audk/QuarkPlatformPkg/Include/Library/PlatformHelperLib.h

/** @file
PlatformHelperLib function prototype definitions.

Copyright (c) 2013 - 2016 Intel Corporation.

SPDX-License-Identifier: BSD-2-Clause-Patent

**/

#ifndef __PLATFORM_HELPER_LIB_H__
#define __PLATFORM_HELPER_LIB_H__

#include "Platform.h"

//
// Function prototypes for routines exported by this library.
//

/**
  Find pointer to RAW data in Firmware volume file.

  @param   FvNameGuid       Firmware volume to search. If == NULL search all.
  @param   FileNameGuid     Firmware volume file to search for.
  @param   SectionData      Pointer to RAW data section of found file.
  @param   SectionDataSize  Pointer to UNITN to get size of RAW data.

  @retval  EFI_SUCCESS            Raw Data found.
  @retval  EFI_INVALID_PARAMETER  FileNameGuid == NULL.
  @retval  EFI_NOT_FOUND          Firmware volume file not found.
  @retval  EFI_UNSUPPORTED        Unsupported in current enviroment (PEI or DXE).

**/
EFI_STATUS
EFIAPI
PlatformFindFvFileRawDataSection (
  IN CONST EFI_GUID                 *FvNameGuid OPTIONAL,
  IN CONST EFI_GUID                 *FileNameGuid,
  OUT VOID                          **SectionData,
  OUT UINTN                         *SectionDataSize
  );

/**
  Find free spi protect register and write to it to protect a flash region.

  @param   DirectValue      Value to directly write to register.
                            if DirectValue == 0 the use Base & Length below.
  @param   BaseAddress      Base address of region in Flash Memory Map.
  @param   Length           Length of region to protect.

  @retval  EFI_SUCCESS      Free spi protect register found & written.
  @retval  EFI_NOT_FOUND    Free Spi protect register not found.
  @retval  EFI_DEVICE_ERROR Unable to write to spi protect register.

**/
EFI_STATUS
EFIAPI
PlatformWriteFirstFreeSpiProtect (
  IN CONST UINT32                         DirectValue,
  IN CONST UINT32                         BaseAddress,
  IN CONST UINT32                         Length
  );

/**
  Lock legacy SPI static configuration information.

  Function will assert if unable to lock config.

**/
VOID
EFIAPI
PlatformFlashLockConfig (
  VOID
  );

/**
  Lock regions and config of SPI flash given the policy for this platform.

  Function will assert if unable to lock regions or config.

  @param   PreBootPolicy    If TRUE do Pre Boot Flash Lock Policy.

**/
VOID
EFIAPI
PlatformFlashLockPolicy (
  IN CONST BOOLEAN                        PreBootPolicy
  );

/** Check if System booted with recovery Boot Stage1 image.

  @retval  TRUE    If system booted with recovery Boot Stage1 image.
  @retval  FALSE   If system booted with normal stage1 image.

**/
BOOLEAN
EFIAPI
PlatformIsBootWithRecoveryStage1 (
  VOID
  );

/**
  Clear SPI Protect registers.

  @retval EFI_SUCESS         SPI protect registers cleared.
  @retval EFI_ACCESS_DENIED  Unable to clear SPI protect registers.
**/

EFI_STATUS
EFIAPI
PlatformClearSpiProtect (
  VOID
  );

/**
  Determine if an SPI address range is protected.

  @param  SpiBaseAddress  Base of SPI range.
  @param  Length          Length of SPI range.

  @retval TRUE       Range is protected.
  @retval FALSE      Range is not protected.
**/
BOOLEAN
EFIAPI
PlatformIsSpiRangeProtected (
  IN CONST UINT32                         SpiBaseAddress,
  IN CONST UINT32                         Length
  );

/**
  Set Legacy GPIO Level

  @param  LevelRegOffset      GPIO level register Offset from GPIO Base Address.
  @param  GpioNum             GPIO bit to change.
  @param  HighLevel           If TRUE set GPIO High else Set GPIO low.

**/
VOID
EFIAPI
PlatformLegacyGpioSetLevel (
  IN CONST UINT32       LevelRegOffset,
  IN CONST UINT32       GpioNum,
  IN CONST BOOLEAN      HighLevel
  );

/**
  Get Legacy GPIO Level

  @param  LevelRegOffset      GPIO level register Offset from GPIO Base Address.
  @param  GpioNum             GPIO bit to check.

  @retval TRUE       If bit is SET.
  @retval FALSE      If bit is CLEAR.

**/
BOOLEAN
EFIAPI
PlatformLegacyGpioGetLevel (
  IN CONST UINT32       LevelRegOffset,
  IN CONST UINT32       GpioNum
  );

/**
  Set the direction of Pcal9555 IO Expander GPIO pin.

  @param  Pcal9555SlaveAddr  I2c Slave address of Pcal9555 Io Expander.
  @param  GpioNum            Gpio direction to configure - values 0-7 for Port0
                             and 8-15 for Port1.
  @param  CfgAsInput         If TRUE set pin direction as input else set as output.

**/
VOID
EFIAPI
PlatformPcal9555GpioSetDir (
  IN CONST UINT32                         Pcal9555SlaveAddr,
  IN CONST UINT32                         GpioNum,
  IN CONST BOOLEAN                        CfgAsInput
  );

/**
  Set the level of Pcal9555 IO Expander GPIO high or low.

  @param  Pcal9555SlaveAddr  I2c Slave address of Pcal9555 Io Expander.
  @param  GpioNum            Gpio to change values 0-7 for Port0 and 8-15
                             for Port1.
  @param  HighLevel          If TRUE set pin high else set pin low.

**/
VOID
EFIAPI
PlatformPcal9555GpioSetLevel (
  IN CONST UINT32                         Pcal9555SlaveAddr,
  IN CONST UINT32                         GpioNum,
  IN CONST BOOLEAN                        HighLevel
  );

/**

  Enable pull-up/pull-down resistors of Pcal9555 GPIOs.

  @param  Pcal9555SlaveAddr  I2c Slave address of Pcal9555 Io Expander.
  @param  GpioNum            Gpio to change values 0-7 for Port0 and 8-15
                             for Port1.

**/
VOID
EFIAPI
PlatformPcal9555GpioEnablePull (
  IN CONST UINT32                         Pcal9555SlaveAddr,
  IN CONST UINT32                         GpioNum
  );

/**

  Disable pull-up/pull-down resistors of Pcal9555 GPIOs.

  @param  Pcal9555SlaveAddr  I2c Slave address of Pcal9555 Io Expander.
  @param  GpioNum            Gpio to change values 0-7 for Port0 and 8-15
                             for Port1.

**/
VOID
EFIAPI
PlatformPcal9555GpioDisablePull (
  IN CONST UINT32                         Pcal9555SlaveAddr,
  IN CONST UINT32                         GpioNum
  );

BOOLEAN
EFIAPI
PlatformPcal9555GpioGetState (
  IN CONST UINT32                         Pcal9555SlaveAddr,
  IN CONST UINT32                         GpioNum
  );

/**
  Init platform LEDs into known state.

  @param   PlatformType     Executing platform type.

  @retval  EFI_SUCCESS      Operation success.

**/
EFI_STATUS
EFIAPI
PlatformLedInit (
  IN CONST EFI_PLATFORM_TYPE              Type
  );

/**
  Turn on or off platform flash update LED.

  @param   PlatformType     Executing platform type.
  @param   TurnOn           If TRUE turn on else turn off.

  @retval  EFI_SUCCESS      Operation success.

**/
EFI_STATUS
EFIAPI
PlatformFlashUpdateLed (
  IN CONST EFI_PLATFORM_TYPE              Type,
  IN CONST BOOLEAN                        TurnOn
  );

#endif // #ifndef __PLATFORM_HELPER_LIB_H__