tyler.durden
/
audk
mirror of https://github.com/acidanthera/audk.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
audk/UefiCpuPkg/CpuDxe/CpuMp.c

1710 lines
58 KiB
C
Raw Blame History

/** @file
CPU DXE Module.
Copyright (c) 2008 - 2015, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include "CpuDxe.h"
#include "CpuMp.h"
UINTN gMaxLogicalProcessorNumber;
UINTN gApStackSize;
UINTN gPollInterval = 100; // 100 microseconds
MP_SYSTEM_DATA mMpSystemData;
EFI_HANDLE mMpServiceHandle = NULL;
EFI_EVENT mExitBootServicesEvent = (EFI_EVENT)NULL;
VOID *mCommonStack = 0;
VOID *mTopOfApCommonStack = 0;
VOID *mApStackStart = 0;
volatile BOOLEAN mAPsAlreadyInitFinished = FALSE;
volatile BOOLEAN mStopCheckAllAPsStatus = TRUE;
EFI_MP_SERVICES_PROTOCOL mMpServicesTemplate = {
GetNumberOfProcessors,
GetProcessorInfo,
StartupAllAPs,
StartupThisAP,
SwitchBSP,
EnableDisableAP,
WhoAmI
};
/**
Get Mp Service Lock.
@param CpuData the pointer to CPU_DATA_BLOCK of specified processor
**/
VOID
GetMpSpinLock (
IN CPU_DATA_BLOCK *CpuData
)
{
while (!AcquireSpinLockOrFail (&CpuData->CpuDataLock)) {
CpuPause ();
}
CpuData->LockSelf = GetApicId ();
}
/**
Release Mp Service Lock.
@param CpuData the pointer to CPU_DATA_BLOCK of specified processor
**/
VOID
ReleaseMpSpinLock (
IN CPU_DATA_BLOCK *CpuData
)
{
ReleaseSpinLock (&CpuData->CpuDataLock);
}
/**
Check whether caller processor is BSP.
@retval TRUE the caller is BSP
@retval FALSE the caller is AP
**/
BOOLEAN
IsBSP (
VOID
)
{
UINTN CpuIndex;
CPU_DATA_BLOCK *CpuData;
CpuData = NULL;
WhoAmI (&mMpServicesTemplate, &CpuIndex);
CpuData = &mMpSystemData.CpuDatas[CpuIndex];
return CpuData->Info.StatusFlag & PROCESSOR_AS_BSP_BIT ? TRUE : FALSE;
}
/**
Get the Application Processors state.
@param CpuData the pointer to CPU_DATA_BLOCK of specified AP
@retval CPU_STATE the AP status
**/
CPU_STATE
GetApState (
IN CPU_DATA_BLOCK *CpuData
)
{
CPU_STATE State;
GetMpSpinLock (CpuData);
State = CpuData->State;
ReleaseMpSpinLock (CpuData);
return State;
}
/**
Set the Application Processors state.
@param CpuData The pointer to CPU_DATA_BLOCK of specified AP
@param State The AP status
**/
VOID
SetApState (
IN CPU_DATA_BLOCK *CpuData,
IN CPU_STATE State
)
{
GetMpSpinLock (CpuData);
CpuData->State = State;
ReleaseMpSpinLock (CpuData);
}
/**
Set the Application Processor prepare to run a function specified
by Params.
@param CpuData the pointer to CPU_DATA_BLOCK of specified AP
@param Procedure A pointer to the function to be run on enabled APs of the system
@param ProcedureArgument Pointer to the optional parameter of the assigned function
**/
VOID
SetApProcedure (
IN CPU_DATA_BLOCK *CpuData,
IN EFI_AP_PROCEDURE Procedure,
IN VOID *ProcedureArgument
)
{
GetMpSpinLock (CpuData);
CpuData->Parameter = ProcedureArgument;
CpuData->Procedure = Procedure;
ReleaseMpSpinLock (CpuData);
}
/**
Check the Application Processors Status whether contains the Flags.
@param CpuData the pointer to CPU_DATA_BLOCK of specified AP
@param Flags the StatusFlag describing in EFI_PROCESSOR_INFORMATION
@retval TRUE the AP status includes the StatusFlag
@retval FALSE the AP status excludes the StatusFlag
**/
BOOLEAN
TestCpuStatusFlag (
IN CPU_DATA_BLOCK *CpuData,
IN UINT32 Flags
)
{
UINT32 Ret;
GetMpSpinLock (CpuData);
Ret = CpuData->Info.StatusFlag & Flags;
ReleaseMpSpinLock (CpuData);
return (BOOLEAN) (Ret != 0);
}
/**
Bitwise-Or of the Application Processors Status with the Flags.
@param CpuData the pointer to CPU_DATA_BLOCK of specified AP
@param Flags the StatusFlag describing in EFI_PROCESSOR_INFORMATION
**/
VOID
CpuStatusFlagOr (
IN CPU_DATA_BLOCK *CpuData,
IN UINT32 Flags
)
{
GetMpSpinLock (CpuData);
CpuData->Info.StatusFlag |= Flags;
ReleaseMpSpinLock (CpuData);
}
/**
Bitwise-AndNot of the Application Processors Status with the Flags.
@param CpuData the pointer to CPU_DATA_BLOCK of specified AP
@param Flags the StatusFlag describing in EFI_PROCESSOR_INFORMATION
**/
VOID
CpuStatusFlagAndNot (
IN CPU_DATA_BLOCK *CpuData,
IN UINT32 Flags
)
{
GetMpSpinLock (CpuData);
CpuData->Info.StatusFlag &= ~Flags;
ReleaseMpSpinLock (CpuData);
}
/**
Searches for the next blocking AP.
Search for the next AP that is put in blocking state by single-threaded StartupAllAPs().
@param NextNumber Pointer to the processor number of the next blocking AP.
@retval EFI_SUCCESS The next blocking AP has been found.
@retval EFI_NOT_FOUND No blocking AP exists.
**/
EFI_STATUS
GetNextBlockedNumber (
OUT UINTN *NextNumber
)
{
UINTN Number;
CPU_STATE CpuState;
CPU_DATA_BLOCK *CpuData;
for (Number = 0; Number < mMpSystemData.NumberOfProcessors; Number++) {
CpuData = &mMpSystemData.CpuDatas[Number];
if (TestCpuStatusFlag (CpuData, PROCESSOR_AS_BSP_BIT)) {
//
// Skip BSP
//
continue;
}
CpuState = GetApState (CpuData);
if (CpuState == CpuStateBlocked) {
*NextNumber = Number;
return EFI_SUCCESS;
}
}
return EFI_NOT_FOUND;
}
/**
Check if the APs state are finished, and update them to idle state
by StartupAllAPs().
**/
VOID
CheckAndUpdateAllAPsToIdleState (
VOID
)
{
UINTN ProcessorNumber;
UINTN NextNumber;
CPU_DATA_BLOCK *CpuData;
EFI_STATUS Status;
CPU_STATE CpuState;
for (ProcessorNumber = 0; ProcessorNumber < mMpSystemData.NumberOfProcessors; ProcessorNumber++) {
CpuData = &mMpSystemData.CpuDatas[ProcessorNumber];
if (TestCpuStatusFlag (CpuData, PROCESSOR_AS_BSP_BIT)) {
//
// Skip BSP
//
continue;
}
if (!TestCpuStatusFlag (CpuData, PROCESSOR_ENABLED_BIT)) {
//
// Skip Disabled processors
//
continue;
}
CpuState = GetApState (CpuData);
if (CpuState == CpuStateFinished) {
mMpSystemData.FinishCount++;
if (mMpSystemData.SingleThread) {
Status = GetNextBlockedNumber (&NextNumber);
if (!EFI_ERROR (Status)) {
SetApState (&mMpSystemData.CpuDatas[NextNumber], CpuStateReady);
SetApProcedure (&mMpSystemData.CpuDatas[NextNumber],
mMpSystemData.Procedure,
mMpSystemData.ProcedureArgument);
//
// If this AP previous state is blocked, we should
// wake up this AP by sent a SIPI. and avoid
// re-involve the sleeping state. we must call
// SetApProcedure() first.
//
ResetProcessorToIdleState (&mMpSystemData.CpuDatas[NextNumber]);
}
}
SetApState (CpuData, CpuStateIdle);
}
}
}
/**
If the timeout expires before all APs returns from Procedure,
we should forcibly terminate the executing AP and fill FailedList back
by StartupAllAPs().
**/
VOID
ResetAllFailedAPs (
VOID
)
{
CPU_DATA_BLOCK *CpuData;
UINTN Number;
CPU_STATE CpuState;
if (mMpSystemData.FailedList != NULL) {
*mMpSystemData.FailedList = AllocatePool ((mMpSystemData.StartCount - mMpSystemData.FinishCount + 1) * sizeof(UINTN));
ASSERT (*mMpSystemData.FailedList != NULL);
}
for (Number = 0; Number < mMpSystemData.NumberOfProcessors; Number++) {
CpuData = &mMpSystemData.CpuDatas[Number];
if (TestCpuStatusFlag (CpuData, PROCESSOR_AS_BSP_BIT)) {
//
// Skip BSP
//
continue;
}
if (!TestCpuStatusFlag (CpuData, PROCESSOR_ENABLED_BIT)) {
//
// Skip Disabled processors
//
continue;
}
CpuState = GetApState (CpuData);
if (CpuState != CpuStateIdle &&
CpuState != CpuStateSleeping) {
if (mMpSystemData.FailedList != NULL) {
(*mMpSystemData.FailedList)[mMpSystemData.FailedListIndex++] = Number;
}
ResetProcessorToIdleState (CpuData);
}
}
if (mMpSystemData.FailedList != NULL) {
(*mMpSystemData.FailedList)[mMpSystemData.FailedListIndex] = END_OF_CPU_LIST;
}
}
/**
This service retrieves the number of logical processor in the platform
and the number of those logical processors that are enabled on this boot.
This service may only be called from the BSP.
This function is used to retrieve the following information:
- The number of logical processors that are present in the system.
- The number of enabled logical processors in the system at the instant
this call is made.
Because MP Service Protocol provides services to enable and disable processors
dynamically, the number of enabled logical processors may vary during the
course of a boot session.
If this service is called from an AP, then EFI_DEVICE_ERROR is returned.
If NumberOfProcessors or NumberOfEnabledProcessors is NULL, then
EFI_INVALID_PARAMETER is returned. Otherwise, the total number of processors
is returned in NumberOfProcessors, the number of currently enabled processor
is returned in NumberOfEnabledProcessors, and EFI_SUCCESS is returned.
@param[in] This A pointer to the EFI_MP_SERVICES_PROTOCOL
instance.
@param[out] NumberOfProcessors Pointer to the total number of logical
processors in the system, including the BSP
and disabled APs.
@param[out] NumberOfEnabledProcessors Pointer to the number of enabled logical
processors that exist in system, including
the BSP.
@retval EFI_SUCCESS The number of logical processors and enabled
logical processors was retrieved.
@retval EFI_DEVICE_ERROR The calling processor is an AP.
@retval EFI_INVALID_PARAMETER NumberOfProcessors is NULL.
@retval EFI_INVALID_PARAMETER NumberOfEnabledProcessors is NULL.
**/
EFI_STATUS
EFIAPI
GetNumberOfProcessors (
IN EFI_MP_SERVICES_PROTOCOL *This,
OUT UINTN *NumberOfProcessors,
OUT UINTN *NumberOfEnabledProcessors
)
{
if ((NumberOfProcessors == NULL) || (NumberOfEnabledProcessors == NULL)) {
return EFI_INVALID_PARAMETER;
}
if (!IsBSP ()) {
return EFI_DEVICE_ERROR;
}
*NumberOfProcessors = mMpSystemData.NumberOfProcessors;
*NumberOfEnabledProcessors = mMpSystemData.NumberOfEnabledProcessors;
return EFI_SUCCESS;
}
/**
Gets detailed MP-related information on the requested processor at the
instant this call is made. This service may only be called from the BSP.
This service retrieves detailed MP-related information about any processor
on the platform. Note the following:
- The processor information may change during the course of a boot session.
- The information presented here is entirely MP related.
Information regarding the number of caches and their sizes, frequency of operation,
slot numbers is all considered platform-related information and is not provided
by this service.
@param[in] This A pointer to the EFI_MP_SERVICES_PROTOCOL
instance.
@param[in] ProcessorNumber The handle number of processor.
@param[out] ProcessorInfoBuffer A pointer to the buffer where information for
the requested processor is deposited.
@retval EFI_SUCCESS Processor information was returned.
@retval EFI_DEVICE_ERROR The calling processor is an AP.
@retval EFI_INVALID_PARAMETER ProcessorInfoBuffer is NULL.
@retval EFI_NOT_FOUND The processor with the handle specified by
ProcessorNumber does not exist in the platform.
**/
EFI_STATUS
EFIAPI
GetProcessorInfo (
IN EFI_MP_SERVICES_PROTOCOL *This,
IN UINTN ProcessorNumber,
OUT EFI_PROCESSOR_INFORMATION *ProcessorInfoBuffer
)
{
if (ProcessorInfoBuffer == NULL) {
return EFI_INVALID_PARAMETER;
}
if (!IsBSP ()) {
return EFI_DEVICE_ERROR;
}
if (ProcessorNumber >= mMpSystemData.NumberOfProcessors) {
return EFI_NOT_FOUND;
}
CopyMem (ProcessorInfoBuffer, &mMpSystemData.CpuDatas[ProcessorNumber], sizeof (EFI_PROCESSOR_INFORMATION));
return EFI_SUCCESS;
}
/**
This service executes a caller provided function on all enabled APs. APs can
run either simultaneously or one at a time in sequence. This service supports
both blocking and non-blocking requests. The non-blocking requests use EFI
events so the BSP can detect when the APs have finished. This service may only
be called from the BSP.
This function is used to dispatch all the enabled APs to the function specified
by Procedure. If any enabled AP is busy, then EFI_NOT_READY is returned
immediately and Procedure is not started on any AP.
If SingleThread is TRUE, all the enabled APs execute the function specified by
Procedure one by one, in ascending order of processor handle number. Otherwise,
all the enabled APs execute the function specified by Procedure simultaneously.
If WaitEvent is NULL, execution is in blocking mode. The BSP waits until all
APs finish or TimeoutInMicroseconds expires. Otherwise, execution is in non-blocking
mode, and the BSP returns from this service without waiting for APs. If a
non-blocking mode is requested after the UEFI Event EFI_EVENT_GROUP_READY_TO_BOOT
is signaled, then EFI_UNSUPPORTED must be returned.
If the timeout specified by TimeoutInMicroseconds expires before all APs return
from Procedure, then Procedure on the failed APs is terminated. All enabled APs
are always available for further calls to EFI_MP_SERVICES_PROTOCOL.StartupAllAPs()
and EFI_MP_SERVICES_PROTOCOL.StartupThisAP(). If FailedCpuList is not NULL, its
content points to the list of processor handle numbers in which Procedure was
terminated.
Note: It is the responsibility of the consumer of the EFI_MP_SERVICES_PROTOCOL.StartupAllAPs()
to make sure that the nature of the code that is executed on the BSP and the
dispatched APs is well controlled. The MP Services Protocol does not guarantee
that the Procedure function is MP-safe. Hence, the tasks that can be run in
parallel are limited to certain independent tasks and well-controlled exclusive
code. EFI services and protocols may not be called by APs unless otherwise
specified.
In blocking execution mode, BSP waits until all APs finish or
TimeoutInMicroseconds expires.
In non-blocking execution mode, BSP is freed to return to the caller and then
proceed to the next task without having to wait for APs. The following
sequence needs to occur in a non-blocking execution mode:
-# The caller that intends to use this MP Services Protocol in non-blocking
mode creates WaitEvent by calling the EFI CreateEvent() service. The caller
invokes EFI_MP_SERVICES_PROTOCOL.StartupAllAPs(). If the parameter WaitEvent
is not NULL, then StartupAllAPs() executes in non-blocking mode. It requests
the function specified by Procedure to be started on all the enabled APs,
and releases the BSP to continue with other tasks.
-# The caller can use the CheckEvent() and WaitForEvent() services to check
the state of the WaitEvent created in step 1.
-# When the APs complete their task or TimeoutInMicroSecondss expires, the MP
Service signals WaitEvent by calling the EFI SignalEvent() function. If
FailedCpuList is not NULL, its content is available when WaitEvent is
signaled. If all APs returned from Procedure prior to the timeout, then
FailedCpuList is set to NULL. If not all APs return from Procedure before
the timeout, then FailedCpuList is filled in with the list of the failed
APs. The buffer is allocated by MP Service Protocol using AllocatePool().
It is the caller's responsibility to free the buffer with FreePool() service.
-# This invocation of SignalEvent() function informs the caller that invoked
EFI_MP_SERVICES_PROTOCOL.StartupAllAPs() that either all the APs completed
the specified task or a timeout occurred. The contents of FailedCpuList
can be examined to determine which APs did not complete the specified task
prior to the timeout.
@param[in] This A pointer to the EFI_MP_SERVICES_PROTOCOL
instance.
@param[in] Procedure A pointer to the function to be run on
enabled APs of the system. See type
EFI_AP_PROCEDURE.
@param[in] SingleThread If TRUE, then all the enabled APs execute
the function specified by Procedure one by
one, in ascending order of processor handle
number. If FALSE, then all the enabled APs
execute the function specified by Procedure
simultaneously.
@param[in] WaitEvent The event created by the caller with CreateEvent()
service. If it is NULL, then execute in
blocking mode. BSP waits until all APs finish
or TimeoutInMicroseconds expires. If it's
not NULL, then execute in non-blocking mode.
BSP requests the function specified by
Procedure to be started on all the enabled
APs, and go on executing immediately. If
all return from Procedure, or TimeoutInMicroseconds
expires, this event is signaled. The BSP
can use the CheckEvent() or WaitForEvent()
services to check the state of event. Type
EFI_EVENT is defined in CreateEvent() in
the Unified Extensible Firmware Interface
Specification.
@param[in] TimeoutInMicroseconds Indicates the time limit in microseconds for
APs to return from Procedure, either for
blocking or non-blocking mode. Zero means
infinity. If the timeout expires before
all APs return from Procedure, then Procedure
on the failed APs is terminated. All enabled
APs are available for next function assigned
by EFI_MP_SERVICES_PROTOCOL.StartupAllAPs()
or EFI_MP_SERVICES_PROTOCOL.StartupThisAP().
If the timeout expires in blocking mode,
BSP returns EFI_TIMEOUT. If the timeout
expires in non-blocking mode, WaitEvent
is signaled with SignalEvent().
@param[in] ProcedureArgument The parameter passed into Procedure for
all APs.
@param[out] FailedCpuList If NULL, this parameter is ignored. Otherwise,
if all APs finish successfully, then its
content is set to NULL. If not all APs
finish before timeout expires, then its
content is set to address of the buffer
holding handle numbers of the failed APs.
The buffer is allocated by MP Service Protocol,
and it's the caller's responsibility to
free the buffer with FreePool() service.
In blocking mode, it is ready for consumption
when the call returns. In non-blocking mode,
it is ready when WaitEvent is signaled. The
list of failed CPU is terminated by
END_OF_CPU_LIST.
@retval EFI_SUCCESS In blocking mode, all APs have finished before
the timeout expired.
@retval EFI_SUCCESS In non-blocking mode, function has been dispatched
to all enabled APs.
@retval EFI_UNSUPPORTED A non-blocking mode request was made after the
UEFI event EFI_EVENT_GROUP_READY_TO_BOOT was
signaled.
@retval EFI_DEVICE_ERROR Caller processor is AP.
@retval EFI_NOT_STARTED No enabled APs exist in the system.
@retval EFI_NOT_READY Any enabled APs are busy.
@retval EFI_TIMEOUT In blocking mode, the timeout expired before
all enabled APs have finished.
@retval EFI_INVALID_PARAMETER Procedure is NULL.
**/
EFI_STATUS
EFIAPI
StartupAllAPs (
IN EFI_MP_SERVICES_PROTOCOL *This,
IN EFI_AP_PROCEDURE Procedure,
IN BOOLEAN SingleThread,
IN EFI_EVENT WaitEvent OPTIONAL,
IN UINTN TimeoutInMicroseconds,
IN VOID *ProcedureArgument OPTIONAL,
OUT UINTN **FailedCpuList OPTIONAL
)
{
EFI_STATUS Status;
CPU_DATA_BLOCK *CpuData;
UINTN Number;
CPU_STATE APInitialState;
CPU_STATE CpuState;
CpuData = NULL;
if (FailedCpuList != NULL) {
*FailedCpuList = NULL;
}
if (!IsBSP ()) {
return EFI_DEVICE_ERROR;
}
if (mMpSystemData.NumberOfProcessors == 1) {
return EFI_NOT_STARTED;
}
if (Procedure == NULL) {
return EFI_INVALID_PARAMETER;
}
//
// temporarily stop checkAllAPsStatus for avoid resource dead-lock.
//
mStopCheckAllAPsStatus = TRUE;
for (Number = 0; Number < mMpSystemData.NumberOfProcessors; Number++) {
CpuData = &mMpSystemData.CpuDatas[Number];
if (TestCpuStatusFlag (CpuData, PROCESSOR_AS_BSP_BIT)) {
//
// Skip BSP
//
continue;
}
if (!TestCpuStatusFlag (CpuData, PROCESSOR_ENABLED_BIT)) {
//
// Skip Disabled processors
//
continue;
}
CpuState = GetApState (CpuData);
if (CpuState != CpuStateIdle &&
CpuState != CpuStateSleeping) {
return EFI_NOT_READY;
}
}
mMpSystemData.Procedure = Procedure;
mMpSystemData.ProcedureArgument = ProcedureArgument;
mMpSystemData.WaitEvent = WaitEvent;
mMpSystemData.Timeout = TimeoutInMicroseconds;
mMpSystemData.TimeoutActive = (BOOLEAN) (TimeoutInMicroseconds != 0);
mMpSystemData.FinishCount = 0;
mMpSystemData.StartCount = 0;
mMpSystemData.SingleThread = SingleThread;
mMpSystemData.FailedList = FailedCpuList;
mMpSystemData.FailedListIndex = 0;
APInitialState = CpuStateReady;
for (Number = 0; Number < mMpSystemData.NumberOfProcessors; Number++) {
CpuData = &mMpSystemData.CpuDatas[Number];
if (TestCpuStatusFlag (CpuData, PROCESSOR_AS_BSP_BIT)) {
//
// Skip BSP
//
continue;
}
if (!TestCpuStatusFlag (CpuData, PROCESSOR_ENABLED_BIT)) {
//
// Skip Disabled processors
//
continue;
}
//
// Get APs prepared, and put failing APs into FailedCpuList
// if "SingleThread", only 1 AP will put to ready state, other AP will be put to ready
// state 1 by 1, until the previous 1 finished its task
// if not "SingleThread", all APs are put to ready state from the beginning
//
CpuState = GetApState (CpuData);
if (CpuState == CpuStateIdle ||
CpuState == CpuStateSleeping) {
mMpSystemData.StartCount++;
SetApState (CpuData, APInitialState);
if (APInitialState == CpuStateReady) {
SetApProcedure (CpuData, Procedure, ProcedureArgument);
//
// If this AP previous state is Sleeping, we should
// wake up this AP by sent a SIPI. and avoid
// re-involve the sleeping state. we must call
// SetApProcedure() first.
//
if (CpuState == CpuStateSleeping) {
ResetProcessorToIdleState (CpuData);
}
}
if (SingleThread) {
APInitialState = CpuStateBlocked;
}
}
}
mStopCheckAllAPsStatus = FALSE;
if (WaitEvent != NULL) {
//
// non blocking
//
return EFI_SUCCESS;
}
//
// Blocking temporarily stop CheckAllAPsStatus()
//
mStopCheckAllAPsStatus = TRUE;
while (TRUE) {
CheckAndUpdateAllAPsToIdleState ();
if (mMpSystemData.FinishCount == mMpSystemData.StartCount) {
Status = EFI_SUCCESS;
goto Done;
}
//
// task timeout
//
if (mMpSystemData.TimeoutActive && mMpSystemData.Timeout < 0) {
ResetAllFailedAPs();
Status = EFI_TIMEOUT;
goto Done;
}
gBS->Stall (gPollInterval);
mMpSystemData.Timeout -= gPollInterval;
}
Done:
return Status;
}
/**
This service lets the caller get one enabled AP to execute a caller-provided
function. The caller can request the BSP to either wait for the completion
of the AP or just proceed with the next task by using the EFI event mechanism.
See EFI_MP_SERVICES_PROTOCOL.StartupAllAPs() for more details on non-blocking
execution support. This service may only be called from the BSP.
This function is used to dispatch one enabled AP to the function specified by
Procedure passing in the argument specified by ProcedureArgument. If WaitEvent
is NULL, execution is in blocking mode. The BSP waits until the AP finishes or
TimeoutInMicroSecondss expires. Otherwise, execution is in non-blocking mode.
BSP proceeds to the next task without waiting for the AP. If a non-blocking mode
is requested after the UEFI Event EFI_EVENT_GROUP_READY_TO_BOOT is signaled,
then EFI_UNSUPPORTED must be returned.
If the timeout specified by TimeoutInMicroseconds expires before the AP returns
from Procedure, then execution of Procedure by the AP is terminated. The AP is
available for subsequent calls to EFI_MP_SERVICES_PROTOCOL.StartupAllAPs() and
EFI_MP_SERVICES_PROTOCOL.StartupThisAP().
@param[in] This A pointer to the EFI_MP_SERVICES_PROTOCOL
instance.
@param[in] Procedure A pointer to the function to be run on
enabled APs of the system. See type
EFI_AP_PROCEDURE.
@param[in] ProcessorNumber The handle number of the AP. The range is
from 0 to the total number of logical
processors minus 1. The total number of
logical processors can be retrieved by
EFI_MP_SERVICES_PROTOCOL.GetNumberOfProcessors().
@param[in] WaitEvent The event created by the caller with CreateEvent()
service. If it is NULL, then execute in
blocking mode. BSP waits until all APs finish
or TimeoutInMicroseconds expires. If it's
not NULL, then execute in non-blocking mode.
BSP requests the function specified by
Procedure to be started on all the enabled
APs, and go on executing immediately. If
all return from Procedure or TimeoutInMicroseconds
expires, this event is signaled. The BSP
can use the CheckEvent() or WaitForEvent()
services to check the state of event. Type
EFI_EVENT is defined in CreateEvent() in
the Unified Extensible Firmware Interface
Specification.
@param[in] TimeoutInMicroseconds Indicates the time limit in microseconds for
APs to return from Procedure, either for
blocking or non-blocking mode. Zero means
infinity. If the timeout expires before
all APs return from Procedure, then Procedure
on the failed APs is terminated. All enabled
APs are available for next function assigned
by EFI_MP_SERVICES_PROTOCOL.StartupAllAPs()
or EFI_MP_SERVICES_PROTOCOL.StartupThisAP().
If the timeout expires in blocking mode,
BSP returns EFI_TIMEOUT. If the timeout
expires in non-blocking mode, WaitEvent
is signaled with SignalEvent().
@param[in] ProcedureArgument The parameter passed into Procedure for
all APs.
@param[out] Finished If NULL, this parameter is ignored. In
blocking mode, this parameter is ignored.
In non-blocking mode, if AP returns from
Procedure before the timeout expires, its
content is set to TRUE. Otherwise, the
value is set to FALSE. The caller can
determine if the AP returned from Procedure
by evaluating this value.
@retval EFI_SUCCESS In blocking mode, specified AP finished before
the timeout expires.
@retval EFI_SUCCESS In non-blocking mode, the function has been
dispatched to specified AP.
@retval EFI_UNSUPPORTED A non-blocking mode request was made after the
UEFI event EFI_EVENT_GROUP_READY_TO_BOOT was
signaled.
@retval EFI_DEVICE_ERROR The calling processor is an AP.
@retval EFI_TIMEOUT In blocking mode, the timeout expired before
the specified AP has finished.
@retval EFI_NOT_READY The specified AP is busy.
@retval EFI_NOT_FOUND The processor with the handle specified by
ProcessorNumber does not exist.
@retval EFI_INVALID_PARAMETER ProcessorNumber specifies the BSP or disabled AP.
@retval EFI_INVALID_PARAMETER Procedure is NULL.
**/
EFI_STATUS
EFIAPI
StartupThisAP (
IN EFI_MP_SERVICES_PROTOCOL *This,
IN EFI_AP_PROCEDURE Procedure,
IN UINTN ProcessorNumber,
IN EFI_EVENT WaitEvent OPTIONAL,
IN UINTN TimeoutInMicroseconds,
IN VOID *ProcedureArgument OPTIONAL,
OUT BOOLEAN *Finished OPTIONAL
)
{
CPU_DATA_BLOCK *CpuData;
CPU_STATE CpuState;
CpuData = NULL;
if (Finished != NULL) {
*Finished = FALSE;
}
if (!IsBSP ()) {
return EFI_DEVICE_ERROR;
}
if (Procedure == NULL) {
return EFI_INVALID_PARAMETER;
}
if (ProcessorNumber >= mMpSystemData.NumberOfProcessors) {
return EFI_NOT_FOUND;
}
//
// temporarily stop checkAllAPsStatus for avoid resource dead-lock.
//
mStopCheckAllAPsStatus = TRUE;
CpuData = &mMpSystemData.CpuDatas[ProcessorNumber];
if (TestCpuStatusFlag (CpuData, PROCESSOR_AS_BSP_BIT) ||
!TestCpuStatusFlag (CpuData, PROCESSOR_ENABLED_BIT)) {
return EFI_INVALID_PARAMETER;
}
CpuState = GetApState (CpuData);
if (CpuState != CpuStateIdle &&
CpuState != CpuStateSleeping) {
return EFI_NOT_READY;
}
SetApState (CpuData, CpuStateReady);
SetApProcedure (CpuData, Procedure, ProcedureArgument);
//
// If this AP previous state is Sleeping, we should
// wake up this AP by sent a SIPI. and avoid
// re-involve the sleeping state. we must call
// SetApProcedure() first.
//
if (CpuState == CpuStateSleeping) {
ResetProcessorToIdleState (CpuData);
}
CpuData->Timeout = TimeoutInMicroseconds;
CpuData->WaitEvent = WaitEvent;
CpuData->TimeoutActive = (BOOLEAN) (TimeoutInMicroseconds != 0);
CpuData->Finished = Finished;
mStopCheckAllAPsStatus = FALSE;
if (WaitEvent != NULL) {
//
// Non Blocking
//
return EFI_SUCCESS;
}
//
// Blocking
//
while (TRUE) {
if (GetApState (CpuData) == CpuStateFinished) {
SetApState (CpuData, CpuStateIdle);
break;
}
if (CpuData->TimeoutActive && CpuData->Timeout < 0) {
ResetProcessorToIdleState (CpuData);
return EFI_TIMEOUT;
}
gBS->Stall (gPollInterval);
CpuData->Timeout -= gPollInterval;
}
return EFI_SUCCESS;
}
/**
This service switches the requested AP to be the BSP from that point onward.
This service changes the BSP for all purposes. This call can only be performed
by the current BSP.
This service switches the requested AP to be the BSP from that point onward.
This service changes the BSP for all purposes. The new BSP can take over the
execution of the old BSP and continue seamlessly from where the old one left
off. This service may not be supported after the UEFI Event EFI_EVENT_GROUP_READY_TO_BOOT
is signaled.
If the BSP cannot be switched prior to the return from this service, then
EFI_UNSUPPORTED must be returned.
@param[in] This A pointer to the EFI_MP_SERVICES_PROTOCOL instance.
@param[in] ProcessorNumber The handle number of AP that is to become the new
BSP. The range is from 0 to the total number of
logical processors minus 1. The total number of
logical processors can be retrieved by
EFI_MP_SERVICES_PROTOCOL.GetNumberOfProcessors().
@param[in] EnableOldBSP If TRUE, then the old BSP will be listed as an
enabled AP. Otherwise, it will be disabled.
@retval EFI_SUCCESS BSP successfully switched.
@retval EFI_UNSUPPORTED Switching the BSP cannot be completed prior to
this service returning.
@retval EFI_UNSUPPORTED Switching the BSP is not supported.
@retval EFI_SUCCESS The calling processor is an AP.
@retval EFI_NOT_FOUND The processor with the handle specified by
ProcessorNumber does not exist.
@retval EFI_INVALID_PARAMETER ProcessorNumber specifies the current BSP or
a disabled AP.
@retval EFI_NOT_READY The specified AP is busy.
**/
EFI_STATUS
EFIAPI
SwitchBSP (
IN EFI_MP_SERVICES_PROTOCOL *This,
IN UINTN ProcessorNumber,
IN BOOLEAN EnableOldBSP
)
{
//
// Current always return unsupported.
//
return EFI_UNSUPPORTED;
}
/**
This service lets the caller enable or disable an AP from this point onward.
This service may only be called from the BSP.
This service allows the caller enable or disable an AP from this point onward.
The caller can optionally specify the health status of the AP by Health. If
an AP is being disabled, then the state of the disabled AP is implementation
dependent. If an AP is enabled, then the implementation must guarantee that a
complete initialization sequence is performed on the AP, so the AP is in a state
that is compatible with an MP operating system. This service may not be supported
after the UEFI Event EFI_EVENT_GROUP_READY_TO_BOOT is signaled.
If the enable or disable AP operation cannot be completed prior to the return
from this service, then EFI_UNSUPPORTED must be returned.
@param[in] This A pointer to the EFI_MP_SERVICES_PROTOCOL instance.
@param[in] ProcessorNumber The handle number of AP that is to become the new
BSP. The range is from 0 to the total number of
logical processors minus 1. The total number of
logical processors can be retrieved by
EFI_MP_SERVICES_PROTOCOL.GetNumberOfProcessors().
@param[in] EnableAP Specifies the new state for the processor for
enabled, FALSE for disabled.
@param[in] HealthFlag If not NULL, a pointer to a value that specifies
the new health status of the AP. This flag
corresponds to StatusFlag defined in
EFI_MP_SERVICES_PROTOCOL.GetProcessorInfo(). Only
the PROCESSOR_HEALTH_STATUS_BIT is used. All other
bits are ignored. If it is NULL, this parameter
is ignored.
@retval EFI_SUCCESS The specified AP was enabled or disabled successfully.
@retval EFI_UNSUPPORTED Enabling or disabling an AP cannot be completed
prior to this service returning.
@retval EFI_UNSUPPORTED Enabling or disabling an AP is not supported.
@retval EFI_DEVICE_ERROR The calling processor is an AP.
@retval EFI_NOT_FOUND Processor with the handle specified by ProcessorNumber
does not exist.
@retval EFI_INVALID_PARAMETER ProcessorNumber specifies the BSP.
**/
EFI_STATUS
EFIAPI
EnableDisableAP (
IN EFI_MP_SERVICES_PROTOCOL *This,
IN UINTN ProcessorNumber,
IN BOOLEAN EnableAP,
IN UINT32 *HealthFlag OPTIONAL
)
{
CPU_DATA_BLOCK *CpuData;
BOOLEAN TempStopCheckState;
CPU_STATE CpuState;
CpuData = NULL;
TempStopCheckState = FALSE;
if (!IsBSP ()) {
return EFI_DEVICE_ERROR;
}
if (ProcessorNumber >= mMpSystemData.NumberOfProcessors) {
return EFI_NOT_FOUND;
}
//
// temporarily stop checkAllAPsStatus for initialize parameters.
//
if (!mStopCheckAllAPsStatus) {
mStopCheckAllAPsStatus = TRUE;
TempStopCheckState = TRUE;
}
CpuData = &mMpSystemData.CpuDatas[ProcessorNumber];
if (TestCpuStatusFlag (CpuData, PROCESSOR_AS_BSP_BIT)) {
return EFI_INVALID_PARAMETER;
}
CpuState = GetApState (CpuData);
if (CpuState != CpuStateIdle &&
CpuState != CpuStateSleeping) {
return EFI_UNSUPPORTED;
}
if (EnableAP) {
if (!(TestCpuStatusFlag (CpuData, PROCESSOR_ENABLED_BIT))) {
mMpSystemData.NumberOfEnabledProcessors++;
}
CpuStatusFlagOr (CpuData, PROCESSOR_ENABLED_BIT);
} else {
if (TestCpuStatusFlag (CpuData, PROCESSOR_ENABLED_BIT)) {
mMpSystemData.NumberOfEnabledProcessors--;
}
CpuStatusFlagAndNot (CpuData, PROCESSOR_ENABLED_BIT);
}
if (HealthFlag != NULL) {
CpuStatusFlagAndNot (CpuData, (UINT32)~PROCESSOR_HEALTH_STATUS_BIT);
CpuStatusFlagOr (CpuData, (*HealthFlag & PROCESSOR_HEALTH_STATUS_BIT));
}
if (TempStopCheckState) {
mStopCheckAllAPsStatus = FALSE;
}
return EFI_SUCCESS;
}
/**
This return the handle number for the calling processor. This service may be
called from the BSP and APs.
This service returns the processor handle number for the calling processor.
The returned value is in the range from 0 to the total number of logical
processors minus 1. The total number of logical processors can be retrieved
with EFI_MP_SERVICES_PROTOCOL.GetNumberOfProcessors(). This service may be
called from the BSP and APs. If ProcessorNumber is NULL, then EFI_INVALID_PARAMETER
is returned. Otherwise, the current processors handle number is returned in
ProcessorNumber, and EFI_SUCCESS is returned.
@param[in] This A pointer to the EFI_MP_SERVICES_PROTOCOL instance.
@param[out] ProcessorNumber The handle number of AP that is to become the new
BSP. The range is from 0 to the total number of
logical processors minus 1. The total number of
logical processors can be retrieved by
EFI_MP_SERVICES_PROTOCOL.GetNumberOfProcessors().
@retval EFI_SUCCESS The current processor handle number was returned
in ProcessorNumber.
@retval EFI_INVALID_PARAMETER ProcessorNumber is NULL.
**/
EFI_STATUS
EFIAPI
WhoAmI (
IN EFI_MP_SERVICES_PROTOCOL *This,
OUT UINTN *ProcessorNumber
)
{
UINTN Index;
UINT32 ProcessorId;
if (ProcessorNumber == NULL) {
return EFI_INVALID_PARAMETER;
}
ProcessorId = GetApicId ();
for (Index = 0; Index < mMpSystemData.NumberOfProcessors; Index++) {
if (mMpSystemData.CpuDatas[Index].Info.ProcessorId == ProcessorId) {
break;
}
}
*ProcessorNumber = Index;
return EFI_SUCCESS;
}
/**
Terminate AP's task and set it to idle state.
This function terminates AP's task due to timeout by sending INIT-SIPI,
and sends it to idle state.
@param CpuData the pointer to CPU_DATA_BLOCK of specified AP
**/
VOID
ResetProcessorToIdleState (
IN CPU_DATA_BLOCK *CpuData
)
{
ResetApStackless ((UINT32)CpuData->Info.ProcessorId);
}
/**
Application Processors do loop routine
after switch to its own stack.
@param Context1 A pointer to the context to pass into the function.
@param Context2 A pointer to the context to pass into the function.
**/
VOID
ProcessorToIdleState (
IN VOID *Context1, OPTIONAL
IN VOID *Context2 OPTIONAL
)
{
UINTN ProcessorNumber;
CPU_DATA_BLOCK *CpuData;
EFI_AP_PROCEDURE Procedure;
volatile VOID *ProcedureArgument;
AsmApDoneWithCommonStack ();
while (!mAPsAlreadyInitFinished) {
CpuPause ();
}
WhoAmI (&mMpServicesTemplate, &ProcessorNumber);
CpuData = &mMpSystemData.CpuDatas[ProcessorNumber];
//
// Avoid forcibly reset AP caused the AP got lock not release.
//
if (CpuData->LockSelf == (INTN) GetApicId ()) {
ReleaseSpinLock (&CpuData->CpuDataLock);
}
//
// Avoid forcibly reset AP caused the timeout AP State is not
// updated.
//
GetMpSpinLock (CpuData);
if (CpuData->State == CpuStateBusy) {
CpuData->Procedure = NULL;
}
CpuData->State = CpuStateIdle;
ReleaseMpSpinLock (CpuData);
while (TRUE) {
GetMpSpinLock (CpuData);
ProcedureArgument = CpuData->Parameter;
Procedure = CpuData->Procedure;
ReleaseMpSpinLock (CpuData);
if (Procedure != NULL) {
SetApState (CpuData, CpuStateBusy);
Procedure ((VOID*) ProcedureArgument);
GetMpSpinLock (CpuData);
CpuData->Procedure = NULL;
CpuData->State = CpuStateFinished;
ReleaseMpSpinLock (CpuData);
} else {
//
// if no procedure to execution, we simply put AP
// into sleeping state, and waiting BSP sent SIPI.
//
GetMpSpinLock (CpuData);
if (CpuData->State == CpuStateIdle) {
CpuData->State = CpuStateSleeping;
}
ReleaseMpSpinLock (CpuData);
}
if (GetApState (CpuData) == CpuStateSleeping) {
CpuSleep ();
}
CpuPause ();
}
CpuSleep ();
CpuDeadLoop ();
}
/**
Checks AP' status periodically.
This function is triggerred by timer perodically to check the
state of AP forStartupThisAP() executed in non-blocking mode.
@param Event Event triggered.
@param Context Parameter passed with the event.
**/
VOID
EFIAPI
CheckThisAPStatus (
IN EFI_EVENT Event,
IN VOID *Context
)
{
CPU_DATA_BLOCK *CpuData;
CPU_STATE CpuState;
CpuData = (CPU_DATA_BLOCK *) Context;
if (CpuData->TimeoutActive) {
CpuData->Timeout -= gPollInterval;
}
CpuState = GetApState (CpuData);
if (CpuState == CpuStateFinished) {
if (CpuData->Finished) {
*CpuData->Finished = TRUE;
}
SetApState (CpuData, CpuStateIdle);
goto out;
}
if (CpuData->TimeoutActive && CpuData->Timeout < 0) {
if (CpuState != CpuStateIdle &&
CpuData->Finished) {
*CpuData->Finished = FALSE;
}
ResetProcessorToIdleState (CpuData);
goto out;
}
return;
out:
CpuData->TimeoutActive = FALSE;
gBS->SignalEvent (CpuData->WaitEvent);
CpuData->WaitEvent = NULL;
}
/**
Checks APs' status periodically.
This function is triggerred by timer perodically to check the
state of APs for StartupAllAPs() executed in non-blocking mode.
@param Event Event triggered.
@param Context Parameter passed with the event.
**/
VOID
EFIAPI
CheckAllAPsStatus (
IN EFI_EVENT Event,
IN VOID *Context
)
{
CPU_DATA_BLOCK *CpuData;
UINTN Number;
EFI_STATUS Status;
if (mMpSystemData.TimeoutActive) {
mMpSystemData.Timeout -= gPollInterval;
}
if (mStopCheckAllAPsStatus) {
return;
}
//
// avoid next timer enter.
//
Status = gBS->SetTimer (
mMpSystemData.CheckAllAPsEvent,
TimerCancel,
0
);
ASSERT_EFI_ERROR (Status);
if (mMpSystemData.WaitEvent != NULL) {
CheckAndUpdateAllAPsToIdleState ();
//
// task timeout
//
if (mMpSystemData.TimeoutActive && mMpSystemData.Timeout < 0) {
ResetAllFailedAPs();
//
// force exit
//
mMpSystemData.FinishCount = mMpSystemData.StartCount;
}
if (mMpSystemData.FinishCount != mMpSystemData.StartCount) {
goto EXIT;
}
mMpSystemData.TimeoutActive = FALSE;
gBS->SignalEvent (mMpSystemData.WaitEvent);
mMpSystemData.WaitEvent = NULL;
mStopCheckAllAPsStatus = TRUE;
goto EXIT;
}
//
// check each AP status for StartupThisAP
//
for (Number = 0; Number < mMpSystemData.NumberOfProcessors; Number++) {
CpuData = &mMpSystemData.CpuDatas[Number];
if (CpuData->WaitEvent) {
CheckThisAPStatus (NULL, (VOID *)CpuData);
}
}
EXIT:
Status = gBS->SetTimer (
mMpSystemData.CheckAllAPsEvent,
TimerPeriodic,
EFI_TIMER_PERIOD_MICROSECONDS (100)
);
ASSERT_EFI_ERROR (Status);
}
/**
Application Processor C code entry point.
**/
VOID
EFIAPI
ApEntryPointInC (
VOID
)
{
VOID* TopOfApStack;
UINTN ProcessorNumber;
if (!mAPsAlreadyInitFinished) {
FillInProcessorInformation (FALSE, mMpSystemData.NumberOfProcessors);
TopOfApStack = (UINT8*)mApStackStart + gApStackSize;
mApStackStart = TopOfApStack;
//
// Store the Stack address, when reset the AP, We can found the original address.
//
mMpSystemData.CpuDatas[mMpSystemData.NumberOfProcessors].TopOfStack = TopOfApStack;
mMpSystemData.NumberOfProcessors++;
mMpSystemData.NumberOfEnabledProcessors++;
} else {
WhoAmI (&mMpServicesTemplate, &ProcessorNumber);
//
// Get the original stack address.
//
TopOfApStack = mMpSystemData.CpuDatas[ProcessorNumber].TopOfStack;
}
SwitchStack (
(SWITCH_STACK_ENTRY_POINT)(UINTN)ProcessorToIdleState,
NULL,
NULL,
TopOfApStack);
}
/**
This function is called by all processors (both BSP and AP) once and collects MP related data.
@param Bsp TRUE if the CPU is BSP
@param ProcessorNumber The specific processor number
@retval EFI_SUCCESS Data for the processor collected and filled in
**/
EFI_STATUS
FillInProcessorInformation (
IN BOOLEAN Bsp,
IN UINTN ProcessorNumber
)
{
CPU_DATA_BLOCK *CpuData;
UINT32 ProcessorId;
CpuData = &mMpSystemData.CpuDatas[ProcessorNumber];
ProcessorId = GetApicId ();
CpuData->Info.ProcessorId = ProcessorId;
CpuData->Info.StatusFlag = PROCESSOR_ENABLED_BIT | PROCESSOR_HEALTH_STATUS_BIT;
if (Bsp) {
CpuData->Info.StatusFlag |= PROCESSOR_AS_BSP_BIT;
}
CpuData->Info.Location.Package = ProcessorId;
CpuData->Info.Location.Core = 0;
CpuData->Info.Location.Thread = 0;
CpuData->State = Bsp ? CpuStateBusy : CpuStateIdle;
CpuData->Procedure = NULL;
CpuData->Parameter = NULL;
InitializeSpinLock (&CpuData->CpuDataLock);
CpuData->LockSelf = -1;
return EFI_SUCCESS;
}
/**
Prepare the System Data.
@retval EFI_SUCCESS the System Data finished initilization.
**/
EFI_STATUS
InitMpSystemData (
VOID
)
{
EFI_STATUS Status;
ZeroMem (&mMpSystemData, sizeof (MP_SYSTEM_DATA));
mMpSystemData.NumberOfProcessors = 1;
mMpSystemData.NumberOfEnabledProcessors = 1;
mMpSystemData.CpuDatas = AllocateZeroPool (sizeof (CPU_DATA_BLOCK) * gMaxLogicalProcessorNumber);
ASSERT(mMpSystemData.CpuDatas != NULL);
Status = gBS->CreateEvent (
EVT_TIMER | EVT_NOTIFY_SIGNAL,
TPL_CALLBACK,
CheckAllAPsStatus,
NULL,
&mMpSystemData.CheckAllAPsEvent
);
ASSERT_EFI_ERROR (Status);
//
// Set timer to check all APs status.
//
Status = gBS->SetTimer (
mMpSystemData.CheckAllAPsEvent,
TimerPeriodic,
EFI_TIMER_PERIOD_MICROSECONDS (100)
);
ASSERT_EFI_ERROR (Status);
//
// BSP
//
FillInProcessorInformation (TRUE, 0);
return EFI_SUCCESS;
}
/**
Collects BIST data from HOB.
This function collects BIST data from HOB built from Sec Platform Information
PPI or SEC Platform Information2 PPI.
**/
VOID
CollectBistDataFromHob (
VOID
)
{
EFI_HOB_GUID_TYPE *GuidHob;
EFI_SEC_PLATFORM_INFORMATION_RECORD2 *SecPlatformInformation2;
EFI_SEC_PLATFORM_INFORMATION_RECORD *SecPlatformInformation;
UINTN NumberOfData;
EFI_SEC_PLATFORM_INFORMATION_CPU *CpuInstance;
EFI_SEC_PLATFORM_INFORMATION_CPU BspCpuInstance;
UINTN ProcessorNumber;
UINT32 InitialLocalApicId;
CPU_DATA_BLOCK *CpuData;
SecPlatformInformation2 = NULL;
SecPlatformInformation = NULL;
//
// Get gEfiSecPlatformInformation2PpiGuid Guided HOB firstly
//
GuidHob = GetFirstGuidHob (&gEfiSecPlatformInformation2PpiGuid);
if (GuidHob != NULL) {
//
// Sec Platform Information2 PPI includes BSP/APs' BIST information
//
SecPlatformInformation2 = GET_GUID_HOB_DATA (GuidHob);
NumberOfData = SecPlatformInformation2->NumberOfCpus;
CpuInstance = SecPlatformInformation2->CpuInstance;
} else {
//
// Otherwise, get gEfiSecPlatformInformationPpiGuid Guided HOB
//
GuidHob = GetFirstGuidHob (&gEfiSecPlatformInformationPpiGuid);
if (GuidHob != NULL) {
SecPlatformInformation = GET_GUID_HOB_DATA (GuidHob);
NumberOfData = 1;
//
// SEC Platform Information only includes BSP's BIST information
// does not have BSP's APIC ID
//
BspCpuInstance.CpuLocation = GetApicId ();
BspCpuInstance.InfoRecord.IA32HealthFlags.Uint32 = SecPlatformInformation->IA32HealthFlags.Uint32;
CpuInstance = &BspCpuInstance;
} else {
DEBUG ((EFI_D_INFO, "Does not find any HOB stored CPU BIST information!\n"));
//
// Does not find any HOB stored BIST information
//
return;
}
}
while ((NumberOfData--) > 0) {
for (ProcessorNumber = 0; ProcessorNumber < mMpSystemData.NumberOfProcessors; ProcessorNumber++) {
CpuData = &mMpSystemData.CpuDatas[ProcessorNumber];
InitialLocalApicId = (UINT32) CpuData->Info.ProcessorId;
if (InitialLocalApicId == CpuInstance[NumberOfData].CpuLocation) {
//
// Update CPU health status for MP Services Protocol according to BIST data.
//
if (CpuInstance[NumberOfData].InfoRecord.IA32HealthFlags.Uint32 != 0) {
CpuData->Info.StatusFlag &= ~PROCESSOR_HEALTH_STATUS_BIT;
//
// Report Status Code that self test is failed
//
REPORT_STATUS_CODE (
EFI_ERROR_CODE | EFI_ERROR_MAJOR,
(EFI_COMPUTING_UNIT_HOST_PROCESSOR | EFI_CU_HP_EC_SELF_TEST)
);
}
}
}
}
}
/**
Callback function for ExitBootServices.
@param Event Event whose notification function is being invoked.
@param Context The pointer to the notification function's context,
which is implementation-dependent.
**/
VOID
EFIAPI
ExitBootServicesCallback (
IN EFI_EVENT Event,
IN VOID *Context
)
{
//
// Avoid APs access invalid buff datas which allocated by BootServices,
// so we send INIT IPI to APs to let them wait for SIPI state.
//
SendInitIpiAllExcludingSelf ();
}
/**
Initialize Multi-processor support.
**/
VOID
InitializeMpSupport (
VOID
)
{
EFI_STATUS Status;
gMaxLogicalProcessorNumber = (UINTN) PcdGet32 (PcdCpuMaxLogicalProcessorNumber);
if (gMaxLogicalProcessorNumber < 1) {
DEBUG ((DEBUG_ERROR, "Setting PcdCpuMaxLogicalProcessorNumber should be more than zero.\n"));
return;
}
if (gMaxLogicalProcessorNumber == 1) {
return;
}
gApStackSize = (UINTN) PcdGet32 (PcdCpuApStackSize);
ASSERT ((gApStackSize & (SIZE_4KB - 1)) == 0);
mApStackStart = AllocatePages (EFI_SIZE_TO_PAGES (gMaxLogicalProcessorNumber * gApStackSize));
ASSERT (mApStackStart != NULL);
//
// the first buffer of stack size used for common stack, when the amount of AP
// more than 1, we should never free the common stack which maybe used for AP reset.
//
mCommonStack = mApStackStart;
mTopOfApCommonStack = (UINT8*) mApStackStart + gApStackSize;
mApStackStart = mTopOfApCommonStack;
InitMpSystemData ();
PrepareAPStartupCode ();
StartApsStackless ();
DEBUG ((DEBUG_INFO, "Detect CPU count: %d\n", mMpSystemData.NumberOfProcessors));
if (mMpSystemData.NumberOfProcessors == 1) {
FreeApStartupCode ();
FreePages (mCommonStack, EFI_SIZE_TO_PAGES (gMaxLogicalProcessorNumber * gApStackSize));
return;
}
mMpSystemData.CpuDatas = ReallocatePool (
sizeof (CPU_DATA_BLOCK) * gMaxLogicalProcessorNumber,
sizeof (CPU_DATA_BLOCK) * mMpSystemData.NumberOfProcessors,
mMpSystemData.CpuDatas);
mAPsAlreadyInitFinished = TRUE;
//
// Update CPU healthy information from Guided HOB
//
CollectBistDataFromHob ();
Status = gBS->InstallMultipleProtocolInterfaces (
&mMpServiceHandle,
&gEfiMpServiceProtocolGuid, &mMpServicesTemplate,
NULL
);
ASSERT_EFI_ERROR (Status);
if (mMpSystemData.NumberOfProcessors < gMaxLogicalProcessorNumber) {
FreePages (mApStackStart, EFI_SIZE_TO_PAGES (
(gMaxLogicalProcessorNumber - mMpSystemData.NumberOfProcessors) *
gApStackSize));
}
Status = gBS->CreateEvent (
EVT_SIGNAL_EXIT_BOOT_SERVICES,
TPL_CALLBACK,
ExitBootServicesCallback,
NULL,
&mExitBootServicesEvent
);
ASSERT_EFI_ERROR (Status);
}
Reference in New Issue View Git Blame Copy Permalink