audk/ArmPlatformPkg/Library/ArmMaliDp/ArmMaliDp.c

/** @file

  ARM Mali DP 500/550/650 display controller driver

  Copyright (c) 2017-2018, Arm Limited. All rights reserved.<BR>

  This program and the accompanying materials
  are licensed and made available under the terms and conditions of the BSD License
  which accompanies this distribution.  The full text of the license may be found at
  http://opensource.org/licenses/bsd-license.php

  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

**/

#include <Library/DebugLib.h>
#include <Library/IoLib.h>
#include <Library/LcdHwLib.h>
#include <Library/LcdPlatformLib.h>
#include <Library/MemoryAllocationLib.h>

#include "ArmMaliDp.h"

// CORE_ID of the MALI DP
STATIC UINT32 mDpDeviceId;

/** Disable the graphics layer

  This is done by clearing the EN bit of the LG_CONTROL register.
**/
STATIC
VOID
LayerGraphicsDisable (VOID)
{
  MmioAnd32 (DP_BASE + DP_DE_LG_CONTROL, ~DP_DE_LG_ENABLE);
}

/** Enable the graphics layer

  This is done by setting the EN bit of the LG_CONTROL register.
**/
STATIC
VOID
LayerGraphicsEnable (VOID)
{
  MmioOr32 (DP_BASE + DP_DE_LG_CONTROL, DP_DE_LG_ENABLE);
}

/** Set the frame address of the graphics layer.

  @param[in]  FrameBaseAddress     Address of the data buffer to be used as
                                   a framebuffer.
**/
STATIC
VOID
LayerGraphicsSetFrame (
  IN CONST EFI_PHYSICAL_ADDRESS FrameBaseAddress
  )
{
  // Disable the graphics layer.
  LayerGraphicsDisable ();

  // Set up memory address of the data buffer for graphics layer.
  // write lower bits of the address.
  MmioWrite32 (
    DP_BASE + DP_DE_LG_PTR_LOW,
    DP_DE_LG_PTR_LOW_MASK & FrameBaseAddress
    );

  // Write higher bits of the address.
  MmioWrite32 (
    DP_BASE + DP_DE_LG_PTR_HIGH,
    (UINT32)(FrameBaseAddress >> DP_DE_LG_PTR_HIGH_SHIFT)
    );

  // Enable the graphics layer.
  LayerGraphicsEnable ();
}

/** Configures various graphics layer characteristics.

  @param[in] UefiGfxPixelFormat  This must be either
                                 PixelBlueGreenRedReserved8BitPerColor
                                 OR
                                 PixelRedGreenBlueReserved8BitPerColor
  @param[in] HRes                Horizontal resolution of the graphics layer.
  @param[in] VRes                Vertical resolution of the graphics layer.
**/
STATIC
VOID
LayerGraphicsConfig (
  IN CONST EFI_GRAPHICS_PIXEL_FORMAT UefiGfxPixelFormat,
  IN CONST UINT32 HRes,
  IN CONST UINT32 VRes
  )
{
  UINT32 PixelFormat;

  // Disable the graphics layer before configuring any settings.
  LayerGraphicsDisable ();

  // Setup graphics layer size.
  MmioWrite32 (DP_BASE + DP_DE_LG_IN_SIZE, FRAME_IN_SIZE (HRes, VRes));

  // Setup graphics layer composition size.
  MmioWrite32 (DP_BASE + DP_DE_LG_CMP_SIZE, FRAME_CMP_SIZE (HRes, VRes));

  // Setup memory stride (total visible pixels on a line * 4).
  MmioWrite32 (DP_BASE + DP_DE_LG_H_STRIDE, (HRes * sizeof (UINT32)));

  // Set the format.

  // In PixelBlueGreenRedReserved8BitPerColor format, byte 0 represents blue,
  // byte 1 represents green, byte 2 represents red, and byte 3 is reserved
  // which is equivalent to XRGB format of the DP500/DP550/DP650. Whereas
  // PixelRedGreenBlueReserved8BitPerColor is equivalent to XBGR of the
  // DP500/DP550/DP650.
  if (UefiGfxPixelFormat == PixelBlueGreenRedReserved8BitPerColor) {
    PixelFormat = (mDpDeviceId == MALIDP_500) ? DP_PIXEL_FORMAT_DP500_XRGB_8888
                     : DP_PIXEL_FORMAT_XRGB_8888;
  } else {
    PixelFormat = (mDpDeviceId == MALIDP_500) ? DP_PIXEL_FORMAT_DP500_XBGR_8888
                     : DP_PIXEL_FORMAT_XBGR_8888;
  }

  MmioWrite32 (DP_BASE + DP_DE_LG_FORMAT, PixelFormat);

  // Enable graphics layer.
  LayerGraphicsEnable ();
}

/** Configure timing information of the display.

  @param[in] Horizontal           Pointer to horizontal timing parameters.
                                  (Resolution, Sync, Back porch, Front porch)
  @param[in] Vertical             Pointer to vertical timing parameters.
                                  (Resolution, Sync, Back porch, Front porch)
**/
STATIC
VOID
SetDisplayEngineTiming (
  IN CONST SCAN_TIMINGS * CONST Horizontal,
  IN CONST SCAN_TIMINGS * CONST Vertical
  )
{
  UINTN RegHIntervals;
  UINTN RegVIntervals;
  UINTN RegSyncControl;
  UINTN RegHVActiveSize;

  if (mDpDeviceId == MALIDP_500) {
    // MALI DP500 timing registers.
    RegHIntervals = DP_BASE + DP_DE_DP500_H_INTERVALS;
    RegVIntervals = DP_BASE + DP_DE_DP500_V_INTERVALS;
    RegSyncControl = DP_BASE + DP_DE_DP500_SYNC_CONTROL;
    RegHVActiveSize = DP_BASE + DP_DE_DP500_HV_ACTIVESIZE;
  } else {
    // MALI DP550/DP650 timing registers.
    RegHIntervals = DP_BASE + DP_DE_H_INTERVALS;
    RegVIntervals = DP_BASE + DP_DE_V_INTERVALS;
    RegSyncControl = DP_BASE + DP_DE_SYNC_CONTROL;
    RegHVActiveSize = DP_BASE + DP_DE_HV_ACTIVESIZE;
  }

  // Horizontal back porch and front porch.
  MmioWrite32 (
    RegHIntervals,
    H_INTERVALS (Horizontal->FrontPorch, Horizontal->BackPorch)
    );

  // Vertical back porch and front porch.
  MmioWrite32 (
    RegVIntervals,
    V_INTERVALS (Vertical->FrontPorch, Vertical->BackPorch)
    );

  // Sync control, Horizontal and Vertical sync.
  MmioWrite32 (
    RegSyncControl,
    SYNC_WIDTH (Horizontal->Sync, Vertical->Sync)
    );

  // Set up Horizontal and Vertical area size.
  MmioWrite32 (
    RegHVActiveSize,
    HV_ACTIVE (Horizontal->Resolution, Vertical->Resolution)
    );
}

/** Return CORE_ID of the ARM Mali DP.

  @retval 0xFFF                  No Mali DP found.
  @retval 0x500                  Mali DP core id for DP500.
  @retval 0x550                  Mali DP core id for DP550.
  @retval 0x650                  Mali DP core id for DP650.
**/
STATIC
UINT32
ArmMaliDpGetCoreId (
  )
{
  UINT32 DpCoreId;

  // First check for DP500 as register offset for DP550/DP650 CORE_ID
  // is beyond 3K/4K register space of the DP500.
  DpCoreId = MmioRead32 (DP_BASE + DP_DE_DP500_CORE_ID);
  DpCoreId >>= DP_DE_DP500_CORE_ID_SHIFT;

  if (DpCoreId == MALIDP_500) {
    return DpCoreId;
  }

  // Check for DP550 or DP650.
  DpCoreId = MmioRead32 (DP_BASE + DP_DC_CORE_ID);
  DpCoreId >>= DP_DC_CORE_ID_SHIFT;

  if ((DpCoreId == MALIDP_550) || (DpCoreId == MALIDP_650)) {
    return DpCoreId;
  }

  return MALIDP_NOT_PRESENT;
}

/** Check for presence of MALI.

  This function returns success if the platform implements
  DP500/DP550/DP650 ARM Mali display processor.

  @retval EFI_SUCCESS           DP500/DP550/DP650 display processor found
                                on the platform.
  @retval EFI_NOT_FOUND         DP500/DP550/DP650 display processor not found
                                on the platform.
**/
EFI_STATUS
LcdIdentify (VOID)
{
  DEBUG ((DEBUG_WARN,
    "Probing ARM Mali DP500/DP550/DP650 at base address 0x%p\n",
    DP_BASE
    ));

  if (mDpDeviceId == 0) {
    mDpDeviceId = ArmMaliDpGetCoreId ();
  }

  if (mDpDeviceId == MALIDP_NOT_PRESENT) {
     DEBUG ((DEBUG_WARN, "ARM Mali DP not found...\n"));
     return EFI_NOT_FOUND;
  }

  DEBUG ((DEBUG_WARN, "Found ARM Mali DP %x\n", mDpDeviceId));
  return EFI_SUCCESS;
}

/** Initialize platform display.

  @param[in]  FrameBaseAddress       Address of the frame buffer.

  @retval EFI_SUCCESS                Display initialization successful.
  @retval !(EFI_SUCCESS)             Display initialization failure.
**/
EFI_STATUS
LcdInitialize (
  IN CONST EFI_PHYSICAL_ADDRESS FrameBaseAddress
  )
{
  DEBUG ((DEBUG_WARN, "Framebuffer base address = %p\n", FrameBaseAddress));

  if (mDpDeviceId == 0) {
    mDpDeviceId = ArmMaliDpGetCoreId ();
  }

  if (mDpDeviceId == MALIDP_NOT_PRESENT) {
    DEBUG ((DEBUG_ERROR, "ARM Mali DP initialization failed,"
      "no ARM Mali DP present\n"));
    return EFI_NOT_FOUND;
  }

  // We are using graphics layer of the Mali DP as a main framebuffer.
  LayerGraphicsSetFrame (FrameBaseAddress);

  return EFI_SUCCESS;
}

/** Set ARM Mali DP in cofiguration mode.

  The ARM Mali DP must be in the configuration mode for
  configuration of the H_INTERVALS, V_INTERVALS, SYNC_CONTROL
  and HV_ACTIVESIZE.
**/
STATIC
VOID
SetConfigurationMode (VOID)
{
  // Request configuration Mode.
  if (mDpDeviceId == MALIDP_500) {
    MmioOr32 (DP_BASE + DP_DE_DP500_CONTROL, DP_DE_DP500_CONTROL_CONFIG_REQ);
  } else {
    MmioOr32 (DP_BASE + DP_DC_CONTROL, DP_DC_CONTROL_CM_ACTIVE);
  }
}

/** Set ARM Mali DP in normal mode.

  Normal mode is the main operating mode of the display processor
  in which display layer data is fetched from framebuffer and
  displayed.
**/
STATIC
VOID
SetNormalMode (VOID)
{
  // Disable configuration Mode.
  if (mDpDeviceId == MALIDP_500) {
    MmioAnd32 (DP_BASE + DP_DE_DP500_CONTROL, ~DP_DE_DP500_CONTROL_CONFIG_REQ);
  } else {
    MmioAnd32 (DP_BASE + DP_DC_CONTROL, ~DP_DC_CONTROL_CM_ACTIVE);
  }
}

/** Set the global configuration valid flag.

  Any new configuration parameters written to the display engine are not
  activated until the global configuration valid flag is set in the
  CONFIG_VALID register.
**/
STATIC
VOID
SetConfigValid (VOID)
{
  if (mDpDeviceId == MALIDP_500) {
    MmioOr32 (DP_BASE + DP_DP500_CONFIG_VALID, DP_DC_CONFIG_VALID);
  } else {
    MmioOr32 (DP_BASE + DP_DC_CONFIG_VALID, DP_DC_CONFIG_VALID);
  }
}

/** Set requested mode of the display.

  @param[in]  ModeNumber             Display mode number.

  @retval EFI_SUCCESS                Display mode set successful.
  @retval EFI_DEVICE_ERROR           Display mode not found/supported.
**/
EFI_STATUS
LcdSetMode (
  IN CONST UINT32  ModeNumber
  )
{
  EFI_STATUS    Status;
  SCAN_TIMINGS  *Horizontal;
  SCAN_TIMINGS  *Vertical;

  EFI_GRAPHICS_OUTPUT_MODE_INFORMATION  ModeInfo;

  // Get the display mode timings and other relevant information.
  Status = LcdPlatformGetTimings (
             ModeNumber,
             &Horizontal,
             &Vertical
             );
  if (EFI_ERROR (Status)) {
    ASSERT_EFI_ERROR (Status);
    return Status;
  }

  ASSERT (Horizontal != NULL);
  ASSERT (Vertical != NULL);

  // Get the pixel format information.
  Status = LcdPlatformQueryMode (ModeNumber, &ModeInfo);
  if (EFI_ERROR (Status)) {
    ASSERT_EFI_ERROR (Status);
    return Status;
  }

  // Request configuration mode.
  SetConfigurationMode ();

  // Configure the graphics layer.
  LayerGraphicsConfig (
    ModeInfo.PixelFormat,
    Horizontal->Resolution,
    Vertical->Resolution
    );

  // Set the display engine timings.
  SetDisplayEngineTiming (Horizontal, Vertical);

  // After configuration, set Mali DP in normal mode.
  SetNormalMode ();

  // Any parameters written to the display engine are not activated until
  // CONFIG_VALID is set.
  SetConfigValid ();

  return EFI_SUCCESS;
}

/** This function de-initializes the display.

**/
VOID
LcdShutdown (VOID)
{
  // Disable graphics layer.
  LayerGraphicsDisable ();
}