audk/ArmPkg/Drivers/CpuDxe/CpuDxe.c

277 lines
8.5 KiB
C

/** @file
Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>
Copyright (c) 2011, ARM Limited. All rights reserved.
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include "CpuDxe.h"
#include <Guid/IdleLoopEvent.h>
/**
This function flushes the range of addresses from Start to Start+Length
from the processor's data cache. If Start is not aligned to a cache line
boundary, then the bytes before Start to the preceding cache line boundary
are also flushed. If Start+Length is not aligned to a cache line boundary,
then the bytes past Start+Length to the end of the next cache line boundary
are also flushed. The FlushType of EfiCpuFlushTypeWriteBackInvalidate must be
supported. If the data cache is fully coherent with all DMA operations, then
this function can just return EFI_SUCCESS. If the processor does not support
flushing a range of the data cache, then the entire data cache can be flushed.
@param This The EFI_CPU_ARCH_PROTOCOL instance.
@param Start The beginning physical address to flush from the processor's data
cache.
@param Length The number of bytes to flush from the processor's data cache. This
function may flush more bytes than Length specifies depending upon
the granularity of the flush operation that the processor supports.
@param FlushType Specifies the type of flush operation to perform.
@retval EFI_SUCCESS The address range from Start to Start+Length was flushed from
the processor's data cache.
@retval EFI_UNSUPPORTEDT The processor does not support the cache flush type specified
by FlushType.
@retval EFI_DEVICE_ERROR The address range from Start to Start+Length could not be flushed
from the processor's data cache.
**/
EFI_STATUS
EFIAPI
CpuFlushCpuDataCache (
IN EFI_CPU_ARCH_PROTOCOL *This,
IN EFI_PHYSICAL_ADDRESS Start,
IN UINT64 Length,
IN EFI_CPU_FLUSH_TYPE FlushType
)
{
switch (FlushType) {
case EfiCpuFlushTypeWriteBack:
WriteBackDataCacheRange ((VOID *)(UINTN)Start, (UINTN)Length);
break;
case EfiCpuFlushTypeInvalidate:
InvalidateDataCacheRange ((VOID *)(UINTN)Start, (UINTN)Length);
break;
case EfiCpuFlushTypeWriteBackInvalidate:
WriteBackInvalidateDataCacheRange ((VOID *)(UINTN)Start, (UINTN)Length);
break;
default:
return EFI_INVALID_PARAMETER;
}
return EFI_SUCCESS;
}
/**
This function enables interrupt processing by the processor.
@param This The EFI_CPU_ARCH_PROTOCOL instance.
@retval EFI_SUCCESS Interrupts are enabled on the processor.
@retval EFI_DEVICE_ERROR Interrupts could not be enabled on the processor.
**/
EFI_STATUS
EFIAPI
CpuEnableInterrupt (
IN EFI_CPU_ARCH_PROTOCOL *This
)
{
ArmEnableInterrupts ();
return EFI_SUCCESS;
}
/**
This function disables interrupt processing by the processor.
@param This The EFI_CPU_ARCH_PROTOCOL instance.
@retval EFI_SUCCESS Interrupts are disabled on the processor.
@retval EFI_DEVICE_ERROR Interrupts could not be disabled on the processor.
**/
EFI_STATUS
EFIAPI
CpuDisableInterrupt (
IN EFI_CPU_ARCH_PROTOCOL *This
)
{
ArmDisableInterrupts ();
return EFI_SUCCESS;
}
/**
This function retrieves the processor's current interrupt state a returns it in
State. If interrupts are currently enabled, then TRUE is returned. If interrupts
are currently disabled, then FALSE is returned.
@param This The EFI_CPU_ARCH_PROTOCOL instance.
@param State A pointer to the processor's current interrupt state. Set to TRUE if
interrupts are enabled and FALSE if interrupts are disabled.
@retval EFI_SUCCESS The processor's current interrupt state was returned in State.
@retval EFI_INVALID_PARAMETER State is NULL.
**/
EFI_STATUS
EFIAPI
CpuGetInterruptState (
IN EFI_CPU_ARCH_PROTOCOL *This,
OUT BOOLEAN *State
)
{
if (State == NULL) {
return EFI_INVALID_PARAMETER;
}
*State = ArmGetInterruptState();
return EFI_SUCCESS;
}
/**
This function generates an INIT on the processor. If this function succeeds, then the
processor will be reset, and control will not be returned to the caller. If InitType is
not supported by this processor, or the processor cannot programmatically generate an
INIT without help from external hardware, then EFI_UNSUPPORTED is returned. If an error
occurs attempting to generate an INIT, then EFI_DEVICE_ERROR is returned.
@param This The EFI_CPU_ARCH_PROTOCOL instance.
@param InitType The type of processor INIT to perform.
@retval EFI_SUCCESS The processor INIT was performed. This return code should never be seen.
@retval EFI_UNSUPPORTED The processor INIT operation specified by InitType is not supported
by this processor.
@retval EFI_DEVICE_ERROR The processor INIT failed.
**/
EFI_STATUS
EFIAPI
CpuInit (
IN EFI_CPU_ARCH_PROTOCOL *This,
IN EFI_CPU_INIT_TYPE InitType
)
{
return EFI_UNSUPPORTED;
}
EFI_STATUS
EFIAPI
CpuRegisterInterruptHandler (
IN EFI_CPU_ARCH_PROTOCOL *This,
IN EFI_EXCEPTION_TYPE InterruptType,
IN EFI_CPU_INTERRUPT_HANDLER InterruptHandler
)
{
return RegisterInterruptHandler (InterruptType, InterruptHandler);
}
EFI_STATUS
EFIAPI
CpuGetTimerValue (
IN EFI_CPU_ARCH_PROTOCOL *This,
IN UINT32 TimerIndex,
OUT UINT64 *TimerValue,
OUT UINT64 *TimerPeriod OPTIONAL
)
{
return EFI_UNSUPPORTED;
}
/**
Callback function for idle events.
@param Event Event whose notification function is being invoked.
@param Context The pointer to the notification function's context,
which is implementation-dependent.
**/
VOID
EFIAPI
IdleLoopEventCallback (
IN EFI_EVENT Event,
IN VOID *Context
)
{
CpuSleep ();
}
//
// Globals used to initialize the protocol
//
EFI_HANDLE mCpuHandle = NULL;
EFI_CPU_ARCH_PROTOCOL mCpu = {
CpuFlushCpuDataCache,
CpuEnableInterrupt,
CpuDisableInterrupt,
CpuGetInterruptState,
CpuInit,
CpuRegisterInterruptHandler,
CpuGetTimerValue,
CpuSetMemoryAttributes,
0, // NumberOfTimers
4, // DmaBufferAlignment
};
EFI_STATUS
CpuDxeInitialize (
IN EFI_HANDLE ImageHandle,
IN EFI_SYSTEM_TABLE *SystemTable
)
{
EFI_STATUS Status;
EFI_EVENT IdleLoopEvent;
InitializeExceptions (&mCpu);
Status = gBS->InstallMultipleProtocolInterfaces (
&mCpuHandle,
&gEfiCpuArchProtocolGuid, &mCpu,
&gVirtualUncachedPagesProtocolGuid, &gVirtualUncachedPages,
NULL
);
//
// Make sure GCD and MMU settings match. This API calls gDS->SetMemorySpaceAttributes ()
// and that calls EFI_CPU_ARCH_PROTOCOL.SetMemoryAttributes, so this code needs to go
// after the protocol is installed
//
SyncCacheConfig (&mCpu);
// If the platform is a MPCore system then install the Configuration Table describing the
// secondary core states
if (ArmIsMpCore()) {
PublishArmProcessorTable();
}
//
// Setup a callback for idle events
//
Status = gBS->CreateEventEx (
EVT_NOTIFY_SIGNAL,
TPL_NOTIFY,
IdleLoopEventCallback,
NULL,
&gIdleLoopEventGuid,
&IdleLoopEvent
);
ASSERT_EFI_ERROR (Status);
return Status;
}