audk/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMass.h

144 lines
4.6 KiB
C++

/** @file
Copyright (c) 2007, Intel Corporation
All rights reserved. This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
Module Name:
UsbMass.h
Abstract:
Defination for the USB mass storage class driver. The USB mass storage
class is specified in two layers: the bottom layer is the transportation
protocol. The top layer is the command set. The transportation layer
provides the transportation of the command, data and result. The command
set defines what the command, data and result. The Bulk-Only-Transport and
Control/Bulk/Interrupt transport are two transportation protocol. USB mass
storage class adopts various industrial standard as its command set.
Revision History
**/
#ifndef _EFI_USBMASS_H_
#define _EFI_USBMASS_H_
#include <PiDxe.h>
#include <Protocol/BlockIo.h>
#include <Protocol/UsbIo.h>
#include <Library/DebugLib.h>
#include <Library/BaseMemoryLib.h>
#include <Library/UefiDriverEntryPoint.h>
#include <Library/UefiBootServicesTableLib.h>
#include <Library/UefiLib.h>
#include <Library/MemoryAllocationLib.h>
#define USB_IS_IN_ENDPOINT(EndPointAddr) (((EndPointAddr) & 0x80) == 0x80)
#define USB_IS_OUT_ENDPOINT(EndPointAddr) (((EndPointAddr) & 0x80) == 0)
#define USB_IS_BULK_ENDPOINT(Attribute) (((Attribute) & 0x03) == 0x02)
#define USB_IS_INTERRUPT_ENDPOINT(Attribute) (((Attribute) & 0x03) == 0x03)
#define USB_IS_ERROR(Result, Error) (((Result) & (Error)) != 0)
enum {
//
// Usb mass storage class code
//
USB_MASS_STORE_CLASS = 0x08,
//
// Usb mass storage subclass code, specify the command set used.
//
USB_MASS_STORE_RBC = 0x01, // Reduced Block Commands
USB_MASS_STORE_8020I = 0x02, // SFF-8020i, typically a CD/DVD device
USB_MASS_STORE_QIC = 0x03, // Typically a tape device
USB_MASS_STORE_UFI = 0x04, // Typically a floopy disk driver device
USB_MASS_STORE_8070I = 0x05, // SFF-8070i, typically a floppy disk driver device.
USB_MASS_STORE_SCSI = 0x06, // SCSI transparent command set
//
// Usb mass storage protocol code, specify the transport protocol
//
USB_MASS_STORE_CBI0 = 0x00, // CBI protocol with command completion interrupt
USB_MASS_STORE_CBI1 = 0x01, // CBI protocol without command completion interrupt
USB_MASS_STORE_BOT = 0x50, // Bulk-Only Transport
USB_MASS_STALL_1_MS = 1000,
USB_MASS_STALL_1_S = 1000 * USB_MASS_STALL_1_MS,
USB_MASS_CMD_SUCCESS = 0,
USB_MASS_CMD_FAIL,
USB_MASS_CMD_PERSISTENT
};
typedef
EFI_STATUS
(*USB_MASS_INIT_TRANSPORT) (
IN EFI_USB_IO_PROTOCOL *Usb,
IN EFI_HANDLE Controller,
OUT VOID **Context OPTIONAL
);
typedef
EFI_STATUS
(*USB_MASS_EXEC_COMMAND) (
IN VOID *Context,
IN VOID *Cmd,
IN UINT8 CmdLen,
IN EFI_USB_DATA_DIRECTION DataDir,
IN VOID *Data,
IN UINT32 DataLen,
IN UINT32 Timeout,
OUT UINT32 *CmdStatus
);
typedef
EFI_STATUS
(*USB_MASS_RESET) (
IN VOID *Context,
IN BOOLEAN ExtendedVerification
);
typedef
EFI_STATUS
(*USB_MASS_FINI) (
IN VOID *Context
);
//
// This structure contains information necessary to select the
// proper transport protocol. The mass storage class defines
// two transport protocols. One is the CBI, and the other is BOT.
// CBI is being obseleted. The design is made modular by this
// structure so that the CBI protocol can be easily removed when
// it is no longer necessary.
//
typedef struct {
UINT8 Protocol;
USB_MASS_INIT_TRANSPORT Init; // Initialize the mass storage transport protocol
USB_MASS_EXEC_COMMAND ExecCommand; // Transport command to the device then get result
USB_MASS_RESET Reset; // Reset the device
USB_MASS_FINI Fini; // Clean up the resources.
} USB_MASS_TRANSPORT;
EFI_STATUS
UsbClearEndpointStall (
IN EFI_USB_IO_PROTOCOL *UsbIo,
IN UINT8 EndpointAddress
);
extern UINTN mUsbMscInfo;
extern UINTN mUsbMscError;
#endif