mirror of https://github.com/acidanthera/audk.git
297 lines
9.1 KiB
Plaintext
297 lines
9.1 KiB
Plaintext
# FLASH layout file for Beagle board.
|
|
#
|
|
# Copyright (c) 2009, Apple Inc. All rights reserved.
|
|
#
|
|
# All rights reserved. This program and the accompanying materials
|
|
# are licensed and made available under the terms and conditions of the BSD License
|
|
# which accompanies this distribution. The full text of the license may be found at
|
|
# http://opensource.org/licenses/bsd-license.php
|
|
#
|
|
# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
|
|
# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
|
|
#
|
|
|
|
################################################################################
|
|
#
|
|
# FD Section
|
|
# The [FD] Section is made up of the definition statements and a
|
|
# description of what goes into the Flash Device Image. Each FD section
|
|
# defines one flash "device" image. A flash device image may be one of
|
|
# the following: Removable media bootable image (like a boot floppy
|
|
# image,) an Option ROM image (that would be "flashed" into an add-in
|
|
# card,) a System "Flash" image (that would be burned into a system's
|
|
# flash) or an Update ("Capsule") image that will be used to update and
|
|
# existing system flash.
|
|
#
|
|
################################################################################
|
|
|
|
|
|
[FD.BeagleBoard_EFI]
|
|
####BaseAddress = 0x80208000|gEmbeddedTokenSpaceGuid.PcdEmbeddedFdBaseAddress #The base address of the FLASH Device.
|
|
BaseAddress = 0x80008000|gEmbeddedTokenSpaceGuid.PcdEmbeddedFdBaseAddress #The base address of the FLASH Device.
|
|
Size = 0x00080000|gEmbeddedTokenSpaceGuid.PcdEmbeddedFdSize #The size in bytes of the FLASH Device
|
|
ErasePolarity = 1
|
|
BlockSize = 0x40
|
|
NumBlocks = 0x2000
|
|
|
|
################################################################################
|
|
#
|
|
# Following are lists of FD Region layout which correspond to the locations of different
|
|
# images within the flash device.
|
|
#
|
|
# Regions must be defined in ascending order and may not overlap.
|
|
#
|
|
# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
|
|
# the pipe "|" character, followed by the size of the region, also in hex with the leading
|
|
# "0x" characters. Like:
|
|
# Offset|Size
|
|
# PcdOffsetCName|PcdSizeCName
|
|
# RegionType <FV, DATA, or FILE>
|
|
#
|
|
################################################################################
|
|
|
|
# 512 bytes of configuration header & 8 bytes of image header
|
|
0x00000000|0x00000208
|
|
|
|
0x00000208|0x0007FDF8
|
|
gEmbeddedTokenSpaceGuid.PcdFlashFvMainBase|gEmbeddedTokenSpaceGuid.PcdFlashFvMainSize
|
|
FV = FVMAIN_COMPACT
|
|
|
|
################################################################################
|
|
#
|
|
# FV Section
|
|
#
|
|
# [FV] section is used to define what components or modules are placed within a flash
|
|
# device file. This section also defines order the components and modules are positioned
|
|
# within the image. The [FV] section consists of define statements, set statements and
|
|
# module statements.
|
|
#
|
|
################################################################################
|
|
|
|
[FV.FvMain]
|
|
BlockSize = 0x40
|
|
NumBlocks = 0x9000
|
|
FvAlignment = 8 #FV alignment and FV attributes setting.
|
|
ERASE_POLARITY = 1
|
|
MEMORY_MAPPED = TRUE
|
|
STICKY_WRITE = TRUE
|
|
LOCK_CAP = TRUE
|
|
LOCK_STATUS = TRUE
|
|
WRITE_DISABLED_CAP = TRUE
|
|
WRITE_ENABLED_CAP = TRUE
|
|
WRITE_STATUS = TRUE
|
|
WRITE_LOCK_CAP = TRUE
|
|
WRITE_LOCK_STATUS = TRUE
|
|
READ_DISABLED_CAP = TRUE
|
|
READ_ENABLED_CAP = TRUE
|
|
READ_STATUS = TRUE
|
|
READ_LOCK_CAP = TRUE
|
|
READ_LOCK_STATUS = TRUE
|
|
|
|
#
|
|
# PI DXE Drivers producing Architectural Protocols (EFI Services)
|
|
#
|
|
INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
|
|
|
|
INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
|
|
INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
|
|
INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
|
|
INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
|
|
INF MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe.inf
|
|
INF EmbeddedPkg/EmbeddedMonotonicCounter/EmbeddedMonotonicCounter.inf
|
|
|
|
INF EmbeddedPkg/SimpleTextInOutSerial/SimpleTextInOutSerial.inf
|
|
|
|
INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
|
|
INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
|
|
INF EmbeddedPkg/TemplateMetronomeDxe/TemplateMetronomeDxe.inf
|
|
|
|
#
|
|
# Semi-hosting filesystem
|
|
#
|
|
INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf
|
|
|
|
#
|
|
# Nand Flash
|
|
#
|
|
INF BeagleBoardPkg/Flash/Flash.inf
|
|
|
|
#
|
|
# MMC/SD
|
|
#
|
|
INF BeagleBoardPkg/MMCHSDxe/MMCHS.inf
|
|
|
|
#
|
|
# I2C
|
|
#
|
|
INF BeagleBoardPkg/SmbusDxe/Smbus.inf
|
|
|
|
#
|
|
# SoC Drivers
|
|
#
|
|
INF BeagleBoardPkg/Gpio/Gpio.inf
|
|
INF BeagleBoardPkg/InterruptDxe/InterruptDxe.inf
|
|
INF BeagleBoardPkg/TimerDxe/TimerDxe.inf
|
|
|
|
#
|
|
# Power IC
|
|
#
|
|
INF BeagleBoardPkg/TPS65950Dxe/TPS65950.inf
|
|
|
|
#
|
|
# FAT filesystem + GPT/MBR partitioning
|
|
#
|
|
INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
|
|
INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
|
|
INF FatPkg/EnhancedFatDxe/Fat.inf
|
|
INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
|
|
|
|
#
|
|
# USB Support
|
|
#
|
|
|
|
INF BeagleBoardPkg/PciEmulation/PciEmulation.inf
|
|
|
|
#NOTE: Open source EHCI stack doesn't work on Beagleboard.
|
|
#NOTE: UsbBus and UsbMassStorage don't work using iPhond SDK tool chain.
|
|
INF MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe.inf
|
|
INF MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf
|
|
INF MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxe.inf
|
|
|
|
#
|
|
# UEFI application (Shell Embedded Boot Loader)
|
|
#
|
|
INF EmbeddedPkg/Ebl/Ebl.inf
|
|
|
|
|
|
#
|
|
# Bds
|
|
#
|
|
INF BeagleBoardPkg/Bds/Bds.inf
|
|
|
|
#
|
|
# Gdb Stub
|
|
#
|
|
#INF ArmPkg/Drivers/DebugSupportDxe/DebugSupportDxe.inf
|
|
|
|
|
|
[FV.FVMAIN_COMPACT]
|
|
FvAlignment = 8
|
|
ERASE_POLARITY = 1
|
|
MEMORY_MAPPED = TRUE
|
|
STICKY_WRITE = TRUE
|
|
LOCK_CAP = TRUE
|
|
LOCK_STATUS = TRUE
|
|
WRITE_DISABLED_CAP = TRUE
|
|
WRITE_ENABLED_CAP = TRUE
|
|
WRITE_STATUS = TRUE
|
|
WRITE_LOCK_CAP = TRUE
|
|
WRITE_LOCK_STATUS = TRUE
|
|
READ_DISABLED_CAP = TRUE
|
|
READ_ENABLED_CAP = TRUE
|
|
READ_STATUS = TRUE
|
|
READ_LOCK_CAP = TRUE
|
|
READ_LOCK_STATUS = TRUE
|
|
|
|
INF BeagleBoardPkg/Sec/Sec.inf
|
|
INF MdeModulePkg/Core/Dxe/DxeMain.inf
|
|
|
|
FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
|
|
SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
|
|
SECTION FV_IMAGE = FVMAIN
|
|
}
|
|
}
|
|
|
|
|
|
################################################################################
|
|
#
|
|
# Rules are use with the [FV] section's module INF type to define
|
|
# how an FFS file is created for a given INF file. The following Rule are the default
|
|
# rules for the different module type. User can add the customized rules to define the
|
|
# content of the FFS file.
|
|
#
|
|
################################################################################
|
|
|
|
|
|
############################################################################
|
|
# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section #
|
|
############################################################################
|
|
#
|
|
#[Rule.Common.DXE_DRIVER]
|
|
# FILE DRIVER = $(NAMED_GUID) {
|
|
# DXE_DEPEX DXE_DEPEX Optional |.depex
|
|
# COMPRESS PI_STD {
|
|
# GUIDED {
|
|
# PE32 PE32 |.efi
|
|
# UI STRING="$(MODULE_NAME)" Optional
|
|
# VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
|
|
# }
|
|
# }
|
|
# }
|
|
#
|
|
############################################################################
|
|
|
|
[Rule.Common.SEC]
|
|
FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
|
|
TE TE Align = 8 |.efi
|
|
}
|
|
|
|
[Rule.Common.PEI_CORE]
|
|
FILE PEI_CORE = $(NAMED_GUID) {
|
|
TE TE |.efi
|
|
UI STRING ="$(MODULE_NAME)" Optional
|
|
}
|
|
|
|
[Rule.Common.PEIM]
|
|
FILE PEIM = $(NAMED_GUID) {
|
|
PEI_DEPEX PEI_DEPEX Optional |.depex
|
|
PE32 PE32 |.efi
|
|
UI STRING="$(MODULE_NAME)" Optional
|
|
}
|
|
|
|
[Rule.Common.PEIM.TIANOCOMPRESSED]
|
|
FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
|
|
PEI_DEPEX PEI_DEPEX Optional |.depex
|
|
GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
|
|
PE32 PE32 |.efi
|
|
UI STRING="$(MODULE_NAME)" Optional
|
|
}
|
|
}
|
|
|
|
[Rule.Common.DXE_CORE]
|
|
FILE DXE_CORE = $(NAMED_GUID) {
|
|
GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
|
|
PE32 PE32 |.efi
|
|
UI STRING="$(MODULE_NAME)" Optional
|
|
}
|
|
}
|
|
|
|
|
|
[Rule.Common.UEFI_DRIVER]
|
|
FILE DRIVER = $(NAMED_GUID) {
|
|
DXE_DEPEX DXE_DEPEX Optional |.depex
|
|
PE32 PE32 |.efi
|
|
UI STRING="$(MODULE_NAME)" Optional
|
|
}
|
|
|
|
[Rule.Common.DXE_DRIVER]
|
|
FILE DRIVER = $(NAMED_GUID) {
|
|
DXE_DEPEX DXE_DEPEX Optional |.depex
|
|
PE32 PE32 |.efi
|
|
UI STRING="$(MODULE_NAME)" Optional
|
|
}
|
|
|
|
[Rule.Common.DXE_RUNTIME_DRIVER]
|
|
FILE DRIVER = $(NAMED_GUID) {
|
|
DXE_DEPEX DXE_DEPEX Optional |.depex
|
|
PE32 PE32 |.efi
|
|
UI STRING="$(MODULE_NAME)" Optional
|
|
}
|
|
|
|
|
|
[Rule.Common.UEFI_APPLICATION]
|
|
FILE APPLICATION = $(NAMED_GUID) {
|
|
UI STRING ="$(MODULE_NAME)" Optional
|
|
PE32 PE32 |.efi
|
|
}
|