audk/NetworkPkg/IScsiDxe/IScsiMisc.h

434 lines
12 KiB
C

/** @file
Miscellaneous definitions for iSCSI driver.
Copyright (c) 2004 - 2017, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#ifndef _ISCSI_MISC_H_
#define _ISCSI_MISC_H_
typedef struct _ISCSI_DRIVER_DATA ISCSI_DRIVER_DATA;
///
/// IPv4 Device Path Node Length
///
#define IP4_NODE_LEN_NEW_VERSIONS 27
///
/// IPv6 Device Path Node Length
///
#define IP6_NODE_LEN_OLD_VERSIONS 43
#define IP6_NODE_LEN_NEW_VERSIONS 60
///
/// The ignored field StaticIpAddress's offset in old IPv6 Device Path
///
#define IP6_OLD_IPADDRESS_OFFSET 42
#pragma pack(1)
typedef struct _ISCSI_SESSION_CONFIG_NVDATA {
UINT16 TargetPort;
UINT8 Enabled;
UINT8 IpMode;
EFI_IP_ADDRESS LocalIp;
EFI_IPv4_ADDRESS SubnetMask;
EFI_IP_ADDRESS Gateway;
BOOLEAN InitiatorInfoFromDhcp;
BOOLEAN TargetInfoFromDhcp;
CHAR8 TargetName[ISCSI_NAME_MAX_SIZE];
EFI_IP_ADDRESS TargetIp;
UINT8 PrefixLength;
UINT8 BootLun[8];
UINT16 ConnectTimeout; ///< timout value in milliseconds.
UINT8 ConnectRetryCount;
UINT8 IsId[6];
BOOLEAN RedirectFlag;
UINT16 OriginalTargetPort; // The port of proxy/virtual target.
EFI_IP_ADDRESS OriginalTargetIp; // The address of proxy/virtual target.
BOOLEAN DnsMode; // Flag indicate whether the Target address is expressed as URL format.
CHAR8 TargetUrl[ISCSI_TARGET_URI_MAX_SIZE];
} ISCSI_SESSION_CONFIG_NVDATA;
#pragma pack()
/**
Calculate the prefix length of the IPv4 subnet mask.
@param[in] SubnetMask The IPv4 subnet mask.
@return The prefix length of the subnet mask.
@retval 0 Other errors as indicated.
**/
UINT8
IScsiGetSubnetMaskPrefixLength (
IN EFI_IPv4_ADDRESS *SubnetMask
);
/**
Convert the hexadecimal encoded LUN string into the 64-bit LUN.
@param[in] Str The hexadecimal encoded LUN string.
@param[out] Lun Storage to return the 64-bit LUN.
@retval EFI_SUCCESS The 64-bit LUN is stored in Lun.
@retval EFI_INVALID_PARAMETER The string is malformatted.
**/
EFI_STATUS
IScsiAsciiStrToLun (
IN CHAR8 *Str,
OUT UINT8 *Lun
);
/**
Convert the 64-bit LUN into the hexadecimal encoded LUN string.
@param[in] Lun The 64-bit LUN.
@param[out] String The storage to return the hexadecimal encoded LUN string.
**/
VOID
IScsiLunToUnicodeStr (
IN UINT8 *Lun,
OUT CHAR16 *String
);
/**
Convert the mac address into a hexadecimal encoded "-" seperated string.
@param[in] Mac The mac address.
@param[in] Len Length in bytes of the mac address.
@param[in] VlanId VLAN ID of the network device.
@param[out] Str The storage to return the mac string.
**/
VOID
IScsiMacAddrToStr (
IN EFI_MAC_ADDRESS *Mac,
IN UINT32 Len,
IN UINT16 VlanId,
OUT CHAR16 *Str
);
/**
Convert the formatted IP address into the binary IP address.
@param[in] Str The UNICODE string.
@param[in] IpMode Indicates whether the IP address is v4 or v6.
@param[out] Ip The storage to return the ASCII string.
@retval EFI_SUCCESS The binary IP address is returned in Ip.
@retval EFI_INVALID_PARAMETER The IP string is malformatted or IpMode is
invalid.
**/
EFI_STATUS
IScsiAsciiStrToIp (
IN CHAR8 *Str,
IN UINT8 IpMode,
OUT EFI_IP_ADDRESS *Ip
);
/**
Convert the binary encoded buffer into a hexadecimal encoded string.
@param[in] BinBuffer The buffer containing the binary data.
@param[in] BinLength Length of the binary buffer.
@param[in, out] HexStr Pointer to the string.
@param[in, out] HexLength The length of the string.
@retval EFI_SUCCESS The binary data is converted to the hexadecimal string
and the length of the string is updated.
@retval EFI_BUFFER_TOO_SMALL The string is too small.
@retval EFI_INVALID_PARAMETER The IP string is malformatted.
**/
EFI_STATUS
IScsiBinToHex (
IN UINT8 *BinBuffer,
IN UINT32 BinLength,
IN OUT CHAR8 *HexStr,
IN OUT UINT32 *HexLength
);
/**
Convert the hexadecimal string into a binary encoded buffer.
@param[in, out] BinBuffer The binary buffer.
@param[in, out] BinLength Length of the binary buffer.
@param[in] HexStr The hexadecimal string.
@retval EFI_SUCCESS The hexadecimal string is converted into a binary
encoded buffer.
@retval EFI_BUFFER_TOO_SMALL The binary buffer is too small to hold the converted data.
**/
EFI_STATUS
IScsiHexToBin (
IN OUT UINT8 *BinBuffer,
IN OUT UINT32 *BinLength,
IN CHAR8 *HexStr
);
/**
Convert the decimal-constant string or hex-constant string into a numerical value.
@param[in] Str String in decimal or hex.
@return The numerical value.
**/
UINTN
IScsiNetNtoi (
IN CHAR8 *Str
);
/**
Generate random numbers.
@param[in, out] Rand The buffer to contain random numbers.
@param[in] RandLength The length of the Rand buffer.
**/
VOID
IScsiGenRandom (
IN OUT UINT8 *Rand,
IN UINTN RandLength
);
/**
Record the NIC information in a global structure.
@param[in] Controller The handle of the controller.
@retval EFI_SUCCESS The operation is completed.
@retval EFI_OUT_OF_RESOURCES Do not have sufficient resource to finish this
operation.
**/
EFI_STATUS
IScsiAddNic (
IN EFI_HANDLE Controller
);
/**
Delete the recorded NIC information from a global structure. Also delete corresponding
attempts.
@param[in] Controller The handle of the controller.
@retval EFI_SUCCESS The operation completed.
@retval EFI_NOT_FOUND The NIC information to be deleted is not recorded.
**/
EFI_STATUS
IScsiRemoveNic (
IN EFI_HANDLE Controller
);
/**
Get the recorded NIC information from a global structure by the Index.
@param[in] NicIndex The index indicates the position of NIC info.
@return Pointer to the NIC info or NULL if not found.
**/
ISCSI_NIC_INFO *
IScsiGetNicInfoByIndex (
IN UINT8 NicIndex
);
/**
Get the NIC's PCI location and return it according to the composited
format defined in iSCSI Boot Firmware Table.
@param[in] Controller The handle of the controller.
@param[out] Bus The bus number.
@param[out] Device The device number.
@param[out] Function The function number.
@return The composited representation of the NIC PCI location.
**/
UINT16
IScsiGetNICPciLocation (
IN EFI_HANDLE Controller,
OUT UINTN *Bus,
OUT UINTN *Device,
OUT UINTN *Function
);
/**
Read the EFI variable (VendorGuid/Name) and return a dynamically allocated
buffer, and the size of the buffer. If failure, return NULL.
@param[in] Name String part of EFI variable name.
@param[in] VendorGuid GUID part of EFI variable name.
@param[out] VariableSize Returns the size of the EFI variable that was read.
@return Dynamically allocated memory that contains a copy of the EFI variable.
@return Caller is responsible freeing the buffer.
@retval NULL Variable was not read.
**/
VOID *
IScsiGetVariableAndSize (
IN CHAR16 *Name,
IN EFI_GUID *VendorGuid,
OUT UINTN *VariableSize
);
/**
Create the iSCSI driver data.
@param[in] Image The handle of the driver image.
@param[in] Controller The handle of the controller.
@return The iSCSI driver data created.
@retval NULL Other errors as indicated.
**/
ISCSI_DRIVER_DATA *
IScsiCreateDriverData (
IN EFI_HANDLE Image,
IN EFI_HANDLE Controller
);
/**
Clean the iSCSI driver data.
@param[in] Private The iSCSI driver data.
@retval EFI_SUCCES The clean operation is successful.
@retval Others Other errors as indicated.
**/
EFI_STATUS
IScsiCleanDriverData (
IN ISCSI_DRIVER_DATA *Private
);
/**
Check wheather the Controller handle is configured to use DHCP protocol.
@param[in] Controller The handle of the controller.
@param[in] IpVersion IP_VERSION_4 or IP_VERSION_6.
@retval TRUE The handle of the controller need the Dhcp protocol.
@retval FALSE The handle of the controller does not need the Dhcp protocol.
**/
BOOLEAN
IScsiDhcpIsConfigured (
IN EFI_HANDLE Controller,
IN UINT8 IpVersion
);
/**
Check wheather the Controller handle is configured to use DNS protocol.
@param[in] Controller The handle of the controller.
@retval TRUE The handle of the controller need the DNS protocol.
@retval FALSE The handle of the controller does not need the DNS protocol.
**/
BOOLEAN
IScsiDnsIsConfigured (
IN EFI_HANDLE Controller
);
/**
Get the various configuration data of this iSCSI instance.
@param[in] Private The iSCSI driver data.
@retval EFI_SUCCESS Obtained the configuration of this instance.
@retval EFI_ABORTED The operation was aborted.
@retval Others Other errors as indicated.
**/
EFI_STATUS
IScsiGetConfigData (
IN ISCSI_DRIVER_DATA *Private
);
/**
Get the device path of the iSCSI tcp connection and update it.
@param[in] Session The iSCSI session data.
@return The updated device path.
@retval NULL Other errors as indicated.
**/
EFI_DEVICE_PATH_PROTOCOL *
IScsiGetTcpConnDevicePath (
IN ISCSI_SESSION *Session
);
/**
Abort the session when the transition from BS to RT is initiated.
@param[in] Event The event signaled.
@param[in] Context The iSCSI driver data.
**/
VOID
EFIAPI
IScsiOnExitBootService (
IN EFI_EVENT Event,
IN VOID *Context
);
/**
Tests whether a controller handle is being managed by IScsi driver.
This function tests whether the driver specified by DriverBindingHandle is
currently managing the controller specified by ControllerHandle. This test
is performed by evaluating if the the protocol specified by ProtocolGuid is
present on ControllerHandle and is was opened by DriverBindingHandle and Nic
Device handle with an attribute of EFI_OPEN_PROTOCOL_BY_DRIVER.
If ProtocolGuid is NULL, then ASSERT().
@param ControllerHandle A handle for a controller to test.
@param DriverBindingHandle Specifies the driver binding handle for the
driver.
@param ProtocolGuid Specifies the protocol that the driver specified
by DriverBindingHandle opens in its Start()
function.
@retval EFI_SUCCESS ControllerHandle is managed by the driver
specified by DriverBindingHandle.
@retval EFI_UNSUPPORTED ControllerHandle is not managed by the driver
specified by DriverBindingHandle.
**/
EFI_STATUS
EFIAPI
IScsiTestManagedDevice (
IN EFI_HANDLE ControllerHandle,
IN EFI_HANDLE DriverBindingHandle,
IN EFI_GUID *ProtocolGuid
);
#endif