audk/IntelFrameworkModulePkg/Include/Protocol/VgaMiniPort.h

95 lines
3.3 KiB
C

/** @file
The VGA Mini Port Protocol used to set the text display mode of a VGA controller.
Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials are licensed and made available under
the terms and conditions of the BSD License that accompanies this distribution.
The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php.
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#ifndef __VGA_MINI_PORT_H_
#define __VGA_MINI_PORT_H_
///
/// Global ID for the EFI_VGA_MINI_PORT_PROTOCOL.
///
#define EFI_VGA_MINI_PORT_PROTOCOL_GUID \
{ \
0xc7735a2f, 0x88f5, 0x4882, {0xae, 0x63, 0xfa, 0xac, 0x8c, 0x8b, 0x86, 0xb3 } \
}
///
/// Forward declaration for the EFI_VGA_MINI_PORT_PROTOCOL.
///
typedef struct _EFI_VGA_MINI_PORT_PROTOCOL EFI_VGA_MINI_PORT_PROTOCOL;
/**
Sets the text display mode of a VGA controller.
Sets the text display mode of the VGA controller to the mode specified by
ModeNumber. A ModeNumber of 0 is a request for an 80x25 text mode. A
ModeNumber of 1 is a request for an 80x50 text mode. If ModeNumber is greater
than MaxModeNumber, then EFI_UNSUPPORTED is returned. If the VGA controller
is not functioning properly, then EFI_DEVICE_ERROR is returned. If the VGA
controller is sucessfully set to the mode number specified by ModeNumber, then
EFI_SUCCESS is returned.
@param[in] This A pointer to the EFI_VGA_MINI_PORT_PROTOCOL instance.
@param[in] ModeNumber The requested mode number. 0 for 80x25. 1 for 80x5.
@retval EFI_SUCCESS The mode number was set.
@retval EFI_UNSUPPORTED The mode number specified by ModeNumber is not supported.
@retval EFI_DEVICE_ERROR The device is not functioning properly.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_VGA_MINI_PORT_SET_MODE)(
IN EFI_VGA_MINI_PORT_PROTOCOL *This,
IN UINTN ModeNumber
);
struct _EFI_VGA_MINI_PORT_PROTOCOL {
EFI_VGA_MINI_PORT_SET_MODE SetMode;
///
/// MMIO base address of the VGA text mode framebuffer. Typically set to 0xB8000.
///
UINT64 VgaMemoryOffset;
///
/// I/O Port address for the VGA CRTC address register. Typically set to 0x3D4.
///
UINT64 CrtcAddressRegisterOffset;
///
/// I/O Port address for the VGA CRTC data register. Typically set to 0x3D5.
///
UINT64 CrtcDataRegisterOffset;
///
/// PCI Controller MMIO BAR index of the VGA text mode frame buffer. Typically
/// set to EFI_PCI_IO_PASS_THROUGH_BAR
///
UINT8 VgaMemoryBar;
///
/// PCI Controller I/O BAR index of the VGA CRTC address register. Typically
/// set to EFI_PCI_IO_PASS_THROUGH_BAR
///
UINT8 CrtcAddressRegisterBar;
///
/// PCI Controller I/O BAR index of the VGA CRTC data register. Typically set
/// to EFI_PCI_IO_PASS_THROUGH_BAR
///
UINT8 CrtcDataRegisterBar;
///
/// The maximum number of text modes that this VGA controller supports.
///
UINT8 MaxMode;
};
extern EFI_GUID gEfiVgaMiniPortProtocolGuid;
#endif