audk/MdePkg/Include/Protocol/PxeBaseCode.h

688 lines
33 KiB
C

/** @file
EFI PXE Base Code Protocol definitions, which is used to access PXE-compatible
devices for network access and network booting.
Copyright (c) 2006 - 2008, Intel Corporation
All rights reserved. This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#ifndef __PXE_BASE_CODE_PROTOCOL_H__
#define __PXE_BASE_CODE_PROTOCOL_H__
///
/// PXE Base Code protocol
///
#define EFI_PXE_BASE_CODE_PROTOCOL_GUID \
{ \
0x03c4e603, 0xac28, 0x11d3, {0x9a, 0x2d, 0x00, 0x90, 0x27, 0x3f, 0xc1, 0x4d } \
}
typedef struct _EFI_PXE_BASE_CODE_PROTOCOL EFI_PXE_BASE_CODE_PROTOCOL;
///
/// Protocol defined in EFI1.1.
///
typedef EFI_PXE_BASE_CODE_PROTOCOL EFI_PXE_BASE_CODE;
///
/// Default IP TTL and ToS.
///
#define DEFAULT_TTL 16
#define DEFAULT_ToS 0
///
/// ICMP error format
///
typedef struct {
UINT8 Type;
UINT8 Code;
UINT16 Checksum;
union {
UINT32 reserved;
UINT32 Mtu;
UINT32 Pointer;
struct {
UINT16 Identifier;
UINT16 Sequence;
} Echo;
} u;
UINT8 Data[494];
} EFI_PXE_BASE_CODE_ICMP_ERROR;
///
/// TFTP error format
///
typedef struct {
UINT8 ErrorCode;
CHAR8 ErrorString[127];
} EFI_PXE_BASE_CODE_TFTP_ERROR;
///
/// IP Receive Filter definitions
///
#define EFI_PXE_BASE_CODE_MAX_IPCNT 8
typedef struct {
UINT8 Filters;
UINT8 IpCnt;
UINT16 reserved;
EFI_IP_ADDRESS IpList[EFI_PXE_BASE_CODE_MAX_IPCNT];
} EFI_PXE_BASE_CODE_IP_FILTER;
#define EFI_PXE_BASE_CODE_IP_FILTER_STATION_IP 0x0001
#define EFI_PXE_BASE_CODE_IP_FILTER_BROADCAST 0x0002
#define EFI_PXE_BASE_CODE_IP_FILTER_PROMISCUOUS 0x0004
#define EFI_PXE_BASE_CODE_IP_FILTER_PROMISCUOUS_MULTICAST 0x0008
///
/// ARP Cache definitions
///
typedef struct {
EFI_IP_ADDRESS IpAddr;
EFI_MAC_ADDRESS MacAddr;
} EFI_PXE_BASE_CODE_ARP_ENTRY;
typedef struct {
EFI_IP_ADDRESS IpAddr;
EFI_IP_ADDRESS SubnetMask;
EFI_IP_ADDRESS GwAddr;
} EFI_PXE_BASE_CODE_ROUTE_ENTRY;
//
// UDP definitions
//
typedef UINT16 EFI_PXE_BASE_CODE_UDP_PORT;
#define EFI_PXE_BASE_CODE_UDP_OPFLAGS_ANY_SRC_IP 0x0001
#define EFI_PXE_BASE_CODE_UDP_OPFLAGS_ANY_SRC_PORT 0x0002
#define EFI_PXE_BASE_CODE_UDP_OPFLAGS_ANY_DEST_IP 0x0004
#define EFI_PXE_BASE_CODE_UDP_OPFLAGS_ANY_DEST_PORT 0x0008
#define EFI_PXE_BASE_CODE_UDP_OPFLAGS_USE_FILTER 0x0010
#define EFI_PXE_BASE_CODE_UDP_OPFLAGS_MAY_FRAGMENT 0x0020
//
// Discover() definitions
//
#define EFI_PXE_BASE_CODE_BOOT_TYPE_BOOTSTRAP 0
#define EFI_PXE_BASE_CODE_BOOT_TYPE_MS_WINNT_RIS 1
#define EFI_PXE_BASE_CODE_BOOT_TYPE_INTEL_LCM 2
#define EFI_PXE_BASE_CODE_BOOT_TYPE_DOSUNDI 3
#define EFI_PXE_BASE_CODE_BOOT_TYPE_NEC_ESMPRO 4
#define EFI_PXE_BASE_CODE_BOOT_TYPE_IBM_WSoD 5
#define EFI_PXE_BASE_CODE_BOOT_TYPE_IBM_LCCM 6
#define EFI_PXE_BASE_CODE_BOOT_TYPE_CA_UNICENTER_TNG 7
#define EFI_PXE_BASE_CODE_BOOT_TYPE_HP_OPENVIEW 8
#define EFI_PXE_BASE_CODE_BOOT_TYPE_ALTIRIS_9 9
#define EFI_PXE_BASE_CODE_BOOT_TYPE_ALTIRIS_10 10
#define EFI_PXE_BASE_CODE_BOOT_TYPE_ALTIRIS_11 11
#define EFI_PXE_BASE_CODE_BOOT_TYPE_NOT_USED_12 12
#define EFI_PXE_BASE_CODE_BOOT_TYPE_REDHAT_INSTALL 13
#define EFI_PXE_BASE_CODE_BOOT_TYPE_REDHAT_BOOT 14
#define EFI_PXE_BASE_CODE_BOOT_TYPE_REMBO 15
#define EFI_PXE_BASE_CODE_BOOT_TYPE_BEOBOOT 16
//
// 17 through 32767 are reserved
// 32768 through 65279 are for vendor use
// 65280 through 65534 are reserved
//
#define EFI_PXE_BASE_CODE_BOOT_TYPE_PXETEST 65535
#define EFI_PXE_BASE_CODE_BOOT_LAYER_MASK 0x7FFF
#define EFI_PXE_BASE_CODE_BOOT_LAYER_INITIAL 0x0000
///
/// Discover() server list structure.
///
typedef struct {
UINT16 Type;
BOOLEAN AcceptAnyResponse;
UINT8 Reserved;
EFI_IP_ADDRESS IpAddr;
} EFI_PXE_BASE_CODE_SRVLIST;
///
/// Discover() information override structure.
///
typedef struct {
BOOLEAN UseMCast;
BOOLEAN UseBCast;
BOOLEAN UseUCast;
BOOLEAN MustUseList;
EFI_IP_ADDRESS ServerMCastIp;
UINT16 IpCnt;
EFI_PXE_BASE_CODE_SRVLIST SrvList[1];
} EFI_PXE_BASE_CODE_DISCOVER_INFO;
///
/// Mtftp() definitions
///
typedef enum {
EFI_PXE_BASE_CODE_TFTP_FIRST,
EFI_PXE_BASE_CODE_TFTP_GET_FILE_SIZE,
EFI_PXE_BASE_CODE_TFTP_READ_FILE,
EFI_PXE_BASE_CODE_TFTP_WRITE_FILE,
EFI_PXE_BASE_CODE_TFTP_READ_DIRECTORY,
EFI_PXE_BASE_CODE_MTFTP_GET_FILE_SIZE,
EFI_PXE_BASE_CODE_MTFTP_READ_FILE,
EFI_PXE_BASE_CODE_MTFTP_READ_DIRECTORY,
EFI_PXE_BASE_CODE_MTFTP_LAST
} EFI_PXE_BASE_CODE_TFTP_OPCODE;
typedef struct {
EFI_IP_ADDRESS MCastIp;
EFI_PXE_BASE_CODE_UDP_PORT CPort;
EFI_PXE_BASE_CODE_UDP_PORT SPort;
UINT16 ListenTimeout;
UINT16 TransmitTimeout;
} EFI_PXE_BASE_CODE_MTFTP_INFO;
//
// PXE Base Code Mode structure
//
#define EFI_PXE_BASE_CODE_MAX_ARP_ENTRIES 8
#define EFI_PXE_BASE_CODE_MAX_ROUTE_ENTRIES 8
typedef struct {
BOOLEAN Started;
BOOLEAN Ipv6Available;
BOOLEAN Ipv6Supported;
BOOLEAN UsingIpv6;
BOOLEAN BisSupported;
BOOLEAN BisDetected;
BOOLEAN AutoArp;
BOOLEAN SendGUID;
BOOLEAN DhcpDiscoverValid;
BOOLEAN DhcpAckReceived;
BOOLEAN ProxyOfferReceived;
BOOLEAN PxeDiscoverValid;
BOOLEAN PxeReplyReceived;
BOOLEAN PxeBisReplyReceived;
BOOLEAN IcmpErrorReceived;
BOOLEAN TftpErrorReceived;
BOOLEAN MakeCallbacks;
UINT8 TTL;
UINT8 ToS;
EFI_IP_ADDRESS StationIp;
EFI_IP_ADDRESS SubnetMask;
EFI_PXE_BASE_CODE_PACKET DhcpDiscover;
EFI_PXE_BASE_CODE_PACKET DhcpAck;
EFI_PXE_BASE_CODE_PACKET ProxyOffer;
EFI_PXE_BASE_CODE_PACKET PxeDiscover;
EFI_PXE_BASE_CODE_PACKET PxeReply;
EFI_PXE_BASE_CODE_PACKET PxeBisReply;
EFI_PXE_BASE_CODE_IP_FILTER IpFilter;
UINT32 ArpCacheEntries;
EFI_PXE_BASE_CODE_ARP_ENTRY ArpCache[EFI_PXE_BASE_CODE_MAX_ARP_ENTRIES];
UINT32 RouteTableEntries;
EFI_PXE_BASE_CODE_ROUTE_ENTRY RouteTable[EFI_PXE_BASE_CODE_MAX_ROUTE_ENTRIES];
EFI_PXE_BASE_CODE_ICMP_ERROR IcmpError;
EFI_PXE_BASE_CODE_TFTP_ERROR TftpError;
} EFI_PXE_BASE_CODE_MODE;
//
// PXE Base Code Interface Function definitions
//
/**
Enables the use of the PXE Base Code Protocol functions.
@param This Pointer to the EFI_PXE_BASE_CODE_PROTOCOL instance.
@param UseIpv6 Specifies the type of IP addresses that are to be used during the session
that is being started. Set to TRUE for IPv6 addresses, and FALSE for
IPv4 addresses.
@retval EFI_SUCCESS The PXE Base Code Protocol was started.
@retval EFI_DEVICE_ERROR The network device encountered an error during this oper
@retval EFI_UNSUPPORTED UseIpv6 is TRUE, but the Ipv6Supported field of the
EFI_PXE_BASE_CODE_MODE structure is FALSE.
@retval EFI_ALREADY_STARTED The PXE Base Code Protocol is already in the started state.
@retval EFI_INVALID_PARAMETER The This parameter is NULL or does not point to a valid
EFI_PXE_BASE_CODE_PROTOCOL structure.
@retval EFI_OUT_OF_RESOURCES Could not allocate enough memory or other resources to start the
PXE Base Code Protocol.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_PXE_BASE_CODE_START)(
IN EFI_PXE_BASE_CODE_PROTOCOL *This,
IN BOOLEAN UseIpv6
);
/**
Disables the use of the PXE Base Code Protocol functions.
@param This Pointer to the EFI_PXE_BASE_CODE_PROTOCOL instance.
@retval EFI_SUCCESS The PXE Base Code Protocol was stopped.
@retval EFI_NOT_STARTED The PXE Base Code Protocol is already in the stopped state.
@retval EFI_INVALID_PARAMETER The This parameter is NULL or does not point to a valid
EFI_PXE_BASE_CODE_PROTOCOL structure.
@retval EFI_DEVICE_ERROR The network device encountered an error during this operation.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_PXE_BASE_CODE_STOP)(
IN EFI_PXE_BASE_CODE_PROTOCOL *This
);
/**
Attempts to complete a DHCPv4 D.O.R.A. (discover / offer / request / acknowledge) or DHCPv6
S.A.R.R (solicit / advertise / request / reply) sequence.
@param This Pointer to the EFI_PXE_BASE_CODE_PROTOCOL instance.
@param SortOffers TRUE if the offers received should be sorted. Set to FALSE to try the
offers in the order that they are received.
@retval EFI_SUCCESS Valid DHCP has completed.
@retval EFI_NOT_STARTED The PXE Base Code Protocol is in the stopped state.
@retval EFI_INVALID_PARAMETER The This parameter is NULL or does not point to a valid
EFI_PXE_BASE_CODE_PROTOCOL structure.
@retval EFI_DEVICE_ERROR The network device encountered an error during this operation.
@retval EFI_OUT_OF_RESOURCES Could not allocate enough memory to complete the DHCP Protocol.
@retval EFI_ABORTED The callback function aborted the DHCP Protocol.
@retval EFI_TIMEOUT The DHCP Protocol timed out.
@retval EFI_ICMP_ERROR An ICMP error packet was received during the DHCP session.
@retval EFI_NO_RESPONSE Valid PXE offer was not received.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_PXE_BASE_CODE_DHCP)(
IN EFI_PXE_BASE_CODE_PROTOCOL *This,
IN BOOLEAN SortOffers
);
/**
Attempts to complete the PXE Boot Server and/or boot image discovery sequence.
@param This Pointer to the EFI_PXE_BASE_CODE_PROTOCOL instance.
@param Type The type of bootstrap to perform.
@param Layer Pointer to the boot server layer number to discover, which must be
PXE_BOOT_LAYER_INITIAL when a new server type is being
discovered.
@param UseBis TRUE if Boot Integrity Services are to be used. FALSE otherwise.
@param Info Pointer to a data structure that contains additional information on the
type of discovery operation that is to be performed.
@retval EFI_SUCCESS The Discovery sequence has been completed.
@retval EFI_NOT_STARTED The PXE Base Code Protocol is in the stopped state.
@retval EFI_INVALID_PARAMETER One or more parameters are invalid.
@retval EFI_DEVICE_ERROR The network device encountered an error during this operation.
@retval EFI_OUT_OF_RESOURCES Could not allocate enough memory to complete Discovery.
@retval EFI_ABORTED The callback function aborted the Discovery sequence.
@retval EFI_TIMEOUT The Discovery sequence timed out.
@retval EFI_ICMP_ERROR An ICMP error packet was received during the PXE discovery
session.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_PXE_BASE_CODE_DISCOVER)(
IN EFI_PXE_BASE_CODE_PROTOCOL *This,
IN UINT16 Type,
IN UINT16 *Layer,
IN BOOLEAN UseBis,
IN EFI_PXE_BASE_CODE_DISCOVER_INFO *Info OPTIONAL
);
/**
Used to perform TFTP and MTFTP services.
@param This Pointer to the EFI_PXE_BASE_CODE_PROTOCOL instance.
@param Operation The type of operation to perform.
@param BufferPtr A pointer to the data buffer.
@param Overwrite Only used on write file operations. TRUE if a file on a remote server can
be overwritten.
@param BufferSize For get-file-size operations, *BufferSize returns the size of the
requested file.
@param BlockSize The requested block size to be used during a TFTP transfer.
@param ServerIp The TFTP / MTFTP server IP address.
@param Filename A Null-terminated ASCII string that specifies a directory name or a file
name.
@param Info Pointer to the MTFTP information.
@param DontUseBuffer Set to FALSE for normal TFTP and MTFTP read file operation.
@retval EFI_SUCCESS The TFTP/MTFTP operation was completed.
@retval EFI_NOT_STARTED The PXE Base Code Protocol is in the stopped state.
@retval EFI_INVALID_PARAMETER One or more parameters are invalid.
@retval EFI_DEVICE_ERROR The network device encountered an error during this operation.
@retval EFI_BUFFER_TOO_SMALL The buffer is not large enough to complete the read operation.
@retval EFI_ABORTED The callback function aborted the TFTP/MTFTP operation.
@retval EFI_TIMEOUT The TFTP/MTFTP operation timed out.
@retval EFI_ICMP_ERROR An ICMP error packet was received during the MTFTP session.
@retval EFI_TFTP_ERROR A TFTP error packet was received during the MTFTP session.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_PXE_BASE_CODE_MTFTP)(
IN EFI_PXE_BASE_CODE_PROTOCOL *This,
IN EFI_PXE_BASE_CODE_TFTP_OPCODE Operation,
IN OUT VOID *BufferPtr OPTIONAL,
IN BOOLEAN Overwrite,
IN OUT UINT64 *BufferSize,
IN UINTN *BlockSize OPTIONAL,
IN EFI_IP_ADDRESS *ServerIp,
IN UINT8 *Filename OPTIONAL,
IN EFI_PXE_BASE_CODE_MTFTP_INFO *Info OPTIONAL,
IN BOOLEAN DontUseBuffer
);
/**
Writes a UDP packet to the network interface.
@param This Pointer to the EFI_PXE_BASE_CODE_PROTOCOL instance.
@param OpFlags The UDP operation flags.
@param DestIp The destination IP address.
@param DestPort The destination UDP port number.
@param GatewayIp The gateway IP address.
@param SrcIp The source IP address.
@param SrcPort The source UDP port number.
@param HeaderSize An optional field which may be set to the length of a header at
HeaderPtr to be prefixed to the data at BufferPtr.
@param HeaderPtr If HeaderSize is not NULL, a pointer to a header to be prefixed to the
data at BufferPtr.
@param BufferSize A pointer to the size of the data at BufferPtr.
@param BufferPtr A pointer to the data to be written.
@retval EFI_SUCCESS The UDP Write operation was completed.
@retval EFI_NOT_STARTED The PXE Base Code Protocol is in the stopped state.
@retval EFI_INVALID_PARAMETER One or more parameters are invalid.
@retval EFI_BAD_BUFFER_SIZE The buffer is too long to be transmitted.
@retval EFI_ABORTED The callback function aborted the UDP Write operation.
@retval EFI_TIMEOUT The UDP Write operation timed out.
@retval EFI_ICMP_ERROR An ICMP error packet was received during the UDP write session.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_PXE_BASE_CODE_UDP_WRITE)(
IN EFI_PXE_BASE_CODE_PROTOCOL *This,
IN UINT16 OpFlags,
IN EFI_IP_ADDRESS *DestIp,
IN EFI_PXE_BASE_CODE_UDP_PORT *DestPort,
IN EFI_IP_ADDRESS *GatewayIp, OPTIONAL
IN EFI_IP_ADDRESS *SrcIp, OPTIONAL
IN OUT EFI_PXE_BASE_CODE_UDP_PORT *SrcPort, OPTIONAL
IN UINTN *HeaderSize, OPTIONAL
IN VOID *HeaderPtr, OPTIONAL
IN UINTN *BufferSize,
IN VOID *BufferPtr
);
/**
Reads a UDP packet from the network interface.
@param This Pointer to the EFI_PXE_BASE_CODE_PROTOCOL instance.
@param OpFlags The UDP operation flags.
@param DestIp The destination IP address.
@param DestPort The destination UDP port number.
@param GatewayIp The gateway IP address.
@param SrcIp The source IP address.
@param SrcPort The source UDP port number.
@param HeaderSize An optional field which may be set to the length of a header at
HeaderPtr to be prefixed to the data at BufferPtr.
@param HeaderPtr If HeaderSize is not NULL, a pointer to a header to be prefixed to the
data at BufferPtr.
@param BufferSize A pointer to the size of the data at BufferPtr.
@param BufferPtr A pointer to the data to be read.
@retval EFI_SUCCESS The UDP Write operation was completed.
@retval EFI_NOT_STARTED The PXE Base Code Protocol is in the stopped state.
@retval EFI_INVALID_PARAMETER One or more parameters are invalid.
@retval EFI_DEVICE_ERROR The network device encountered an error during this operation.
@retval EFI_BUFFER_TOO_SMALL The packet is larger than Buffer can hold.
@retval EFI_ABORTED The callback function aborted the UDP Read operation.
@retval EFI_TIMEOUT The UDP Read operation timed out.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_PXE_BASE_CODE_UDP_READ)(
IN EFI_PXE_BASE_CODE_PROTOCOL *This,
IN UINT16 OpFlags,
IN OUT EFI_IP_ADDRESS *DestIp, OPTIONAL
IN OUT EFI_PXE_BASE_CODE_UDP_PORT *DestPort, OPTIONAL
IN OUT EFI_IP_ADDRESS *SrcIp, OPTIONAL
IN OUT EFI_PXE_BASE_CODE_UDP_PORT *SrcPort, OPTIONAL
IN UINTN *HeaderSize, OPTIONAL
IN VOID *HeaderPtr, OPTIONAL
IN OUT UINTN *BufferSize,
IN VOID *BufferPtr
);
/**
Updates the IP receive filters of a network device and enables software filtering.
@param This Pointer to the EFI_PXE_BASE_CODE_PROTOCOL instance.
@param NewFilter Pointer to the new set of IP receive filters.
@retval EFI_SUCCESS The IP receive filter settings were updated.
@retval EFI_NOT_STARTED The PXE Base Code Protocol is in the stopped state.
@retval EFI_INVALID_PARAMETER One or more parameters are invalid.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_PXE_BASE_CODE_SET_IP_FILTER)(
IN EFI_PXE_BASE_CODE_PROTOCOL *This,
IN EFI_PXE_BASE_CODE_IP_FILTER *NewFilter
);
/**
Uses the ARP protocol to resolve a MAC address.
@param This Pointer to the EFI_PXE_BASE_CODE_PROTOCOL instance.
@param IpAddr Pointer to the IP address that is used to resolve a MAC address.
@param MacAddr If not NULL, a pointer to the MAC address that was resolved with the
ARP protocol.
@retval EFI_SUCCESS The IP or MAC address was resolved.
@retval EFI_NOT_STARTED The PXE Base Code Protocol is in the stopped state.
@retval EFI_INVALID_PARAMETER One or more parameters are invalid.
@retval EFI_DEVICE_ERROR The network device encountered an error during this operation.
@retval EFI_ABORTED The callback function aborted the ARP Protocol.
@retval EFI_TIMEOUT The ARP Protocol encountered a timeout condition.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_PXE_BASE_CODE_ARP)(
IN EFI_PXE_BASE_CODE_PROTOCOL *This,
IN EFI_IP_ADDRESS *IpAddr,
IN EFI_MAC_ADDRESS *MacAddr OPTIONAL
);
/**
Updates the parameters that affect the operation of the PXE Base Code Protocol.
@param This Pointer to the EFI_PXE_BASE_CODE_PROTOCOL instance.
@param NewAutoArp If not NULL, a pointer to a value that specifies whether to replace the
current value of AutoARP.
@param NewSendGUID If not NULL, a pointer to a value that specifies whether to replace the
current value of SendGUID.
@param NewTTL If not NULL, a pointer to be used in place of the current value of TTL,
the "time to live" field of the IP header.
@param NewToS If not NULL, a pointer to be used in place of the current value of ToS,
the "type of service" field of the IP header.
@param NewMakeCallback If not NULL, a pointer to a value that specifies whether to replace the
current value of the MakeCallback field of the Mode structure.
@retval EFI_SUCCESS The new parameters values were updated.
@retval EFI_NOT_STARTED The PXE Base Code Protocol is in the stopped state.
@retval EFI_INVALID_PARAMETER One or more parameters are invalid.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_PXE_BASE_CODE_SET_PARAMETERS)(
IN EFI_PXE_BASE_CODE_PROTOCOL *This,
IN BOOLEAN *NewAutoArp, OPTIONAL
IN BOOLEAN *NewSendGUID, OPTIONAL
IN UINT8 *NewTTL, OPTIONAL
IN UINT8 *NewToS, OPTIONAL
IN BOOLEAN *NewMakeCallback OPTIONAL
);
/**
Updates the station IP address and/or subnet mask values of a network device.
@param This Pointer to the EFI_PXE_BASE_CODE_PROTOCOL instance.
@param NewStationIp Pointer to the new IP address to be used by the network device.
@param NewSubnetMask Pointer to the new subnet mask to be used by the network device.
@retval EFI_SUCCESS The new station IP address and/or subnet mask were updated.
@retval EFI_NOT_STARTED The PXE Base Code Protocol is in the stopped state.
@retval EFI_INVALID_PARAMETER One or more parameters are invalid.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_PXE_BASE_CODE_SET_STATION_IP)(
IN EFI_PXE_BASE_CODE_PROTOCOL *This,
IN EFI_IP_ADDRESS *NewStationIp, OPTIONAL
IN EFI_IP_ADDRESS *NewSubnetMask OPTIONAL
);
/**
Updates the contents of the cached DHCP and Discover packets.
@param This Pointer to the EFI_PXE_BASE_CODE_PROTOCOL instance.
@param NewDhcpDiscoverValid Pointer to a value that will replace the current
DhcpDiscoverValid field.
@param NewDhcpAckReceived Pointer to a value that will replace the current
DhcpAckReceived field.
@param NewProxyOfferReceived Pointer to a value that will replace the current
ProxyOfferReceived field.
@param NewPxeDiscoverValid Pointer to a value that will replace the current
ProxyOfferReceived field.
@param NewPxeReplyReceived Pointer to a value that will replace the current
PxeReplyReceived field.
@param NewPxeBisReplyReceived Pointer to a value that will replace the current
PxeBisReplyReceived field.
@param NewDhcpDiscover Pointer to the new cached DHCP Discover packet contents.
@param NewDhcpAck Pointer to the new cached DHCP Ack packet contents.
@param NewProxyOffer Pointer to the new cached Proxy Offer packet contents.
@param NewPxeDiscover Pointer to the new cached PXE Discover packet contents.
@param NewPxeReply Pointer to the new cached PXE Reply packet contents.
@param NewPxeBisReply Pointer to the new cached PXE BIS Reply packet contents.
@retval EFI_SUCCESS The cached packet contents were updated.
@retval EFI_NOT_STARTED The PXE Base Code Protocol is in the stopped state.
@retval EFI_INVALID_PARAMETER This is NULL or not point to a valid EFI_PXE_BASE_CODE_PROTOCOL structure.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_PXE_BASE_CODE_SET_PACKETS)(
IN EFI_PXE_BASE_CODE_PROTOCOL *This,
BOOLEAN *NewDhcpDiscoverValid, OPTIONAL
BOOLEAN *NewDhcpAckReceived, OPTIONAL
BOOLEAN *NewProxyOfferReceived, OPTIONAL
BOOLEAN *NewPxeDiscoverValid, OPTIONAL
BOOLEAN *NewPxeReplyReceived, OPTIONAL
BOOLEAN *NewPxeBisReplyReceived, OPTIONAL
IN EFI_PXE_BASE_CODE_PACKET *NewDhcpDiscover, OPTIONAL
IN EFI_PXE_BASE_CODE_PACKET *NewDhcpAck, OPTIONAL
IN EFI_PXE_BASE_CODE_PACKET *NewProxyOffer, OPTIONAL
IN EFI_PXE_BASE_CODE_PACKET *NewPxeDiscover, OPTIONAL
IN EFI_PXE_BASE_CODE_PACKET *NewPxeReply, OPTIONAL
IN EFI_PXE_BASE_CODE_PACKET *NewPxeBisReply OPTIONAL
);
//
// PXE Base Code Protocol structure
//
#define EFI_PXE_BASE_CODE_PROTOCOL_REVISION 0x00010000
//
// Revision defined in EFI1.1
//
#define EFI_PXE_BASE_CODE_INTERFACE_REVISION EFI_PXE_BASE_CODE_PROTOCOL_REVISION
/**
@par Protocol Description:
The EFI_PXE_BASE_CODE_PROTOCOL is used to control PXE-compatible devices.
An EFI_PXE_BASE_CODE_PROTOCOL will be layered on top of an
EFI_MANAGED_NETWORK_PROTOCOL protocol in order to perform packet level transactions.
The EFI_PXE_BASE_CODE_PROTOCOL handle also supports the
EFI_LOAD_FILE_PROTOCOL protocol. This provides a clean way to obtain control from the
boot manager if the boot path is from the remote device.
@param Revision
The revision of the EFI_PXE_BASE_CODE_PROTOCOL. All future revisions must
be backwards compatible. If a future version is not backwards compatible
it is not the same GUID.
@param Start
Starts the PXE Base Code Protocol. Mode structure information is not valid and
no other Base Code Protocol functions will operate until the Base Code is started.
@param Stop
Stops the PXE Base Code Protocol. Mode structure information is unchanged by this function.
No Base Code Protocol functions will operate until the Base Code is restarted.
@param Dhcp
Attempts to complete a DHCPv4 D.O.R.A. (discover / offer / request / acknowledge)
or DHCPv6 S.A.R.R (solicit / advertise / request / reply) sequence.
@param Discover
Attempts to complete the PXE Boot Server and/or boot image discovery sequence.
@param Mtftp
Performs TFTP and MTFTP services.
@param UdpWrite
Writes a UDP packet to the network interface.
@param UdpRead
Reads a UDP packet from the network interface.
@param SetIpFilter
Updates the IP receive filters of the network device.
@param Arp
Uses the ARP protocol to resolve a MAC address.
@param SetParameters
Updates the parameters that affect the operation of the PXE Base Code Protocol.
@param SetStationIp
Updates the station IP address and subnet mask values.
@param SetPackets
Updates the contents of the cached DHCP and Discover packets.
@param Mode
Pointer to the EFI_PXE_BASE_CODE_MODE data for this device.
**/
struct _EFI_PXE_BASE_CODE_PROTOCOL {
UINT64 Revision;
EFI_PXE_BASE_CODE_START Start;
EFI_PXE_BASE_CODE_STOP Stop;
EFI_PXE_BASE_CODE_DHCP Dhcp;
EFI_PXE_BASE_CODE_DISCOVER Discover;
EFI_PXE_BASE_CODE_MTFTP Mtftp;
EFI_PXE_BASE_CODE_UDP_WRITE UdpWrite;
EFI_PXE_BASE_CODE_UDP_READ UdpRead;
EFI_PXE_BASE_CODE_SET_IP_FILTER SetIpFilter;
EFI_PXE_BASE_CODE_ARP Arp;
EFI_PXE_BASE_CODE_SET_PARAMETERS SetParameters;
EFI_PXE_BASE_CODE_SET_STATION_IP SetStationIp;
EFI_PXE_BASE_CODE_SET_PACKETS SetPackets;
EFI_PXE_BASE_CODE_MODE *Mode;
};
extern EFI_GUID gEfiPxeBaseCodeProtocolGuid;
#endif