoint.
@param[in] This A pointer to the EFI_USBFN_IO_PROTOCOL instance.
@param[in] EndpointIndex Indicates the endpoint.
@param[in] Direction Direction of the endpoint.
@param[in, out] State Boolean, true value indicates that the endpoint
is in a stalled state, false otherwise.
@retval EFI_SUCCESS The function returned successfully.
@retval EFI_INVALID_PARAMETER A parameter is invalid.
@retval EFI_DEVICE_ERROR The physical device reported an error.
@retval EFI_NOT_READY The physical device is busy or not ready to process
this request.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_USBFN_IO_GET_ENDPOINT_STALL_STATE) (
IN EFI_USBFN_IO_PROTOCOL *This,
IN UINT8 EndpointIndex,
IN EFI_USBFN_ENDPOINT_DIRECTION Direction,
IN OUT BOOLEAN *State
);
/**
Sets or clears the stall state on the specified endpoint.
This function should fail with EFI_INVALID_PARAMETER if the specified direction
is incorrect for the endpoint.
@param[in] This A pointer to the EFI_USBFN_IO_PROTOCOL instance.
@param[in] EndpointIndex Indicates the endpoint.
@param[in] Direction Direction of the endpoint.
@param[in] State Requested stall state on the specified endpoint.
True value causes the endpoint to stall; false
value clears an existing stall.
@retval EFI_SUCCESS The function returned successfully.
@retval EFI_INVALID_PARAMETER A parameter is invalid.
@retval EFI_DEVICE_ERROR The physical device reported an error.
@retval EFI_NOT_READY The physical device is busy or not ready to process
this request.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_USBFN_IO_SET_ENDPOINT_STALL_STATE) (
IN EFI_USBFN_IO_PROTOCOL *This,
IN UINT8 EndpointIndex,
IN EFI_USBFN_ENDPOINT_DIRECTION Direction,
IN OUT BOOLEAN *State
);
/**
This function is called repeatedly to get information on USB bus states,
receive-completion and transmit-completion events on the endpoints, and
notification on setup packet on endpoint 0.
A class driver must call EFI_USBFN_IO_PROTOCOL.EventHandler()repeatedly
to receive updates on the transfer status and number of bytes transferred
on various endpoints.
@param[in] This A pointer to the EFI_USBFN_IO_PROTOCOL instance.
@param[out] Message Indicates the event that initiated this notification.
@param[in, out] PayloadSize On input, the size of the memory pointed by
Payload. On output, the amount ofdata returned
in Payload.
@param[out] Payload A pointer to EFI_USBFN_MESSAGE_PAYLOAD instance
to return additional payload for current message.
@retval EFI_SUCCESS The function returned successfully.
@retval EFI_INVALID_PARAMETER A parameter is invalid.
@retval EFI_DEVICE_ERROR The physical device reported an error.
@retval EFI_NOT_READY The physical device is busy or not ready to process
this request.
@retval EFI_BUFFER_TOO_SMALL The Supplied buffer is not large enough to hold
the message payload.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_USBFN_IO_EVENTHANDLER) (
IN EFI_USBFN_IO_PROTOCOL *This,
OUT EFI_USBFN_MESSAGE *Message,
IN OUT UINTN *PayloadSize,
OUT EFI_USBFN_MESSAGE_PAYLOAD *Payload
);
/**
This function handles transferring data to or from the host on the specified
endpoint, depending on the direction specified.
A class driver must call EFI_USBFN_IO_PROTOCOL.EventHandler() repeatedly to
receive updates on the transfer status and the number of bytes transferred on
various endpoints. Upon an update of the transfer status, the Buffer field of
the EFI_USBFN_TRANSFER_RESULT structure (as described in the function description
for EFI_USBFN_IO_PROTOCOL.EventHandler()) must be initialized with the Buffer
pointer that was supplied to this method.
The overview of the call sequence is illustrated in the Figure 54.
This function should fail with EFI_INVALID_PARAMETER if the specified direction
is incorrect for the endpoint.
@param[in] This A pointer to the EFI_USBFN_IO_PROTOCOL instance.
@param[in] EndpointIndex Indicates the endpoint on which TX or RX transfer
needs to take place.
@param[in] Direction Direction of the endpoint.
@param[in, out] BufferSize If Direction is EfiUsbEndpointDirectionDeviceRx:
On input, the size of the Bufferin bytes.
On output, the amount of data returned in Buffer
in bytes.
If Direction is EfiUsbEndpointDirectionDeviceTx:
On input, the size of the Bufferin bytes.
On output, the amount of data transmitted in bytes.
@param[in, out] Buffer If Direction is EfiUsbEndpointDirectionDeviceRx:
The Buffer to return the received data.
If Directionis EfiUsbEndpointDirectionDeviceTx:
The Buffer that contains the data to be transmitted.
@retval EFI_SUCCESS The function returned successfully.
@retval EFI_INVALID_PARAMETER A parameter is invalid.
@retval EFI_DEVICE_ERROR The physical device reported an error.
@retval EFI_NOT_READY The physical device is busy or not ready to process
this request.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_USBFN_IO_TRANSFER) (
IN EFI_USBFN_IO_PROTOCOL *This,
IN UINT8 EndpointIndex,
IN EFI_USBFN_ENDPOINT_DIRECTION Direction,
IN OUT UINTN *BufferSize,
IN OUT VOID *Buffer
);
/**
Returns the maximum supported transfer size.
Returns the maximum number of bytes that the underlying controller can accommodate
in a single transfer.
@param[in] This A pointer to the EFI_USBFN_IO_PROTOCOL instance.
@param[out] MaxTransferSize The maximum supported transfer size, in bytes.
@retval EFI_SUCCESS The function returned successfully.
@retval EFI_INVALID_PARAMETER A parameter is invalid.
@retval EFI_DEVICE_ERROR The physical device reported an error.
@retval EFI_NOT_READY The physical device is busy or not ready to process
this request.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_USBFN_IO_GET_MAXTRANSFER_SIZE) (
IN EFI_USBFN_IO_PROTOCOL *This,
OUT UINTN *MaxTransferSize
);
/**
Allocates a transfer buffer of the specified sizethat satisfies the controller
requirements.
The AllocateTransferBuffer() function allocates a memory region of Size bytes and
returns the address of the allocated memory that satisfies the underlying controller
requirements in the location referenced by Buffer.
The allocated transfer buffer must be freed using a matching call to
EFI_USBFN_IO_PROTOCOL.FreeTransferBuffer()function.
@param[in] This A pointer to the EFI_USBFN_IO_PROTOCOL instance.
@param[in] Size The number of bytes to allocate for the transfer buffer.
@param[out] Buffer A pointer to a pointer to the allocated buffer if the
call succeeds; undefined otherwise.
@retval EFI_SUCCESS The function returned successfully.
@retval EFI_INVALID_PARAMETER A parameter is invalid.
@retval EFI_OUT_OF_RESOURCES The requested transfer buffer could not be allocated.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_USBFN_IO_ALLOCATE_TRANSFER_BUFFER) (
IN EFI_USBFN_IO_PROTOCOL *This,
IN UINTN Size,
OUT VOID **Buffer
);
/**
Deallocates the memory allocated for the transfer buffer by the
EFI_USBFN_IO_PROTOCOL.AllocateTransferBuffer() function.
The EFI_USBFN_IO_PROTOCOL.FreeTransferBuffer() function deallocates the
memory specified by Buffer. The Buffer that is freed must have been allocated
by EFI_USBFN_IO_PROTOCOL.AllocateTransferBuffer().
@param[in] This A pointer to the EFI_USBFN_IO_PROTOCOL instance.
@param[in] Buffer A pointer to the transfer buffer to deallocate.
@retval EFI_SUCCESS The function returned successfully.
@retval EFI_INVALID_PARAMETER A parameter is invalid.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_USBFN_IO_FREE_TRANSFER_BUFFER) (
IN EFI_USBFN_IO_PROTOCOL *This,
IN VOID *Buffer
);
/**
This function supplies power to the USB controller if needed and initializes
the hardware and the internal data structures. The port must not be activated
by this function.
@param[in] This A pointer to the EFI_USBFN_IO_PROTOCOL instance.
@retval EFI_SUCCESS The function returned successfully.
@retval EFI_INVALID_PARAMETER A parameter is invalid.
@retval EFI_DEVICE_ERROR The physical device reported an error.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_USBFN_IO_START_CONTROLLER) (
IN EFI_USBFN_IO_PROTOCOL *This
);
/**
This function stops the USB hardware device.
@param[in] This A pointer to the EFI_USBFN_IO_PROTOCOL instance.
@retval EFI_SUCCESS The function returned successfully.
@retval EFI_INVALID_PARAMETER A parameter is invalid.
@retval EFI_DEVICE_ERROR The physical device reported an error.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_USBFN_IO_STOP_CONTROLLER) (
IN EFI_USBFN_IO_PROTOCOL *This
);
/**
This function sets the configuration policy for the specified non-control
endpoint.
This function can only be called before EFI_USBFN_IO_PROTOCOL.StartController()
or after EFI_USBFN_IO_PROTOCOL.StopController() has been called.
@param[in] This A pointer to the EFI_USBFN_IO_PROTOCOL instance.
@param[in] EndpointIndex Indicates the non-control endpoint for which the
policy needs to be set.
@param[in] Direction Direction of the endpoint.
@param[in] PolicyType Policy type the user is trying to set for the
specified non-control endpoint.
@param[in] BufferSize The size of the Bufferin bytes.
@param[in] Buffer The new value for the policy parameter that
PolicyType specifies.
@retval EFI_SUCCESS The function returned successfully.
@retval EFI_INVALID_PARAMETER A parameter is invalid.
@retval EFI_DEVICE_ERROR The physical device reported an error.
@retval EFI_UNSUPPORTED Changing this policy value is not supported.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_USBFN_IO_SET_ENDPOINT_POLICY) (
IN EFI_USBFN_IO_PROTOCOL *This,
IN UINT8 EndpointIndex,
IN EFI_USBFN_ENDPOINT_DIRECTION Direction,
IN EFI_USBFN_POLICY_TYPE PolicyType,
IN UINTN BufferSize,
IN VOID *Buffer
);
/**
This function sets the configuration policy for the specified non-control
endpoint.
This function can only be called before EFI_USBFN_IO_PROTOCOL.StartController()
or after EFI_USBFN_IO_PROTOCOL.StopController() has been called.
@param[in] This A pointer to the EFI_USBFN_IO_PROTOCOL instance.
@param[in] EndpointIndex Indicates the non-control endpoint for which the
policy needs to be set.
@param[in] Direction Direction of the endpoint.
@param[in] PolicyType Policy type the user is trying to retrieve for
the specified non-control endpoint.
@param[in, out] BufferSize On input, the size of Bufferin bytes. On output,
the amount of data returned in Bufferin bytes.
@param[in, out] Buffer A pointer to a buffer to return requested endpoint
policy value.
@retval EFI_SUCCESS The function returned successfully.
@retval EFI_INVALID_PARAMETER A parameter is invalid.
@retval EFI_DEVICE_ERROR The specified policy value is not supported.
@retval EFI_BUFFER_TOO_SMALL Supplied buffer is not large enough to hold requested
policy value.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_USBFN_IO_GET_ENDPOINT_POLICY) (
IN EFI_USBFN_IO_PROTOCOL *This,
IN UINT8 EndpointIndex,
IN EFI_USBFN_ENDPOINT_DIRECTION Direction,
IN EFI_USBFN_POLICY_TYPE PolicyType,
IN OUT UINTN *BufferSize,
IN OUT VOID *Buffer
);
///
/// The EFI_USBFN_IO_PROTOCOL provides basic data transactions and basic USB
/// controller management for a USB Function port.
///
struct _EFI_USBFN_IO_PROTOCOL {
UINT32 Revision;
EFI_USBFN_IO_DETECT_PORT DetectPort;
EFI_USBFN_IO_CONFIGURE_ENABLE_ENDPOINTS ConfigureEnableEndpoints;
EFI_USBFN_IO_GET_ENDPOINT_MAXPACKET_SIZE GetEndpointMaxPacketSize;
EFI_USBFN_IO_GET_DEVICE_INFO GetDeviceInfo;
EFI_USBFN_IO_GET_VENDOR_ID_PRODUCT_ID GetVendorIdProductId;
EFI_USBFN_IO_ABORT_TRANSFER AbortTransfer;
EFI_USBFN_IO_GET_ENDPOINT_STALL_STATE GetEndpointStallState;
EFI_USBFN_IO_SET_ENDPOINT_STALL_STATE SetEndpointStallState;
EFI_USBFN_IO_EVENTHANDLER EventHandler;
EFI_USBFN_IO_TRANSFER Transfer;
EFI_USBFN_IO_GET_MAXTRANSFER_SIZE GetMaxTransferSize;
EFI_USBFN_IO_ALLOCATE_TRANSFER_BUFFER AllocateTransferBuffer;
EFI_USBFN_IO_FREE_TRANSFER_BUFFER FreeTransferBuffer;
EFI_USBFN_IO_START_CONTROLLER StartController;
EFI_USBFN_IO_STOP_CONTROLLER StopController;
EFI_USBFN_IO_SET_ENDPOINT_POLICY SetEndpointPolicy;
EFI_USBFN_IO_GET_ENDPOINT_POLICY GetEndpointPolicy;
};
extern EFI_GUID gEfiUsbFunctionIoProtocolGuid;
#endif
Reference in New Issue View Git Blame Copy Permalink