audk/NetworkPkg/IpSecDxe/IpSecConfigImpl.h

956 lines
37 KiB
C

/** @file
Definitions related to IPSEC_CONFIG_PROTOCOL implementations.
Copyright (c) 2009 - 2011, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php.
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#ifndef _IPSEC_CONFIG_IMPL_H_
#define _IPSEC_CONFIG_IMPL_H_
#include <Protocol/IpSec.h>
#include <Protocol/IpSecConfig.h>
#include <Library/BaseLib.h>
#include <Library/BaseMemoryLib.h>
#include <Library/PrintLib.h>
#include <Library/MemoryAllocationLib.h>
#include <Library/UefiRuntimeServicesTableLib.h>
#include <Library/UefiBootServicesTableLib.h>
#include <Library/DebugLib.h>
#include "IpSecImpl.h"
#define EFI_IPSEC_ANY_PROTOCOL 0xFFFF
#define EFI_IPSEC_ANY_PORT 0
#define IPSEC_VAR_ITEM_HEADER_LOGO_BIT 0x80
#define IPSEC_VAR_ITEM_HEADER_CONTENT_BIT 0x7F
#define IPSECCONFIG_VARIABLE_NAME L"IpSecConfig"
#define IPSECCONFIG_STATUS_NAME L"IpSecStatus"
#define SIZE_OF_SPD_SELECTOR(x) (UINTN) (sizeof (EFI_IPSEC_SPD_SELECTOR) \
+ sizeof (EFI_IP_ADDRESS_INFO) * ((x)->LocalAddressCount + (x)->RemoteAddressCount))
#define FIX_REF_BUF_ADDR(addr, base) addr = (VOID *) ((UINTN) (addr) - (UINTN) (base))
#define UNFIX_REF_BUF_ADDR(addr, base) addr = (VOID *) ((UINTN) (addr) + (UINTN) (base))
//
// The data structure used to store the genernall information of IPsec configuration.
//
typedef struct {
UINT32 VariableCount; // the total number of the IPsecConfig variables.
UINT32 VariableSize; // The total size of all IpsecConfig variables.
UINT32 SingleVariableSize; // The max size of single variable
} IP_SEC_VARIABLE_INFO;
typedef struct {
EFI_IPSEC_CONFIG_SELECTOR *Selector;
VOID *Data;
LIST_ENTRY List;
} IPSEC_COMMON_POLICY_ENTRY;
typedef struct {
UINT8 *Ptr;
UINTN Size;
UINTN Capacity;
} IPSEC_VARIABLE_BUFFER;
#pragma pack(1)
typedef struct {
UINT8 Type;
UINT16 Size;
} IPSEC_VAR_ITEM_HEADER;
#pragma pack()
/**
The prototype of Copy Source Selector to the Destination Selector.
@param[in, out] DstSel Pointer of Destination Selector. It would be
SPD Selector, or SAD Selector or PAD Selector.
@param[in] SrcSel Pointer of Source Selector. It would be
SPD Selector, or SAD Selector or PAD Selector.
@param[in, out] Size The size of the Destination Selector. If it
is not NULL and its value is less than the size of
Source Selector, the value of Source Selector's
size will be passed to the caller by this parameter.
@retval EFI_INVALID_PARAMETER If the Destination or Source Selector is NULL.
@retval EFI_BUFFER_TOO_SMALL If the input Size is less than size of Source Selector.
@retval EFI_SUCCESS Copy Source Selector to the Destination
Selector successfully.
**/
typedef
EFI_STATUS
(*IPSEC_DUPLICATE_SELECTOR) (
IN OUT EFI_IPSEC_CONFIG_SELECTOR *DstSel,
IN EFI_IPSEC_CONFIG_SELECTOR *SrcSel,
IN OUT UINTN *Size
);
/**
It is prototype of compare two Selectors. The Selector would be SPD Selector,
or SAD Selector, or PAD selector.
@param[in] Selector1 Pointer of the first Selector.
@param[in] Selector2 Pointer of the second Selector.
@retval TRUE These two Selectors have the same value in certain fields.
@retval FALSE Not all fields have the same value in these two Selectors.
**/
typedef
BOOLEAN
(*IPSEC_COMPARE_SELECTOR) (
IN EFI_IPSEC_CONFIG_SELECTOR *Selector1,
IN EFI_IPSEC_CONFIG_SELECTOR *Selector2
);
/**
The prototype of a function to check if the Selector is Zero by its certain fields.
@param[in] Selector Pointer of the Selector.
@retval TRUE If the Selector is Zero.
@retval FALSE If the Selector is not Zero.
**/
typedef
BOOLEAN
(*IPSEC_IS_ZERO_SELECTOR) (
IN EFI_IPSEC_CONFIG_SELECTOR *Selector
);
/**
The prototype of a function to fix the value of particular members of the Selector.
@param[in] Selector Pointer of Selector.
@param[in] Data Pointer of Data.
**/
typedef
VOID
(*IPSEC_FIX_POLICY_ENTRY) (
IN EFI_IPSEC_CONFIG_SELECTOR *Selector,
IN VOID *Data
);
/**
It is prototype function to define a routine function by the caller of IpSecVisitConfigData().
@param[in] Type A specified IPSEC_CONFIG_DATA_TYPE.
@param[in] Selector Points to EFI_IPSEC_CONFIG_SELECTOR to be copied
to the buffer.
@param[in] Data Points to data to be copied to the buffer. The
Data type is related to the Type.
@param[in] SelectorSize The size of the Selector.
@param[in] DataSize The size of the Data.
@param[in, out] Buffer The buffer to store the Selector and Data.
@retval EFI_SUCCESS Copied the Selector and Data to a buffer successfully.
@retval EFI_OUT_OF_RESOURCES The required system resource could not be allocated.
**/
typedef
EFI_STATUS
(*IPSEC_COPY_POLICY_ENTRY) (
IN EFI_IPSEC_CONFIG_DATA_TYPE Type,
IN EFI_IPSEC_CONFIG_SELECTOR *Selector,
IN VOID *Data,
IN UINTN SelectorSize,
IN UINTN DataSize,
IN OUT VOID *Context
);
/**
Set the security policy information for the EFI IPsec driver.
The IPsec configuration data has a unique selector/identifier separately to
identify a data entry.
@param[in] Selector Pointer to an entry selector on operated
configuration data specified by DataType.
A NULL Selector causes the entire specified-type
configuration information to be flushed.
@param[in] Data The data buffer to be set.
@param[in] Context Pointer to one entry selector that describes
the expected position the new data entry will
be added. If Context is NULL, the new entry will
be appended to the end of the database.
@retval EFI_INVALID_PARAMETER Certain Parameters are not correct. The Parameter
requiring a check depends on the Selector type.
@retval EFI_OUT_OF_RESOURCED The required system resource could not be allocated.
@retval EFI_SUCCESS The specified configuration data was obtained successfully.
**/
typedef
EFI_STATUS
(*IPSEC_SET_POLICY_ENTRY) (
IN EFI_IPSEC_CONFIG_SELECTOR *Selector,
IN VOID *Data,
IN VOID *Context OPTIONAL
);
/**
A prototype function definition to lookup the data entry from IPsec. Return the configuration
value of the specified Entry.
@param[in] Selector Pointer to an entry selector that is an identifier
of the entry.
@param[in, out] DataSize On output, the size of data returned in Data.
@param[out] Data The buffer to return the contents of the IPsec
configuration data. The type of the data buffer
is associated with the DataType.
@retval EFI_SUCCESS The specified configuration data was obtained successfully.
@retval EFI_INVALID_PARAMETER Data is NULL and *DataSize is not zero.
@retval EFI_NOT_FOUND The configuration data specified by Selector is not found.
@retval EFI_BUFFER_TOO_SMALL The DataSize is too small for the result. DataSize has been
updated with the size needed to complete the request.
**/
typedef
EFI_STATUS
(*IPSEC_GET_POLICY_ENTRY) (
IN EFI_IPSEC_CONFIG_SELECTOR *Selector,
IN OUT UINTN *DataSize,
IN VOID *Data
);
/**
Compare two SPD Selectors.
Compare two SPD Selector by the fields of LocalAddressCount/RemoteAddressCount/
NextLayerProtocol/LocalPort/LocalPortRange/RemotePort/RemotePortRange and the
Local Addresses and remote Addresses.
@param[in] Selector1 Pointer of the first SPD Selector.
@param[in] Selector2 Pointer of the second SPD Selector.
@retval TRUE These two Selectors have the same value in above fields.
@retval FALSE Not all of the above fields have the same value in these two Selectors.
**/
BOOLEAN
CompareSpdSelector (
IN EFI_IPSEC_CONFIG_SELECTOR *Selector1,
IN EFI_IPSEC_CONFIG_SELECTOR *Selector2
);
/**
Visit all IPsec Configurations of specified Type and call the caller defined
interface.
@param[in] DataType The specified IPsec Config Data Type.
@param[in] Routine The function caller defined.
@param[in] Context The data passed to the Routine.
@retval EFI_OUT_OF_RESOURCES The required system resource could not be allocated.
@retval EFI_SUCCESS This function complete successfully.
**/
EFI_STATUS
IpSecVisitConfigData (
IN EFI_IPSEC_CONFIG_DATA_TYPE DataType,
IN IPSEC_COPY_POLICY_ENTRY Routine,
IN VOID *Context
);
/**
This function is the subfunction of the EFIIpSecConfigSetData.
This function call IpSecSetVaraible to set the IPsec Configuration into the firmware.
@retval EFI_OUT_OF_RESOURCES The required system resource could not be allocated.
@retval EFI_SUCCESS Saved the configration successfully.
@retval Others Other errors were found while obtaining the variable.
**/
EFI_STATUS
IpSecConfigSave (
VOID
);
/**
Initialize IPsecConfig protocol
@param[in, out] Private Pointer to IPSEC_PRIVATE_DATA. After this function finish,
the pointer of IPsecConfig Protocol implementation will copy
into its IPsecConfig member.
@retval EFI_SUCCESS Initialized the IPsecConfig Protocol successfully.
@retval Others Initializing the IPsecConfig Protocol failed.
**/
EFI_STATUS
IpSecConfigInitialize (
IN OUT IPSEC_PRIVATE_DATA *Private
);
/**
Calculate the entire size of EFI_IPSEC_SPD_DATA, which includes the buffer size pointed
by the pointer members.
@param[in] SpdData Pointer to a specified EFI_IPSEC_SPD_DATA.
@return The entire size of the specified EFI_IPSEC_SPD_DATA.
**/
UINTN
IpSecGetSizeOfEfiSpdData (
IN EFI_IPSEC_SPD_DATA *SpdData
);
/**
Calculate the a entire size of IPSEC_SPD_DATA, which includes the buffer size pointed
by the pointer members and the buffer size used by Sa List.
@param[in] SpdData Pointer to the specified IPSEC_SPD_DATA.
@return The entire size of IPSEC_SPD_DATA.
**/
UINTN
IpSecGetSizeOfSpdData (
IN IPSEC_SPD_DATA *SpdData
);
/**
Copy Source Process Policy to the Destination Process Policy.
@param[in] Dst Pointer to the Source Process Policy.
@param[in] Src Pointer to the Destination Process Policy.
**/
VOID
IpSecDuplicateProcessPolicy (
IN EFI_IPSEC_PROCESS_POLICY *Dst,
IN EFI_IPSEC_PROCESS_POLICY *Src
);
/**
Find if the two SPD Selectors has subordinative.
Compare two SPD Selector by the fields of LocalAddressCount/RemoteAddressCount/
NextLayerProtocol/LocalPort/LocalPortRange/RemotePort/RemotePortRange and the
Local Addresses and remote Addresses.
@param[in] Selector1 Pointer of first SPD Selector.
@param[in] Selector2 Pointer of second SPD Selector.
@retval TRUE The first SPD Selector is subordinate Selector of second SPD Selector.
@retval FALSE The first SPD Selector is not subordinate Selector of second
SPD Selector.
**/
BOOLEAN
IsSubSpdSelector (
IN EFI_IPSEC_CONFIG_SELECTOR *Selector1,
IN EFI_IPSEC_CONFIG_SELECTOR *Selector2
);
/**
Compare two SA IDs.
@param[in] Selector1 Pointer of the first SA ID.
@param[in] Selector2 Pointer of the second SA ID.
@retval TRUE This two Selectors have the same SA ID.
@retval FALSE This two Selecotrs don't have the same SA ID.
**/
BOOLEAN
CompareSaId (
IN EFI_IPSEC_CONFIG_SELECTOR *Selector1,
IN EFI_IPSEC_CONFIG_SELECTOR *Selector2
);
/**
Compare two PAD IDs.
@param[in] Selector1 Pointer of the first PAD ID.
@param[in] Selector2 Pointer of the second PAD ID.
@retval TRUE This two Selectors have the same PAD ID.
@retval FALSE This two Selecotrs don't have the same PAD ID.
**/
BOOLEAN
ComparePadId (
IN EFI_IPSEC_CONFIG_SELECTOR *Selector1,
IN EFI_IPSEC_CONFIG_SELECTOR *Selector2
);
/**
Check if the SPD Selector is Zero by its LocalAddressCount and RemoteAddressCount
fields.
@param[in] Selector Pointer of the SPD Selector.
@retval TRUE If the SPD Selector is Zero.
@retval FALSE If the SPD Selector is not Zero.
**/
BOOLEAN
IsZeroSpdSelector (
IN EFI_IPSEC_CONFIG_SELECTOR *Selector
);
/**
Check if the SA ID is Zero by its DestAddress.
@param[in] Selector Pointer of the SA ID.
@retval TRUE If the SA ID is Zero.
@retval FALSE If the SA ID is not Zero.
**/
BOOLEAN
IsZeroSaId (
IN EFI_IPSEC_CONFIG_SELECTOR *Selector
);
/**
Check if the PAD ID is Zero.
@param[in] Selector Pointer of the PAD ID.
@retval TRUE If the PAD ID is Zero.
@retval FALSE If the PAD ID is not Zero.
**/
BOOLEAN
IsZeroPadId (
IN EFI_IPSEC_CONFIG_SELECTOR *Selector
);
/**
Copy Source SPD Selector to the Destination SPD Selector.
@param[in, out] DstSel Pointer of Destination SPD Selector.
@param[in] SrcSel Pointer of Source SPD Selector.
@param[in, out] Size The size of the Destination SPD Selector. If
it is not NULL and its value is less than the
size of Source SPD Selector, the value of
Source SPD Selector's size will be passed to
the caller by this parameter.
@retval EFI_INVALID_PARAMETER If the Destination or Source SPD Selector is NULL.
@retval EFI_BUFFER_TOO_SMALL If the input Size is less than size of Source SPD Selector.
@retval EFI_SUCCESS Copy Source SPD Selector to the Destination SPD
Selector successfully.
**/
EFI_STATUS
DuplicateSpdSelector (
IN OUT EFI_IPSEC_CONFIG_SELECTOR *DstSel,
IN EFI_IPSEC_CONFIG_SELECTOR *SrcSel,
IN OUT UINTN *Size
);
/**
Copy Source SA ID to the Destination SA ID.
@param[in, out] DstSel Pointer of the Destination SA ID.
@param[in] SrcSel Pointer of the Source SA ID.
@param[in, out] Size The size of the Destination SA ID. If it
not NULL, and its value is less than the size of
Source SA ID, the value of Source SA ID's size
will be passed to the caller by this parameter.
@retval EFI_INVALID_PARAMETER If the Destination or Source SA ID is NULL.
@retval EFI_BUFFER_TOO_SMALL If the input Size less than size of source SA ID.
@retval EFI_SUCCESS Copied Source SA ID to the Destination SA ID successfully.
**/
EFI_STATUS
DuplicateSaId (
IN OUT EFI_IPSEC_CONFIG_SELECTOR *DstSel,
IN EFI_IPSEC_CONFIG_SELECTOR *SrcSel,
IN OUT UINTN *Size
);
/**
Copy Source PAD ID to the Destination PAD ID.
@param[in, out] DstSel Pointer of Destination PAD ID.
@param[in] SrcSel Pointer of Source PAD ID.
@param[in, out] Size The size of the Destination PAD ID. If it
not NULL, and its value less than the size of
Source PAD ID, the value of Source PAD ID's size
will be passed to the caller by this parameter.
@retval EFI_INVALID_PARAMETER If the Destination or Source PAD ID is NULL.
@retval EFI_BUFFER_TOO_SMALL If the input Size less than size of source PAD ID.
@retval EFI_SUCCESS Copied Source PAD ID to the Destination PAD ID successfully.
**/
EFI_STATUS
DuplicatePadId (
IN OUT EFI_IPSEC_CONFIG_SELECTOR *DstSel,
IN EFI_IPSEC_CONFIG_SELECTOR *SrcSel,
IN OUT UINTN *Size
);
/**
Fix the value of some members of the SPD Selector.
This function is called by IpSecCopyPolicyEntry(), which copies the Policy
Entry into the Variable. Since some members in SPD Selector are pointers,
a physical address to relative address conversion is required before copying
this SPD entry into the variable.
@param[in] Selector Pointer of SPD Selector.
@param[in, out] Data Pointer of SPD Data.
**/
VOID
FixSpdEntry (
IN EFI_IPSEC_SPD_SELECTOR *Selector,
IN OUT EFI_IPSEC_SPD_DATA *Data
);
/**
Fix the value of some members of SA ID.
This function is called by IpSecCopyPolicyEntry(), which copies the Policy
Entry into the Variable. Since some members in SA ID are pointers,
a physical address to relative address conversion is required before copying
this SAD into the variable.
@param[in] SaId Pointer of SA ID.
@param[in, out] Data Pointer of SA Data.
**/
VOID
FixSadEntry (
IN EFI_IPSEC_SA_ID *SaId,
IN OUT EFI_IPSEC_SA_DATA2 *Data
);
/**
Fix the value of some members of PAD ID.
This function is called by IpSecCopyPolicyEntry(), which copy the Policy
Entry into the Variable. Since some members in PAD ID are pointers,
a physical address to relative address conversion is required before copying
this PAD into the variable.
@param[in] PadId Pointer of PAD ID.
@param[in, out] Data Pointer of PAD Data.
**/
VOID
FixPadEntry (
IN EFI_IPSEC_PAD_ID *PadId,
IN OUT EFI_IPSEC_PAD_DATA *Data
);
/**
Recover the value of some members of SPD Selector.
This function is corresponding to FixSpdEntry(). It recovers the value of members
of SPD Selector which fix by the FixSpdEntry().
@param[in, out] Selector Pointer of SPD Selector.
@param[in, out] Data Pointer of SPD Data.
**/
VOID
UnfixSpdEntry (
IN OUT EFI_IPSEC_SPD_SELECTOR *Selector,
IN OUT EFI_IPSEC_SPD_DATA *Data
);
/**
Recover the value of some members of SA ID.
This function is corresponding to FixSadEntry(). It recovers the value of members
of SAD ID which fix by the FixSadEntry().
@param[in, out] SaId Pointer of SAD ID
@param[in, out] Data Pointer of SAD Data.
**/
VOID
UnfixSadEntry (
IN OUT EFI_IPSEC_SA_ID *SaId,
IN OUT EFI_IPSEC_SA_DATA2 *Data
);
/**
Recover the value of some members of PAD ID.
This function is corresponding to FixPadEntry(). It recovers the value of members
of PAD ID which fix by the FixPadEntry().
@param[in] PadId Pointer of PAD ID
@param[in, out] Data Pointer of PAD Data.
**/
VOID
UnfixPadEntry (
IN EFI_IPSEC_PAD_ID *PadId,
IN OUT EFI_IPSEC_PAD_DATA *Data
);
/**
Set the security policy information for the EFI IPsec driver.
The IPsec configuration data has a unique selector/identifier separately to
identify a data entry.
@param[in] Selector Pointer to an entry selector on operated
configuration data specified by DataType.
A NULL Selector causes the entire specified-type
configuration information to be flushed.
@param[in] Data The data buffer to be set. The structure
of the data buffer should be EFI_IPSEC_SPD_DATA.
@param[in] Context Pointer to one entry selector that describes
the expected position the new data entry will
be added. If Context is NULL,the new entry will
be appended the end of database.
@retval EFI_INVALID_PARAMETER One or more of the following are TRUE:
- Selector is not NULL and its LocalAddress
is NULL or its RemoteAddress is NULL.
- Data is not NULL, its Action is Protected,
and its policy is NULL.
- Data is not NULL and its Action is not protected
and its policy is not NULL.
- The Action of Data is Protected, its policy
mode is Tunnel, and its tunnel option is NULL.
- The Action of Data is protected, its policy
mode is not Tunnel, and it tunnel option is not NULL.
@retval EFI_OUT_OF_RESOURCED The required system resource could not be allocated.
@retval EFI_SUCCESS The specified configuration data was obtained successfully.
**/
EFI_STATUS
SetSpdEntry (
IN EFI_IPSEC_CONFIG_SELECTOR *Selector,
IN VOID *Data,
IN VOID *Context OPTIONAL
);
/**
Set the security association information for the EFI IPsec driver.
The IPsec configuration data has a unique selector/identifier separately to
identify a data entry.
@param[in] Selector Pointer to an entry selector on operated
configuration data specified by DataType.
A NULL Selector causes the entire specified-type
configuration information to be flushed.
@param[in] Data The data buffer to be set. The structure
of the data buffer should be EFI_IPSEC_SA_DATA.
@param[in] Context Pointer to one entry selector which describes
the expected position the new data entry will
be added. If Context is NULL,the new entry will
be appended to the end of database.
@retval EFI_OUT_OF_RESOURCED The required system resource could not be allocated.
@retval EFI_SUCCESS The specified configuration data was obtained successfully.
**/
EFI_STATUS
SetSadEntry (
IN EFI_IPSEC_CONFIG_SELECTOR *Selector,
IN VOID *Data,
IN VOID *Context OPTIONAL
);
/**
Set the peer authorization configuration information for the EFI IPsec driver.
The IPsec configuration data has a unique selector/identifier separately to
identify a data entry.
@param[in] Selector Pointer to an entry selector on operated
configuration data specified by DataType.
A NULL Selector causes the entire specified-type
configuration information to be flushed.
@param[in] Data The data buffer to be set. The structure
of the data buffer should be EFI_IPSEC_PAD_DATA.
@param[in] Context Pointer to one entry selector that describes
the expected position where the new data entry will
be added. If Context is NULL, the new entry will
be appended the end of database.
@retval EFI_OUT_OF_RESOURCED The required system resource could not be allocated.
@retval EFI_SUCCESS The specified configuration data was obtained successfully.
**/
EFI_STATUS
SetPadEntry (
IN EFI_IPSEC_CONFIG_SELECTOR *Selector,
IN VOID *Data,
IN VOID *Context OPTIONAL
);
/**
This function looks up the data entry from IPsec SPD, and returns the configuration
value of the specified SPD Entry.
@param[in] Selector Pointer to an entry selector which is an identifier
of the SPD entry.
@param[in, out] DataSize On output the size of data returned in Data.
@param[out] Data The buffer to return the contents of the IPsec
configuration data. The type of the data buffer
is associated with the DataType.
@retval EFI_SUCCESS The specified configuration data was obtained successfully.
@retval EFI_INVALID_PARAMETER Data is NULL and *DataSize is not zero.
@retval EFI_NOT_FOUND The configuration data specified by Selector is not found.
@retval EFI_BUFFER_TOO_SMALL The DataSize is too small for the result. DataSize has been
updated with the size needed to complete the request.
**/
EFI_STATUS
GetSpdEntry (
IN EFI_IPSEC_CONFIG_SELECTOR *Selector,
IN OUT UINTN *DataSize,
OUT VOID *Data
);
/**
This function looks up the data entry from IPsec SAD and returns the configuration
value of the specified SAD Entry.
@param[in] Selector Pointer to an entry selector that is an identifier
of the SAD entry.
@param[in, out] DataSize On output, the size of data returned in Data.
@param[out] Data The buffer to return the contents of the IPsec
configuration data. This type of the data buffer
is associated with the DataType.
@retval EFI_SUCCESS The specified configuration data was obtained successfully.
@retval EFI_NOT_FOUND The configuration data specified by Selector is not found.
@retval EFI_BUFFER_TOO_SMALL The DataSize is too small for the result. DataSize has been
updated with the size needed to complete the request.
**/
EFI_STATUS
GetSadEntry (
IN EFI_IPSEC_CONFIG_SELECTOR *Selector,
IN OUT UINTN *DataSize,
OUT VOID *Data
);
/**
This function looks up the data entry from IPsec PADand returns the configuration
value of the specified PAD Entry.
@param[in] Selector Pointer to an entry selector that is an identifier
of the PAD entry.
@param[in, out] DataSize On output the size of data returned in Data.
@param[out] Data The buffer to return the contents of the IPsec
configuration data. This type of the data buffer
is associated with the DataType.
@retval EFI_SUCCESS The specified configuration data was obtained successfully.
@retval EFI_NOT_FOUND The configuration data specified by Selector is not found.
@retval EFI_BUFFER_TOO_SMALL The DataSize is too small for the result. DataSize has been
updated with the size needed to complete the request.
**/
EFI_STATUS
GetPadEntry (
IN EFI_IPSEC_CONFIG_SELECTOR *Selector,
IN OUT UINTN *DataSize,
OUT VOID *Data
);
/**
Return the configuration value for the EFI IPsec driver.
This function lookup the data entry from IPsec database or IKEv2 configuration
information. The expected data type and unique identification are described in
DataType and Selector parameters.
@param[in] This Pointer to the EFI_IPSEC_CONFIG_PROTOCOL instance.
@param[in] DataType The type of data to retrieve.
@param[in] Selector Pointer to an entry selector that is an identifier of the IPsec
configuration data entry.
@param[in, out] DataSize On output the size of data returned in Data.
@param[out] Data The buffer to return the contents of the IPsec configuration data.
The type of the data buffer is associated with the DataType.
@retval EFI_SUCCESS The specified configuration data was obtained successfully.
@retval EFI_INVALID_PARAMETER One or more of the followings are TRUE:
- This is NULL.
- Selector is NULL.
- DataSize is NULL.
- Data is NULL and *DataSize is not zero
@retval EFI_NOT_FOUND The configuration data specified by Selector is not found.
@retval EFI_UNSUPPORTED The specified DataType is not supported.
@retval EFI_BUFFER_TOO_SMALL The DataSize is too small for the result. DataSize has been
updated with the size needed to complete the request.
**/
EFI_STATUS
EFIAPI
EfiIpSecConfigGetData (
IN EFI_IPSEC_CONFIG_PROTOCOL *This,
IN EFI_IPSEC_CONFIG_DATA_TYPE DataType,
IN EFI_IPSEC_CONFIG_SELECTOR *Selector,
IN OUT UINTN *DataSize,
OUT VOID *Data
);
/**
Set the security association, security policy and peer authorization configuration
information for the EFI IPsec driver.
This function is used to set the IPsec configuration information of type DataType for
the EFI IPsec driver.
The IPsec configuration data has a unique selector/identifier separately to identify
a data entry. The selector structure depends on DataType's definition.
Using SetData() with a Data of NULL causes the IPsec configuration data entry identified
by DataType and Selector to be deleted.
@param[in] This Pointer to the EFI_IPSEC_CONFIG_PROTOCOL instance.
@param[in] DataType The type of data to be set.
@param[in] Selector Pointer to an entry selector on operated configuration data
specified by DataType. A NULL Selector causes the entire
specified-type configuration information to be flushed.
@param[in] Data The data buffer to be set. The structure of the data buffer is
associated with the DataType.
@param[in] InsertBefore Pointer to one entry selector which describes the expected
position the new data entry will be added. If InsertBefore is NULL,
the new entry will be appended the end of database.
@retval EFI_SUCCESS The specified configuration entry data was set successfully.
@retval EFI_INVALID_PARAMETER One or more of the following are TRUE:
- This is NULL.
@retval EFI_UNSUPPORTED The specified DataType is not supported.
@retval EFI_OUT_OF_RESOURCED The required system resource could not be allocated.
**/
EFI_STATUS
EFIAPI
EfiIpSecConfigSetData (
IN EFI_IPSEC_CONFIG_PROTOCOL *This,
IN EFI_IPSEC_CONFIG_DATA_TYPE DataType,
IN EFI_IPSEC_CONFIG_SELECTOR *Selector,
IN VOID *Data,
IN EFI_IPSEC_CONFIG_SELECTOR *InsertBefore OPTIONAL
);
/**
Enumerates the current selector for IPsec configuration data entry.
This function is called multiple times to retrieve the entry Selector in IPsec
configuration database. On each call to GetNextSelector(), the next entry
Selector are retrieved into the output interface.
If the entire IPsec configuration database has been iterated, the error
EFI_NOT_FOUND is returned.
If the Selector buffer is too small for the next Selector copy, an
EFI_BUFFER_TOO_SMALL error is returned, and SelectorSize is updated to reflect
the size of buffer needed.
On the initial call to GetNextSelector() to start the IPsec configuration database
search, a pointer to the buffer with all zero value is passed in Selector. Calls
to SetData() between calls to GetNextSelector may produce unpredictable results.
@param[in] This Pointer to the EFI_IPSEC_CONFIG_PROTOCOL instance.
@param[in] DataType The type of IPsec configuration data to retrieve.
@param[in, out] SelectorSize The size of the Selector buffer.
@param[in, out] Selector On input, supplies the pointer to last Selector that was
returned by GetNextSelector().
On output, returns one copy of the current entry Selector
of a given DataType.
@retval EFI_SUCCESS The specified configuration data was obtained successfully.
@retval EFI_INVALID_PARAMETER One or more of the followings are TRUE:
- This is NULL.
- SelectorSize is NULL.
- Selector is NULL.
@retval EFI_NOT_FOUND The next configuration data entry was not found.
@retval EFI_UNSUPPORTED The specified DataType is not supported.
@retval EFI_BUFFER_TOO_SMALL The SelectorSize is too small for the result. This parameter
has been updated with the size needed to complete the search
request.
**/
EFI_STATUS
EFIAPI
EfiIpSecConfigGetNextSelector (
IN EFI_IPSEC_CONFIG_PROTOCOL *This,
IN EFI_IPSEC_CONFIG_DATA_TYPE DataType,
IN OUT UINTN *SelectorSize,
IN OUT EFI_IPSEC_CONFIG_SELECTOR *Selector
);
/**
Register an event that is to be signaled whenever a configuration process on the
specified IPsec configuration information is done.
The register function is not surpport now and always returns EFI_UNSUPPORTED.
@param[in] This Pointer to the EFI_IPSEC_CONFIG_PROTOCOL instance.
@param[in] DataType The type of data to be registered the event for.
@param[in] Event The event to be registered.
@retval EFI_SUCCESS The event is registered successfully.
@retval EFI_INVALID_PARAMETER This is NULL, or Event is NULL.
@retval EFI_ACCESS_DENIED The Event is already registered for the DataType.
@retval EFI_UNSUPPORTED The notify registration unsupported, or the specified
DataType is not supported.
**/
EFI_STATUS
EFIAPI
EfiIpSecConfigRegisterNotify (
IN EFI_IPSEC_CONFIG_PROTOCOL *This,
IN EFI_IPSEC_CONFIG_DATA_TYPE DataType,
IN EFI_EVENT Event
);
/**
Remove the specified event that was previously registered on the specified IPsec
configuration data.
This function is not supported now and always returns EFI_UNSUPPORTED.
@param[in] This Pointer to the EFI_IPSEC_CONFIG_PROTOCOL instance.
@param[in] DataType The configuration data type to remove the registered event for.
@param[in] Event The event to be unregistered.
@retval EFI_SUCCESS The event was removed successfully.
@retval EFI_NOT_FOUND The Event specified by DataType could not be found in the
database.
@retval EFI_INVALID_PARAMETER This is NULL or Event is NULL.
@retval EFI_UNSUPPORTED The notify registration unsupported or the specified
DataType is not supported.
**/
EFI_STATUS
EFIAPI
EfiIpSecConfigUnregisterNotify (
IN EFI_IPSEC_CONFIG_PROTOCOL *This,
IN EFI_IPSEC_CONFIG_DATA_TYPE DataType,
IN EFI_EVENT Event
);
extern LIST_ENTRY mConfigData[IPsecConfigDataTypeMaximum];
#endif