audk/IntelFrameworkModulePkg/Bus/Pci/IdeBusDxe/IdeBus.c

1521 lines
44 KiB
C

/** @file
This file implement UEFI driver for IDE Bus which includes device identification,
Child device(Disk, CDROM, etc) enumeration and child handler installation, and
driver stop.
Copyright (c) 2006 - 2008, Intel Corporation
All rights reserved. This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
@par Revision Reference:
This module is modified from DXE\IDE module for Ide Contriller Init support
**/
#include "IdeBus.h"
#define PCI_CLASS_MASS_STORAGE 0x01
#define PCI_SUB_CLASS_IDE 0x01
//
// IDE Bus Driver Binding Protocol Instance
//
EFI_DRIVER_BINDING_PROTOCOL gIDEBusDriverBinding = {
IDEBusDriverBindingSupported,
IDEBusDriverBindingStart,
IDEBusDriverBindingStop,
0xa,
NULL,
NULL
};
/**
Deregister an IDE device and free resources
@param This Protocol instance pointer.
@param Controller Ide device handle
@param Handle Handle of device to deregister driver on
@retval EFI_SUCCESS Deregiter a specific IDE device successfully
**/
EFI_STATUS
DeRegisterIdeDevice (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE Controller,
IN EFI_HANDLE Handle
)
{
EFI_STATUS Status;
EFI_BLOCK_IO_PROTOCOL *BlkIo;
IDE_BLK_IO_DEV *IdeBlkIoDevice;
EFI_PCI_IO_PROTOCOL *PciIo;
UINTN Index;
Status = gBS->OpenProtocol (
Handle,
&gEfiBlockIoProtocolGuid,
(VOID **) &BlkIo,
This->DriverBindingHandle,
Controller,
EFI_OPEN_PROTOCOL_GET_PROTOCOL
);
if (EFI_ERROR (Status)) {
return Status;
}
IdeBlkIoDevice = IDE_BLOCK_IO_DEV_FROM_THIS (BlkIo);
//
// Report Status code: Device disabled
//
REPORT_STATUS_CODE_WITH_DEVICE_PATH (
EFI_PROGRESS_CODE,
(EFI_IO_BUS_ATA_ATAPI | EFI_P_PC_DISABLE),
IdeBlkIoDevice->DevicePath
);
//
// Close the child handle
//
Status = gBS->CloseProtocol (
Controller,
&gEfiPciIoProtocolGuid,
This->DriverBindingHandle,
Handle
);
Status = gBS->UninstallMultipleProtocolInterfaces (
Handle,
&gEfiDevicePathProtocolGuid,
IdeBlkIoDevice->DevicePath,
&gEfiBlockIoProtocolGuid,
&IdeBlkIoDevice->BlkIo,
&gEfiDiskInfoProtocolGuid,
&IdeBlkIoDevice->DiskInfo,
NULL
);
if (EFI_ERROR (Status)) {
gBS->OpenProtocol (
Controller,
&gEfiPciIoProtocolGuid,
(VOID **) &PciIo,
This->DriverBindingHandle,
Handle,
EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER
);
return Status;
}
//
// Release allocated resources
//
Index = IdeBlkIoDevice->Channel * 2 + IdeBlkIoDevice->Device;
if (Index < MAX_IDE_DEVICE) {
IdeBlkIoDevice->IdeBusDriverPrivateData->HaveScannedDevice[Index] = FALSE;
}
ReleaseIdeResources (IdeBlkIoDevice);
return EFI_SUCCESS;
}
/**
Supported function of Driver Binding protocol for this driver.
@param This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
@param ControllerHandle The handle of the controller to test.
@param RemainingDevicePath A pointer to the remaining portion of a device path.
@retval EFI_SUCCESS Driver loaded.
@retval other Driver not loaded.
**/
EFI_STATUS
EFIAPI
IDEBusDriverBindingSupported (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE Controller,
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
)
{
EFI_STATUS Status;
EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath;
EFI_DEV_PATH *Node;
EFI_IDE_CONTROLLER_INIT_PROTOCOL *IdeInit;
if (RemainingDevicePath != NULL) {
Node = (EFI_DEV_PATH *) RemainingDevicePath;
if (Node->DevPath.Type != MESSAGING_DEVICE_PATH ||
Node->DevPath.SubType != MSG_ATAPI_DP ||
DevicePathNodeLength(&Node->DevPath) != sizeof(ATAPI_DEVICE_PATH)) {
return EFI_UNSUPPORTED;
}
}
//
// Open the IO Abstraction(s) needed to perform the supported test
//
Status = gBS->OpenProtocol (
Controller,
&gEfiDevicePathProtocolGuid,
(VOID **) &ParentDevicePath,
This->DriverBindingHandle,
Controller,
EFI_OPEN_PROTOCOL_BY_DRIVER
);
if (Status == EFI_ALREADY_STARTED) {
return EFI_SUCCESS;
}
if (EFI_ERROR (Status)) {
return Status;
}
//
// Close protocol, don't use device path protocol in the .Support() function
//
gBS->CloseProtocol (
Controller,
&gEfiDevicePathProtocolGuid,
This->DriverBindingHandle,
Controller
);
//
// Verify the Ide Controller Init Protocol, which installed by the
// IdeController module.
// Note 1: PciIo protocol has been opened BY_DRIVER by ide_init, so We can't
// open BY_DRIVER here) That's why we don't check pciio protocol
// Note 2: ide_init driver check ide controller's pci config space, so we dont
// check here any more to save code size
//
Status = gBS->OpenProtocol (
Controller,
&gEfiIdeControllerInitProtocolGuid,
(VOID **) &IdeInit,
This->DriverBindingHandle,
Controller,
EFI_OPEN_PROTOCOL_BY_DRIVER
);
if (Status == EFI_ALREADY_STARTED) {
return EFI_SUCCESS;
}
//
// If protocols were opened normally, closed it
//
gBS->CloseProtocol (
Controller,
&gEfiIdeControllerInitProtocolGuid,
This->DriverBindingHandle,
Controller
);
return Status;
}
/**
Start function of Driver binding protocol which start this driver on Controller
by detecting all disks and installing BlockIo protocol on them.
@param This Protocol instance pointer.
@param Controller Handle of device to bind driver to.
@param RemainingDevicePath produce all possible children.
@retval EFI_SUCCESS This driver is added to ControllerHandle.
@retval EFI_ALREADY_STARTED This driver is already running on ControllerHandle.
@retval other This driver does not support this device.
**/
EFI_STATUS
EFIAPI
IDEBusDriverBindingStart (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE Controller,
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
)
{
EFI_STATUS Status;
EFI_STATUS SavedStatus;
EFI_PCI_IO_PROTOCOL *PciIo;
EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath;
EFI_DEV_PATH *Node;
UINT8 IdeChannel;
UINT8 BeginningIdeChannel;
UINT8 EndIdeChannel;
UINT8 IdeDevice;
UINT8 BeginningIdeDevice;
UINT8 EndIdeDevice;
IDE_BLK_IO_DEV *IdeBlkIoDevice[IdeMaxChannel][IdeMaxDevice];
IDE_BLK_IO_DEV *IdeBlkIoDevicePtr;
IDE_REGISTERS_BASE_ADDR IdeRegsBaseAddr[IdeMaxChannel];
ATA_TRANSFER_MODE TransferMode;
ATA_DRIVE_PARMS DriveParameters;
EFI_DEV_PATH NewNode;
UINT8 ConfigurationOptions;
UINT16 CommandBlockBaseAddr;
UINT16 ControlBlockBaseAddr;
UINTN DataSize;
IDE_BUS_DRIVER_PRIVATE_DATA *IdeBusDriverPrivateData;
UINT64 Supports;
//
// Local variables declaration for IdeControllerInit support
//
EFI_IDE_CONTROLLER_INIT_PROTOCOL *IdeInit;
BOOLEAN EnumAll;
BOOLEAN ChannelEnabled;
UINT8 MaxDevices;
EFI_IDENTIFY_DATA IdentifyData;
EFI_ATA_COLLECTIVE_MODE *SupportedModes;
IdeBusDriverPrivateData = NULL;
SupportedModes = NULL;
//
// Perform IdeBus initialization
//
Status = gBS->OpenProtocol (
Controller,
&gEfiDevicePathProtocolGuid,
(VOID **) &ParentDevicePath,
This->DriverBindingHandle,
Controller,
EFI_OPEN_PROTOCOL_BY_DRIVER
);
if ((EFI_ERROR (Status)) && (Status != EFI_ALREADY_STARTED)) {
return Status;
}
//
// Now open the IDE_CONTROLLER_INIT protocol. Step7.1
//
Status = gBS->OpenProtocol (
Controller,
&gEfiIdeControllerInitProtocolGuid,
(VOID **) &IdeInit,
This->DriverBindingHandle,
Controller,
EFI_OPEN_PROTOCOL_BY_DRIVER
);
//
// The following OpenProtocol function with _GET_PROTOCOL attribute and
// will not return EFI_ALREADY_STARTED, so save it for now
//
SavedStatus = Status;
if ((EFI_ERROR (Status)) && (Status != EFI_ALREADY_STARTED)) {
DEBUG ((EFI_D_ERROR, "Open Init, Status=%x", Status));
//
// open protocol is not SUCCESS or not ALREADY_STARTED, error exit
//
goto ErrorExit;
}
//
// Save Enumall. Step7.2
//
EnumAll = IdeInit->EnumAll;
//
// Consume PCI I/O protocol. Note that the OpenProtocol with _GET_PROTOCOL
// attribute will not return EFI_ALREADY_STARTED
//
Status = gBS->OpenProtocol (
Controller,
&gEfiPciIoProtocolGuid,
(VOID **) &PciIo,
This->DriverBindingHandle,
Controller,
EFI_OPEN_PROTOCOL_GET_PROTOCOL
);
if (EFI_ERROR (Status)) {
DEBUG ((EFI_D_ERROR, "Open PciIo, Status=%x", Status));
goto ErrorExit;
}
//
// We must check EFI_ALREADY_STARTED because many ATAPI devices are removable
//
if (SavedStatus != EFI_ALREADY_STARTED) {
IdeBusDriverPrivateData = AllocatePool (sizeof (IDE_BUS_DRIVER_PRIVATE_DATA));
if (IdeBusDriverPrivateData == NULL) {
Status = EFI_OUT_OF_RESOURCES;
goto ErrorExit;
}
ZeroMem (IdeBusDriverPrivateData, sizeof (IDE_BUS_DRIVER_PRIVATE_DATA));
Status = gBS->InstallMultipleProtocolInterfaces (
&Controller,
&gEfiCallerIdGuid,
IdeBusDriverPrivateData,
NULL
);
if (EFI_ERROR (Status)) {
goto ErrorExit;
}
} else {
Status = gBS->OpenProtocol (
Controller,
&gEfiCallerIdGuid,
(VOID **) &IdeBusDriverPrivateData,
This->DriverBindingHandle,
Controller,
EFI_OPEN_PROTOCOL_GET_PROTOCOL
);
if (EFI_ERROR (Status)) {
IdeBusDriverPrivateData = NULL;
goto ErrorExit;
}
}
Status = PciIo->Attributes (
PciIo,
EfiPciIoAttributeOperationSupported,
0,
&Supports
);
if (!EFI_ERROR (Status)) {
Supports &= EFI_PCI_DEVICE_ENABLE;
Status = PciIo->Attributes (
PciIo,
EfiPciIoAttributeOperationEnable,
Supports,
NULL
);
}
if (EFI_ERROR (Status)) {
goto ErrorExit;
}
//
// Read the environment variable that contains the IDEBus Driver's
// Config options that were set by the Driver Configuration Protocol
//
DataSize = sizeof (ConfigurationOptions);
Status = gRT->GetVariable (
(CHAR16 *) L"Configuration",
&gEfiCallerIdGuid,
NULL,
&DataSize,
&ConfigurationOptions
);
if (EFI_ERROR (Status)) {
ConfigurationOptions = 0x0f;
}
if (EnumAll) {
//
// If IdeInit->EnumAll is TRUE, must enumerate all IDE device anyway
//
BeginningIdeChannel = IdePrimary;
EndIdeChannel = IdeSecondary;
BeginningIdeDevice = IdeMaster;
EndIdeDevice = IdeSlave;
} else if (RemainingDevicePath == NULL) {
//
// RemainingDevicePath is NULL, scan IDE bus for each device;
//
BeginningIdeChannel = IdePrimary;
EndIdeChannel = IdeSecondary;
BeginningIdeDevice = IdeMaster;
//
// default, may be redefined by IdeInit
//
EndIdeDevice = IdeSlave;
} else {
//
// RemainingDevicePath is not NULL, only scan the specified device.
//
Node = (EFI_DEV_PATH *) RemainingDevicePath;
BeginningIdeChannel = Node->Atapi.PrimarySecondary;
EndIdeChannel = BeginningIdeChannel;
BeginningIdeDevice = Node->Atapi.SlaveMaster;
EndIdeDevice = BeginningIdeDevice;
if (BeginningIdeChannel >= IdeMaxChannel || EndIdeChannel >= IdeMaxChannel) {
Status = EFI_INVALID_PARAMETER;
goto ErrorExit;
}
if (BeginningIdeDevice >= IdeMaxDevice|| EndIdeDevice >= IdeMaxDevice) {
Status = EFI_INVALID_PARAMETER;
goto ErrorExit;
}
}
//
// Obtain IDE IO port registers' base addresses
//
Status = GetIdeRegistersBaseAddr (PciIo, IdeRegsBaseAddr);
if (EFI_ERROR (Status)) {
goto ErrorExit;
}
//
// Report status code: begin IdeBus initialization
//
REPORT_STATUS_CODE_WITH_DEVICE_PATH (
EFI_PROGRESS_CODE,
(EFI_IO_BUS_ATA_ATAPI | EFI_IOB_PC_RESET),
ParentDevicePath
);
//
// Strictly follow the enumeration based on IDE_CONTROLLER_INIT protocol
//
for (IdeChannel = BeginningIdeChannel; IdeChannel <= EndIdeChannel; IdeChannel++) {
IdeInit->NotifyPhase (IdeInit, EfiIdeBeforeChannelEnumeration, IdeChannel);
//
// now obtain channel information fron IdeControllerInit protocol. Step9
//
Status = IdeInit->GetChannelInfo (
IdeInit,
IdeChannel,
&ChannelEnabled,
&MaxDevices
);
if (EFI_ERROR (Status)) {
DEBUG ((EFI_D_ERROR, "[GetChannel, Status=%x]", Status));
continue;
}
if (!ChannelEnabled) {
continue;
}
EndIdeDevice = (UINT8) MIN ((MaxDevices - 1), EndIdeDevice);
ASSERT (EndIdeDevice < IdeMaxDevice);
//
// Now inform the IDE Controller Init Module. Sept10
//
IdeInit->NotifyPhase (IdeInit, EfiIdeBeforeChannelReset, IdeChannel);
//
// No reset channel function implemented. Sept11
//
IdeInit->NotifyPhase (IdeInit, EfiIdeAfterChannelReset, IdeChannel);
//
// Step13
//
IdeInit->NotifyPhase (
IdeInit,
EfiIdeBusBeforeDevicePresenceDetection,
IdeChannel
);
//
// Prepare to detect IDE device of this channel
//
InitializeIDEChannelData ();
//
// -- 1st inner loop --- Master/Slave ------------ Step14
//
for (IdeDevice = BeginningIdeDevice; IdeDevice <= EndIdeDevice; IdeDevice++) {
//
// Check whether the configuration options allow this device
//
if ((ConfigurationOptions & (1 << (IdeChannel * 2 + IdeDevice))) == 0) {
continue;
}
//
// The device has been scanned in another Start(), No need to scan it again
// for perf optimization.
//
if (IdeBusDriverPrivateData->HaveScannedDevice[IdeChannel * 2 + IdeDevice]) {
continue;
}
//
// create child handle for the detected device.
//
IdeBlkIoDevice[IdeChannel][IdeDevice] = AllocatePool (sizeof (IDE_BLK_IO_DEV));
if (IdeBlkIoDevice[IdeChannel][IdeDevice] == NULL) {
continue;
}
IdeBlkIoDevicePtr = IdeBlkIoDevice[IdeChannel][IdeDevice];
ZeroMem (IdeBlkIoDevicePtr, sizeof (IDE_BLK_IO_DEV));
IdeBlkIoDevicePtr->Signature = IDE_BLK_IO_DEV_SIGNATURE;
IdeBlkIoDevicePtr->Channel = (EFI_IDE_CHANNEL) IdeChannel;
IdeBlkIoDevicePtr->Device = (EFI_IDE_DEVICE) IdeDevice;
//
// initialize Block IO interface's Media pointer
//
IdeBlkIoDevicePtr->BlkIo.Media = &IdeBlkIoDevicePtr->BlkMedia;
//
// Initialize IDE IO port addresses, including Command Block registers
// and Control Block registers
//
IdeBlkIoDevicePtr->IoPort = AllocatePool (sizeof (IDE_BASE_REGISTERS));
if (IdeBlkIoDevicePtr->IoPort == NULL) {
continue;
}
ZeroMem (IdeBlkIoDevicePtr->IoPort, sizeof (IDE_BASE_REGISTERS));
CommandBlockBaseAddr = IdeRegsBaseAddr[IdeChannel].CommandBlockBaseAddr;
ControlBlockBaseAddr = IdeRegsBaseAddr[IdeChannel].ControlBlockBaseAddr;
IdeBlkIoDevicePtr->IoPort->Data = CommandBlockBaseAddr;
(*(UINT16 *) &IdeBlkIoDevicePtr->IoPort->Reg1) = (UINT16) (CommandBlockBaseAddr + 0x01);
IdeBlkIoDevicePtr->IoPort->SectorCount = (UINT16) (CommandBlockBaseAddr + 0x02);
IdeBlkIoDevicePtr->IoPort->SectorNumber = (UINT16) (CommandBlockBaseAddr + 0x03);
IdeBlkIoDevicePtr->IoPort->CylinderLsb = (UINT16) (CommandBlockBaseAddr + 0x04);
IdeBlkIoDevicePtr->IoPort->CylinderMsb = (UINT16) (CommandBlockBaseAddr + 0x05);
IdeBlkIoDevicePtr->IoPort->Head = (UINT16) (CommandBlockBaseAddr + 0x06);
(*(UINT16 *) &IdeBlkIoDevicePtr->IoPort->Reg) = (UINT16) (CommandBlockBaseAddr + 0x07);
(*(UINT16 *) &IdeBlkIoDevicePtr->IoPort->Alt) = ControlBlockBaseAddr;
IdeBlkIoDevicePtr->IoPort->DriveAddress = (UINT16) (ControlBlockBaseAddr + 0x01);
IdeBlkIoDevicePtr->IoPort->MasterSlave = (UINT16) ((IdeDevice == IdeMaster) ? 1 : 0);
IdeBlkIoDevicePtr->PciIo = PciIo;
IdeBlkIoDevicePtr->IdeBusDriverPrivateData = IdeBusDriverPrivateData;
IdeBlkIoDevicePtr->IoPort->BusMasterBaseAddr = IdeRegsBaseAddr[IdeChannel].BusMasterBaseAddr;
//
// Report Status code: is about to detect IDE drive
//
REPORT_STATUS_CODE_EX (
EFI_PROGRESS_CODE,
(EFI_IO_BUS_ATA_ATAPI | EFI_P_PC_PRESENCE_DETECT),
0,
&gEfiCallerIdGuid,
NULL,
NULL,
0
);
//
// Discover device, now!
//
PERF_START (NULL, "DiscoverIdeDevice", "IDE", 0);
Status = DiscoverIdeDevice (IdeBlkIoDevicePtr);
PERF_END (NULL, "DiscoverIdeDevice", "IDE", 0);
IdeBusDriverPrivateData->HaveScannedDevice[IdeChannel * 2 + IdeDevice] = TRUE;
IdeBusDriverPrivateData->DeviceProcessed[IdeChannel * 2 + IdeDevice] = FALSE;
if (!EFI_ERROR (Status)) {
//
// Set Device Path
//
ZeroMem (&NewNode, sizeof (NewNode));
NewNode.DevPath.Type = MESSAGING_DEVICE_PATH;
NewNode.DevPath.SubType = MSG_ATAPI_DP;
SetDevicePathNodeLength (&NewNode.DevPath, sizeof (ATAPI_DEVICE_PATH));
NewNode.Atapi.PrimarySecondary = (UINT8) IdeBlkIoDevicePtr->Channel;
NewNode.Atapi.SlaveMaster = (UINT8) IdeBlkIoDevicePtr->Device;
NewNode.Atapi.Lun = IdeBlkIoDevicePtr->Lun;
IdeBlkIoDevicePtr->DevicePath = AppendDevicePathNode (
ParentDevicePath,
&NewNode.DevPath
);
if (IdeBlkIoDevicePtr->DevicePath == NULL) {
ReleaseIdeResources (IdeBlkIoDevicePtr);
continue;
}
//
// Submit identify data to IDE controller init driver
//
CopyMem (&IdentifyData, IdeBlkIoDevicePtr->IdData, sizeof (IdentifyData));
IdeBusDriverPrivateData->DeviceFound[IdeChannel * 2 + IdeDevice] = TRUE;
IdeInit->SubmitData (IdeInit, IdeChannel, IdeDevice, &IdentifyData);
} else {
//
// Device detection failed
//
IdeBusDriverPrivateData->DeviceFound[IdeChannel * 2 + IdeDevice] = FALSE;
IdeInit->SubmitData (IdeInit, IdeChannel, IdeDevice, NULL);
ReleaseIdeResources (IdeBlkIoDevicePtr);
IdeBlkIoDevicePtr = NULL;
}
//
// end of 1st inner loop ---
//
}
//
// end of 1st outer loop =========
//
}
//
// = 2nd outer loop == Primary/Secondary =================
//
for (IdeChannel = BeginningIdeChannel; IdeChannel <= EndIdeChannel; IdeChannel++) {
//
// -- 2nd inner loop --- Master/Slave --------
//
for (IdeDevice = BeginningIdeDevice; IdeDevice <= EndIdeDevice; IdeDevice++) {
if (IdeBusDriverPrivateData->DeviceProcessed[IdeChannel * 2 + IdeDevice]) {
continue;
}
if (!IdeBusDriverPrivateData->DeviceFound[IdeChannel * 2 + IdeDevice]) {
continue;
}
Status = IdeInit->CalculateMode (
IdeInit,
IdeChannel,
IdeDevice,
&SupportedModes
);
if (EFI_ERROR (Status)) {
DEBUG ((EFI_D_ERROR, "[bStStp20S=%x]", Status));
continue;
}
IdeBlkIoDevicePtr = IdeBlkIoDevice[IdeChannel][IdeDevice];
//
// Set best supported PIO mode on this IDE device
//
if (SupportedModes->PioMode.Mode <= AtaPioMode2) {
TransferMode.ModeCategory = ATA_MODE_CATEGORY_DEFAULT_PIO;
} else {
TransferMode.ModeCategory = ATA_MODE_CATEGORY_FLOW_PIO;
}
TransferMode.ModeNumber = (UINT8) (SupportedModes->PioMode.Mode);
if (SupportedModes->ExtModeCount == 0){
Status = SetDeviceTransferMode (IdeBlkIoDevicePtr, &TransferMode);
if (EFI_ERROR (Status)) {
IdeBusDriverPrivateData->DeviceFound[IdeChannel * 2 + IdeDevice] = FALSE;
ReleaseIdeResources (IdeBlkIoDevicePtr);
IdeBlkIoDevicePtr = NULL;
continue;
}
}
//
// Set supported DMA mode on this IDE device. Note that UDMA & MDMA cann't
// be set together. Only one DMA mode can be set to a device. If setting
// DMA mode operation fails, we can continue moving on because we only use
// PIO mode at boot time. DMA modes are used by certain kind of OS booting
//
if (SupportedModes->UdmaMode.Valid) {
TransferMode.ModeCategory = ATA_MODE_CATEGORY_UDMA;
TransferMode.ModeNumber = (UINT8) (SupportedModes->UdmaMode.Mode);
Status = SetDeviceTransferMode (IdeBlkIoDevicePtr, &TransferMode);
if (EFI_ERROR (Status)) {
IdeBusDriverPrivateData->DeviceFound[IdeChannel * 2 + IdeDevice] = FALSE;
ReleaseIdeResources (IdeBlkIoDevicePtr);
IdeBlkIoDevicePtr = NULL;
continue;
}
//
// Record Udma Mode
//
IdeBlkIoDevicePtr->UdmaMode.Valid = TRUE;
IdeBlkIoDevicePtr->UdmaMode.Mode = SupportedModes->UdmaMode.Mode;
EnableInterrupt (IdeBlkIoDevicePtr);
} else if (SupportedModes->MultiWordDmaMode.Valid) {
TransferMode.ModeCategory = ATA_MODE_CATEGORY_MDMA;
TransferMode.ModeNumber = (UINT8) SupportedModes->MultiWordDmaMode.Mode;
Status = SetDeviceTransferMode (IdeBlkIoDevicePtr, &TransferMode);
if (EFI_ERROR (Status)) {
IdeBusDriverPrivateData->DeviceFound[IdeChannel * 2 + IdeDevice] = FALSE;
ReleaseIdeResources (IdeBlkIoDevicePtr);
IdeBlkIoDevicePtr = NULL;
continue;
}
EnableInterrupt (IdeBlkIoDevicePtr);
}
//
// Init driver parameters
//
DriveParameters.Sector = (UINT8) IdeBlkIoDevicePtr->IdData->AtaData.sectors_per_track;
DriveParameters.Heads = (UINT8) (IdeBlkIoDevicePtr->IdData->AtaData.heads - 1);
DriveParameters.MultipleSector = (UINT8) IdeBlkIoDevicePtr->IdData->AtaData.multi_sector_cmd_max_sct_cnt;
//
// Set Parameters for the device:
// 1) Init
// 2) Establish the block count for READ/WRITE MULTIPLE (EXT) command
//
if ((IdeBlkIoDevicePtr->Type == IdeHardDisk) || (IdeBlkIoDevicePtr->Type == Ide48bitAddressingHardDisk)) {
Status = SetDriveParameters (IdeBlkIoDevicePtr, &DriveParameters);
}
//
// Record PIO mode used in private data
//
IdeBlkIoDevicePtr->PioMode = (ATA_PIO_MODE) SupportedModes->PioMode.Mode;
//
// Set IDE controller Timing Blocks in the PCI Configuration Space
//
IdeInit->SetTiming (IdeInit, IdeChannel, IdeDevice, SupportedModes);
//
// Add Component Name for the IDE/ATAPI device that was discovered.
//
IdeBlkIoDevicePtr->ControllerNameTable = NULL;
ADD_IDE_ATAPI_NAME (IdeBlkIoDevicePtr);
Status = gBS->InstallMultipleProtocolInterfaces (
&IdeBlkIoDevicePtr->Handle,
&gEfiDevicePathProtocolGuid,
IdeBlkIoDevicePtr->DevicePath,
&gEfiBlockIoProtocolGuid,
&IdeBlkIoDevicePtr->BlkIo,
&gEfiDiskInfoProtocolGuid,
&IdeBlkIoDevicePtr->DiskInfo,
NULL
);
if (EFI_ERROR (Status)) {
ReleaseIdeResources (IdeBlkIoDevicePtr);
}
gBS->OpenProtocol (
Controller,
&gEfiPciIoProtocolGuid,
(VOID **) &PciIo,
This->DriverBindingHandle,
IdeBlkIoDevicePtr->Handle,
EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER
);
IdeBusDriverPrivateData->DeviceProcessed[IdeChannel * 2 + IdeDevice] = TRUE;
//
// Report status code: device eanbled!
//
REPORT_STATUS_CODE_WITH_DEVICE_PATH (
EFI_PROGRESS_CODE,
(EFI_IO_BUS_ATA_ATAPI | EFI_P_PC_ENABLE),
IdeBlkIoDevicePtr->DevicePath
);
//
// Create event to clear pending IDE interrupt
//
Status = gBS->CreateEventEx (
EVT_NOTIFY_SIGNAL,
TPL_NOTIFY,
ClearInterrupt,
IdeBlkIoDevicePtr,
&gEfiEventExitBootServicesGuid,
&IdeBlkIoDevicePtr->ExitBootServiceEvent
);
//
// end of 2nd inner loop ----
//
}
//
// end of 2nd outer loop ==========
//
}
//
// All configurations done! Notify IdeController to do post initialization
// work such as saving IDE controller PCI settings for S3 resume
//
IdeInit->NotifyPhase (IdeInit, EfiIdeBusPhaseMaximum, 0);
if (SupportedModes != NULL) {
gBS->FreePool (SupportedModes);
}
PERF_START (NULL, "Finish IDE detection", "IDE", 1);
PERF_END (NULL, "Finish IDE detection", "IDE", 0);
return EFI_SUCCESS;
ErrorExit:
//
// Report error code: controller error
//
REPORT_STATUS_CODE_WITH_DEVICE_PATH (
EFI_ERROR_CODE | EFI_ERROR_MINOR,
(EFI_IO_BUS_ATA_ATAPI | EFI_IOB_EC_CONTROLLER_ERROR),
ParentDevicePath
);
gBS->CloseProtocol (
Controller,
&gEfiIdeControllerInitProtocolGuid,
This->DriverBindingHandle,
Controller
);
gBS->UninstallMultipleProtocolInterfaces (
Controller,
&gEfiCallerIdGuid,
IdeBusDriverPrivateData,
NULL
);
if (IdeBusDriverPrivateData != NULL) {
gBS->FreePool (IdeBusDriverPrivateData);
}
if (SupportedModes != NULL) {
gBS->FreePool (SupportedModes);
}
gBS->CloseProtocol (
Controller,
&gEfiPciIoProtocolGuid,
This->DriverBindingHandle,
Controller
);
gBS->CloseProtocol (
Controller,
&gEfiDevicePathProtocolGuid,
This->DriverBindingHandle,
Controller
);
return Status;
}
/**
Stop function of Driver Binding Protocol which is to stop the driver on Controller Handle and all
child handle attached to the controller handle if there are.
@param This Protocol instance pointer.
@param Controller Handle of device to stop driver on
@param NumberOfChildren Not used
@param ChildHandleBuffer Not used
@retval EFI_SUCCESS This driver is removed DeviceHandle
@retval other This driver was not removed from this device
**/
EFI_STATUS
EFIAPI
IDEBusDriverBindingStop (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE Controller,
IN UINTN NumberOfChildren,
IN EFI_HANDLE *ChildHandleBuffer
)
{
EFI_STATUS Status;
EFI_PCI_IO_PROTOCOL *PciIo;
BOOLEAN AllChildrenStopped;
UINTN Index;
IDE_BUS_DRIVER_PRIVATE_DATA *IdeBusDriverPrivateData;
UINT64 Supports;
IdeBusDriverPrivateData = NULL;
if (NumberOfChildren == 0) {
Status = gBS->OpenProtocol (
Controller,
&gEfiPciIoProtocolGuid,
(VOID **) &PciIo,
This->DriverBindingHandle,
Controller,
EFI_OPEN_PROTOCOL_GET_PROTOCOL
);
if (!EFI_ERROR (Status)) {
Status = PciIo->Attributes (
PciIo,
EfiPciIoAttributeOperationSupported,
0,
&Supports
);
if (!EFI_ERROR (Status)) {
Supports &= EFI_PCI_IO_ATTRIBUTE_IDE_PRIMARY_IO | EFI_PCI_IO_ATTRIBUTE_IDE_SECONDARY_IO | EFI_PCI_DEVICE_ENABLE;
PciIo->Attributes (
PciIo,
EfiPciIoAttributeOperationDisable,
Supports,
NULL
);
}
}
gBS->OpenProtocol (
Controller,
&gEfiCallerIdGuid,
(VOID **) &IdeBusDriverPrivateData,
This->DriverBindingHandle,
Controller,
EFI_OPEN_PROTOCOL_GET_PROTOCOL
);
gBS->UninstallMultipleProtocolInterfaces (
Controller,
&gEfiCallerIdGuid,
IdeBusDriverPrivateData,
NULL
);
if (IdeBusDriverPrivateData != NULL) {
gBS->FreePool (IdeBusDriverPrivateData);
}
//
// Close the bus driver
//
gBS->CloseProtocol (
Controller,
&gEfiIdeControllerInitProtocolGuid,
This->DriverBindingHandle,
Controller
);
gBS->CloseProtocol (
Controller,
&gEfiPciIoProtocolGuid,
This->DriverBindingHandle,
Controller
);
gBS->CloseProtocol (
Controller,
&gEfiDevicePathProtocolGuid,
This->DriverBindingHandle,
Controller
);
return EFI_SUCCESS;
}
AllChildrenStopped = TRUE;
for (Index = 0; Index < NumberOfChildren; Index++) {
Status = DeRegisterIdeDevice (This, Controller, ChildHandleBuffer[Index]);
if (EFI_ERROR (Status)) {
AllChildrenStopped = FALSE;
}
}
if (!AllChildrenStopped) {
return EFI_DEVICE_ERROR;
}
return EFI_SUCCESS;
}
/**
issue ATA or ATAPI command to reset a block IO device.
@param This Block IO protocol instance pointer.
@param ExtendedVerification If FALSE,for ATAPI device, driver will only invoke ATAPI reset method
If TRUE, for ATAPI device, driver need invoke ATA reset method after
invoke ATAPI reset method
@retval EFI_DEVICE_ERROR When the device is neighther ATA device or ATAPI device.
@retval EFI_SUCCESS The device reset successfully
**/
EFI_STATUS
EFIAPI
IDEBlkIoReset (
IN EFI_BLOCK_IO_PROTOCOL *This,
IN BOOLEAN ExtendedVerification
)
{
IDE_BLK_IO_DEV *IdeBlkIoDevice;
EFI_STATUS Status;
EFI_TPL OldTpl;
OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
IdeBlkIoDevice = IDE_BLOCK_IO_DEV_FROM_THIS (This);
//
// Requery IDE IO resources in case of the switch of native and legacy modes
//
ReassignIdeResources (IdeBlkIoDevice);
//
// for ATA device, using ATA reset method
//
if (IdeBlkIoDevice->Type == IdeHardDisk ||
IdeBlkIoDevice->Type == Ide48bitAddressingHardDisk) {
Status = AtaSoftReset (IdeBlkIoDevice);
goto Done;
}
if (IdeBlkIoDevice->Type == IdeUnknown) {
Status = EFI_DEVICE_ERROR;
goto Done;
}
//
// for ATAPI device, using ATAPI reset method
//
Status = AtapiSoftReset (IdeBlkIoDevice);
if (ExtendedVerification) {
Status = AtaSoftReset (IdeBlkIoDevice);
}
Done:
gBS->RestoreTPL (OldTpl);
return Status;
}
/**
Read data from a block IO device
@param This Block IO protocol instance pointer.
@param MediaId The media ID of the device
@param Lba Starting LBA address to read data
@param BufferSize The size of data to be read
@param Buffer Caller supplied buffer to save data
@retval EFI_DEVICE_ERROR unknown device type
@retval other read data status.
**/
EFI_STATUS
EFIAPI
IDEBlkIoReadBlocks (
IN EFI_BLOCK_IO_PROTOCOL *This,
IN UINT32 MediaId,
IN EFI_LBA Lba,
IN UINTN BufferSize,
OUT VOID *Buffer
)
{
IDE_BLK_IO_DEV *IdeBlkIoDevice;
EFI_STATUS Status;
EFI_TPL OldTpl;
OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
IdeBlkIoDevice = IDE_BLOCK_IO_DEV_FROM_THIS (This);
//
// Requery IDE IO resources in case of the switch of native and legacy modes
//
ReassignIdeResources (IdeBlkIoDevice);
//
// For ATA compatible device, use ATA read block's mechanism
//
if (IdeBlkIoDevice->Type == IdeHardDisk ||
IdeBlkIoDevice->Type == Ide48bitAddressingHardDisk) {
Status = AtaBlkIoReadBlocks (
IdeBlkIoDevice,
MediaId,
Lba,
BufferSize,
Buffer
);
goto Done;
}
if (IdeBlkIoDevice->Type == IdeUnknown) {
Status = EFI_DEVICE_ERROR;
goto Done;
}
//
// for ATAPI device, using ATAPI read block's mechanism
//
Status = AtapiBlkIoReadBlocks (
IdeBlkIoDevice,
MediaId,
Lba,
BufferSize,
Buffer
);
Done:
gBS->RestoreTPL (OldTpl);
return Status;
}
/**
Write data to block io device.
@param This Protocol instance pointer.
@param MediaId The media ID of the device
@param Lba Starting LBA address to write data
@param BufferSize The size of data to be written
@param Buffer Caller supplied buffer to save data
@retval EFI_DEVICE_ERROR unknown device type
@retval other write data status
**/
EFI_STATUS
EFIAPI
IDEBlkIoWriteBlocks (
IN EFI_BLOCK_IO_PROTOCOL *This,
IN UINT32 MediaId,
IN EFI_LBA Lba,
IN UINTN BufferSize,
IN VOID *Buffer
)
{
IDE_BLK_IO_DEV *IdeBlkIoDevice;
EFI_STATUS Status;
EFI_TPL OldTpl;
OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
IdeBlkIoDevice = IDE_BLOCK_IO_DEV_FROM_THIS (This);
//
// Requery IDE IO resources in case of the switch of native and legacy modes
//
ReassignIdeResources (IdeBlkIoDevice);
//
// for ATA device, using ATA write block's mechanism
//
if (IdeBlkIoDevice->Type == IdeHardDisk ||
IdeBlkIoDevice->Type == Ide48bitAddressingHardDisk) {
Status = AtaBlkIoWriteBlocks (
IdeBlkIoDevice,
MediaId,
Lba,
BufferSize,
Buffer
);
goto Done;
}
if (IdeBlkIoDevice->Type == IdeUnknown) {
Status = EFI_DEVICE_ERROR;
goto Done;
}
//
// for ATAPI device, using ATAPI write block's mechanism
//
Status = AtapiBlkIoWriteBlocks (
IdeBlkIoDevice,
MediaId,
Lba,
BufferSize,
Buffer
);
Done:
gBS->RestoreTPL (OldTpl);
return Status;
}
/**
Flushes all modified data to a physical block devices
@param This Indicates a pointer to the calling context which to sepcify a
sepcific block device
@retval EFI_SUCCESS Always return success.
**/
EFI_STATUS
EFIAPI
IDEBlkIoFlushBlocks (
IN EFI_BLOCK_IO_PROTOCOL *This
)
{
//
// return directly
//
return EFI_SUCCESS;
}
/**
This function is used by the IDE bus driver to get inquiry data.
Data format of Identify data is defined by the Interface GUID.
@param This Pointer to the EFI_DISK_INFO_PROTOCOL instance.
@param InquiryData Pointer to a buffer for the inquiry data.
@param InquiryDataSize Pointer to the value for the inquiry data size.
@retval EFI_SUCCESS The command was accepted without any errors.
@retval EFI_NOT_FOUND Device does not support this data class
@retval EFI_DEVICE_ERROR Error reading InquiryData from device
@retval EFI_BUFFER_TOO_SMALL IntquiryDataSize not big enough
**/
EFI_STATUS
EFIAPI
IDEDiskInfoInquiry (
IN EFI_DISK_INFO_PROTOCOL *This,
IN OUT VOID *InquiryData,
IN OUT UINT32 *InquiryDataSize
)
{
IDE_BLK_IO_DEV *IdeBlkIoDevice;
IdeBlkIoDevice = IDE_BLOCK_IO_DEV_FROM_DISK_INFO_THIS (This);
if (*InquiryDataSize < sizeof (ATAPI_INQUIRY_DATA)) {
*InquiryDataSize = sizeof (ATAPI_INQUIRY_DATA);
return EFI_BUFFER_TOO_SMALL;
}
if (IdeBlkIoDevice->InquiryData == NULL) {
return EFI_NOT_FOUND;
}
gBS->CopyMem (InquiryData, IdeBlkIoDevice->InquiryData, sizeof (ATAPI_INQUIRY_DATA));
*InquiryDataSize = sizeof (ATAPI_INQUIRY_DATA);
return EFI_SUCCESS;
}
/**
This function is used by the IDE bus driver to get identify data.
Data format of Identify data is defined by the Interface GUID.
@param This Pointer to the EFI_DISK_INFO_PROTOCOL instance.
@param IdentifyData Pointer to a buffer for the identify data.
@param IdentifyDataSize Pointer to the value for the identify data size.
@retval EFI_SUCCESS The command was accepted without any errors.
@retval EFI_NOT_FOUND Device does not support this data class
@retval EFI_DEVICE_ERROR Error reading IdentifyData from device
@retval EFI_BUFFER_TOO_SMALL IdentifyDataSize not big enough
**/
EFI_STATUS
EFIAPI
IDEDiskInfoIdentify (
IN EFI_DISK_INFO_PROTOCOL *This,
IN OUT VOID *IdentifyData,
IN OUT UINT32 *IdentifyDataSize
)
{
IDE_BLK_IO_DEV *IdeBlkIoDevice;
IdeBlkIoDevice = IDE_BLOCK_IO_DEV_FROM_DISK_INFO_THIS (This);
if (*IdentifyDataSize < sizeof (EFI_IDENTIFY_DATA)) {
*IdentifyDataSize = sizeof (EFI_IDENTIFY_DATA);
return EFI_BUFFER_TOO_SMALL;
}
if (IdeBlkIoDevice->IdData == NULL) {
return EFI_NOT_FOUND;
}
gBS->CopyMem (IdentifyData, IdeBlkIoDevice->IdData, sizeof (EFI_IDENTIFY_DATA));
*IdentifyDataSize = sizeof (EFI_IDENTIFY_DATA);
return EFI_SUCCESS;
}
/**
This function is used by the IDE bus driver to get sense data.
Data format of Sense data is defined by the Interface GUID.
@param This Pointer to the EFI_DISK_INFO_PROTOCOL instance.
@param SenseData Pointer to the SenseData.
@param SenseDataSize Size of SenseData in bytes.
@param SenseDataNumber Pointer to the value for the identify data size.
@retval EFI_SUCCESS The command was accepted without any errors.
@retval EFI_NOT_FOUND Device does not support this data class
@retval EFI_DEVICE_ERROR Error reading InquiryData from device
@retval EFI_BUFFER_TOO_SMALL SenseDataSize not big enough
**/
EFI_STATUS
EFIAPI
IDEDiskInfoSenseData (
IN EFI_DISK_INFO_PROTOCOL *This,
IN OUT VOID *SenseData,
IN OUT UINT32 *SenseDataSize,
OUT UINT8 *SenseDataNumber
)
{
return EFI_NOT_FOUND;
}
/**
This function is used by the IDE bus driver to get controller information.
@param This Pointer to the EFI_DISK_INFO_PROTOCOL instance.
@param IdeChannel Pointer to the Ide Channel number. Primary or secondary.
@param IdeDevice Pointer to the Ide Device number. Master or slave.
@retval EFI_SUCCESS IdeChannel and IdeDevice are valid
@retval EFI_UNSUPPORTED This is not an IDE device
**/
EFI_STATUS
EFIAPI
IDEDiskInfoWhichIde (
IN EFI_DISK_INFO_PROTOCOL *This,
OUT UINT32 *IdeChannel,
OUT UINT32 *IdeDevice
)
{
IDE_BLK_IO_DEV *IdeBlkIoDevice;
IdeBlkIoDevice = IDE_BLOCK_IO_DEV_FROM_DISK_INFO_THIS (This);
*IdeChannel = IdeBlkIoDevice->Channel;
*IdeDevice = IdeBlkIoDevice->Device;
return EFI_SUCCESS;
}
/**
The is an event(generally the event is exitBootService event) call back function.
Clear pending IDE interrupt before OS loader/kernel take control of the IDE device.
@param Event Pointer to this event
@param Context Event hanlder private data
**/
VOID
EFIAPI
ClearInterrupt (
IN EFI_EVENT Event,
IN VOID *Context
)
{
EFI_STATUS Status;
UINT64 IoPortForBmis;
UINT8 RegisterValue;
IDE_BLK_IO_DEV *IdeDev;
//
// Get our context
//
IdeDev = (IDE_BLK_IO_DEV *) Context;
//
// Obtain IDE IO port registers' base addresses
//
Status = ReassignIdeResources (IdeDev);
if (EFI_ERROR (Status)) {
return;
}
//
// Check whether interrupt is pending
//
//
// Reset IDE device to force it de-assert interrupt pin
// Note: this will reset all devices on this IDE channel
//
AtaSoftReset (IdeDev);
if (EFI_ERROR (Status)) {
return;
}
//
// Get base address of IDE Bus Master Status Regsiter
//
if (IdePrimary == IdeDev->Channel) {
IoPortForBmis = IdeDev->IoPort->BusMasterBaseAddr + BMISP_OFFSET;
} else {
if (IdeSecondary == IdeDev->Channel) {
IoPortForBmis = IdeDev->IoPort->BusMasterBaseAddr + BMISS_OFFSET;
} else {
return;
}
}
//
// Read BMIS register and clear ERROR and INTR bit
//
IdeDev->PciIo->Io.Read (
IdeDev->PciIo,
EfiPciIoWidthUint8,
EFI_PCI_IO_PASS_THROUGH_BAR,
IoPortForBmis,
1,
&RegisterValue
);
RegisterValue |= (BMIS_INTERRUPT | BMIS_ERROR);
IdeDev->PciIo->Io.Write (
IdeDev->PciIo,
EfiPciIoWidthUint8,
EFI_PCI_IO_PASS_THROUGH_BAR,
IoPortForBmis,
1,
&RegisterValue
);
//
// Select the other device on this channel to ensure this device to release the interrupt pin
//
if (IdeDev->Device == 0) {
RegisterValue = (1 << 4) | 0xe0;
} else {
RegisterValue = (0 << 4) | 0xe0;
}
IDEWritePortB (
IdeDev->PciIo,
IdeDev->IoPort->Head,
RegisterValue
);
}
/**
The user Entry Point for module IdeBus. The user code starts with this function.
@param[in] ImageHandle The firmware allocated handle for the EFI image.
@param[in] SystemTable A pointer to the EFI System Table.
@retval EFI_SUCCESS The entry point is executed successfully.
@retval other Some error occurs when executing this entry point.
**/
EFI_STATUS
EFIAPI
InitializeIdeBus(
IN EFI_HANDLE ImageHandle,
IN EFI_SYSTEM_TABLE *SystemTable
)
{
EFI_STATUS Status;
//
// Install driver model protocol(s).
//
Status = EfiLibInstallAllDriverProtocols2 (
ImageHandle,
SystemTable,
&gIDEBusDriverBinding,
ImageHandle,
&gIDEBusComponentName,
&gIDEBusComponentName2,
NULL,
NULL,
&gIDEBusDriverDiagnostics,
&gIDEBusDriverDiagnostics2
);
ASSERT_EFI_ERROR (Status);
return Status;
}