..
Acpi
Separate memory allocation for FPDT S3 performance table and boot performance table, save S3 performance table pointer to LockBox in FirmwarePerformanceDxe. Then FirmwarePerformancePei can use the pointer in LockBox.
2013-05-16 07:35:30 +00:00
CapsulePei
1. Add debug init flag DEBUG_AGENT_INIT_THUNK_PEI_IA32TOX64 in Debug Agent Library.
2012-08-27 08:36:23 +00:00
CapsuleRuntimeDxe
Add capsule > 4GB support. When capsule data is put above 4GB, IA32 PEI transfers to long mode to get capsule data.
2011-09-02 11:34:35 +00:00
Console
Don't assume HiiDatabase has been present at the entrypoint and don't assume HiiDatabase and HiiFont are on the same handle according to the UEFI spec.
2013-04-02 03:23:54 +00:00
DebugPortDxe
MdeModulePkg/DebugPortDxe: Fixed the ordering of the EFI_DEBUGPORT_PROTOCOL entries
2012-03-15 15:27:18 +00:00
DebugSupportDxe
MdeModulePkg: eliminate all implicit library dependencies for all modules in MdeModulePkg on PcdLib
2012-11-01 06:59:25 +00:00
DevicePathDxe
Fix build failure by adding UINT16 type cast.
2013-04-12 07:16:42 +00:00
Disk
Add comment for modules which have external input.
2012-06-12 08:28:43 +00:00
DriverSampleDxe
Refine code to follow coding style.
2013-01-24 08:46:59 +00:00
EbcDxe
Add Missing invocations to VA_END() for VA_START().
2012-02-01 06:06:08 +00:00
FaultTolerantWriteDxe
1. Fix TOCTOU issue in VariableSmm, FtwSmm, FpdtSmm, SmmCorePerformance SMM handler. For VariableSmm, pre-allocate a mVariableBufferPayload buffer with mVariableBufferPayloadSize(match with mVariableBufferPayloadSize in VariableSmmRuntimeDxe) to hold communicate buffer payload to avoid TOCTOU issue.
2013-05-07 05:38:32 +00:00
HiiDatabaseDxe
Base on the type field to get the width of value field for option opcode.
2013-01-06 06:12:50 +00:00
HiiResourcesSampleDxe
Clean up the private GUID definition in module Level.
2011-09-18 12:21:01 +00:00
LegacyRegion2Dxe
Enhance inf and dec file to follow specs.
2011-03-14 08:43:59 +00:00
LockBox /SmmLockBox
1. Fix TOCTOU issue in VariableSmm, FtwSmm, FpdtSmm, SmmCorePerformance SMM handler. For VariableSmm, pre-allocate a mVariableBufferPayload buffer with mVariableBufferPayloadSize(match with mVariableBufferPayloadSize in VariableSmmRuntimeDxe) to hold communicate buffer payload to avoid TOCTOU issue.
2013-05-07 05:38:32 +00:00
MemoryTest
MdeModulePkg: Add GenericMemoryTestDxe driver
2011-07-01 00:40:26 +00:00
Metronome
Update the copyright notice format
2010-04-24 09:33:45 +00:00
MonotonicCounterRuntimeDxe
Clean up the private GUID definition in module Level.
2011-09-18 12:21:01 +00:00
Network
Add Copyright notices and comments for Red Hat contributor.
2013-05-14 06:25:39 +00:00
PCD
Adds ASSERT check in DxePcd driver when error status of read DynamicHii PCD is not EFI_NOT_FOUND to avoid the incorrect value is used.
2013-02-27 03:01:40 +00:00
PcatSingleSegmentPciCfg2Pei
Update the copyright notice format
2010-04-24 09:33:45 +00:00
PlatformDriOverrideDxe
Fixed build failed.
2012-05-31 08:35:48 +00:00
PrintDxe
Update the copyright notice format
2010-04-24 09:33:45 +00:00
ReportStatusCodeRouter
MdeModulePkg: eliminate all implicit library dependencies for all modules in MdeModulePkg on PcdLib
2012-11-01 06:59:25 +00:00
ResetSystemRuntimeDxe
Add missing status code in several modules.
2012-10-30 04:23:40 +00:00
SecurityStubDxe
Update SecurityStub SAP protocol to support SecureHandler and SecureHandler2 both.
2013-02-01 05:34:19 +00:00
SetupBrowserDxe
Update the logic about get initial value for one storage.
2013-05-16 08:41:39 +00:00
SmbiosDxe
Fill SMBIOS BCD revision field.
2013-04-02 07:44:11 +00:00
StatusCodeHandler
EFI_STATUS_CODE_DATA_MAX_SIZE is just for the maximum size of an EFI_DEBUG_INFO structure. Seemly, it is not suitable to be used in SerialStatusCodeHandler, so update SerialStatusCodeHandler to use MAX_DEBUG_MESSAGE_LENGTH (0x100) as the max printed string size to align with other DebugLib’s behavior.
2012-06-12 04:52:23 +00:00
Variable
Remove the complex buffer since the _LOCK_VARIABLE won't be allowed after leaving DXE phase.
2013-05-20 07:04:56 +00:00
WatchdogTimerDxe
Add debug print that the system is about to be reset. I was seeing watchtog timeouts in UnixPkg and they were hard to debug as gdb was exiting. This debug print should be useful in general.
2010-07-30 16:01:09 +00:00