audk/NetworkPkg/NetworkDefines.dsc.inc

154 lines
5.2 KiB
PHP

## @file
# Network DSC include file for [Defines] section of all Architectures.
#
# This file can be included to the [Defines] section of a platform DSC file by
# using "!include NetworkPkg/NetworkDefines.dsc.inc" to set default value of
# flags if they are not defined somewhere else, and also check the value to see
# if there is any conflict.
#
# These flags can be defined before the !include line, or changed on the command
# line to enable or disable related feature support.
# -D FLAG=VALUE
# The default value of these flags are:
# DEFINE NETWORK_ENABLE = TRUE
# DEFINE NETWORK_SNP_ENABLE = TRUE
# DEFINE NETWORK_IP4_ENABLE = TRUE
# DEFINE NETWORK_IP6_ENABLE = TRUE
# DEFINE NETWORK_TLS_ENABLE = TRUE
# DEFINE NETWORK_HTTP_ENABLE = FALSE
# DEFINE NETWORK_HTTP_BOOT_ENABLE = TRUE
# DEFINE NETWORK_ALLOW_HTTP_CONNECTIONS = FALSE
# DEFINE NETWORK_ISCSI_ENABLE = FALSE
# DEFINE NETWORK_ISCSI_MD5_ENABLE = TRUE
# DEFINE NETWORK_VLAN_ENABLE = TRUE
#
# Copyright (c) 2019, Intel Corporation. All rights reserved.<BR>
# (C) Copyright 2020 Hewlett Packard Enterprise Development LP<BR>
#
# SPDX-License-Identifier: BSD-2-Clause-Patent
#
##
!ifndef NETWORK_ENABLE
#
# This flag is to enable or disable the whole network stack.
#
DEFINE NETWORK_ENABLE = TRUE
!endif
!ifndef NETWORK_SNP_ENABLE
#
# This flag is to include the common SNP driver or not.
#
DEFINE NETWORK_SNP_ENABLE = TRUE
!endif
!ifndef NETWORK_VLAN_ENABLE
#
# This flag is to enable or disable VLAN feature.
#
DEFINE NETWORK_VLAN_ENABLE = TRUE
!endif
!ifndef NETWORK_IP4_ENABLE
#
# This flag is to enable or disable IPv4 network stack.
#
DEFINE NETWORK_IP4_ENABLE = TRUE
!endif
!ifndef NETWORK_IP6_ENABLE
#
# This flag is to enable or disable IPv6 network stack.
#
DEFINE NETWORK_IP6_ENABLE = TRUE
!endif
!ifndef NETWORK_TLS_ENABLE
#
# This flag is to enable or disable TLS feature.
#
# Note: This feature depends on the OpenSSL building. To enable this feature, please
# follow the instructions found in the file "OpenSSL-HOWTO.txt" located in
# CryptoPkg\Library\OpensslLib to enable the OpenSSL building first.
# The OpensslLib.inf library instance should be used since libssl is required.
#
DEFINE NETWORK_TLS_ENABLE = TRUE
!endif
!ifndef NETWORK_HTTP_ENABLE
#
# This flag is to enable or disable HTTP(S) feature.
# The default is set to FALSE to not affecting the existing
# platforms.
# NETWORK_HTTP_ENABLE set to FALSE is not affecting NETWORK_HTTP_BOOT_ENABLE
# when NETWORK_HTTP_BOOT_ENABLE is TRUE.
DEFINE NETWORK_HTTP_ENABLE = FALSE
!endif
!ifndef NETWORK_HTTP_BOOT_ENABLE
#
# This flag is to enable or disable HTTP(S) boot feature.
#
#
DEFINE NETWORK_HTTP_BOOT_ENABLE = TRUE
!endif
!ifndef NETWORK_ALLOW_HTTP_CONNECTIONS
#
# Indicates whether HTTP connections (i.e., unsecured) are permitted or not.
#
# Note: If NETWORK_ALLOW_HTTP_CONNECTIONS is TRUE, HTTP connections are allowed.
# Both the "https://" and "http://" URI schemes are permitted. Otherwise, HTTP
# connections are denied. Only the "https://" URI scheme is permitted.
#
DEFINE NETWORK_ALLOW_HTTP_CONNECTIONS = FALSE
!endif
!ifndef NETWORK_ISCSI_ENABLE
#
# This flag is to enable or disable iSCSI feature.
#
# Note: This feature depends on the OpenSSL building. To enable this feature, please
# follow the instructions found in the file "OpenSSL-HOWTO.txt" located in
# CryptoPkg\Library\OpensslLib to enable the OpenSSL building first.
# Both OpensslLib.inf and OpensslLibCrypto.inf library instance can be used
# since libssl is not required for iSCSI.
#
DEFINE NETWORK_ISCSI_ENABLE = FALSE
!endif
!ifndef NETWORK_ISCSI_MD5_ENABLE
#
# This flag enables the deprecated MD5 hash algorithm in iSCSI CHAP
# authentication.
#
# Note: The NETWORK_ISCSI_MD5_ENABLE flag only makes a difference if
# NETWORK_ISCSI_ENABLE is TRUE; otherwise, NETWORK_ISCSI_MD5_ENABLE is
# ignored.
#
# With NETWORK_ISCSI_MD5_ENABLE set to TRUE, MD5 is enabled as the
# least preferred CHAP hash algorithm. With NETWORK_ISCSI_MD5_ENABLE
# set to FALSE, MD5 is disabled statically, at build time.
#
# The default value is TRUE, because RFC 7143 mandates MD5, and because
# several vendors' iSCSI targets only support MD5, for CHAP.
#
DEFINE NETWORK_ISCSI_MD5_ENABLE = TRUE
!endif
!if $(NETWORK_ENABLE) == TRUE
#
# Check the flags to see if there is any conflict.
#
!if ($(NETWORK_IP4_ENABLE) == FALSE) AND ($(NETWORK_IP6_ENABLE) == FALSE)
!error "Must enable at least IP4 or IP6 stack if NETWORK_ENABLE is set to TRUE!"
!endif
!if ($(NETWORK_HTTP_BOOT_ENABLE) == TRUE) OR ($(NETWORK_HTTP_ENABLE) == TRUE)
!if ($(NETWORK_TLS_ENABLE) == FALSE) AND ($(NETWORK_ALLOW_HTTP_CONNECTIONS) == FALSE)
!error "Must enable TLS to support HTTPS, or allow unsecured HTTP connection, if NETWORK_HTTP_BOOT_ENABLE or NETWORK_HTTP_ENABLE is set to TRUE!"
!endif
!endif
!endif