mirror of https://github.com/acidanthera/audk.git
228 lines
7.8 KiB
C
228 lines
7.8 KiB
C
/** @file
|
|
*
|
|
* Copyright (c) 2011, ARM Limited. All rights reserved.
|
|
*
|
|
* This program and the accompanying materials
|
|
* are licensed and made available under the terms and conditions of the BSD License
|
|
* which accompanies this distribution. The full text of the license may be found at
|
|
* http://opensource.org/licenses/bsd-license.php
|
|
*
|
|
* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
|
|
* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
|
|
*
|
|
**/
|
|
|
|
#include <Uefi.h>
|
|
|
|
#include <Library/IoLib.h>
|
|
#include <Library/DebugLib.h>
|
|
|
|
#include <Drivers/PL341Dmc.h>
|
|
|
|
// Macros for writing to DDR2 controller.
|
|
#define DmcWriteReg(reg,val) MmioWrite32(DmcBase + reg, val)
|
|
#define DmcReadReg(reg) MmioRead32(DmcBase + reg)
|
|
|
|
// Macros for writing/reading to DDR2 PHY controller
|
|
#define DmcPhyWriteReg(reg,val) MmioWrite32(DmcPhyBase + reg, val)
|
|
#define DmcPhyReadReg(reg) MmioRead32(DmcPhyBase + reg)
|
|
|
|
// Initialise PL341 Dynamic Memory Controller
|
|
VOID
|
|
PL341DmcInit (
|
|
IN UINTN DmcBase,
|
|
IN PL341_DMC_CONFIG* DmcConfig
|
|
)
|
|
{
|
|
UINTN Index;
|
|
UINT32 Chip;
|
|
|
|
// Set config mode
|
|
DmcWriteReg(DMC_COMMAND_REG, DMC_COMMAND_CONFIGURE);
|
|
|
|
//
|
|
// Setup the QoS AXI ID bits
|
|
//
|
|
if (DmcConfig->HasQos) {
|
|
// CLCD AXIID = 000
|
|
DmcWriteReg(DMC_ID_0_CFG_REG, DMC_ID_CFG_QOS_ENABLE | DMC_ID_CFG_QOS_MIN);
|
|
|
|
// Default disable QoS
|
|
DmcWriteReg(DMC_ID_1_CFG_REG, DMC_ID_CFG_QOS_DISABLE);
|
|
DmcWriteReg(DMC_ID_2_CFG_REG, DMC_ID_CFG_QOS_DISABLE);
|
|
DmcWriteReg(DMC_ID_3_CFG_REG, DMC_ID_CFG_QOS_DISABLE);
|
|
DmcWriteReg(DMC_ID_4_CFG_REG, DMC_ID_CFG_QOS_DISABLE);
|
|
DmcWriteReg(DMC_ID_5_CFG_REG, DMC_ID_CFG_QOS_DISABLE);
|
|
DmcWriteReg(DMC_ID_6_CFG_REG, DMC_ID_CFG_QOS_DISABLE);
|
|
DmcWriteReg(DMC_ID_7_CFG_REG, DMC_ID_CFG_QOS_DISABLE);
|
|
DmcWriteReg(DMC_ID_8_CFG_REG, DMC_ID_CFG_QOS_DISABLE);
|
|
DmcWriteReg(DMC_ID_9_CFG_REG, DMC_ID_CFG_QOS_DISABLE);
|
|
DmcWriteReg(DMC_ID_10_CFG_REG, DMC_ID_CFG_QOS_DISABLE);
|
|
DmcWriteReg(DMC_ID_11_CFG_REG, DMC_ID_CFG_QOS_DISABLE);
|
|
DmcWriteReg(DMC_ID_12_CFG_REG, DMC_ID_CFG_QOS_DISABLE);
|
|
DmcWriteReg(DMC_ID_13_CFG_REG, DMC_ID_CFG_QOS_DISABLE);
|
|
DmcWriteReg(DMC_ID_14_CFG_REG, DMC_ID_CFG_QOS_DISABLE);
|
|
DmcWriteReg(DMC_ID_15_CFG_REG, DMC_ID_CFG_QOS_DISABLE);
|
|
}
|
|
|
|
//
|
|
// Initialise memory controlller
|
|
//
|
|
DmcWriteReg(DMC_REFRESH_PRD_REG, DmcConfig->RefreshPeriod);
|
|
DmcWriteReg(DMC_CAS_LATENCY_REG, DmcConfig->CasLatency);
|
|
DmcWriteReg(DMC_WRITE_LATENCY_REG, DmcConfig->WriteLatency);
|
|
DmcWriteReg(DMC_T_MRD_REG, DmcConfig->t_mrd);
|
|
DmcWriteReg(DMC_T_RAS_REG, DmcConfig->t_ras);
|
|
DmcWriteReg(DMC_T_RC_REG, DmcConfig->t_rc);
|
|
DmcWriteReg(DMC_T_RCD_REG, DmcConfig->t_rcd);
|
|
DmcWriteReg(DMC_T_RFC_REG, DmcConfig->t_rfc);
|
|
DmcWriteReg(DMC_T_RP_REG, DmcConfig->t_rp);
|
|
DmcWriteReg(DMC_T_RRD_REG, DmcConfig->t_rrd);
|
|
DmcWriteReg(DMC_T_WR_REG, DmcConfig->t_wr);
|
|
DmcWriteReg(DMC_T_WTR_REG, DmcConfig->t_wtr);
|
|
DmcWriteReg(DMC_T_XP_REG, DmcConfig->t_xp);
|
|
DmcWriteReg(DMC_T_XSR_REG, DmcConfig->t_xsr);
|
|
DmcWriteReg(DMC_T_ESR_REG, DmcConfig->t_esr);
|
|
DmcWriteReg(DMC_T_FAW_REG, DmcConfig->t_faw);
|
|
DmcWriteReg(DMC_T_WRLAT_DIFF, DmcConfig->t_wdata_en);
|
|
DmcWriteReg(DMC_T_RDATA_EN, DmcConfig->t_data_en);
|
|
|
|
//
|
|
// Initialise PL341 Mem Config Registers
|
|
//
|
|
|
|
// Set PL341 Memory Config
|
|
DmcWriteReg(DMC_MEMORY_CONFIG_REG, DmcConfig->MemoryCfg);
|
|
|
|
// Set PL341 Memory Config 2
|
|
DmcWriteReg(DMC_MEMORY_CFG2_REG, DmcConfig->MemoryCfg2);
|
|
|
|
// Set PL341 Memory Config 3
|
|
DmcWriteReg(DMC_MEMORY_CFG3_REG, DmcConfig->MemoryCfg3);
|
|
|
|
// Set PL341 Chip Select <n>
|
|
DmcWriteReg(DMC_CHIP_0_CFG_REG, DmcConfig->ChipCfg0);
|
|
DmcWriteReg(DMC_CHIP_1_CFG_REG, DmcConfig->ChipCfg1);
|
|
DmcWriteReg(DMC_CHIP_2_CFG_REG, DmcConfig->ChipCfg2);
|
|
DmcWriteReg(DMC_CHIP_3_CFG_REG, DmcConfig->ChipCfg3);
|
|
|
|
// Delay
|
|
for (Index = 0; Index < 10; Index++) {
|
|
DmcReadReg(DMC_STATUS_REG);
|
|
}
|
|
|
|
if (DmcConfig->IsUserCfg) {
|
|
//
|
|
// Set Test Chip PHY Registers via PL341 User Config Reg
|
|
// Note that user_cfgX registers are Write Only
|
|
//
|
|
// DLL Freq set = 250MHz - 266MHz
|
|
//
|
|
DmcWriteReg(DMC_USER_0_CFG_REG, DmcConfig->User0Cfg);
|
|
|
|
// user_config2
|
|
// ------------
|
|
// Set defaults before calibrating the DDR2 buffer impendence
|
|
// - Disable ODT
|
|
// - Default drive strengths
|
|
DmcWriteReg(DMC_USER_2_CFG_REG, 0x40000198);
|
|
|
|
//
|
|
// Auto calibrate the DDR2 buffers impendence
|
|
//
|
|
while (!(DmcReadReg(DMC_USER_STATUS_REG) & 0x100));
|
|
|
|
// Set the output driven strength
|
|
DmcWriteReg(DMC_USER_2_CFG_REG, 0x40800000 | DmcConfig->User2Cfg);
|
|
|
|
//
|
|
// Set PL341 Feature Control Register
|
|
//
|
|
// Disable early BRESP - use to optimise CLCD performance
|
|
DmcWriteReg(DMC_FEATURE_CRTL_REG, 0x00000001);
|
|
}
|
|
|
|
//
|
|
// Config memories
|
|
//
|
|
for (Chip = 0; Chip < DmcConfig->MaxChip; Chip++) {
|
|
// Send nop
|
|
DmcWriteReg(DMC_DIRECT_CMD_REG, DMC_DIRECT_CMD_CHIP_ADDR(Chip) | DMC_DIRECT_CMD_MEMCMD_NOP);
|
|
|
|
// Pre-charge all
|
|
DmcWriteReg(DMC_DIRECT_CMD_REG, DMC_DIRECT_CMD_CHIP_ADDR(Chip) | DMC_DIRECT_CMD_MEMCMD_PRECHARGEALL);
|
|
|
|
// Delay
|
|
for (Index = 0; Index < 10; Index++) {
|
|
DmcReadReg(DMC_STATUS_REG);
|
|
}
|
|
|
|
// Set (EMR2) extended mode register 2
|
|
DmcWriteReg(DMC_DIRECT_CMD_REG,
|
|
DMC_DIRECT_CMD_CHIP_ADDR(Chip) |
|
|
DMC_DIRECT_CMD_BANKADDR(2) |
|
|
DMC_DIRECT_CMD_MEMCMD_EXTMODEREG);
|
|
|
|
// Set (EMR3) extended mode register 3
|
|
DmcWriteReg(DMC_DIRECT_CMD_REG,
|
|
DMC_DIRECT_CMD_CHIP_ADDR(Chip) |
|
|
DMC_DIRECT_CMD_BANKADDR(3) |
|
|
DMC_DIRECT_CMD_MEMCMD_EXTMODEREG);
|
|
|
|
//
|
|
// Set (EMR) Extended Mode Register
|
|
//
|
|
// Put into OCD default state
|
|
DmcWriteReg(DMC_DIRECT_CMD_REG,DMC_DIRECT_CMD_CHIP_ADDR(Chip) | DMC_DIRECT_CMD_BANKADDR(1) | DMC_DIRECT_CMD_MEMCMD_EXTMODEREG);
|
|
|
|
//
|
|
// Set (MR) mode register - With DLL reset
|
|
//
|
|
DmcWriteReg(DMC_DIRECT_CMD_REG, DMC_DIRECT_CMD_CHIP_ADDR(Chip) | DMC_DIRECT_CMD_MEMCMD_EXTMODEREG | DmcConfig->ModeReg | DDR2_MR_DLL_RESET);
|
|
|
|
// Pre-charge all
|
|
DmcWriteReg(DMC_DIRECT_CMD_REG, DMC_DIRECT_CMD_CHIP_ADDR(Chip) | DMC_DIRECT_CMD_MEMCMD_PRECHARGEALL);
|
|
// Auto-refresh
|
|
DmcWriteReg(DMC_DIRECT_CMD_REG, DMC_DIRECT_CMD_CHIP_ADDR(Chip) | DMC_DIRECT_CMD_MEMCMD_AUTOREFRESH);
|
|
// Auto-refresh
|
|
DmcWriteReg(DMC_DIRECT_CMD_REG, DMC_DIRECT_CMD_CHIP_ADDR(Chip) | DMC_DIRECT_CMD_MEMCMD_AUTOREFRESH);
|
|
|
|
//
|
|
// Set (MR) mode register - Without DLL reset
|
|
//
|
|
DmcWriteReg(DMC_DIRECT_CMD_REG, DMC_DIRECT_CMD_CHIP_ADDR(Chip) | DMC_DIRECT_CMD_MEMCMD_EXTMODEREG | DmcConfig->ModeReg);
|
|
|
|
// Delay
|
|
for (Index = 0; Index < 10; Index++) {
|
|
DmcReadReg(DMC_STATUS_REG);
|
|
}
|
|
|
|
//
|
|
// Set (EMR) extended mode register - Enable OCD defaults
|
|
//
|
|
DmcWriteReg(DMC_DIRECT_CMD_REG, DMC_DIRECT_CMD_CHIP_ADDR(Chip) | (0x00090000) |
|
|
(1 << DDR_MODESET_SHFT) | (DDR_EMR_OCD_DEFAULT << DDR_EMR_OCD_SHIFT) | DmcConfig->ExtModeReg);
|
|
|
|
// Delay
|
|
for (Index = 0; Index < 10; Index++) {
|
|
DmcReadReg(DMC_STATUS_REG);
|
|
}
|
|
|
|
// Set (EMR) extended mode register - OCD Exit
|
|
DmcWriteReg(DMC_DIRECT_CMD_REG, DMC_DIRECT_CMD_CHIP_ADDR(Chip) | (0x00090000) |
|
|
(1 << DDR_MODESET_SHFT) | (DDR_EMR_OCD_NS << DDR_EMR_OCD_SHIFT) | DmcConfig->ExtModeReg);
|
|
|
|
// Delay
|
|
for (Index = 0; Index < 10; Index++) {
|
|
DmcReadReg(DMC_STATUS_REG);
|
|
}
|
|
}
|
|
|
|
// Move DDR2 Controller to Ready state by issueing GO command
|
|
DmcWriteReg(DMC_COMMAND_REG, DMC_COMMAND_GO);
|
|
|
|
// wait for ready
|
|
while (!(DmcReadReg(DMC_STATUS_REG) & DMC_STATUS_READY));
|
|
|
|
}
|