audk/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassBot.h

103 lines
3.1 KiB
C

/** @file
Copyright (c) 2007, Intel Corporation
All rights reserved. This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
Module Name:
UsbMassBot.h
Abstract:
Defination for the USB mass storage Bulk-Only Transport protocol.
This implementation is based on the "Universal Serial Bus Mass
Storage Class Bulk-Only Transport" Revision 1.0, September 31, 1999.
Revision History
**/
#ifndef _EFI_USBMASS_BOT_H_
#define _EFI_USBMASS_BOT_H_
enum {
//
// Usb Bulk-Only class specfic request
//
USB_BOT_RESET_REQUEST = 0xFF, // Bulk-Only Mass Storage Reset
USB_BOT_GETLUN_REQUEST = 0xFE, // Get Max Lun
USB_BOT_CBW_SIGNATURE = 0x43425355, // dCBWSignature, tag the packet as CBW
USB_BOT_CSW_SIGNATURE = 0x53425355, // dCSWSignature, tag the packet as CSW
USB_BOT_MAX_LUN = 0x0F, // Lun number is from 0 to 15
USB_BOT_MAX_CMDLEN = 16, // Maxium number of command from command set
//
// Usb BOT command block status values
//
USB_BOT_COMMAND_OK = 0x00, // Command passed, good status
USB_BOT_COMMAND_FAILED = 0x01, // Command failed
USB_BOT_COMMAND_ERROR = 0x02, // Phase error, need to reset the device
//
// Usb Bot retry times
//
USB_BOT_GET_STATUS_RETRY = 3,
//
// Usb Bot stall time
//
USB_BOT_RESET_STALL = 100 * USB_MASS_STALL_1_MS,
//
// Usb Bot transfer timeout
//
USB_BOT_CBW_TIMEOUT = 1 * USB_MASS_STALL_1_S,
USB_BOT_CSW_TIMEOUT = 1 * USB_MASS_STALL_1_S,
USB_BOT_RESET_TIMEOUT = 3 * USB_MASS_STALL_1_S
};
//
// The CBW (Command Block Wrapper) and CSW (Command Status Wrapper)
// structures used by the Usb BOT protocol.
//
#pragma pack(1)
typedef struct {
UINT32 Signature;
UINT32 Tag;
UINT32 DataLen; // Length of data between CBW and CSW
UINT8 Flag; // Bit 7, 0 ~ Data-Out, 1 ~ Data-In
UINT8 Lun; // Lun number. Bits 0~3 are used
UINT8 CmdLen; // Length of the command. Bits 0~4 are used
UINT8 CmdBlock[USB_BOT_MAX_CMDLEN];
} USB_BOT_CBW;
typedef struct {
UINT32 Signature;
UINT32 Tag;
UINT32 DataResidue;
UINT8 CmdStatus;
} USB_BOT_CSW;
#pragma pack()
//
// Put Interface at the first field is to make it easy to get by Context, which
// could be BOT/CBI Protocol instance
//
typedef struct {
EFI_USB_INTERFACE_DESCRIPTOR Interface;
EFI_USB_ENDPOINT_DESCRIPTOR *BulkInEndpoint;
EFI_USB_ENDPOINT_DESCRIPTOR *BulkOutEndpoint;
UINT32 CbwTag;
EFI_USB_IO_PROTOCOL *UsbIo;
} USB_BOT_PROTOCOL;
extern USB_MASS_TRANSPORT mUsbBotTransport;
#endif