audk/Omap35xxPkg/MMCHSDxe/MMCHS.h

170 lines
6.8 KiB
C

/** @file
Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>
SPDX-License-Identifier: BSD-2-Clause-Patent
**/
#ifndef _MMCHS_H_
#define _MMCHS_H_
#include <Uefi.h>
#include <Library/BaseLib.h>
#include <Library/MemoryAllocationLib.h>
#include <Library/DebugLib.h>
#include <Library/IoLib.h>
#include <Library/PcdLib.h>
#include <Library/UefiBootServicesTableLib.h>
#include <Library/BaseMemoryLib.h>
#include <Library/OmapLib.h>
#include <Library/OmapDmaLib.h>
#include <Library/DmaLib.h>
#include <Protocol/EmbeddedExternalDevice.h>
#include <Protocol/BlockIo.h>
#include <Protocol/DevicePath.h>
#include <Omap3530/Omap3530.h>
#include <TPS65950.h>
#define MAX_RETRY_COUNT (100*5)
#define HCS BIT30 //Host capacity support/1 = Supporting high capacity
#define CCS BIT30 //Card capacity status/1 = High capacity card
typedef struct {
UINT32 Reserved0: 7; // 0
UINT32 V170_V195: 1; // 1.70V - 1.95V
UINT32 V200_V260: 7; // 2.00V - 2.60V
UINT32 V270_V360: 9; // 2.70V - 3.60V
UINT32 RESERVED_1: 5; // Reserved
UINT32 AccessMode: 2; // 00b (byte mode), 10b (sector mode)
UINT32 Busy: 1; // This bit is set to LOW if the card has not finished the power up routine
}OCR;
typedef struct {
UINT32 NOT_USED; // 1 [0:0]
UINT32 CRC; // CRC7 checksum [7:1]
UINT32 MDT; // Manufacturing date [19:8]
UINT32 RESERVED_1; // Reserved [23:20]
UINT32 PSN; // Product serial number [55:24]
UINT8 PRV; // Product revision [63:56]
UINT8 PNM[5]; // Product name [64:103]
UINT16 OID; // OEM/Application ID [119:104]
UINT8 MID; // Manufacturer ID [127:120]
}CID;
typedef struct {
UINT8 NOT_USED: 1; // Not used, always 1 [0:0]
UINT8 CRC: 7; // CRC [7:1]
UINT8 RESERVED_1: 2; // Reserved [9:8]
UINT8 FILE_FORMAT: 2; // File format [11:10]
UINT8 TMP_WRITE_PROTECT: 1; // Temporary write protection [12:12]
UINT8 PERM_WRITE_PROTECT: 1; // Permanent write protection [13:13]
UINT8 COPY: 1; // Copy flag (OTP) [14:14]
UINT8 FILE_FORMAT_GRP: 1; // File format group [15:15]
UINT16 RESERVED_2: 5; // Reserved [20:16]
UINT16 WRITE_BL_PARTIAL: 1; // Partial blocks for write allowed [21:21]
UINT16 WRITE_BL_LEN: 4; // Max. write data block length [25:22]
UINT16 R2W_FACTOR: 3; // Write speed factor [28:26]
UINT16 RESERVED_3: 2; // Reserved [30:29]
UINT16 WP_GRP_ENABLE: 1; // Write protect group enable [31:31]
UINT32 WP_GRP_SIZE: 7; // Write protect group size [38:32]
UINT32 SECTOR_SIZE: 7; // Erase sector size [45:39]
UINT32 ERASE_BLK_EN: 1; // Erase single block enable [46:46]
UINT32 C_SIZE_MULT: 3; // Device size multiplier [49:47]
UINT32 VDD_W_CURR_MAX: 3; // Max. write current @ VDD max [52:50]
UINT32 VDD_W_CURR_MIN: 3; // Max. write current @ VDD min [55:53]
UINT32 VDD_R_CURR_MAX: 3; // Max. read current @ VDD max [58:56]
UINT32 VDD_R_CURR_MIN: 3; // Max. read current @ VDD min [61:59]
UINT32 C_SIZELow2: 2; // Device size [63:62]
UINT32 C_SIZEHigh10: 10;// Device size [73:64]
UINT32 RESERVED_4: 2; // Reserved [75:74]
UINT32 DSR_IMP: 1; // DSR implemented [76:76]
UINT32 READ_BLK_MISALIGN: 1; // Read block misalignment [77:77]
UINT32 WRITE_BLK_MISALIGN: 1; // Write block misalignment [78:78]
UINT32 READ_BL_PARTIAL: 1; // Partial blocks for read allowed [79:79]
UINT32 READ_BL_LEN: 4; // Max. read data block length [83:80]
UINT32 CCC: 12;// Card command classes [95:84]
UINT8 TRAN_SPEED ; // Max. bus clock frequency [103:96]
UINT8 NSAC ; // Data read access-time 2 in CLK cycles (NSAC*100) [111:104]
UINT8 TAAC ; // Data read access-time 1 [119:112]
UINT8 RESERVED_5: 6; // Reserved [125:120]
UINT8 CSD_STRUCTURE: 2; // CSD structure [127:126]
}CSD;
typedef struct {
UINT8 NOT_USED: 1; // Not used, always 1 [0:0]
UINT8 CRC: 7; // CRC [7:1]
UINT8 RESERVED_1: 2; // Reserved [9:8]
UINT8 FILE_FORMAT: 2; // File format [11:10]
UINT8 TMP_WRITE_PROTECT: 1; // Temporary write protection [12:12]
UINT8 PERM_WRITE_PROTECT: 1; // Permanent write protection [13:13]
UINT8 COPY: 1; // Copy flag (OTP) [14:14]
UINT8 FILE_FORMAT_GRP: 1; // File format group [15:15]
UINT16 RESERVED_2: 5; // Reserved [20:16]
UINT16 WRITE_BL_PARTIAL: 1; // Partial blocks for write allowed [21:21]
UINT16 WRITE_BL_LEN: 4; // Max. write data block length [25:22]
UINT16 R2W_FACTOR: 3; // Write speed factor [28:26]
UINT16 RESERVED_3: 2; // Reserved [30:29]
UINT16 WP_GRP_ENABLE: 1; // Write protect group enable [31:31]
UINT16 WP_GRP_SIZE: 7; // Write protect group size [38:32]
UINT16 SECTOR_SIZE: 7; // Erase sector size [45:39]
UINT16 ERASE_BLK_EN: 1; // Erase single block enable [46:46]
UINT16 RESERVED_4: 1; // Reserved [47:47]
UINT32 C_SIZELow16: 16;// Device size [69:48]
UINT32 C_SIZEHigh6: 6; // Device size [69:48]
UINT32 RESERVED_5: 6; // Reserved [75:70]
UINT32 DSR_IMP: 1; // DSR implemented [76:76]
UINT32 READ_BLK_MISALIGN: 1; // Read block misalignment [77:77]
UINT32 WRITE_BLK_MISALIGN: 1; // Write block misalignment [78:78]
UINT32 READ_BL_PARTIAL: 1; // Partial blocks for read allowed [79:79]
UINT16 READ_BL_LEN: 4; // Max. read data block length [83:80]
UINT16 CCC: 12;// Card command classes [95:84]
UINT8 TRAN_SPEED ; // Max. bus clock frequency [103:96]
UINT8 NSAC ; // Data read access-time 2 in CLK cycles (NSAC*100) [111:104]
UINT8 TAAC ; // Data read access-time 1 [119:112]
UINT8 RESERVED_6: 6; // 0 [125:120]
UINT8 CSD_STRUCTURE: 2; // CSD structure [127:126]
}CSD_SDV2;
typedef enum {
UNKNOWN_CARD,
MMC_CARD, //MMC card
SD_CARD, //SD 1.1 card
SD_CARD_2, //SD 2.0 or above standard card
SD_CARD_2_HIGH //SD 2.0 or above high capacity card
} CARD_TYPE;
typedef enum {
READ,
WRITE
} OPERATION_TYPE;
typedef struct {
UINT16 RCA;
UINTN BlockSize;
UINTN NumBlocks;
UINTN ClockFrequencySelect;
CARD_TYPE CardType;
OCR OCRData;
CID CIDData;
CSD CSDData;
} CARD_INFO;
EFI_STATUS
DetectCard (
VOID
);
extern EFI_BLOCK_IO_PROTOCOL gBlockIo;
#endif